Add a DPT ISA HBA frontend, tested lightly with a PM2021A/9X. There are some
issues.
This commit is contained in:
parent
50062f0914
commit
28fc2b2ee8
|
@ -0,0 +1,321 @@
|
|||
/* $NetBSD: dpt_isa.c,v 1.1 2000/02/24 18:49:06 ad Exp $ */
|
||||
|
||||
/*
|
||||
* Copyright (c) 1999, 2000 Andy Doran <ad@NetBSD.org>
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*
|
||||
*/
|
||||
|
||||
/*
|
||||
* ISA front-end for DPT EATA SCSI driver.
|
||||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__KERNEL_RCSID(0, "$NetBSD: dpt_isa.c,v 1.1 2000/02/24 18:49:06 ad Exp $");
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/device.h>
|
||||
|
||||
#include <machine/bus.h>
|
||||
#include <machine/intr.h>
|
||||
|
||||
#include <dev/scsipi/scsi_all.h>
|
||||
#include <dev/scsipi/scsipi_all.h>
|
||||
#include <dev/scsipi/scsiconf.h>
|
||||
|
||||
#include <dev/isa/isareg.h>
|
||||
#include <dev/isa/isavar.h>
|
||||
|
||||
#include <dev/isa/isadmareg.h>
|
||||
#include <dev/isa/isadmavar.h>
|
||||
|
||||
#include <dev/ic/dptreg.h>
|
||||
#include <dev/ic/dptvar.h>
|
||||
|
||||
#define DPT_ISA_IOSIZE 16
|
||||
#define DPT_ISA_MAXCCBS 16
|
||||
|
||||
static int dpt_isa_match __P((struct device *, struct cfdata *, void *));
|
||||
static void dpt_isa_attach __P((struct device *, struct device *, void *));
|
||||
static int dpt_isa_probe __P((struct isa_attach_args *, int));
|
||||
static int dpt_isa_wait __P((bus_space_handle_t, bus_space_tag_t, u_int8_t,
|
||||
u_int8_t));
|
||||
|
||||
struct cfattach dpt_isa_ca = {
|
||||
sizeof(struct dpt_softc), dpt_isa_match, dpt_isa_attach
|
||||
};
|
||||
|
||||
/* Try 'less intrusive' addresses first */
|
||||
static int dpt_isa_iobases[] = { 0x230, 0x330, 0x1f0, 0x170, -1 };
|
||||
|
||||
/*
|
||||
* Wait for the HBA status register to reach a specific state.
|
||||
*/
|
||||
static int
|
||||
dpt_isa_wait(ioh, iot, mask, state)
|
||||
bus_space_handle_t ioh;
|
||||
bus_space_tag_t iot;
|
||||
u_int8_t mask, state;
|
||||
{
|
||||
int ms;
|
||||
|
||||
for (ms = 2000 * 10; ms; ms--) {
|
||||
if ((bus_space_read_1(iot, ioh, HA_STATUS) & mask) == state)
|
||||
return (0);
|
||||
DELAY(100);
|
||||
}
|
||||
return (-1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Match a supported board.
|
||||
*/
|
||||
static int
|
||||
dpt_isa_match(parent, match, aux)
|
||||
struct device *parent;
|
||||
struct cfdata *match;
|
||||
void *aux;
|
||||
{
|
||||
struct isa_attach_args *ia;
|
||||
int i;
|
||||
|
||||
ia = aux;
|
||||
|
||||
if (ia->ia_iobase == ISACF_PORT_DEFAULT) {
|
||||
for (i = 0; dpt_isa_iobases[i] != -1; i++) {
|
||||
if (dpt_isa_probe(ia, dpt_isa_iobases[i])) {
|
||||
ia->ia_iobase = dpt_isa_iobases[i];
|
||||
return (1);
|
||||
}
|
||||
}
|
||||
} else if (dpt_isa_probe(ia, ia->ia_iobase))
|
||||
return (1);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Probe for a supported board.
|
||||
*/
|
||||
static int
|
||||
dpt_isa_probe(ia, iobase)
|
||||
struct isa_attach_args *ia;
|
||||
int iobase;
|
||||
{
|
||||
struct eata_cfg ec;
|
||||
bus_space_handle_t ioh;
|
||||
bus_space_tag_t iot;
|
||||
int i, j, stat;
|
||||
u_int16_t *p;
|
||||
|
||||
iot = ia->ia_iot;
|
||||
|
||||
if (bus_space_map(iot, iobase, DPT_ISA_IOSIZE, 0, &ioh) != 0)
|
||||
return(0);
|
||||
|
||||
/*
|
||||
* Assumuing the DPT BIOS reset the board, we shouldn't need to
|
||||
* re-do it here. The tests below should weed out non-EATA devices
|
||||
* before we start poking any registers.
