midway fixes + new stuff:
- merged multiple DRQ/DTQ ADD macros into a single DRQ and a single DTQ
macro with a uniform interface to make the code simpler and easier to read.
- en_start: only update atm_flags if EN_MBUF_OPT is enabled (which it
should be)
- for alburst: make sure we don't DMA more bytes than we need (on both
tx and rx). if the alburst is larger than we need, drop to
MIDDMA_WORD mode.
- major change: enable the use of byte and 2 byte DMA on the trasmit side.
this allows us to DMA from non-word sized/aligned mbufs directly.
[the old code would always call en_mfix which would copy (or move) the
data in order to ensure proper alignment... it turns out TCP gives
us non-word sized/aligned mbufs when it is retransmitting, so we needed
to handle this case more efficiently.] the following functions
were changed to make this work:
- en_dqneed: add an arg to let us know if we are transmitting or not.
if we are TX, then we must take into account byte DMAs when
estimating the number of DTQs we will need for a buffer
- en_start: only mfix mbufs if DMA is disabled
- en_txdma: only set launch.nodma if we have en_mfix'd the mbuf chain
also, we may need a DTQ to flush the chip's internal byte buffer
- en_txlaunch: only attempt a copy if we have the proper alignment.
add byte dma code for the front and end of the buffer.
make sure the internal dma buffer is flushed out.
- stats: keep track of how many times we have to use byte sized DMA
midwayreg:
- add byte/2byte DMA defines
midwayvar:
- add new stat counter to monitor less-than-word lengthed DMA
This commit is contained in:
chuck
parent
58400ed329
commit
1e5c811090
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: midway.c,v 1.12 1996/07/15 16:40:27 cgd Exp $ */
|
||||
/* $NetBSD: midway.c,v 1.13 1996/07/16 22:11:14 chuck Exp $ */
|
||||
/* (sync'd to midway.c 1.59) */
|
||||
|
||||
/*
|
||||
|
|
@ -285,47 +285,32 @@ u_int32_t r, v;
|
|||
#define EN_DQ_SLOT(X) ((X) >> 20)
|
||||
#define EN_DQ_LEN(X) ((X) & 0xfffff)
|
||||
|
||||
/* add an item to the DTQ (more to come) */
|
||||
#define EN_DTQADD(SC,CNT,CHAN,BCODE,ADDR) \
|
||||
EN_DTQADD_XXX(SC,CNT,CHAN,BCODE,ADDR,0)
|
||||
|
||||
/* add a final item to the DTQ and kick it */
|
||||
#define EN_DTQADDEND(SC,CNT,CHAN,BCODE,ADDR,LEN) { \
|
||||
/* add an item to the DTQ */
|
||||
#define EN_DTQADD(SC,CNT,CHAN,BCODE,ADDR,LEN,END) { \
|
||||
if (END) \
|
||||
(SC)->dtq[MID_DTQ_A2REG((SC)->dtq_us)] = EN_DQ_MK(CHAN,LEN); \
|
||||
EN_DTQADD_XXX(SC,CNT,CHAN,BCODE,ADDR,MID_DMA_END); \
|
||||
EN_WRITE((SC), MID_DMA_WRTX, MID_DTQ_A2REG((SC)->dtq_us)); \
|
||||
}
|
||||
|
||||
/* DTQ add helper macro */
|
||||
#define EN_DTQADD_XXX(SC,CNT,CHAN,BCODE,ADDR,END) { \
|
||||
EN_WRITE((SC), (SC)->dtq_us, \
|
||||
MID_MK_TXQ((CNT), (CHAN), (END), (BCODE))); \
|
||||
(SC)->dtq_us += 4; \
|
||||
EN_WRITE((SC), (SC)->dtq_us, (ADDR)); \
|
||||
EN_WRAPADD(MID_DTQOFF, MID_DTQEND, (SC)->dtq_us, 4); \
