Implement uplcom_intr().

use interrupt pipe of USB serial adapter
This commit is contained in:
ichiro 2001-03-14 15:53:01 +00:00
parent c08eec9f47
commit 38bf48d59a

View File

@ -1,10 +1,10 @@
/* $NetBSD: uplcom.c,v 1.11 2001/01/30 13:17:43 ichiro Exp $ */
/* $NetBSD: uplcom.c,v 1.12 2001/03/14 15:53:01 ichiro Exp $ */
/*
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by FUKUHARA ichiro (ichiro@ichiro.org).
* by Ichiro FUKUHARA (ichiro@ichiro.org).
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
@ -46,6 +46,7 @@
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/ioctl.h>
#include <sys/conf.h>
#include <sys/tty.h>
@ -69,7 +70,7 @@
#ifdef UPLCOM_DEBUG
#define DPRINTFN(n, x) if (uplcomdebug > (n)) logprintf x
int uplcomdebug = 0xff;
int uplcomdebug = 0;
#else
#define DPRINTFN(n, x)
#endif
@ -80,6 +81,9 @@ int uplcomdebug = 0xff;
#define UPLCOM_SECOND_IFACE_INDEX 1
#define UPLCOM_RESET 0
#define RSAQ_STATUS_DSR 0x02
#define RSAQ_STATUS_DCD 0x01
struct uplcom_softc {
USBBASEDEVICE sc_dev; /* base device */
usbd_device_handle sc_udev; /* USB device */
@ -87,13 +91,22 @@ struct uplcom_softc {
usbd_interface_handle sc_sec_iface; /* second interface */
int sc_iface_number; /* interface number */
int sc_intr_number; /* interrupt number */
usbd_pipe_handle sc_intr_pipe; /* interrupt pipe */
u_char *sc_intr_buf; /* interrupt buffer */
int sc_isize;
usb_cdc_line_state_t sc_line_state; /* current line state */
u_char sc_dtr; /* current DTR state */
u_char sc_rts; /* current RTS state */
u_char sc_status;
device_ptr_t sc_subdev;
device_ptr_t sc_subdev; /* ucom device */
u_char sc_dying;
u_char sc_lsr; /* Local status register */
u_char sc_msr; /* uplcom status register */
};
/*
@ -106,21 +119,26 @@ struct uplcom_softc {
Static usbd_status uplcom_reset(struct uplcom_softc *);
Static usbd_status uplcom_set_line_coding(struct uplcom_softc *sc,
usb_cdc_line_state_t *state);
Static void uplcom_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static void uplcom_set(void *, int, int, int);
Static void uplcom_dtr(struct uplcom_softc *, int);
Static void uplcom_rts(struct uplcom_softc *, int);
Static void uplcom_break(struct uplcom_softc *, int);
Static void uplcom_set_line_state(struct uplcom_softc *);
Static int uplcom_param(void *, int, struct termios *);
Static int uplcom_open(void *, int);
Static void uplcom_close(void *, int);
Static void uplcom_set(void *, int, int, int);
Static void uplcom_dtr(struct uplcom_softc *, int);
Static void uplcom_rts(struct uplcom_softc *, int);
Static void uplcom_break(struct uplcom_softc *, int);
Static void uplcom_set_line_state(struct uplcom_softc *);
Static void uplcom_get_status(void *, int portno, u_char *lsr, u_char *msr);
#if TODO
Static int uplcom_ioctl(void *, int, u_long, caddr_t, int, struct proc *);
#endif
Static int uplcom_param(void *, int, struct termios *);
Static int uplcom_open(void *, int);
Static void uplcom_close(void *, int);
struct ucom_methods uplcom_methods = {
NULL,
uplcom_get_status,
uplcom_set,
uplcom_param,
NULL,
NULL, /* uplcom_ioctl, TODO */
uplcom_open,
uplcom_close,
NULL,
@ -161,7 +179,6 @@ USB_ATTACH(uplcom)
{
USB_ATTACH_START(uplcom, sc, uaa);
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usb_config_descriptor_t *cdesc;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
@ -206,7 +223,7 @@ USB_ATTACH(uplcom)
USB_ATTACH_ERROR_RETURN;
}
/*
* check second of interface
* check second interface
* USB-RSAQ has two interface
*/
if (cdesc->bNumInterface == 2) {
@ -217,18 +234,19 @@ USB_ATTACH(uplcom)
devname, usbd_errstr(err));
USB_ATTACH_ERROR_RETURN;
}
iface = sc->sc_sec_iface;
} else
iface = sc->sc_iface;
sc->sc_iface = sc->sc_sec_iface;
}
/* Find the bulk endpoints */
id = usbd_get_interface_descriptor(iface);
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
uca.bulkin = uca.bulkout = -1;
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
USBDEVNAME(sc->sc_dev), i);
@ -240,8 +258,8 @@ USB_ATTACH(uplcom)
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
DPRINTF(("interrupt endpoint addr = 0x%x\n",
ed->bEndpointAddress));
sc->sc_intr_number = ed->bEndpointAddress;
sc->sc_isize = UGETW(ed->wMaxPacketSize);