|
||||
*/
|
||||
for (i = 1000; i; i--) {
|
||||
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_READY) != 0)
|
||||
break;
|
||||
DELAY(2000);
|
||||
}
|
||||
|
||||
if (i == 0) {
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (0);
|
||||
}
|
||||
|
||||
while((((stat = bus_space_read_1(iot, ioh, HA_STATUS))
|
||||
!= (HA_ST_READY|HA_ST_SEEK_COMPLETE))
|
||||
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR))
|
||||
&& (stat != (HA_ST_READY|HA_ST_SEEK_COMPLETE|HA_ST_ERROR|HA_ST_DRQ)))
|
||||
|| (dpt_isa_wait(ioh, iot, HA_ST_BUSY, 0))) {
|
||||
/* RAID drives still spinning up? */
|
||||
if((bus_space_read_1(iot, ioh, HA_ERROR) != 'D')
|
||||
|| (bus_space_read_1(iot, ioh, HA_ERROR + 1) != 'P')
|
||||
|| (bus_space_read_1(iot, ioh, HA_ERROR + 2) != 'T')) {
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (0);
|
||||
}
|
||||
}
|
||||
|
||||
/*
|
||||
* At this point we can be confident that we are dealing with a DPT
|
||||
* HBA. Issue the read-config command and wait for the data to
|
||||
* appear. XXX we shouldn't be doing this with PIO, but it makes it
|
||||
* a lot easier as no DMA setup is required.
|
||||
*/
|
||||
bus_space_write_1(iot, ioh, HA_COMMAND, CP_PIO_GETCFG);
|
||||
memset(&ec, 0, sizeof(ec));
|
||||
i = ((int)&((struct eata_cfg *)0)->ec_cfglen +
|
||||
sizeof(ec.ec_cfglen)) >> 1;
|
||||
p = (u_int16_t *)&ec;
|
||||
|
||||
if (dpt_isa_wait(ioh, iot, 0xFF, HA_ST_DATA_RDY)) {
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (0);
|
||||
}
|
||||
|
||||
/* Begin reading */
|
||||
while (i--)
|
||||
*p++ = le16toh(bus_space_read_2(iot, ioh, HA_DATA));
|
||||
|
||||
if ((i = ec.ec_cfglen) > (sizeof(struct eata_cfg)
|
||||
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
|
||||
- sizeof(ec.ec_cfglen)))
|
||||
i = sizeof(struct eata_cfg)
|
||||
- (int)(&(((struct eata_cfg *)0L)->ec_cfglen))
|
||||
- sizeof(ec.ec_cfglen);
|
||||
|
||||
j = i + (int)(&(((struct eata_cfg *)0L)->ec_cfglen)) +
|
||||
sizeof(ec.ec_cfglen);
|
||||
i >>= 1;
|
||||
|
||||
while (i--)
|
||||
*p++ = le16toh(bus_space_read_2(iot, ioh, HA_DATA));
|
||||
|
||||
/* Flush until we have read 512 bytes. */
|
||||
i = (512 - j + 1) >> 1;
|
||||
while (i--)
|
||||
le16toh(bus_space_read_2(iot, ioh, HA_DATA));
|
||||
|
||||
/* Puke if we don't like the returned configuration data. */
|
||||
if ((bus_space_read_1(iot, ioh, HA_STATUS) & HA_ST_ERROR) != 0 ||
|
||||
memcmp(ec.ec_eatasig, "EATA", 4) != 0 ||
|
||||
(ec.ec_feat0 & (EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED)) !=
|
||||
(EC_F0_HBA_VALID | EC_F0_DMA_SUPPORTED)) {
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (0);
|
||||
}
|
||||
|
||||
/*
|
||||
* Which DMA channel to use: if it was hardwired in the kernel
|
||||
* configuration, use that value. If the HBA told us, use that
|
||||
* value. Otherwise, puke.
|
||||
*/
|
||||
if (ia->ia_drq == -1) {
|
||||
int dmanum = ((ec.ec_feat1 & EC_F1_DMA_NUM_MASK) >>
|
||||
EC_F1_DMA_NUM_SHIFT);
|
||||
|
||||
if ((ec.ec_feat0 & EC_F0_DMA_NUM_VALID) == 0 || dmanum > 3) {
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (0);
|
||||
}
|
||||
|
||||
ia->ia_drq = "\0\7\6\5"[dmanum];
|
||||
}
|
||||
|
||||
/*
|
||||
* Which IRQ to use: if it was hardwired in the kernel configuration,
|
||||
* use that value. Otherwise, use what the HBA told us.