|
||||
(SC)->dtq_free--; \
|
||||
if (END) \
|
||||
EN_WRITE((SC), MID_DMA_WRTX, MID_DTQ_A2REG((SC)->dtq_us)); \
|
||||
}
|
||||
|
||||
|
||||
/* add an item to the DRQ (more to come) */
|
||||
#define EN_DRQADD(SC,CNT,VCI,BCODE,ADDR) \
|
||||
EN_DRQADD_XXX(SC,CNT,VCI,BCODE,ADDR,0)
|
||||
|
||||
/* add a final item to the DRQ and kick it */
|
||||
#define EN_DRQADDEND(SC,CNT,VCI,BCODE,ADDR,LEN,SLOT) { \
|
||||
/* DRQ add macro */
|
||||
#define EN_DRQADD(SC,CNT,VCI,BCODE,ADDR,LEN,SLOT,END) { \
|
||||
if (END) \
|
||||
(SC)->drq[MID_DRQ_A2REG((SC)->drq_us)] = EN_DQ_MK(SLOT,LEN); \
|
||||
EN_DRQADD_XXX(SC,CNT,VCI,BCODE,ADDR,MID_DMA_END); \
|
||||
EN_WRITE((SC), MID_DMA_WRRX, MID_DRQ_A2REG((SC)->drq_us)); \
|
||||
}
|
||||
|
||||
/* DRQ add helper macro */
|
||||
#define EN_DRQADD_XXX(SC,CNT,VCI,BCODE,ADDR,END) { \
|
||||
EN_WRITE((SC), (SC)->drq_us, \
|
||||
MID_MK_RXQ((CNT), (VCI), (END), (BCODE))); \
|
||||
(SC)->drq_us += 4; \
|
||||
EN_WRITE((SC), (SC)->drq_us, (ADDR)); \
|
||||
EN_WRAPADD(MID_DRQOFF, MID_DRQEND, (SC)->drq_us, 4); \
|
||||
(SC)->drq_free--; \
|
||||
if (END) \
|
||||
EN_WRITE((SC), MID_DMA_WRRX, MID_DRQ_A2REG((SC)->drq_us)); \
|
||||
}
|
||||
|
||||
/*
|
||||
|
|
@ -340,7 +325,7 @@ int en_dumpmem __P((int,int,int));
|
|||
STATIC void en_dmaprobe __P((struct en_softc *));
|
||||
STATIC int en_dmaprobe_doit __P((struct en_softc *, u_int8_t *,
|
||||
u_int8_t *, int));
|
||||
STATIC int en_dqneed __P((struct en_softc *, caddr_t, u_int));
|
||||
STATIC int en_dqneed __P((struct en_softc *, caddr_t, u_int, u_int));
|
||||
STATIC void en_init __P((struct en_softc *));
|
||||
STATIC int en_ioctl __P((struct ifnet *, EN_IOCTL_CMDT, caddr_t));
|
||||
STATIC int en_k2sz __P((int));
|
||||
|
|
@ -442,32 +427,51 @@ int sz;
|
|||
* en_dqneed: calculate number of DTQ/DRQ's needed for a buffer
|
||||
*/
|
||||
|
||||
STATIC INLINE int en_dqneed(sc, data, len)
|
||||
STATIC INLINE int en_dqneed(sc, data, len, tx)
|
||||
|
||||
struct en_softc *sc;
|
||||
caddr_t data;
|
||||
u_int len;
|
||||
u_int len, tx;
|
||||
|
||||
{
|
||||
int result = 0, needalign;
|
||||
int result = 0, needalign, sz;
|
||||
|
||||
if (len < EN_MINDMA) {
|
||||
if (!tx) /* XXX: conservative */
|
||||
return(1); /* will copy/DMA_JK */
|
||||
}
|
||||
|
||||
if (sc->alburst) {
|
||||
if (tx) { /* byte burst? */
|
||||
needalign = (((unsigned long) data) % sizeof(u_int32_t));
|
||||
if (needalign) {
|
||||
result++;
|
||||
sz = min(len, sizeof(u_int32_t) - needalign);
|
||||
len -= sz;
|
||||
data += sz;
|
||||
}
|
||||
}
|
||||
|
||||
if (sc->alburst && len) {
|
||||
needalign = (((unsigned long) data) & sc->bestburstmask);
|
||||
if (needalign) {
|
||||
result++; /* alburst */
|
||||
len = len - (sc->bestburstlen - needalign);
|
||||
sz = min(len, sc->bestburstlen - needalign);
|
||||
len -= sz;
|
||||
}
|
||||
}
|
||||
|
||||
if (len)
|
||||
if (len >= sc->bestburstlen) {
|
||||
