Add ScanLogic SL811HS/T USB Host Controller and USB stuff.

sys/arch/x68k/conf/ALL

@@ -1,4 +1,4 @@
-#	$NetBSD: ALL,v 1.52 2002/06/17 05:14:28 lukem Exp $
+#	$NetBSD: ALL,v 1.53 2002/08/11 13:19:35 isaki Exp $
 
 #
 #	ALL -- everything that currently exist including experimental
@@ -8,7 +8,7 @@ include "arch/x68k/conf/std.x68k"
 
 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
 
-#ident 		"ALL-$Revision: 1.52 $"
+#ident 		"ALL-$Revision: 1.53 $"
 
 maxusers	32
 
@@ -111,8 +111,10 @@ options 	DIAGNOSTIC	# extra kernel sanity checking
 ## on the system console
 options 	DEBUG
 
-## Make SCSI error messages more verbose when explaining their meanings.
+## These options enable verbose messages for several subsystems.
-options 	SCSIVERBOSE
+## Warning, these may compile large string tables into the kernel!
+options 	SCSIVERBOSE	# human readable SCSI error messages
+options 	USBVERBOSE	# verbose USB device autoconfig messages
 
 ## `INSECURE' turns off the kernel security level (securelevel = 0 always).
 ## This allows writing to /dev/mem, loading kernel modules while multi-user,
@@ -264,6 +266,112 @@ neptune1 at intio0 addr 0xece400 intr 249	# Neptune-X at alt. addr.
 ne*	at neptune? addr 0x300			# NE2000 or clone
 
 
+## MII/PHY support for USB ethernet
+acphy*	at mii? phy ?
+
+## USB Controller and Devices; Experimental
+
+# Nereid USB controllers
+slhci0	at intio0 addr 0xece380 intr 251
+slhci1	at intio0 addr 0xeceb80 intr 250
+#options	SLHCI_DEBUG
+
+# USB bus support
+usb*	at slhci?
+
+# USB Hubs
+uhub*	at usb?
+uhub*	at uhub? port ? configuration ? interface ?
+
+# USB HID device
+uhidev*	at uhub? port ? configuration ? interface ?
+
+# USB Mice; not supported wscons yet
+#ums*	at uhidev? reportid ?
+#wsmouse* at ums? mux 0
+
+# USB Keyboards; not supported wscons yet
+#ukbd*	at uhidev? reportid ?
+#wskbd*	at ukbd? console ? mux 1
+
+# USB Generic HID devices
+uhid*	at uhidev? reportid ?
+
+# USB Printer
+ulpt*	at uhub? port ? configuration ? interface ?
+
+# USB Modem
+umodem*	at uhub? port ? configuration ?
+ucom*	at umodem?
+
+# USB Mass Storage; wd not supported
+#umass*	at uhub? port ? configuration ? interface ?
+#atapibus* at umass? channel ?
+#scsibus* at umass? channel ?
+#wd* at umass?
+
+# USB audio
+uaudio*	at uhub? port ? configuration ?
+
+# USB MIDI
+umidi* at uhub? port ? configuration ?
+
+# USB IrDA
+# USB-IrDA bridge spec
+uirda* at uhub? port ? configuration ? interface ?
+irframe* at uirda?
+
+# SigmaTel STIr4200 USB/IrDA Bridge
+ustir* at uhub? port ?
+irframe* at ustir?
+
+# USB Ethernet adapters
+aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
+cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
+kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters
+url*	at uhub? port ?		# Realtek RTL8150L based adapters
+
+# Prolific PL2301/PL2302 host-to-host adapter
+upl*	at uhub? port ?
+
+# Serial adapters
+uftdi*	at uhub? port ?		# FTDI FT8U100AX serial adapter
+ucom*	at uftdi? portno ?
+
+umct*	at uhub? port ?		# MCT USB-RS232 serial adapter
+ucom*	at umct? portno ?
+
+uplcom*	at uhub? port ?		# I/O DATA USB-RSAQ2 serial adapter
+ucom*	at uplcom? portno ?
+
+uvscom*	at uhub? port ?		# SUNTAC Slipper U VS-10U serial adapter
+ucom*	at uvscom? portno ?
+
+# Diamond Multimedia Rio 500
+urio*	at uhub? port ?
+
+# USB Handspring Visor
+uvisor*	at uhub? port ?
+ucom*	at uvisor?
+
+# USB scanners
+uscanner* at uhub? port ?
+
+# USB scanners that use SCSI emulation, e.g., HP5300
+usscanner* at uhub? port ?
+scsibus* at usscanner? channel ?
+
+# Y@P firmware loader
+uyap* at uhub? port ?
+
+# D-Link DSB-R100 USB radio
+udsbr*	at uhub? port ?
+radio*	at udsbr?
+
+# USB Generic driver
+ugen*	at uhub? port ?
+
+
 #### Pseudo devices
 
 ## A disk-like interface to files.  Can be used to create floppy, CD,