Add support Marvell Sheevaplug.
Add some NAS on Marvell SoC.
This commit is contained in:
kiyohara
parent
7ed1ebb1b1
commit
12f099863c
|
|
@ -0,0 +1,33 @@
|
|||
# $NetBSD: DNS323,v 1.1 2010/10/02 06:18:39 kiyohara Exp $
|
||||
#
|
||||
# DNS323 -- D-Link. DNS-323 platform kernel
|
||||
#
|
||||
|
||||
include "arch/evbarm/conf/MARVELL_NAS"
|
||||
|
||||
# Board Type
|
||||
makeoptions BOARDTYPE="dns323"
|
||||
options EVBARM_BOARDTYPE=dns323
|
||||
|
||||
makeoptions CPUFLAGS="-mcpu=xscale" # Xscale instruction set support
|
||||
no options CPU_SHEEVA
|
||||
|
||||
# Development and Debugging options
|
||||
|
||||
#options PERFCTRS # performance counters
|
||||
options DIAGNOSTIC # internally consistency checks
|
||||
options DEBUG
|
||||
#options PMAP_DEBUG # Enable pmap_debug_level code
|
||||
#options VERBOSE_INIT_ARM # verbose bootstraping messages
|
||||
options DDB # in-kernel debugger
|
||||
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
||||
#options KGDB
|
||||
#options DEBUG_KGDB
|
||||
makeoptions DEBUG="-g -O2" # compile full symbol table
|
||||
options SYMTAB_SPACE=500000
|
||||
#options AUDIO_DEBUG=2
|
||||
|
||||
|
||||
g760a* at iic? addr 0x3e # G760a fan speed controller
|
||||
lmtemp* at iic? addr 0x48 # LM75 temperature sensor
|
||||
#m41t80rtc* at iic? addr 0x68 # ST M41T80 Real-Time Clock
|
||||
|
|
@ -0,0 +1,40 @@
|
|||
# $NetBSD: KUROBOX_PRO,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
#
|
||||
# KUROBOX_PRO -- KUROUTOSHIKOU. KURO-BOX/PRO platform kernel
|
||||
#
|
||||
|
||||
include "arch/evbarm/conf/MARVELL_NAS"
|
||||
|
||||
# Board Type
|
||||
makeoptions BOARDTYPE="kurobox_pro"
|
||||
options EVBARM_BOARDTYPE=kurobox_pro
|
||||
|
||||
makeoptions CPUFLAGS="-mcpu=xscale" # Xscale instruction set support
|
||||
no options CPU_SHEEVA
|
||||
no options KIRKWOOD
|
||||
|
||||
# Development and Debugging options
|
||||
|
||||
#options PERFCTRS # performance counters
|
||||
options DIAGNOSTIC # internally consistency checks
|
||||
options DEBUG
|
||||
#options PMAP_DEBUG # Enable pmap_debug_level code
|
||||
#options VERBOSE_INIT_ARM # verbose bootstraping messages
|
||||
options DDB # in-kernel debugger
|
||||
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
||||
#options KGDB
|
||||
#options DEBUG_KGDB
|
||||
makeoptions DEBUG="-g -O2" # compile full symbol table
|
||||
options SYMTAB_SPACE=500000
|
||||
#options AUDIO_DEBUG=2
|
||||
|
||||
|
||||
# On-chip PCI Interface doesn't use.
|
||||
no gtpci* at mvsoc?
|
||||
no pci* at gtpci?
|
||||
|
||||
rs5c372rtc* at iic? addr 0x32 # RICOH RS5C372 RTC
|
||||
|
||||
# PCI network interfaces
|
||||
#mskc* at pci? dev ? function ? # Marvell Yukon 2 Gigabit Ethernet
|
||||
#msk* at mskc?
|
||||
|
|
@ -0,0 +1,332 @@
|
|||
# $NetBSD: MARVELL_NAS,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
#
|
||||
# This configuration supports for generically Marvell NAS.
|
||||
|
||||
include "arch/evbarm/conf/std.marvell"
|
||||
|
||||
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
||||
|
||||
# estimated number of users
|
||||
|
||||
maxusers 32
|
||||
|
||||
# CPU options
|
||||
options CPU_ARM9E
|
||||
#makeoptions CPUFLAGS="-mcpu=xscale" # Xscale instruction set support
|
||||
options CPU_SHEEVA
|
||||
#makeoptions CPUFLAGS="-mcpu=arm9e"
|
||||
|
||||
# Marvell SoC options
|
||||
options ORION
|
||||
options KIRKWOOD
|
||||
#options MV78XX0
|
||||
|
||||
# Standard system options
|
||||
|
||||
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
||||
#options NTP # NTP phase/frequency locked loop
|
||||
|
||||
# File systems
|
||||
|
||||
file-system FFS # UFS
|
||||
file-system EXT2FS # second extended file system (linux)
|
||||
file-system LFS # log-structured file system
|
||||
file-system MFS # memory file system
|
||||
file-system NFS # Network File System client
|
||||
file-system NTFS # Windows/NT file system (experimental)
|
||||
file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
file-system MSDOSFS # MS-DOS file system
|
||||
file-system FDESC # /dev/fd
|
||||
file-system KERNFS # /kern
|
||||
file-system NULLFS # loopback file system
|
||||
file-system OVERLAY # overlay file system
|
||||
file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs)
|
||||
file-system PROCFS # /proc
|
||||
file-system UMAPFS # NULLFS + uid and gid remapping
|
||||
file-system UNION # union file system
|
||||
file-system CODA # Coda File System; also needs vcoda (below)
|
||||
file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
||||
file-system PTYFS # /dev/ptm support
|
||||
file-system TMPFS # Efficient memory file-system
|
||||
file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
||||
file-system HFS # experimental - Apple HFS+ (read-only)
