Clean up, primarily KNF.
This commit is contained in:
scottr
parent
60188b5bd2
commit
47b5b87d08
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: joy.c,v 1.1 1996/03/27 19:16:00 perry Exp $ */
|
||||
/* $NetBSD: joy.c,v 1.2 1996/04/01 06:39:17 scottr Exp $ */
|
||||
|
||||
/*-
|
||||
* Copyright (c) 1995 Jean-Marc Zucconi
|
||||
|
|
@ -31,130 +31,129 @@
|
|||
*
|
||||
*/
|
||||
|
||||
#include <errno.h>
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/device.h>
|
||||
#include <sys/errno.h>
|
||||
|
||||
#include <machine/cpu.h>
|
||||
#include <machine/pio.h>
|
||||
#include <machine/cpufunc.h>
|
||||
|
||||
#include <machine/joystick.h>
|
||||
|
||||
#include <dev/isa/isavar.h>
|
||||
#include <dev/isa/isareg.h>
|
||||
#include <i386/isa/timerreg.h>
|
||||
|
||||
/* The game port can manage 4 buttons and 4 variable resistors (usually 2
|
||||
|
||||
/*
|
||||
* The game port can manage 4 buttons and 4 variable resistors (usually 2
|
||||
* joysticks, each with 2 buttons and 2 pots.) via the port at address 0x201.
|
||||
* Getting the state of the buttons is done by reading the game port:
|
||||
* Getting the state of the buttons is done by reading the game port;
|
||||
* buttons 1-4 correspond to bits 4-7 and resistors 1-4 (X1, Y1, X2, Y2)
|
||||
* to bits 0-3.
|
||||
* if button 1 (resp 2, 3, 4) is pressed, the bit 4 (resp 5, 6, 7) is set to 0
|
||||
* to get the value of a resistor, write the value 0xff at port and
|
||||
* wait until the corresponding bit returns to 0.
|
||||
* to bits 0-3. If button 1 (resp 2, 3, 4) is pressed, the bit 4 (resp 5,
|
||||
* 6, 7) is set to 0 to get the value of a resistor, write the value 0xff
|
||||
* at port and wait until the corresponding bit returns to 0.
|
||||
*/
|
||||
|
||||
|
||||
/* the formulae below only work if u is ``not too large''. See also
|
||||
* the discussion in microtime.s */
|
||||
#define usec2ticks(u) (((u) * 19549)>>14)
|
||||
#define ticks2usec(u) (((u) * 3433)>>12)
|
||||
/*
|
||||
* The formulae below only work if u is ``not too large''. See also
|
||||
* the discussion in microtime.s
|
||||
*/
|
||||
#define USEC2TICKS(u) (((u) * 19549) >> 14)
|
||||
#define TICKS2USEC(u) (((u) * 3433) >> 12)
|
||||
|
||||
|
||||
#define joypart(d) minor(d)&1
|
||||
#define JOYUNIT(d) minor(d)>>1&3
|
||||
#define JOYPART(d) minor(d) & 1
|
||||
#define JOYUNIT(d) minor(d) >> 1 & 3
|
||||
|
||||
#ifndef JOY_TIMEOUT
|
||||
#define JOY_TIMEOUT 2000 /* 2 milliseconds */
|
||||
#define JOY_TIMEOUT 2000 /* 2 milliseconds */
|
||||
#endif
|
||||
|
||||
#define JOY_NPORTS 1
|
||||
|
||||
struct joy_softc {
|
||||
struct device sc_dev;
|
||||
int port;
|
||||
int x_off[2], y_off[2];
|
||||
int timeout[2];
|
||||
struct device sc_dev;
|
||||
int port;
|
||||
int x_off[2], y_off[2];
|
||||
int timeout[2];
|
||||
};
|
||||