|
||||
*/
|
||||
if (ia->ia_irq == -1)
|
||||
ia->ia_irq = ((ec.ec_feat1 & EC_F1_IRQ_NUM_MASK) >>
|
||||
EC_F1_IRQ_NUM_SHIFT);
|
||||
|
||||
ia->ia_msize = 0;
|
||||
ia->ia_iosize = DPT_ISA_IOSIZE;
|
||||
bus_space_unmap(iot, ioh, DPT_ISA_IOSIZE);
|
||||
return (1);
|
||||
}
|
||||
|
||||
/*
|
||||
* Attach a matched board.
|
||||
*/
|
||||
static void
|
||||
dpt_isa_attach(parent, self, aux)
|
||||
struct device *parent, *self;
|
||||
void *aux;
|
||||
{
|
||||
struct isa_attach_args *ia;
|
||||
isa_chipset_tag_t ic;
|
||||
bus_space_handle_t ioh;
|
||||
bus_space_tag_t iot;
|
||||
struct dpt_softc *sc;
|
||||
struct eata_cfg *ec;
|
||||
int error;
|
||||
|
||||
ia = aux;
|
||||
sc = (struct dpt_softc *)self;
|
||||
iot = ia->ia_iot;
|
||||
ic = ia->ia_ic;
|
||||
|
||||
printf(": ");
|
||||
|
||||
if ((error = bus_space_map(iot, ia->ia_iobase, DPT_ISA_IOSIZE, 0,
|
||||
&ioh)) != 0) {
|
||||
printf("can't map i/o space, error = %d\n", error);
|
||||
return;
|
||||
}
|
||||
|
||||
sc->sc_iot = iot;
|
||||
sc->sc_ioh = ioh;
|
||||
sc->sc_dmat = ia->ia_dmat;
|
||||
|
||||
if ((error = isa_dmacascade(ic, ia->ia_drq)) != 0) {
|
||||
printf("unable to cascade DRQ, error = %d\n", error);
|
||||
return;
|
||||
}
|
||||
|
||||
/* Establish the interrupt. */
|
||||
if ((sc->sc_ih = isa_intr_establish(ic, ia->ia_irq, IST_EDGE, IPL_BIO,
|
||||
dpt_intr, sc)) == NULL) {
|
||||
printf("can't establish interrupt\n");
|
||||
return;
|
||||
}
|
||||
|
||||
if (dpt_readcfg(sc)) {
|
||||
printf("readcfg failed - see dpt(4)\n");
|
||||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Now attach to the bus-independent code. XXX We need to force
|
||||
* parameters that aren't filled in by some ISA boards. In
|
||||
* particular, due to the limited amount of memory we have to play
|
||||
* with for DMA, clamp the number of CCBs to 16. I don't know if
|
||||
* making the DMA map non-contigiuous would allow us to play with
|
||||
* more CCBs, but in any case that *could* cause a performance hit,
|
||||
* at least for ISA HBAs.
|
||||
*/
|
||||
ec = &sc->sc_ec;
|
||||
|
||||
if (be16toh(*(int16_t *)ec->ec_queuedepth) > DPT_ISA_MAXCCBS)
|
||||
*(int16_t *)ec->ec_queuedepth = htobe16(DPT_ISA_MAXCCBS);
|
||||
if (ec->ec_maxlun == 0)
|
||||
ec->ec_maxlun = 7;
|
||||
if ((ec->ec_feat3 & EC_F3_MAX_TARGET_MASK) >> EC_F3_MAX_TARGET_SHIFT
|
||||
== 0)
|
||||
ec->ec_feat3 = (ec->ec_feat3 & ~EC_F3_MAX_TARGET_MASK) |
|
||||
(7 << EC_F3_MAX_TARGET_SHIFT);
|
||||
|
||||
/* Now attach to the bus-independent code */
|
||||
dpt_init(sc, NULL);
|
||||
}
|
|
@ -1,4 +1,4 @@
|
|||
# $NetBSD: files.isa,v 1.95 2000/01/04 06:30:04 chopps Exp $
|
||||
# $NetBSD: files.isa,v 1.96 2000/02/24 18:49:06 ad Exp $
|
||||
#
|
||||
# Config file and device description for machine-independent ISA code.
|
||||
# Included by ports that need it. Requires that the SCSI files be
|
||||
|
@ -102,6 +102,11 @@ file dev/isa/esp_isa.c esp_isa
|
|||
attach bha at isa with bha_isa: isadma
|
||||
file dev/isa/bha_isa.c bha_isa
|
||||
|
||||
# DPT SmartCache/SmartRAID III/IV ISA family
|
||||
# device declaration in sys/conf/files
|
||||
attach dpt at isa with dpt_isa: isadma
|
||||
file dev/isa/dpt_isa.c dpt_isa
|
||||
|
||||
# Seagate ST0[12] ICs
|
||||
device sea: scsi, isadma
|
||||
attach sea at isa
|
||||
|
|
Loading…
Reference in New Issue