sz = len / sc->bestburstlen;
|
||||
sz = sz * sc->bestburstlen;
|
||||
len -= sz;
|
||||
result++; /* best shot */
|
||||
}
|
||||
|
||||
if (len > sc->bestburstlen && (len & sc->bestburstmask) != 0)
|
||||
if (len) {
|
||||
result++; /* clean up */
|
||||
if (tx && (len % sizeof(u_int32_t)) != 0)
|
||||
result++; /* byte cleanup */
|
||||
}
|
||||
|
||||
return(result);
|
||||
}
|
||||
|
|
@ -518,7 +522,7 @@ u_int totlen, *drqneed;
|
|||
*mp = m;
|
||||
mp = &m->m_next;
|
||||
|
||||
*drqneed += en_dqneed(sc, m->m_data, m->m_len);
|
||||
*drqneed += en_dqneed(sc, m->m_data, m->m_len, 0);
|
||||
|
||||
}
|
||||
return(top);
|
||||
|
|
@ -669,6 +673,7 @@ done_probe:
|
|||
sc->txoutspace = sc->txdtqout = sc->launch = sc->lheader = sc->ltail = 0;
|
||||
sc->hwpull = sc->swadd = sc->rxqnotus = sc->rxqus = sc->rxoutboth = 0;
|
||||
sc->rxdrqout = sc->ttrash = sc->rxmbufout = sc->mfixfail = 0;
|
||||
sc->headbyte = sc->tailbyte = sc->tailflush = 0;
|
||||
#endif
|
||||
sc->need_drqs = sc->need_dtqs = 0;
|
||||
|
||||
|
|
@ -1301,8 +1306,10 @@ struct ifnet *ifp;
|
|||
|
||||
/*
|
||||
* calculate size of packet (in bytes)
|
||||
* we also eliminate all stupid (non-word) alignments here using
|
||||
* en_mfix(). a well behaved protocol will never need en_mfix()!
|
||||
* also, if we are not doing transmit DMA we eliminate all stupid
|
||||
* (non-word) alignments here using en_mfix(). calls to en_mfix()
|
||||
* seem to be due to tcp retransmits for the most part.
|
||||
*
|
||||
* after this loop mlen total length of mbuf chain (including atm_ph),
|
||||
* and lastm is a pointer to the last mbuf on the chain.
|
||||
*/
|
||||
|
|
@ -1311,6 +1318,7 @@ struct ifnet *ifp;
|
|||
mlen = 0;
|
||||
prev = NULL;
|
||||
while (1) {
|
||||
if (EN_NOTXDMA || !en_dma) { /* no DMA? */
|
||||
if ( (mtod(lastm, unsigned long) % sizeof(u_int32_t)) != 0 ||
|
||||
((lastm->m_len % sizeof(u_int32_t)) != 0 && lastm->m_next)) {
|
||||
first = (lastm == m);
|
||||
|
|
@ -1322,10 +1330,11 @@ struct ifnet *ifp;
|
|||
if (first)
|
||||
m = lastm; /* update */
|
||||
}
|
||||
prev = lastm;
|
||||
}
|
||||
mlen += lastm->m_len;
|
||||
if (lastm->m_next == NULL)
|
||||
break;
|
||||
prev = lastm;
|
||||
lastm = lastm->m_next;
|
||||
}
|
||||
|
||||
|
|
@ -1415,8 +1424,8 @@ struct ifnet *ifp;
|
|||
}
|
||||
atm_flags |= EN_OBTRL;
|
||||
}
|
||||
#endif /* EN_MBUF_OPT */
|
||||
ATM_PH_FLAGS(ap) = atm_flags; /* update EN_OBHDR/EN_OBTRL bits */
|
||||
#endif /* EN_MBUF_OPT */
|
||||
|
||||
/*
|
||||
* choose channel with smallest # of bytes waiting for DMA
|
||||
|
|
@ -1560,8 +1569,15 @@ int chan;
|
|||
printf("%s: tx%d: starting...\n", sc->sc_dev.dv_xname, chan);
|
||||
#endif
|
||||
|
||||
/*
|
||||
* note: now that txlaunch handles non-word aligned/sized requests
|
||||
* the only time you can safely set launch.nodma is if you've en_mfix()'d
|
||||
* the mbuf chain. this happens only if EN_NOTXDMA || !en_dma.