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
@ -260,7 +278,13 @@ USB_ATTACH(uplcom)
USB_ATTACH_ERROR_RETURN;
}
sc->sc_dtr = -1;
if (sc->sc_intr_number== -1) {
printf("%s: Could not find interrupt in\n",
USBDEVNAME(sc->sc_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->sc_dtr = sc->sc_rts = -1;
uca.portno = UCOM_UNK_PORTNO;
/* bulkin, bulkout set above */
uca.ibufsize = UPLCOMIBUFSIZE;
@ -268,7 +292,7 @@ USB_ATTACH(uplcom)
uca.ibufsizepad = UPLCOMIBUFSIZE;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = iface;
uca.iface = sc->sc_iface;
uca.methods = &uplcom_methods;
uca.arg = sc;
uca.info = NULL;
@ -284,7 +308,8 @@ USB_ATTACH(uplcom)
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
USBDEV(sc->sc_dev));
DPRINTF(("uplcom: in=0x%x out=0x%x\n", uca.bulkin, uca.bulkout));
DPRINTF(("uplcom: in=0x%x out=0x%x intr=0x%x\n",
uca.bulkin, uca.bulkout, sc->sc_intr_number ));
sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);
USB_ATTACH_SUCCESS_RETURN;
@ -296,6 +321,14 @@ USB_DETACH(uplcom)
int rv = 0;
DPRINTF(("uplcom_detach: sc=%p flags=%d\n", sc, flags));
if (sc->sc_intr_pipe != NULL) {
usbd_abort_pipe(sc->sc_intr_pipe);
usbd_close_pipe(sc->sc_intr_pipe);
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
sc->sc_dying = 1;
if (sc->sc_subdev != NULL) {
rv = config_detach(sc->sc_subdev, flags);
@ -508,18 +541,26 @@ int
uplcom_open(void *addr, int portno)
{
struct uplcom_softc *sc = addr;
usbd_status err;
int err;
if (sc->sc_dying)
return (EIO);
err = uplcom_reset(sc);
if (err) {
printf("%s: reset failed, %s\n", USBDEVNAME(sc->sc_dev),
usbd_errstr(err));
}
DPRINTF(("uplcom_open: sc=%p\n", sc));
DPRINTF(("uplcom_open: open\n"));
if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
sc->sc_status = 0; /* clear status bit */
sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
err = usbd_open_pipe_intr(sc->sc_iface, sc->sc_intr_number,
USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc,
sc->sc_intr_buf, sc->sc_isize,
uplcom_intr, USBD_DEFAULT_INTERVAL);
if (err) {
DPRINTF(("%s: cannot open interrupt pipe (addr %d)\n",
USBDEVNAME(sc->sc_dev), sc->sc_intr_number));
return (EIO);
}
}
return (0);
}
@ -528,16 +569,98 @@ void
uplcom_close(void *addr, int portno)
{
struct uplcom_softc *sc = addr;
usbd_status err;
int err;
if (sc->sc_dying)
return;
err = uplcom_reset(sc);
if (err) {
printf("%s: reset failed, %s\n", USBDEVNAME(sc->sc_dev),
usbd_errstr(err));
DPRINTF(("uplcom_close: close\n"));
if (sc->sc_intr_pipe != NULL) {
err = usbd_abort_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: abort interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
err = usbd_close_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: close interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(err));
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
}
void
uplcom_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct uplcom_softc *sc = priv;
u_char *buf = sc->sc_intr_buf;
u_char pstatus;
if (sc->sc_dying)
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
DPRINTF(("%s: abnormal status: %s\n", USBDEVNAME(sc->sc_dev),
usbd_errstr(status)));
usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
return;
}
DPRINTF(("uplcom_close: close\n"));
DPRINTF(("%s: uplcom status = %02x\n", USBDEVNAME(sc->sc_dev), buf[8]));
sc->sc_lsr = sc->sc_msr = 0;
pstatus = buf[8];
if (ISSET(pstatus, RSAQ_STATUS_DSR))
sc->sc_msr |= UMSR_DSR;
if (ISSET(pstatus, RSAQ_STATUS_DCD))
sc->sc_msr |= UMSR_DCD;
ucom_status_change((struct ucom_softc *) sc->sc_subdev);
}
void
uplcom_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
{
struct uplcom_softc *sc = addr;
DPRINTF(("uplcom_get_status:\n"));
if (lsr != NULL)
*lsr = sc->sc_lsr;
if (msr != NULL)
*msr = sc->sc_msr;
}
#if TODO
int
uplcom_ioctl(void *addr, int portno, u_long cmd, caddr_t data, int flag,
struct proc *p)
{
struct uplcom_softc *sc = addr;
int error = 0;
if (sc->sc_dying)
return (EIO);
DPRINTF(("uplcom_ioctl: cmd=0x%08lx\n", cmd));
switch (cmd) {
case TIOCNOTTY:
case TIOCMGET:
case TIOCMSET:
case USB_GET_CM_OVER_DATA:
case USB_SET_CM_OVER_DATA:
break;
default:
DPRINTF(("uplcom_ioctl: unknown\n"));
error = ENOTTY;
break;
}
return (error);
}
#endif