|
||||
|
||||
# File system options
|
||||
options QUOTA # UFS quotas
|
||||
#options FFS_EI # FFS Endian Independent support
|
||||
options WAPBL # File system journaling support - Experimental
|
||||
# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
|
||||
# It is not recommended for general use.
|
||||
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
||||
options NFSSERVER # Network File System server
|
||||
#options FFS_NO_SNAPSHOT # No FFS snapshot support
|
||||
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
||||
# immutable) behave as system flags.
|
||||
|
||||
# Networking options
|
||||
|
||||
#options GATEWAY # packet forwarding
|
||||
options INET # IP + ICMP + TCP + UDP
|
||||
options INET6 # IPv6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
#options MROUTING # IP multicast routing
|
||||
#options PIM # Protocol Independent Multicast
|
||||
#options ISO,TPIP # OSI
|
||||
#options EON # OSI tunneling over IP
|
||||
options NETATALK # AppleTalk networking protocols
|
||||
options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
||||
options PPP_DEFLATE # Deflate compression support for PPP
|
||||
options PPP_FILTER # Active filter support for PPP (requires bpf)
|
||||
options PFIL_HOOKS # pfil(9) packet filter hooks
|
||||
options IPFILTER_LOG # ipmon(8) log support
|
||||
options IPFILTER_LOOKUP # ippool(8) support
|
||||
options IPFILTER_COMPAT # Compat for IP-Filter
|
||||
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
||||
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
||||
|
||||
options NFS_BOOT_BOOTP
|
||||
options NFS_BOOT_DHCP
|
||||
#options NFS_BOOT_BOOTPARAM
|
||||
|
||||
# Compatibility options
|
||||
|
||||
#options COMPAT_09 # NetBSD 0.9 compatibility.
|
||||
#options COMPAT_10 # NetBSD 1.0 compatibility.
|
||||
#options COMPAT_11 # NetBSD 1.1 compatibility.
|
||||
#options COMPAT_12 # NetBSD 1.2 compatibility.
|
||||
#options COMPAT_13 # NetBSD 1.3 compatibility.
|
||||
#options COMPAT_14 # NetBSD 1.4 compatibility.
|
||||
#options COMPAT_15 # NetBSD 1.5 compatibility.
|
||||
options COMPAT_16 # NetBSD 1.6 compatibility.
|
||||
options COMPAT_20 # NetBSD 2.0 compatibility.
|
||||
options COMPAT_30 # NetBSD 3.0 compatibility.
|
||||
options COMPAT_40 # NetBSD 4.0 compatibility.
|
||||
#options COMPAT_43 # 4.3BSD compatibility.
|
||||
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
||||
|
||||
options COMPAT_LINUX # binary compatibility with Linux
|
||||
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
||||
|
||||
# Shared memory options
|
||||
|
||||
#options SYSVMSG # System V-like message queues
|
||||
#options SYSVSEM # System V-like semaphores
|
||||
#options SEMMNI=10 # number of semaphore identifiers
|
||||
#options SEMMNS=60 # number of semaphores in system
|
||||
#options SEMUME=10 # max number of undo entries per process
|
||||
#options SEMMNU=30 # number of undo structures in system
|
||||
#options SYSVSHM # System V-like memory sharing
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
|
||||
|
||||
# Device options
|
||||
|
||||
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
|
||||
#options MEMORY_DISK_IS_ROOT # use memory disk as root
|
||||
#options MEMORY_DISK_DYNAMIC
|
||||
#options MEMORY_DISK_ROOT_SIZE=22528 # Size in blocks
|
||||
#options MEMORY_RBFLAGS=RB_AUTOBOOT
|
||||
|
||||
# Miscellaneous kernel options
|
||||
|
||||
options KTRACE # system call tracing, a la ktrace(1)
|
||||
options IRQSTATS # manage IRQ statistics
|
||||
#options KMEMSTATS # kernel memory statistics
|
||||
options MIIVERBOSE # Verbose MII autoconfuration messages
|
||||
options PCIVERBOSE # Verbose PCI descriptions
|
||||
options USBVERBOSE # verbose USB device autoconfig messages
|
||||
#options DDB_KEYCODE=0x40
|
||||
#options USERCONF # userconf(4) support
|
||||
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
||||
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
||||
|
||||
|
||||
config netbsd root on ? type ?
|
||||
|
||||
# The main bus device
|
||||
mainbus0 at root
|
||||
|
||||
# The boot cpu
|
||||
cpu0 at mainbus?
|
||||
|
||||
# Mervell MV88Fxx81 Orion System-on-Chip
|
||||
mvsoc0 at mainbus?
|
||||
|
||||
# On-chip PCI Express Interface
|
||||
mvpex* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip PCI Interface
|
||||
gtpci* at mvsoc? offset ? irq ?
|
||||
|
||||
# PCI bus support
|
||||
options PCI_NETBSD_CONFIGURE
|
||||
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
||||
|
||||
pci* at mvpex?
|
||||
pci* at gtpci?
|
||||
|
||||
pchb* at pci? dev ? function ? # PCI-Host bridges
|
||||
|
||||
# On-chip Serial-ATA II Host Controller (SATAHC)
|
||||
mvsata* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Gigabit Ethernet Controller Interface
|
||||
mvgbec* at mvsoc? offset ?
|
||||
mvgbe* at mvgbec? port ? irq ?
|
||||
|
||||
# On-chip USB 2.0 Interface
|
||||
ehci* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Cryptographic Engines and Security Accelerator
|
||||
#mvcesa* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Two-Wire Serial Interface (TWSI)
|
||||
gttwsi* at mvsoc? offset ? irq ?