|
||||
*/
|
||||
|
||||
launch.nodma = (EN_NOTXDMA || !en_dma);
|
||||
|
||||
again:
|
||||
launch.nodma = 0;
|
||||
|
||||
/*
|
||||
* get an mbuf waiting for DMA
|
||||
|
|
@ -1617,9 +1633,12 @@ again:
|
|||
if (len == 0)
|
||||
continue; /* atm_pseudohdr alone in first mbuf */
|
||||
|
||||
dtqneed += en_dqneed(sc, (caddr_t) cp, len);
|
||||
dtqneed += en_dqneed(sc, (caddr_t) cp, len, 1);
|
||||
}
|
||||
|
||||
if ((launch.need % sizeof(u_int32_t)) != 0)
|
||||
dtqneed++; /* need DTQ to FLUSH internal buffer */
|
||||
|
||||
if ((launch.atm_flags & EN_OBTRL) == 0) {
|
||||
if (launch.aal == MID_TBD_AAL5) {
|
||||
datalen = launch.need - MID_TBD_SIZE;
|
||||
|
|
@ -1654,21 +1673,11 @@ again:
|
|||
}
|
||||
|
||||
/*
|
||||
* ensure we have enough dtqs to go, if not, wait for more
|
||||
* note that we only need 1 dtq if we are copying everything.
|
||||
*
|
||||
* XXX: we may want to modify the above to set launch.nodma if launch.mlen is
|
||||
* less than a certain size (and avoid the DMA setup costs for small data)
|
||||
* ensure we have enough dtqs to go, if not, wait for more.
|
||||
*/
|
||||
|
||||
#if 0
|
||||
if (launch.mlen < SomeValueToBeDetermined)
|
||||
launch.nodma = 1;
|
||||
#endif
|
||||
|
||||
if (EN_NOTXDMA || !en_dma || launch.nodma) {
|
||||
if (launch.nodma) {
|
||||
dtqneed = 1;
|
||||
launch.nodma = 1;
|
||||
}
|
||||
if (dtqneed > sc->dtq_free) {
|
||||
sc->need_dtqs = 1;
|
||||
|
|
@ -1736,8 +1745,7 @@ dequeue_drop:
|
|||
|
||||
|
||||
/*
|
||||
* en_txlaunch: launch an mbuf into the dma pool! note that we have
|
||||
* en_mfix()ed any strange mbufs so we can count on u_int32_t alignment.
|
||||
* en_txlaunch: launch an mbuf into the dma pool!
|
||||
*/
|
||||
|
||||
STATIC void en_txlaunch(sc, chan, l)
|
||||
|
|
@ -1752,7 +1760,7 @@ struct en_launch *l;
|
|||
start = sc->txslot[chan].start,
|
||||
stop = sc->txslot[chan].stop,
|
||||
dma, *data, *datastop, count, bcode;
|
||||
int pad, addtail, need, last, len, needalign, cnt;
|
||||
int pad, addtail, need, len, needalign, cnt, end, mx;
|
||||
|
||||
|
||||
/*
|
||||
|
|
@ -1765,14 +1773,16 @@ struct en_launch *l;
|
|||
* cnt = # of bytes to transfer in this DTQ
|
||||
* bcode/count = DMA burst code, and chip's version of cnt
|
||||
*
|
||||
* note that for odd length mbufs we have already padded them out with
|
||||
* zeros, so "len" and "need" are rounded up to a word boundary. an
|
||||
* odd length mbuf can only happen on the last mbuf of a chain [because we've
|
||||
* done en_mfix on the chain]. for aal5, the true length is already in
|
||||
* l->pdu.
|
||||
* a single buffer can require up to 5 DTQs depending on its size
|
||||
* and alignment requirements. the 5 possible requests are:
|
||||
* [1] 1, 2, or 3 byte DMA to align src data pointer to word boundary
|
||||
* [2] alburst DMA to align src data pointer to bestburstlen
|
||||
* [3] 1 or more bestburstlen DMAs
|
||||
* [4] clean up burst (to last word boundary)
|
||||
* [5] 1, 2, or 3 byte final clean up DMA
|
||||
*/
|
||||
|
||||
need = roundup(l->need, sizeof(u_int32_t));
|
||||
need = l->need;
|
||||
dma = cur;
|
||||
addtail = (l->atm_flags & EN_OBTRL) == 0; /* add a tail? */
|
||||
|
||||
|
|
@ -1811,20 +1821,19 @@ struct en_launch *l;
|
|||
* now do the mbufs...