|
||||
|
||||
int joyprobe __P((struct device *, void *, void *));
|
||||
void joyattach __P((struct device *, struct device *, void *));
|
||||
int joyopen __P((dev_t, int, int, struct proc *));
|
||||
int joyclose __P((dev_t, int, int, struct proc *));
|
||||
static int get_tick __P((void));
|
||||
int joyprobe __P((struct device *, void *, void *));
|
||||
void joyattach __P((struct device *, struct device *, void *));
|
||||
int joyopen __P((dev_t, int, int, struct proc *));
|
||||
int joyclose __P((dev_t, int, int, struct proc *));
|
||||
static int get_tick __P((void));
|
||||
|
||||
struct cfattach joy_ca = {
|
||||
sizeof(struct joy_softc), joyprobe, joyattach
|
||||
sizeof(struct joy_softc), joyprobe, joyattach
|
||||
};
|
||||
|
||||
struct cfdriver joy_cd = {
|
||||
NULL, "joy", DV_DULL
|
||||
NULL, "joy", DV_DULL
|
||||
};
|
||||
|
||||
|
||||
int
|
||||
joyprobe (parent, match, aux)
|
||||
struct device *parent;
|
||||
void *match, *aux;
|
||||
|
||||
joyprobe(parent, match, aux)
|
||||
struct device *parent;
|
||||
void *match, *aux;
|
||||
{
|
||||
struct isa_attach_args *ia = aux;
|
||||
int iobase = ia->ia_iobase;
|
||||
struct isa_attach_args *ia = aux;
|
||||
int iobase = ia->ia_iobase;
|
||||
|
||||
#ifdef WANT_JOYSTICK_CONNECTED
|
||||
outb (iobase, 0xff);
|
||||
DELAY (10000); /* 10 ms delay */
|
||||
return (inb (iobase) & 0x0f) != 0x0f;
|
||||
outb(iobase, 0xff);
|
||||
DELAY(10000); /* 10 ms delay */
|
||||
return (inb(iobase) & 0x0f) != 0x0f;
|
||||
#else
|
||||
ia->ia_iosize = JOY_NPORTS;
|
||||
ia->ia_msize = 0;
|
||||
return 1;
|
||||
ia->ia_iosize = JOY_NPORTS;
|
||||
ia->ia_msize = 0;
|
||||
return 1;
|
||||
#endif
|
||||
}
|
||||
|
||||
void
|
||||
joyattach (parent, self, aux)
|
||||
struct device *parent, *self;
|
||||
void *aux;
|
||||
joyattach(parent, self, aux)
|
||||
struct device *parent, *self;
|
||||
void *aux;
|
||||
{
|
||||
struct joy_softc *sc = (void *)self;
|
||||
struct isa_attach_args *ia = aux;
|
||||
int unit = sc->sc_dev.dv_unit;
|
||||
int iobase = ia->ia_iobase;
|
||||
|
||||
sc->port = iobase;
|
||||
sc->timeout[0] = sc->timeout[1] = 0;
|
||||
outb (iobase, 0xff);
|
||||
DELAY (10000); /* 10 ms delay */
|
||||
printf(": joystick%sconnected\n",
|
||||
(inb (iobase) & 0x0f) == 0x0f ? " not " : " ");
|
||||
struct joy_softc *sc = (void *) self;
|
||||
struct isa_attach_args *ia = aux;
|
||||
int unit = sc->sc_dev.dv_unit;
|
||||
int iobase = ia->ia_iobase;
|
||||
|
||||
sc->port = iobase;
|
||||
sc->timeout[0] = sc->timeout[1] = 0;
|
||||
outb(iobase, 0xff);
|
||||
DELAY(10000); /* 10 ms delay */
|
||||
printf(": joystick%sconnected\n",
|
||||
(inb(iobase) & 0x0f) == 0x0f ? " not " : " ");
|
||||
}
|
||||
|
||||
int
|
||||
joyopen (dev, flag, mode, p)
|
||||
dev_t dev;
|
||||
int flag, mode;
|
||||
struct proc *p;
|
||||