|
||||
iic* at gttwsi? # I2C bus
|
||||
|
||||
# On-chip UART Interface
|
||||
com* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip IDMA Controller
|
||||
gtidmac* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip General Purpose I/O Port Interface
|
||||
mvsocgpp* at mvsoc? offset ? irq ?
|
||||
gpio* at mvsocgpp?
|
||||
|
||||
# On-chip Timers
|
||||
mvsoctmr* at mvsoc? offset ? irq ?
|
||||
|
||||
|
||||
# MII/PHY support
|
||||
makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs
|
||||
|
||||
# PCI IDE Controller
|
||||
mvsata* at pci? dev ? function ? # Marvell SATA Controller
|
||||
|
||||
# ATA (IDE) bus support
|
||||
atabus* at ata?
|
||||
#options ATADEBUG
|
||||
|
||||
# IDE drives
|
||||
wd* at atabus? drive? flags 0x0000
|
||||
|
||||
# ATAPI bus support
|
||||
atapibus* at atapi?
|
||||
|
||||
# ATAPI devices
|
||||
# flags have the same meaning as for IDE drives.
|
||||
sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
||||
|
||||
# SCSI bus support
|
||||
scsibus* at scsi?
|
||||
|
||||
# SCSI devices
|
||||
sd* at scsibus? target ? lun ? # SCSI disk drives
|
||||
|
||||
# USB bus support
|
||||
usb* at ehci?
|
||||
|
||||
# USB Hubs
|
||||
uhub* at usb?
|
||||
uhub* at uhub? port ?
|
||||
|
||||
# USB Mass Storage
|
||||
umass* at uhub? port ? configuration ? interface ?
|
||||
wd* at umass?
|
||||
|
||||
|
||||
# Pseudo-Devices
|
||||
|
||||
pseudo-device crypto # /dev/crypto device
|
||||
pseudo-device swcrypto # software crypto implementation
|
||||
|
||||
# disk/mass storage pseudo-devices
|
||||
pseudo-device bio # RAID control device driver
|
||||
pseudo-device ccd 4 # concatenated/striped disk devices
|
||||
pseudo-device cgd 4 # cryptographic disk devices
|
||||
pseudo-device raid 8 # RAIDframe disk driver
|
||||
options RAID_AUTOCONFIG # auto-configuration of RAID components
|
||||
# Options to enable various other RAIDframe RAID types.
|
||||
#options RF_INCLUDE_EVENODD=1
|
||||
#options RF_INCLUDE_RAID5_RS=1
|
||||
#options RF_INCLUDE_PARITYLOGGING=1
|
||||
#options RF_INCLUDE_CHAINDECLUSTER=1
|
||||
#options RF_INCLUDE_INTERDECLUSTER=1
|
||||
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
||||
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
||||
pseudo-device fss # file system snapshot device
|
||||
pseudo-device putter # for puffs and pud
|
||||
|
||||
#pseudo-device md 1 # memory disk device (ramdisk)
|
||||
pseudo-device vnd # disk-like interface to files
|
||||
options VND_COMPRESSION # compressed vnd(4)
|
||||
|
||||
# network pseudo-devices
|
||||
pseudo-device bpfilter # Berkeley packet filter
|
||||
#pseudo-device carp # Common Address Redundancy Protocol
|
||||
pseudo-device ipfilter # IP filter (firewall) and NAT
|
||||
pseudo-device loop # network loopback
|
||||
#pseudo-device ppp # Point-to-Point Protocol
|
||||
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
||||
#pseudo-device sl # Serial Line IP
|
||||
#pseudo-device strip # Starmode Radio IP (Metricom)
|
||||
#pseudo-device irframetty # IrDA frame line discipline
|
||||
#pseudo-device tap # virtual Ethernet
|
||||
#pseudo-device tun # network tunneling over tty
|
||||
#pseudo-device gre # generic L3 over IP tunnel
|
||||
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933)
|
||||
#pseudo-device faith # IPv[46] TCP relay translation i/f
|
||||
#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
||||
#pseudo-device vlan # IEEE 802.1q encapsulation
|
||||
#pseudo-device bridge # simple inter-network bridging
|
||||
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
||||
#pseudo-device agr # IEEE 802.3ad link aggregation
|
||||
#pseudo-device pf # PF packet filter
|
||||
#pseudo-device pflog # PF log if
|
||||
|
||||
# miscellaneous pseudo-devices
|
||||
pseudo-device pty # pseudo-terminals
|
||||
#pseudo-device sequencer 1 # MIDI sequencer
|
||||
pseudo-device rnd # /dev/random and in-kernel generator
|
||||
#options RND_COM
|
||||
pseudo-device clockctl # user control of clock subsystem
|
||||
pseudo-device ksyms # /dev/ksyms
|
||||
#pseudo-device bcsp # BlueCore Serial Protocol
|
||||
#pseudo-device btuart # Bluetooth HCI UART (H4)