|
||||
*/
|
||||
|
||||
last = 0;
|
||||
for (tmp = l->t ; tmp != NULL ; tmp = tmp->m_next) {
|
||||
|
||||
/* get pointer to data and length */
|
||||
data = mtod(tmp, u_int32_t *);
|
||||
len = roundup(tmp->m_len, sizeof(u_int32_t));
|
||||
last = (tmp->m_next == NULL);
|
||||
len = tmp->m_len;
|
||||
if (tmp == l->t) {
|
||||
data += sizeof(struct atm_pseudohdr)/sizeof(u_int32_t);
|
||||
len -= sizeof(struct atm_pseudohdr);
|
||||
}
|
||||
|
||||
/* now, determine if we should copy it */
|
||||
if (l->nodma || len < EN_MINDMA) {
|
||||
if (l->nodma || (len < EN_MINDMA &&
|
||||
(len % 4) == 0 && ((unsigned long) data % 4) == 0 && (cur % 4) == 0)) {
|
||||
datastop = data + (len / sizeof(u_int32_t));
|
||||
/* copy loop: preserve byte order!!! use WRITEDAT */
|
||||
while (data != datastop) {
|
||||
|
|
@ -1842,20 +1851,54 @@ struct en_launch *l;
|
|||
|
||||
/* going to do DMA, first make sure the dtq is in sync. */
|
||||
if (dma != cur) {
|
||||
EN_DTQADD(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0);
|
||||
EN_DTQADD(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0, 0, 0);
|
||||
#ifdef EN_DEBUG
|
||||
printf("%s: tx%d: dtq_sync: advance pointer to %d\n",
|
||||
sc->sc_dev.dv_xname, chan, cur);
|
||||
#endif
|
||||
}
|
||||
|
||||
/* do we need to do a DMA op to align to word boundary? */
|
||||
needalign = (unsigned long) data % sizeof(u_int32_t);
|
||||
if (needalign) {
|
||||
EN_COUNT(sc->headbyte);
|
||||
cnt = min(len, sizeof(u_int32_t) - needalign);
|
||||
if (cnt == 2) {
|
||||
count = 1;
|
||||
bcode = MIDDMA_2BYTE;
|
||||
} else {
|
||||
count = cnt;
|
||||
bcode = MIDDMA_BYTE;
|
||||
}
|
||||
need -= cnt;
|
||||
EN_WRAPADD(start, stop, cur, cnt);
|
||||
#ifdef EN_DEBUG
|
||||
printf("%s: tx%d: small al_dma %d bytes (%d left, cur now 0x%x)\n",
|
||||
sc->sc_dev.dv_xname, chan, cnt, need, cur);
|
||||
#endif
|
||||
len -= cnt;
|
||||
end = (need == 0) ? MID_DMA_END : 0;
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *) ((u_char *)data + cnt);
|
||||
}
|
||||
|
||||
/* do we need to do a DMA op to align? */
|
||||
if (sc->alburst &&
|
||||
(needalign = (((unsigned long) data) & sc->bestburstmask)) != 0) {
|
||||
(needalign = (((unsigned long) data) & sc->bestburstmask)) != 0
|
||||
&& len >= sizeof(u_int32_t)) {
|
||||
cnt = sc->bestburstlen - needalign;
|
||||
mx = len & ~(sizeof(u_int32_t)-1); /* don't go past end */
|
||||
if (cnt > mx) {
|
||||
cnt = mx;
|
||||
count = cnt / sizeof(u_int32_t);
|
||||
bcode = MIDDMA_WORD;
|
||||
} else {
|
||||
count = cnt / sizeof(u_int32_t);
|
||||
bcode = en_dmaplan[count].bcode;
|
||||
count = cnt >> en_dmaplan[count].divshift;
|
||||
}
|
||||
need -= cnt;
|
||||
EN_WRAPADD(start, stop, cur, cnt);
|
||||
#ifdef EN_DEBUG
|
||||
|
|
@ -1863,11 +1906,10 @@ struct en_launch *l;
|
|||
sc->sc_dev.dv_xname, chan, cnt, need, cur);
|
||||
#endif
|
||||
len -= cnt;
|
||||
if (len == 0 && last && addtail == 0) {
|
||||
EN_DTQADDEND(sc, count, chan, bcode, vtophys(data), l->mlen);
|
||||
goto done; /* finished ! */
|
||||
}
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data));
|
||||
end = (need == 0) ? MID_DMA_END : 0;
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *) ((u_char *)data + cnt);
|
||||
}
|
||||
|
||||
|
|
@ -1883,30 +1925,53 @@ struct en_launch *l;
|
|||
