Copy IBM4xxGPx specific autoconf code from evbppc/walnut/autoconf.c.

This commit is contained in:
shige 2003-09-24 11:47:02 +00:00
parent fdc3c14ea7
commit 0a36d23137
1 changed files with 125 additions and 0 deletions

View File

@ -0,0 +1,125 @@
/* $NetBSD: ibm4xxgpx_autoconf.c,v 1.1 2003/09/24 11:47:02 shige Exp $ */
/*
* Copyright (C) 1995, 1996 Wolfgang Solfrank.
* Copyright (C) 1995, 1996 TooLs GmbH.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by TooLs GmbH.
* 4. The name of TooLs GmbH may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: ibm4xxgpx_autoconf.c,v 1.1 2003/09/24 11:47:02 shige Exp $");
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <dev/ic/comreg.h> /* For COM_FREQ */
#include <powerpc/ibm4xx/dcr405gp.h>
#include <powerpc/ibm4xx/dev/plbvar.h>
struct device *booted_device;
int booted_partition;
/*
* List of port-specific devices to attach to the processor local bus.
*/
static const struct plb_dev local_plb_devs [] = {
{ "pbus", },
{ NULL }
};
/*
* Determine device configuration for a machine.
*/
void
cpu_configure(void)
{
intr_init();
calc_delayconst();
/* Make sure that timers run at CPU frequency */
mtdcr(DCR_CPC0_CR1, mfdcr(DCR_CPC0_CR1) & ~CPC0_CR1_CETE);
if (config_rootfound("plb", &local_plb_devs) == NULL)
panic("configure: plb not configured");
printf("biomask %x netmask %x ttymask %x\n", (u_short)imask[IPL_BIO],
(u_short)imask[IPL_NET], (u_short)imask[IPL_TTY]);
(void)spl0();
/*
* Now allow hardware interrupts.
*/
asm volatile ("wrteei 1");
}
/*
* Setup root device.
* Configure swap area.
*/
void
cpu_rootconf(void)
{
setroot(booted_device, booted_partition);
}
void
device_register(struct device *dev, void *aux)
{
struct device *parent = dev->dv_parent;
if (strcmp(dev->dv_cfdata->cf_name, "com") == 0 &&
strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
/* Set the frequency of the on-chip UART. */
int freq = COM_FREQ * 6;
if (prop_set(dev_propdb, dev, "frequency",
&freq, sizeof(freq), PROP_INT, 0) != 0)
printf("WARNING: unable to set frequency "
"property for %s\n", dev->dv_xname);
return;
}
if (strcmp(dev->dv_cfdata->cf_name, "emac") == 0 &&
strcmp(parent->dv_cfdata->cf_name, "opb") == 0) {
/* Set the mac-addr of the on-chip Ethernet. */
/* XXX 405GP only has one; what about CPUs with two? */
if (prop_set(dev_propdb, dev, "mac-addr",
&board_data.mac_address_local,
sizeof(board_data.mac_address_local),
PROP_CONST, 0) != 0)
printf("WARNING: unable to set mac-addr "
"property for %s\n", dev->dv_xname);
return;
}
}