|
||||
|
||||
# a pseudo device needed for Coda # also needs CODA (above)
|
||||
pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
||||
|
||||
# a pseudo device needed for SMBFS
|
||||
pseudo-device nsmb # experimental - SMB requester
|
||||
|
||||
# wscons pseudo-devices
|
||||
pseudo-device wsmux # mouse & keyboard multiplexor
|
||||
pseudo-device wsfont
|
||||
|
||||
# data mover pseudo-devices
|
||||
pseudo-device swdmover # softare dmover(9) back-end
|
||||
pseudo-device dmoverio # /dev/dmover dmover(9) interface
|
||||
|
||||
options FILEASSOC # fileassoc(9) - required for Veriexec
|
||||
|
||||
# Veriexec
|
||||
pseudo-device veriexec
|
||||
#
|
||||
# Uncomment the fingerprint methods below that are desired. Note that
|
||||
# removing fingerprint methods will have almost no impact on the kernel
|
||||
# code size.
|
||||
#
|
||||
options VERIFIED_EXEC_FP_RMD160
|
||||
options VERIFIED_EXEC_FP_SHA256
|
||||
options VERIFIED_EXEC_FP_SHA384
|
||||
options VERIFIED_EXEC_FP_SHA512
|
||||
options VERIFIED_EXEC_FP_SHA1
|
||||
options VERIFIED_EXEC_FP_MD5
|
||||
|
||||
options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|
||||
options PAX_ASLR=0 # PaX Address Space Layout Randomization
|
||||
|
|
@ -0,0 +1,517 @@
|
|||
# $NetBSD: SHEEVAPLUG,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
#
|
||||
# This configuration supports for generically Marvell SheevaPlug
|
||||
#
|
||||
|
||||
include "arch/evbarm/conf/std.marvell"
|
||||
|
||||
options INCLUDE_CONFIG_FILE # embed config file in kernel binary
|
||||
|
||||
# estimated number of users
|
||||
|
||||
maxusers 32
|
||||
|
||||
# Board Type
|
||||
makeoptions BOARDTYPE="sheevaplug"
|
||||
options EVBARM_BOARDTYPE=sheevaplug
|
||||
|
||||
# CPU options
|
||||
options CPU_SHEEVA
|
||||
#options MV_L2_CACHE_ENABLE
|
||||
#options MV_L2_CACHE_WRITE_THROUGH
|
||||
options MV_CACHE_RANGE_OPS
|
||||
makeoptions CPUFLAGS="-march=armv5te"
|
||||
|
||||
# Marvell SoC options
|
||||
options KIRKWOOD
|
||||
|
||||
# Standard system options
|
||||
|
||||
options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
|
||||
#options NTP # NTP phase/frequency locked loop
|
||||
|
||||
# File systems
|
||||
|
||||
file-system FFS # UFS
|
||||
file-system EXT2FS # second extended file system (linux)
|
||||
#file-system LFS # log-structured file system
|
||||
#file-system MFS # memory file system
|
||||
file-system NFS # Network File System client
|
||||
#file-system NTFS # Windows/NT file system (experimental)
|
||||
#file-system CD9660 # ISO 9660 + Rock Ridge file system
|
||||
file-system MSDOSFS # MS-DOS file system
|
||||
file-system FDESC # /dev/fd
|
||||
file-system KERNFS # /kern
|
||||
#file-system NULLFS # loopback file system
|
||||
#file-system OVERLAY # overlay file system
|
||||
#file-system PORTAL # portal filesystem (still experimental)
|
||||
file-system PROCFS # /proc
|
||||
#file-system UMAPFS # NULLFS + uid and gid remapping
|
||||
#file-system UNION # union file system
|
||||
#file-system CODA # Coda File System; also needs vcoda (below)
|
||||
#file-system SMBFS # experimental - CIFS; also needs nsmb (below)
|
||||
file-system PTYFS # /dev/ptm support
|
||||
file-system TMPFS # Efficient memory file-system
|
||||
#file-system UDF # experimental - OSTA UDF CD/DVD file-system
|
||||
#file-system HFS # experimental - Apple HFS+ (read-only)
|
||||
|
||||
# File system options
|
||||
#options QUOTA # UFS quotas
|
||||
#options FFS_EI # FFS Endian Independent support
|
||||
options WAPBL # File system journaling support - Experimental
|
||||
# Note that UFS_DIRHASH is suspected of causing kernel memory corruption.
|
||||
# It is not recommended for general use.
|
||||
#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
|
||||
options NFSSERVER # Network File System server
|
||||
options FFS_NO_SNAPSHOT # No FFS snapshot support
|
||||
#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
|
||||
# immutable) behave as system flags.
|
||||
|
||||
# Networking options
|
||||
|
||||
#options GATEWAY # packet forwarding
|
||||
options INET # IP + ICMP + TCP + UDP
|
||||
options INET6 # IPv6
|
||||
#options IPSEC # IP security
|
||||
#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
|
||||
#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
|
||||
#options IPSEC_DEBUG # debug for IP security
|
||||
#options MROUTING # IP multicast routing
|
||||
#options PIM # Protocol Independent Multicast
|
||||
#options ISO,TPIP # OSI
|
||||
#options EON # OSI tunneling over IP
|
||||
#options NETATALK # AppleTalk networking protocols
|
||||
#options PPP_BSDCOMP # BSD-Compress compression support for PPP
|
||||
#options PPP_DEFLATE # Deflate compression support for PPP
|
||||
#options PPP_FILTER # Active filter support for PPP (requires bpf)
|
||||
#options PFIL_HOOKS # pfil(9) packet filter hooks
|
||||
#options IPFILTER_LOG # ipmon(8) log support
|
||||
#options IPFILTER_LOOKUP # ippool(8) support
|
||||
#options IPFILTER_COMPAT # Compat for IP-Filter
|
||||
#options IPFILTER_DEFAULT_BLOCK # block all packets by default
|
||||
#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
|
||||
|
||||
#options NFS_BOOT_BOOTP
|
||||
options NFS_BOOT_DHCP
|
||||
#options NFS_BOOT_BOOTPARAM
|
||||
|
||||
# Compatibility options
|
||||
|
||||
#options COMPAT_09 # NetBSD 0.9 compatibility.
|
||||
#options COMPAT_10 # NetBSD 1.0 compatibility.
|
||||
#options COMPAT_11 # NetBSD 1.1 compatibility.