sc->sc_dev.dv_xname, chan, cnt, need, cur);
|
||||
#endif
|
||||
len -= cnt;
|
||||
if (len == 0 && last && addtail == 0) {
|
||||
EN_DTQADDEND(sc, count, chan, bcode, vtophys(data), l->mlen);
|
||||
goto done; /* finished ! */
|
||||
}
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data));
|
||||
end = (need == 0) ? MID_DMA_END : 0;
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *) ((u_char *)data + cnt);
|
||||
}
|
||||
|
||||
/* do we need to do a cleanup burst? */
|
||||
if (len) {
|
||||
count = len / sizeof(u_int32_t);
|
||||
cnt = len & ~(sizeof(u_int32_t)-1);
|
||||
if (cnt) {
|
||||
count = cnt / sizeof(u_int32_t);
|
||||
bcode = en_dmaplan[count].bcode;
|
||||
count = len >> en_dmaplan[count].divshift;
|
||||
count = cnt >> en_dmaplan[count].divshift;
|
||||
need -= cnt;
|
||||
EN_WRAPADD(start, stop, cur, cnt);
|
||||
#ifdef EN_DEBUG
|
||||
printf("%s: tx%d: cleanup_dma %d bytes (%d left, cur now 0x%x)\n",
|
||||
sc->sc_dev.dv_xname, chan, cnt, need, cur);
|
||||
#endif
|
||||
len -= cnt;
|
||||
end = (need == 0) ? MID_DMA_END : 0;
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *) ((u_char *)data + cnt);
|
||||
}
|
||||
|
||||
/* any word fragments left? */
|
||||
if (len) {
|
||||
EN_COUNT(sc->tailbyte);
|
||||
if (len == 2) {
|
||||
count = 1;
|
||||
bcode = MIDDMA_2BYTE; /* use 2byte mode */
|
||||
} else {
|
||||
count = len;
|
||||
bcode = MIDDMA_BYTE; /* use 1 byte mode */
|
||||
}
|
||||
need -= len;
|
||||
EN_WRAPADD(start, stop, cur, len);
|
||||
#ifdef EN_DEBUG
|
||||
printf("%s: tx%d: cleanup_dma %d bytes (%d left, cur now 0x%x)\n",
|
||||
printf("%s: tx%d: byte cleanup_dma %d bytes (%d left, cur now 0x%x)\n",
|
||||
sc->sc_dev.dv_xname, chan, len, need, cur);
|
||||
#endif
|
||||
if (last && addtail == 0) {
|
||||
EN_DTQADDEND(sc, count, chan, bcode, vtophys(data), l->mlen);
|
||||
goto done; /* finished ! */
|
||||
}
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data));
|
||||
end = (need == 0) ? MID_DMA_END : 0;
|
||||
EN_DTQADD(sc, count, chan, bcode, vtophys(data), l->mlen, end);
|
||||
if (end)
|
||||
goto done;
|
||||
}
|
||||
|
||||
dma = cur; /* update dma pointer */
|
||||
|
|
@ -1915,12 +1980,32 @@ struct en_launch *l;
|
|||
|
||||
/*
|
||||
* all mbuf data has been copied out to the obmem (or set up to be DMAd).
|
||||
* if the trailer or padding needs to be put in, do it now. note that
|
||||
* we round down the padding size since we may have already padded some.
|
||||
* if the trailer or padding needs to be put in, do it now.
|
||||
*
|
||||
* NOTE: experimental results reveal the following fact:
|
||||
* if you DMA "X" bytes to the card, where X is not a multiple of 4,
|
||||
* then the card will internally buffer the last (X % 4) bytes (in
|
||||
* hopes of getting (4 - (X % 4)) more bytes to make a complete word).
|
||||
* it is imporant to make sure we don't leave any important data in
|
||||
* this internal buffer because it is discarded on the last (end) DTQ.
|
||||
* one way to do this is to DMA in (4 - (X % 4)) more bytes to flush
|
||||
* the darn thing out.
|
||||
*/
|
||||
|
||||
if (addtail) {
|
||||
|
||||
pad = need % sizeof(u_int32_t);
|
||||
if (pad) {
|
||||
/*
|
||||
* FLUSH internal data buffer. pad out with random data from the front
|
||||
* of the mbuf chain...
