From 10a8873653df0d8a500b2e5daecb05d07bfb2173 Mon Sep 17 00:00:00 2001
From: wiz <wiz@NetBSD.org>
Date: Thu, 12 Aug 2004 14:43:33 +0000
Subject: [PATCH] Comment out mkboot(8) reference; use \*[Gt] instead of >; two
 grammar improvements; use Nm instead of Xr to ourselves.

---
 share/man/man8/man8.hp700/boot.8 | 34 ++++++++++++++++----------------
 1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/share/man/man8/man8.hp700/boot.8 b/share/man/man8/man8.hp700/boot.8
index 6986082ccdb9..6ebabac0a5fc 100644
--- a/share/man/man8/man8.hp700/boot.8
+++ b/share/man/man8/man8.hp700/boot.8
@@ -1,4 +1,4 @@
-.\"	$NetBSD: boot.8,v 1.1 2004/08/07 22:05:08 chs Exp $
+.\"	$NetBSD: boot.8,v 1.2 2004/08/12 14:43:33 wiz Exp $
 .\"
 .\"	$OpenBSD: boot_hppa.8,v 1.11 2004/05/25 22:27:44 jmc Exp $
 .\"
@@ -52,14 +52,14 @@ archive, either on a disk device, or via the network, using the
 or
 .Em rboot
 protocols, depending on the PDC version.
-A small
-.Xr mkboot 8
-utility
-is provided for combining primary boot and a number
-of images (OS kernels or standalone binaries)
-into one
-.Dq LIF
-volume suitable for booting.
+.\" A small
+.\" .Xr mkboot 8
+.\" utility
+.\" is provided for combining primary boot and a number
+.\" of images (OS kernels or standalone binaries)
+.\" into one
+.\" .Dq LIF
+.\" volume suitable for booting.
 .Ss PDC concepts
 If autoboot is enabled, the PDC will attempt to boot from the specified
 .Dq boot path
@@ -81,15 +81,15 @@ the current operation, unless the PDC has been configured in
 stands for
 .Dq Initial System Loader
 and is the
-.Xr boot 8
+.Nm
 program in
 .Nx .
 On all versions of the PDC except for the 712 and 725 models the
 .Dq boot
 command (see below) will be followed by the question:
-.Dq Interact with IPL (Y, N, or Cancel)?>
+.Dq Interact with IPL (Y, N, or Cancel)?\*[Gt]
 where a positive answer will invoke an interactive prompt in the
-.Xr boot 8
+.Nm
 program later and negative will thus suppress it.
 A cancellation will abort the boot process.
 .Pp
@@ -98,9 +98,9 @@ On the 712 and 725 models firmware an additional
 argument should be given to the
 .Dq boot
 command to invoke the
-.Xr boot 8
+.Nm
 interactive prompt.
-With the default behaviour being a non-interactive boot process.
+The default behaviour is a non-interactive boot process.
 .\"
 .Ss Old PDC operation
 This version is used on the following models:
@@ -140,7 +140,7 @@ resume an interrupted boot sequence.
 The
 .Dq Boot Administration
 mode, recognizable with its
-.Em BOOT_ADMIN>
+.Em BOOT_ADMIN\*[Gt]
 prompt, controls the various boot options.
 The complete list of commands depends on the machine and PDC version.
 The following list only mentions commands impacting the boot process.
@@ -208,10 +208,10 @@ will list the various path settings.
 .El
 .\"
 .Ss Modern PDC operation
-Machines equipped with 7100LC, 7200 or 7300LC CPU types are
+Machines equipped with 7100LC, 7200, or 7300LC CPU types are
 usually blessed with a different kind of PDC.
 There is only one interactive mode, with a
-.Em BOOT_ADMIN>
+.Em BOOT_ADMIN\*[Gt]
 prompt, which provides both boot settings and commands.
 The complete list of commands depends on the machine and PDC version.
 The following list only mentions commands impacting the boot process.