|
||||
#options COMPAT_12 # NetBSD 1.2 compatibility.
|
||||
#options COMPAT_13 # NetBSD 1.3 compatibility.
|
||||
#options COMPAT_14 # NetBSD 1.4 compatibility.
|
||||
#options COMPAT_15 # NetBSD 1.5 compatibility.
|
||||
#options COMPAT_16 # NetBSD 1.6 compatibility.
|
||||
#options COMPAT_20 # NetBSD 2.0 compatibility.
|
||||
#options COMPAT_30 # NetBSD 3.0 compatibility.
|
||||
#options COMPAT_40 # NetBSD 4.0 compatibility.
|
||||
options COMPAT_50 # NetBSD 5.0 compatibility.
|
||||
#options COMPAT_43 # 4.3BSD compatibility.
|
||||
#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
|
||||
|
||||
options COMPAT_OSSAUDIO # OSS (Voxware) audio driver compatibility
|
||||
options COMPAT_LINUX # binary compatibility with Linux
|
||||
options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
|
||||
|
||||
# Shared memory options
|
||||
|
||||
options SYSVMSG # System V-like message queues
|
||||
options SYSVSEM # System V-like semaphores
|
||||
#options SEMMNI=10 # number of semaphore identifiers
|
||||
#options SEMMNS=60 # number of semaphores in system
|
||||
#options SEMUME=10 # max number of undo entries per process
|
||||
#options SEMMNU=30 # number of undo structures in system
|
||||
options SYSVSHM # System V-like memory sharing
|
||||
#options SHMMAXPGS=1024 # 1024 pages is the default
|
||||
options P1003_1B_SEMAPHORE # p1003.1b semaphore support
|
||||
|
||||
# Device options
|
||||
|
||||
#options MEMORY_DISK_HOOKS # boottime setup of ramdisk
|
||||
#options MEMORY_DISK_IS_ROOT # use memory disk as root
|
||||
#options MEMORY_DISK_DYNAMIC
|
||||
#options MEMORY_DISK_ROOT_SIZE=22528 # Size in blocks
|
||||
#options MEMORY_RBFLAGS=RB_AUTOBOOT
|
||||
|
||||
# Miscellaneous kernel options
|
||||
|
||||
#options KTRACE # system call tracing, a la ktrace(1)
|
||||
options IRQSTATS # manage IRQ statistics
|
||||
#options LKM # loadable kernel modules
|
||||
#options KMEMSTATS # kernel memory statistics
|
||||
options MIIVERBOSE # Verbose MII autoconfuration messages
|
||||
#options PCIVERBOSE # Verbose PCI descriptions
|
||||
options USBVERBOSE # verbose USB device autoconfig messages
|
||||
#options DDB_KEYCODE=0x40
|
||||
#options USERCONF # userconf(4) support
|
||||
#options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
|
||||
#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
|
||||
|
||||
# Development and Debugging options
|
||||
|
||||
#options PERFCTRS # performance counters
|
||||
options DIAGNOSTIC # internally consistency checks
|
||||
options DEBUG
|
||||
#options PMAP_DEBUG # Enable pmap_debug_level code
|
||||
#options VERBOSE_INIT_ARM # verbose bootstraping messages
|
||||
options DDB # in-kernel debugger
|
||||
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
|
||||
#options KGDB
|
||||
#options DEBUG_KGDB
|
||||
makeoptions DEBUG="-g -O2" # compile full symbol table
|
||||
options SYMTAB_SPACE=500000
|
||||
#options AUDIO_DEBUG=2
|
||||
|
||||
config netbsd root on ? type ?
|
||||
|
||||
# The main bus device
|
||||
mainbus0 at root
|
||||
|
||||
# The boot cpu
|
||||
cpu0 at mainbus?
|
||||
|
||||
# Marvell MV88F6xxx Kirkwood System-on-chip
|
||||
mvsoc0 at mainbus?
|
||||
|
||||
# On-chip PCI Express Interface
|
||||
#mvpex* at mvsoc? offset ? irq ?
|
||||
|
||||
# PCI bus support
|
||||
options PCI_NETBSD_CONFIGURE
|
||||
#options PCI_CONFIG_DUMP # verbosely dump PCI config space
|
||||
|
||||
#pci* at mvpex?
|
||||
|
||||
#pchb* at pci? dev ? function ? # PCI-Host bridges
|
||||
|
||||
# On-chip Serial-ATA II Host Controller (SATAHC)
|
||||
#mvsata* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Gigabit Ethernet Controller Interface
|
||||
mvgbec* at mvsoc? offset ?
|
||||
mvgbe* at mvgbec? port ? irq ?
|
||||
makphy* at mii? phy ?
|
||||
|
||||
# On-chip USB 2.0 Interface
|
||||
ehci* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Cryptographic Engines and Security Accelerator
|
||||
#mvcesa* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip Two-Wire Serial Interface (TWSI)
|
||||
gttwsi* at mvsoc? offset ? irq ?
|
||||
iic* at gttwsi?
|
||||
|
||||
# On-chip UART Interface
|
||||
com* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip IDMA Controller
|
||||
#gtidmac* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip General Purpose I/O Port Interface
|
||||
#mvsocgpp* at mvsoc? offset ? irq ?
|
||||
#gpio* at mvsocgpp?
|
||||
|
||||
# On-chip Timers
|
||||
mvsoctmr* at mvsoc? offset ? irq ?
|
||||
|
||||
# On-chip SD/MMC Interface
|
||||
mvsdio* at mvsoc? offset ? irq ?
|
||||
sdmmc* at mvsdio?
|
||||
|
||||
ld* at sdmmc?
|
||||
|
||||
# ATA (IDE) bus support
|
||||
#atabus* at ata?
|
||||
#options ATADEBUG
|
||||
|
||||
# IDE drives
|
||||
#wd* at atabus? drive ? flags 0x0000
|
||||
|
||||
# ATAPI bus support
|
||||
#atapibus* at atapi?
|
||||
|
||||
# ATAPI devices
|
||||
# flags have the same meaning as for IDE drives.
|
||||
#cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives
|
||||
#sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives
|
||||
|
||||
# USB bus support
|
||||
usb* at ehci?
|
||||
|
||||
# USB Hubs
|
||||
uhub* at usb?
|
||||
uhub* at uhub? port ?
|
||||
|
||||
# USB HID device
|
||||
uhidev* at uhub? port ? configuration ? interface ?
|
||||
|
||||
# USB Mice
|
||||
ums* at uhidev? reportid ?
|
||||
wsmouse* at ums? mux 0
|
||||
|
||||
# USB eGalax touch-panel
|
||||
uep* at uhub? port ?
|
||||
wsmouse* at uep? mux 0
|
||||
|
||||
# USB Keyboards
|
||||
ukbd* at uhidev? reportid ?
|
||||
wskbd* at ukbd? console ? mux 1
|
||||
|
||||
# USB TEMPer and TEMPerHUM
|
||||
uthum* at uhidev? reportid ?
|
||||
|
||||
# USB serial adapter
|
||||
ucycom* at uhidev? reportid ?
|
||||
|
||||
# USB Generic HID devices
|
||||
uhid* at uhidev? reportid ?
|
||||
|
||||
# USB LCDs and USB-VGA adaptors
|
||||
udl* at uhub? port ? # DisplayLink DL-1x0/1x5
|
||||
wsdisplay* at udl?
|
||||
|
||||
# USB Printer
|
||||
ulpt* at uhub? port ? configuration ? interface ?
|
||||
|
||||
# USB Modem
|
||||
umodem* at uhub? port ? configuration ?
|
||||
ucom* at umodem?
|
||||
|
||||
# Option N.V. Wireless WAN modems
|
||||
uhso* at uhub? port ? configuration ?
|
||||
|
||||
# USB Mass Storage
|
||||
umass* at uhub? port ? configuration ? interface ?
|
||||
wd* at umass?
|
||||
scsibus* at scsi?
|
||||
sd* at scsibus? target ? lun ? # SCSI disk drives
|
||||
cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
|
||||
|
||||
# USB audio
|
||||
uaudio* at uhub? port ? configuration ?
|
||||
|
||||
# USB MIDI
|
||||
umidi* at uhub? port ? configuration ?
|
||||
|
||||
# USB IrDA
|
||||
# USB-IrDA bridge spec
|
||||
uirda* at uhub? port ? configuration ? interface ?
|
||||
irframe* at uirda?
|
||||
|
||||
stuirda* at uhub? port ? configuration ? interface ?
|
||||
irframe* at stuirda?
|
||||
|
||||
# SigmaTel STIr4200 USB/IrDA Bridge
|
||||
ustir* at uhub? port ?
|
||||
irframe* at ustir?
|
||||
|
||||
# USB Ethernet adapters
|
||||
aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters
|
||||
axe* at uhub? port ? # ASIX AX88172 based adapters
|
||||
cdce* at uhub? port ? # CDC, Ethernet Networking Control Model
|
||||
cue* at uhub? port ? # CATC USB-EL1201A based adapters
|
||||
kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters
|
||||
udav* at uhub? port ? # Davicom DM9601 based adapters
|
||||
url* at uhub? port ? # Realtek RTL8150L based adapters
|
||||
|
||||
# USB 802.11 adapters
|
||||
atu* at uhub? port ? # Atmel AT76C50XX based adapters
|
||||
ral* at uhub? port ? # Ralink Technology RT25x0 802.11a/b/g
|
||||
rum* at uhub? port ? # Ralink Technology RT2501/RT2601 802.11a/b/g
|
||||
zyd* at uhub? port ? # Zydas ZD1211
|
||||
|
||||
# Prolific PL2301/PL2302 host-to-host adapter
|
||||
upl* at uhub? port ?
|
||||
|
||||
# Serial adapters
|
||||
ubsa* at uhub? port ? # Belkin serial adapter
|
||||
ucom* at ubsa? portno ?
|
||||
|
||||
uchcom* at uhub? port ? # WinChipHead CH341/CH340 serial adapter
|
||||
ucom* at uchcom? portno ?
|
||||
|
||||
uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter
|
||||
ucom* at uftdi? portno ?
|
||||
|
||||
uipaq* at uhub? port ? # iPAQ PDAs
|
||||
ucom* at uipaq? portno ?
|
||||
|
||||
umct* at uhub? port ? # MCT USB-RS232 serial adapter
|
||||
ucom* at umct? portno ?
|
||||
|
||||
uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter
|
||||
ucom* at uplcom? portno ?
|
||||
|
||||
uslsa* at uhub? port ? # Silicon Labs USB-RS232 serial adapter
|
||||
ucom* at uslsa? portno ?
|
||||
|
||||
uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter
|
||||
ucom* at uvscom? portno ?
|
||||
|
||||
# RIM BlackBerry
|
||||
uberry* at uhub? port ?
|
||||
|
||||
# Diamond Multimedia Rio 500
|
||||
urio* at uhub? port ?
|
||||
|
||||
# USB Handspring Visor
|
||||
uvisor* at uhub? port ?
|
||||
ucom* at uvisor?
|
||||
|
||||
# Kyocera AIR-EDGE PHONE
|
||||
ukyopon* at uhub? port ?
|
||||
ucom* at ukyopon? portno ?