joyopen(dev, flag, mode, p)
|
||||
dev_t dev;
|
||||
int flag, mode;
|
||||
struct proc *p;
|
||||
{
|
||||
int unit = JOYUNIT (dev);
|
||||
int i = joypart (dev);
|
||||
struct joy_softc *sc;
|
||||
int unit = JOYUNIT(dev);
|
||||
int i = JOYPART(dev);
|
||||
struct joy_softc *sc;
|
||||
|
||||
if (unit >= joy_cd.cd_ndevs) {
|
||||
return(ENXIO);
|
||||
}
|
||||
sc = joy_cd.cd_devs[unit];
|
||||
if (unit >= joy_cd.cd_ndevs)
|
||||
return (ENXIO);
|
||||
|
||||
if (sc->timeout[i]) {
|
||||
return EBUSY;
|
||||
}
|
||||
sc->x_off[i] = sc->y_off[i] = 0;
|
||||
sc->timeout[i] = JOY_TIMEOUT;
|
||||
return 0;
|
||||
sc = joy_cd.cd_devs[unit];
|
||||
|
||||
if (sc->timeout[i])
|
||||
return EBUSY;
|
||||
|
||||
sc->x_off[i] = sc->y_off[i] = 0;
|
||||
sc->timeout[i] = JOY_TIMEOUT;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int
|
||||
|
|
@ -163,12 +162,12 @@ joyclose(dev, flag, mode, p)
|
|||
int flag, mode;
|
||||
struct proc *p;
|
||||
{
|
||||
int unit = JOYUNIT (dev);
|
||||
int i = joypart (dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
int unit = JOYUNIT(dev);
|
||||
int i = JOYPART(dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
|
||||
sc->timeout[i] = 0;
|
||||
return 0;
|
||||
sc->timeout[i] = 0;
|
||||
return 0;
|
||||
}
|
||||
|
||||
int
|
||||
|
|
@ -177,93 +176,90 @@ joyread(dev, uio, flag)
|
|||
struct uio *uio;
|
||||
int flag;
|
||||
{
|
||||
int unit = JOYUNIT(dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
int port = sc->port;
|
||||
int i, t0, t1;
|
||||
int state = 0, x = 0, y = 0;
|
||||
struct joystick c;
|
||||
int unit = JOYUNIT(dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
struct joystick c;
|
||||
int port = sc->port;
|
||||
int i, t0, t1;
|
||||
int state = 0, x = 0, y = 0;
|
||||
|
||||
disable_intr ();
|
||||
outb (port, 0xff);
|
||||
t0 = get_tick ();
|
||||
t1 = t0;
|
||||
i = usec2ticks(sc->timeout[joypart(dev)]);
|
||||
while (t0-t1 < i) {
|
||||
state = inb (port);
|
||||
if (joypart(dev) == 1)
|
||||
state >>= 2;
|
||||
t1 = get_tick ();
|
||||
if (t1 > t0)
|
||||
t1 -= TIMER_FREQ/hz;
|
||||
if (!x && !(state & 0x01))
|
||||
x = t1;
|
||||
if (!y && !(state & 0x02))
|
||||
y = t1;
|
||||
if (x && y)
|
||||
break;
|
||||
}
|
||||
enable_intr ();
|
||||
c.x = x ? sc->x_off[joypart(dev)] + ticks2usec(t0-x) : 0x80000000;
|
||||
c.y = y ? sc->y_off[joypart(dev)] + ticks2usec(t0-y) : 0x80000000;
|
||||
state >>= 4;
|
||||
c.b1 = ~state & 1;
|
||||
c.b2 = ~(state >> 1) & 1;
|
||||
return uiomove ((caddr_t)&c, sizeof(struct joystick), uio);
|
||||
disable_intr();
|
||||
outb(port, 0xff);
|
||||
t0 = get_tick();
|
||||
t1 = t0;
|
||||
i = USEC2TICKS(sc->timeout[JOYPART(dev)]);
|
||||
while (t0 - t1 < i) {
|
||||
state = inb(port);
|
||||
if (JOYPART(dev) == 1)
|
||||
state >>= 2;
|
||||
t1 = get_tick();
|
||||