|
||||
*/
|
||||
EN_COUNT(sc->tailflush);
|
||||
EN_WRAPADD(start, stop, cur, pad);
|
||||
EN_DTQADD(sc, pad, chan, MIDDMA_BYTE, vtophys(l->t->m_data), 0, 0);
|
||||
need -= pad;
|
||||
}
|
||||
|
||||
/* copy data */
|
||||
pad = need / sizeof(u_int32_t); /* round *down* */
|
||||
if (l->aal == MID_TBD_AAL5)
|
||||
|
|
@ -1941,7 +2026,8 @@ struct en_launch *l;
|
|||
|
||||
if (addtail || dma != cur) {
|
||||
/* write final descritor */
|
||||
EN_DTQADDEND(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0, l->mlen);
|
||||
EN_DTQADD(sc, WORD_IDX(start,cur), chan, MIDDMA_JK, 0,
|
||||
l->mlen, MID_DMA_END);
|
||||
/* dma = cur; */ /* not necessary since we are done */
|
||||
}
|
||||
|
||||
|
|
@ -2241,7 +2327,7 @@ struct en_softc *sc;
|
|||
struct mbuf *m, *tmp;
|
||||
u_int32_t cur, dstart, rbd, pdu, *sav, dma, bcode, count, *data, *datastop;
|
||||
u_int32_t start, stop, cnt, needalign;
|
||||
int slot, raw, aal5, llc, vci, fill, mlen, tlen, drqneed, need, needfill;
|
||||
int slot, raw, aal5, llc, vci, fill, mlen, tlen, drqneed, need, needfill, end;
|
||||
|
||||
next_vci:
|
||||
if (sc->swsl_size == 0) {
|
||||
|
|
@ -2475,7 +2561,7 @@ defer: /* defer processing */
|
|||
|
||||
/* DMA data (check to see if we need to sync DRQ first) */
|
||||
if (dma != cur) {
|
||||
EN_DRQADD(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0);
|
||||
EN_DRQADD(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0, 0, 0, 0);
|
||||
#ifdef EN_DEBUG
|
||||
printf("%s: rx%d: vci%d: drq_sync: advance pointer to %d\n",
|
||||
sc->sc_dev.dv_xname, slot, vci, cur);
|
||||
|
|
@ -2486,9 +2572,15 @@ defer: /* defer processing */
|
|||
if (sc->alburst &&
|
||||
(needalign = (((unsigned long) data) & sc->bestburstmask)) != 0) {
|
||||
cnt = sc->bestburstlen - needalign;
|
||||
if (cnt > tlen) {
|
||||
cnt = tlen;
|
||||
count = cnt / sizeof(u_int32_t);
|
||||
bcode = MIDDMA_WORD;
|
||||
} else {
|
||||
count = cnt / sizeof(u_int32_t);
|
||||
bcode = en_dmaplan[count].bcode;
|
||||
count = cnt >> en_dmaplan[count].divshift;
|
||||
}
|
||||
need -= cnt;
|
||||
EN_WRAPADD(start, stop, cur, cnt);
|
||||
#ifdef EN_DEBUG
|
||||
|
|
@ -2496,11 +2588,10 @@ defer: /* defer processing */
|
|||
sc->sc_dev.dv_xname, slot, vci, cnt, need);
|
||||
#endif
|
||||
tlen -= cnt;
|
||||
if (need == 0 && !fill) {
|
||||
EN_DRQADDEND(sc, count, vci, bcode, vtophys(data), mlen, slot);
|
||||
goto done; /* finished! */
|
||||
}
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data));
|
||||
end = (need == 0 && !fill) ? MID_DMA_END : 0;
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *)((u_char *) data + cnt);
|
||||
}
|
||||
|
||||
|
|
@ -2516,11 +2607,10 @@ defer: /* defer processing */
|
|||
sc->sc_dev.dv_xname, slot, vci, cnt, need);
|
||||
#endif
|
||||
tlen -= cnt;
|
||||
if (need == 0 && !fill) {
|
||||
EN_DRQADDEND(sc, count, vci, bcode, vtophys(data), mlen, slot);
|
||||
goto done; /* finished! */
|
||||
}
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data));
|
||||
end = (need == 0 && !fill) ? MID_DMA_END : 0;
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
|
||||
if (end)
|
||||
goto done;
|
||||
data = (u_int32_t *)((u_char *) data + cnt);
|
||||
}
|
||||
|
||||
|
|
@ -2535,11 +2625,10 @@ defer: /* defer processing */
|
|||
printf("%s: rx%d: vci%d: cleanup_dma %d bytes (%d left)\n",
|
||||
sc->sc_dev.dv_xname, slot, vci, tlen, need);
|
||||
#endif
|
||||
if (need == 0 && !fill) {
|
||||
EN_DRQADDEND(sc, count, vci, bcode, vtophys(data), mlen, slot);
|
||||
goto done; /* finished! */
|
||||
}
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data));
|
||||
end = (need == 0 && !fill) ? MID_DMA_END : 0;
|
||||
EN_DRQADD(sc, count, vci, bcode, vtophys(data), mlen, slot, end);
|
||||
if (end)
|
||||
goto done;
|
||||
}
|
||||
|
||||
dma = cur; /* update dma pointer */
|
||||
|
|
@ -2557,7 +2646,8 @@ defer: /* defer processing */
|
|||
sc->sc_dev.dv_xname, slot, vci, dma, cur);
|
||||
#endif
|
||||
EN_WRAPADD(start, stop, cur, fill);
|
||||
EN_DRQADDEND(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0, mlen, slot);
|
||||
EN_DRQADD(sc, WORD_IDX(start,cur), vci, MIDDMA_JK, 0, mlen,
|
||||
slot, MID_DMA_END);
|
||||
/* dma = cur; */ /* not necessary since we are done */
|
||||
}
|
||||
|
||||
|
|
@ -2634,8 +2724,8 @@ int unit, level;
|
|||
|
||||
if (level & END_STATS) {
|
||||
printf(" en_stats:\n");
|
||||
printf(" %d mbufs fixed by mfix (%d failures)\n",
|
||||
sc->mfix, sc->mfixfail);
|
||||
printf(" %d mfix (%d failed); %d/%d head/tail byte DMAs, %d flushes\n",
|
||||
sc->mfix, sc->mfixfail, sc->headbyte, sc->tailbyte, sc->tailflush);
|
||||
printf(" %d rx dma overflow interrupts\n", sc->dmaovr);
|
||||
printf(" %d times we ran out of TX space and stalled\n",
|
||||
sc->txoutspace);
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: midwayreg.h,v 1.3 1996/07/03 17:22:00 chuck Exp $ */
|
||||
/* $NetBSD: midwayreg.h,v 1.4 1996/07/16 22:11:05 chuck Exp $ */
|
||||
|
||||
/*
|
||||
* m i d w a y r e g . h
|
||||
|
|
@ -228,6 +228,8 @@ typedef caddr_t bus_mem_addr_t;
|
|||
*/
|
||||
|
||||
#define MIDDMA_JK 0x3 /* just kidding */
|
||||
#define MIDDMA_BYTE 0x1 /* byte */
|
||||
#define MIDDMA_2BYTE 0x2 /* 2 bytes */
|
||||
#define MIDDMA_WORD 0x0 /* word */
|
||||
#define MIDDMA_2WORD 0x7 /* 2 words */
|
||||
#define MIDDMA_4WORD 0x4 /* 4 words */
|
||||
|
|
|
|||
|
|
@ -1,4 +1,4 @@
|
|||
/* $NetBSD: midwayvar.h,v 1.6 1996/07/11 22:48:13 chuck Exp $ */
|
||||
/* $NetBSD: midwayvar.h,v 1.7 1996/07/16 22:11:11 chuck Exp $ */
|
||||
|
||||
/*
|
||||
*
|
||||
|
|
@ -164,6 +164,9 @@ struct en_softc {
|
|||
u_int32_t ttrash; /* # of RBD's with T bit set */
|
||||
u_int32_t mfix; /* # of times we had to call mfix */
|
||||
u_int32_t mfixfail; /* # of times mfix failed */
|
||||
u_int32_t headbyte; /* # of times we used BYTE DMA at front */
|
||||
u_int32_t tailbyte; /* # of times we used BYTE DMA at end */
|
||||
u_int32_t tailflush; /* # of times we had to FLUSH out DMA bytes */
|
||||
u_int32_t txmbovr; /* # of times we dropped due to mbsize */
|
||||
u_int32_t dmaovr; /* tx dma overflow count */
|
||||
u_int32_t txoutspace; /* out of space in xmit buffer */
|
||||
|
|
|
|||
Loading…
Reference in New Issue