|
||||
|
||||
# USB scanners
|
||||
uscanner* at uhub? port ?
|
||||
|
||||
# USB scanners that use SCSI emulation, e.g., HP5300
|
||||
usscanner* at uhub? port ?
|
||||
|
||||
# Topfield TF5000PVR range of DVB recorders
|
||||
utoppy* at uhub? port ?
|
||||
|
||||
# Y@P firmware loader
|
||||
uyap* at uhub? port ?
|
||||
|
||||
# D-Link DSB-R100 USB radio
|
||||
udsbr* at uhub? port ?
|
||||
radio* at udsbr?
|
||||
|
||||
# USB Generic driver
|
||||
ugen* at uhub? port ?
|
||||
|
||||
# USB 3G datacards
|
||||
u3ginit* at uhub? port ?
|
||||
u3g* at uhub? port ?
|
||||
ucom* at u3g?
|
||||
|
||||
# USB generic serial port (e.g., data over cellular)
|
||||
ugensa* at uhub? port ?
|
||||
ucom* at ugensa?
|
||||
|
||||
# Bluetooth Controller and Device support
|
||||
|
||||
# Bluetooth SDIO Controller
|
||||
sbt* at sdmmc?
|
||||
|
||||
# Bluetooth USB Controllers
|
||||
ubt* at uhub? port ?
|
||||
|
||||
# Bluetooth Device Hub
|
||||
bthub* at ubt?
|
||||
|
||||
# Bluetooth HID support
|
||||
bthidev* at bthub?
|
||||
|
||||
# Bluetooth Mouse
|
||||
btms* at bthidev? reportid ?
|
||||
wsmouse* at btms? mux 0
|
||||
|
||||
# Bluetooth Keyboard
|
||||
btkbd* at bthidev? reportid ?
|
||||
wskbd* at btkbd? console ? mux 1
|
||||
|
||||
# Bluetooth Apple Magic Mouse
|
||||
btmagic* at bthub?
|
||||
wsmouse* at btmagic? mux 0
|
||||
|
||||
# Bluetooth Audio support
|
||||
btsco* at bthub?
|
||||
|
||||
|
||||
# Audio support
|
||||
audio* at audiobus?
|
||||
|
||||
# Pseudo-Devices
|
||||
|
||||
pseudo-device crypto # /dev/crypto device
|
||||
pseudo-device swcrypto # software crypto implementation
|
||||
|
||||
# disk/mass storage pseudo-devices
|
||||
#pseudo-device bio # RAID control device driver
|
||||
#pseudo-device ccd 4 # concatenated/striped disk devices
|
||||
#pseudo-device cgd 4 # cryptographic disk devices
|
||||
#pseudo-device raid 8 # RAIDframe disk driver
|
||||
#options RAID_AUTOCONFIG # auto-configuration of RAID components
|
||||
# Options to enable various other RAIDframe RAID types.
|
||||
#options RF_INCLUDE_EVENODD=1
|
||||
#options RF_INCLUDE_RAID5_RS=1
|
||||
#options RF_INCLUDE_PARITYLOGGING=1
|
||||
#options RF_INCLUDE_CHAINDECLUSTER=1
|
||||
#options RF_INCLUDE_INTERDECLUSTER=1
|
||||
#options RF_INCLUDE_PARITY_DECLUSTERING=1
|
||||
#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
|
||||
#pseudo-device fss # file system snapshot device
|
||||
|
||||
#pseudo-device md 1 # memory disk device (ramdisk)
|
||||
pseudo-device vnd # disk-like interface to files
|
||||
options VND_COMPRESSION # compressed vnd(4)
|
||||
|
||||
# network pseudo-devices
|
||||
pseudo-device bpfilter # Berkeley packet filter
|
||||
#pseudo-device carp # Common Address Redundancy Protocol
|
||||
#pseudo-device ipfilter # IP filter (firewall) and NAT
|
||||
pseudo-device loop # network loopback
|
||||
#pseudo-device ppp # Point-to-Point Protocol
|
||||
#pseudo-device pppoe # PPP over Ethernet (RFC 2516)
|
||||
#pseudo-device sl # Serial Line IP
|
||||
#pseudo-device strip # Starmode Radio IP (Metricom)
|
||||
#pseudo-device irframetty # IrDA frame line discipline
|
||||
pseudo-device tap # virtual Ethernet
|
||||
#pseudo-device tun # network tunneling over tty
|
||||
#pseudo-device gre # generic L3 over IP tunnel
|
||||
#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC 1933)
|
||||
#pseudo-device faith # IPv[46] TCP relay translation i/f
|
||||
pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
|
||||
#pseudo-device vlan # IEEE 802.1q encapsulation
|
||||
#pseudo-device bridge # simple inter-network bridging
|
||||
#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
|
||||
#pseudo-device agr # IEEE 802.3ad link aggregation
|
||||
#pseudo-device pf # PF packet filter
|
||||
#pseudo-device pflog # PF log if
|
||||
|
||||
# miscellaneous pseudo-devices
|
||||
pseudo-device pty # pseudo-terminals
|
||||
#pseudo-device sequencer 1 # MIDI sequencer
|
||||
pseudo-device rnd # /dev/random and in-kernel generator
|
||||
#options RND_COM
|
||||
pseudo-device clockctl # user control of clock subsystem
|
||||
pseudo-device ksyms # /dev/ksyms
|
||||
|
||||
# a pseudo device needed for Coda # also needs CODA (above)
|
||||
#pseudo-device vcoda 4 # coda minicache <-> venus comm.
|
||||
|
||||
# a pseudo device needed for SMBFS
|
||||
#pseudo-device nsmb # experimental - SMB requester
|
||||
|
||||
# wscons pseudo-devices
|
||||
#pseudo-device wsmux # mouse & keyboard multiplexor
|
||||
#pseudo-device wsfont
|
||||
|
||||
# data mover pseudo-devices
|
||||
pseudo-device swdmover # softare dmover(9) back-end
|
||||
pseudo-device dmoverio # /dev/dmover dmover(9) interface
|
||||
|
||||
#options FILEASSOC # fileassoc(9) - required for Veriexec
|
||||
|
||||
# Veriexec
|
||||
#pseudo-device veriexec
|
||||
#
|
||||
# Uncomment the fingerprint methods below that are desired. Note that
|
||||
# removing fingerprint methods will have almost no impact on the kernel
|
||||
# code size.
|
||||
#
|
||||
#options VERIFIED_EXEC_FP_RMD160
|
||||
#options VERIFIED_EXEC_FP_SHA256
|
||||
#options VERIFIED_EXEC_FP_SHA384
|
||||
#options VERIFIED_EXEC_FP_SHA512
|
||||
#options VERIFIED_EXEC_FP_SHA1
|
||||
#options VERIFIED_EXEC_FP_MD5
|
||||
|
||||
#options PAX_MPROTECT=0 # PaX mprotect(2) restrictions
|
||||
#options PAX_ASLR=0 # PaX Address Space Layout Randomization
|
||||
|
|
@ -0,0 +1,9 @@
|
|||
# $NetBSD: files.marvell,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
#
|
||||
# Marvell Orion, Discovery Innovation and Kirkwood NASs configuration info
|
||||
#
|
||||
|
||||
file arch/evbarm/marvell/marvell_machdep.c
|
||||
|
||||
# CPU support and integrated peripherals
|
||||
include "arch/arm/marvell/files.marvell"
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
# $NetBSD: mk.marvell,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
|
||||
SYSTEM_FIRST_OBJ= marvell_start.o
|
||||
SYSTEM_FIRST_SFILE= ${THISARM}/marvell/marvell_start.S
|
||||
|
||||
_OSRELEASE!= ${HOST_SH} $S/conf/osrelease.sh
|
||||
|
||||
KERNEL_BASE_PHYS=0x00008000
|
||||
KERNEL_BASE_VIRT=0xc0008000
|
||||
|
||||
.if ${USETOOLS} == "yes"
|
||||
MKUBOOTIMAGE= ${TOOLDIR}/bin/${_TOOL_PREFIX}mkubootimage
|
||||
.else
|
||||
MKUBOOTIMAGE= mkubootimage
|
||||
.endif
|
||||
MKUBOOTIMAGEARGS= -A arm -T kernel
|
||||
MKUBOOTIMAGEARGS+= -a $(KERNEL_BASE_PHYS)
|
||||
MKUBOOTIMAGEARGS+= -n "NetBSD/$(BOARDTYPE) ${_OSRELEASE}"
|
||||
MKUBOOTIMAGEARGS_NONE= ${MKUBOOTIMAGEARGS} -C none
|
||||
MKUBOOTIMAGEARGS_GZ= ${MKUBOOTIMAGEARGS} -C gz
|
||||
|
||||
#
|
||||
# These not have expanding buffer over 4Mbyte. (before version 1.1.5)
|
||||
# And these cannot handle the endian of entry point. (1.1.4 and older)
|
||||
#
|
||||
SYSTEM_LD_TAIL_EXTRA+=; \
|
||||
echo ${OBJCOPY} -S -O binary $@ $@.bin; \
|
||||
${OBJCOPY} -S -O binary $@ $@.bin; \
|
||||
echo gzip -c $@.bin > $@.bin.gz; \
|
||||
gzip -c $@.bin > $@.bin.gz; \
|
||||
echo ${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_GZ} $@.bin.gz $@.gz.ub; \
|
||||
${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_GZ} $@.bin.gz $@.gz.ub; \
|
||||
echo ${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_NONE} $@.bin $@.ub; \
|
||||
${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_NONE} $@.bin $@.ub; \
|
||||
echo ${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_NONE:C/((-a (0x)*)([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2}))/\1 -e \3\7\6\5\4/W} $@.bin $@-old.ub; \
|
||||
${MKUBOOTIMAGE} ${MKUBOOTIMAGEARGS_NONE:C/((-a (0x)*)([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2})([0-9a-f]{2}))/\1 -e \3\7\6\5\4/W} $@.bin $@-old.ub; \
|
||||
echo
|
||||
|
||||
EXTRA_KERNELS+= ${KERNELS:@.KERNEL.@${.KERNEL.}.bin@}
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
# $NetBSD: std.marvell,v 1.1 2010/10/02 06:15:52 kiyohara Exp $
|
||||
#
|
||||
# standard NetBSD/evbarm for MAEVELL options
|
||||
|
||||
machine evbarm arm
|
||||
include "conf/std" # MI standard options
|
||||
|
||||
include "arch/evbarm/conf/files.marvell"
|
||||
|
||||
options EXEC_ELF32
|
||||
options EXEC_SCRIPT
|
||||
|
||||
# To support easy transit to ../arch/arm/arm32
|
||||
options ARM32
|
||||
options __HAVE_PCI_CONF_HOOK # should be in types.h
|
||||
|
||||
options COM_REGMAP
|
||||
|
||||
options KERNEL_BASE_EXT=0xc0000000
|
||||
makeoptions LOADADDRESS="0xc0008000"
|
||||
makeoptions BOARDMKFRAG="${THISARM}/conf/mk.marvell"
|
||||
options ARM_INTR_IMPL="<arch/arm/marvell/mvsoc_intr.h>"
|
||||
Loading…
Reference in New Issue