Minor spelling fixes.

choise -> choice
  continous -> continuous
  dalog -> dialog
  labelled -> labeled
  limitiations -> limitations
  neccessary -> necessary
  sceme -> scheme
  standarize -> standardize

distrib/notes/atari/install

@@ -1,4 +1,4 @@
-.\"	$NetBSD: install,v 1.16 2000/10/29 14:08:06 lukem Exp $
+.\"	$NetBSD: install,v 1.17 2001/07/24 17:30:55 nra Exp $
 .\"
 .\" Copyright (c) 1999, 2000 The NetBSD Foundation, Inc.
 .\" All rights reserved.
@@ -87,7 +87,7 @@ for each
 track loaded. After loading 80 tracks, it will ask you
 to insert the next floppy. At this time, insert the
 .Nx
-install floppy 2 and press any key. The kernel continous
+install floppy 2 and press any key. The kernel continuous
 loading another 40 tracks before it continues to boot.
 .(Note
 If you are using 1.44 MB floppies, you should select
@@ -189,7 +189,7 @@ change anything
 unless you are absolutely sure what you are doing!
 If you are labeling an empty SCSI disk, you can make life easy for
 yourself by selecting
-.Dq standarize geometry .
+.Dq standardize geometry .
 This allows you to
 select a
 .Dq sectors per track
@@ -246,7 +246,7 @@ correctly, it starts creating them for you.
 Configure your network
 Currently none of the kernels supplied in the distribution has
 network support builtin. If you compiled your own kernel, network
-configuration mostly works. [ Due to space limitiations, some
+configuration mostly works. [ Due to space limitations, some
 of the network commands are not present on the install floppy ]
 .It
 Edit the fstab - again....
@@ -305,7 +305,7 @@ for 1.44 MB disks, or one of the hard disk partitions.
 .It
 Installing the bootstrap
 Finally, the installer ask you if you want to install the bootblock
-code on your root disk. This is a matter of personal choise and can
+code on your root disk. This is a matter of personal choice and can
 also be done from a running
 .Nx
 system. See the
@@ -342,7 +342,7 @@ from
 .Pa /netbsd
 to
 .Pa /kernels/netbsd .
-This sceme is particulary handy when you want to make your
+This scheme is particularly handy when you want to make your
 own kernel. When compilation is finished, you just copy
 your kernel to
 .Pa /kernels/netbsd

distrib/notes/atari/prep

@@ -1,4 +1,4 @@
-.\"	$NetBSD: prep,v 1.8 2000/10/29 14:08:06 lukem Exp $
+.\"	$NetBSD: prep,v 1.9 2001/07/24 17:30:56 nra Exp $
 .
 Note you will be modifying your HD's if you mess something up here you
 could lose everything on all the drives that you work with.  It is
@@ -42,9 +42,9 @@ As you might know; every hard disk has a
 .Sq root sector
 that contains information about the size of the hard disk and the partitions
 on the hard disk.
-The root sector can only contain the neccessary data for four
+The root sector can only contain the necessary data for four
 partitions. Nobody thought that this limitation would cause any problems.
-After all, 640 KByte should be enough.  As hard disk grew, it was neccessary
+After all, 640 KByte should be enough.  As hard disk grew, it was necessary
 to define more than four partitions. In order to be more or less compatible
 with the old format, a new type of partition entry was defined: XGM partions.
 .Pp
@@ -69,7 +69,7 @@ If you are creating your partitions with HDX, you'll have to be very careful
 to fulfill this rule. HDX has some very strange ideas when it comes to
 extended partitions. Fortunately, you can edit this stuff: The
 .Dq "Edit partition scheme of the unit"
-dialog box has a button labelled
+dialog box has a button labeled
 .Dq "expert" .
 This button is inactive unless you have defined more than four partitions.
 Click on it
@@ -93,7 +93,7 @@ have defined 7 partitions, partitions #2 to #5 will be extended partitions,
 while partitions #1, #6 and #7 will be primary partitions.
 .Pp
 You can move the extended partition range by clicking on one of the buttons
-on the right side of the dalog box. Try to find one where your first
+on the right side of the dialog box. Try to find one where your first
 .Nx
 partition is a primary partition. Golden rules:
 .(bullet