if (t1 > t0)
|
||||
t1 -= TIMER_FREQ / hz;
|
||||
if (!x && !(state & 0x01))
|
||||
x = t1;
|
||||
if (!y && !(state & 0x02))
|
||||
y = t1;
|
||||
if (x && y)
|
||||
break;
|
||||
}
|
||||
enable_intr();
|
||||
c.x = x ? sc->x_off[JOYPART(dev)] + TICKS2USEC(t0 - x) : 0x80000000;
|
||||
c.y = y ? sc->y_off[JOYPART(dev)] + TICKS2USEC(t0 - y) : 0x80000000;
|
||||
state >>= 4;
|
||||
c.b1 = ~state & 1;
|
||||
c.b2 = ~(state >> 1) & 1;
|
||||
return uiomove((caddr_t) & c, sizeof(struct joystick), uio);
|
||||
}
|
||||
|
||||
int
|
||||
joyioctl(dev, cmd, data, flag, p)
|
||||
dev_t dev;
|
||||
u_long cmd;
|
||||
caddr_t data;
|
||||
int flag;
|
||||
struct proc *p;
|
||||
dev_t dev;
|
||||
u_long cmd;
|
||||
caddr_t data;
|
||||
int flag;
|
||||
struct proc *p;
|
||||
{
|
||||
int unit = JOYUNIT (dev);
|
||||
int i = joypart (dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
int x;
|
||||
|
||||
switch (cmd) {
|
||||
case JOY_SETTIMEOUT:
|
||||
x = *(int *) data;
|
||||
if (x < 1 || x > 10000) /* 10ms maximum! */
|
||||
return EINVAL;
|
||||
sc->timeout[i] = x;
|
||||
break;
|
||||
case JOY_GETTIMEOUT:
|
||||
*(int *) data = sc->timeout[i];
|
||||
break;
|
||||
case JOY_SET_X_OFFSET:
|
||||
sc->x_off[i] = *(int *) data;
|
||||
break;
|
||||
case JOY_SET_Y_OFFSET:
|
||||
sc->y_off[i] = *(int *) data;
|
||||
break;
|
||||
case JOY_GET_X_OFFSET:
|
||||
*(int *) data = sc->x_off[i];
|
||||
break;
|
||||
case JOY_GET_Y_OFFSET:
|
||||
*(int *) data = sc->y_off[i];
|
||||
break;
|
||||
default:
|
||||
return ENXIO;
|
||||
}
|
||||
return 0;
|
||||
int unit = JOYUNIT(dev);
|
||||
struct joy_softc *sc = joy_cd.cd_devs[unit];
|
||||
int i = JOYPART(dev);
|
||||
int x;
|
||||
|
||||
switch (cmd) {
|
||||
case JOY_SETTIMEOUT:
|
||||
x = *(int *) data;
|
||||
if (x < 1 || x > 10000) /* 10ms maximum! */
|
||||
return EINVAL;
|
||||
sc->timeout[i] = x;
|
||||
break;
|
||||
case JOY_GETTIMEOUT:
|
||||
*(int *) data = sc->timeout[i];
|
||||
break;
|
||||
case JOY_SET_X_OFFSET:
|
||||
sc->x_off[i] = *(int *) data;
|
||||
break;
|
||||
case JOY_SET_Y_OFFSET:
|
||||
sc->y_off[i] = *(int *) data;
|
||||
break;
|
||||
case JOY_GET_X_OFFSET:
|
||||
*(int *) data = sc->x_off[i];
|
||||
break;
|
||||
case JOY_GET_Y_OFFSET:
|
||||
*(int *) data = sc->y_off[i];
|
||||
break;
|
||||
default:
|
||||
return ENXIO;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
get_tick ()
|
||||
get_tick()
|
||||
{
|
||||
int low, high;
|
||||
int low, high;
|
||||
|
||||
outb (TIMER_MODE, TIMER_SEL0);
|
||||
low = inb (TIMER_CNTR0);
|
||||
high = inb (TIMER_CNTR0);
|
||||
outb(TIMER_MODE, TIMER_SEL0);
|
||||
low = inb(TIMER_CNTR0);
|
||||
high = inb(TIMER_CNTR0);
|
||||
|
||||
return (high << 8) | low;
|
||||
return (high << 8) | low;
|
||||
}
|
||||
|
||||
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue