New sentence, new line.

This commit is contained in:
wiz 2017-08-01 11:04:21 +00:00
parent 1f3522a5b4
commit 0a00ed5042
26 changed files with 183 additions and 126 deletions

View File

@ -1,4 +1,4 @@
.\" $NetBSD: acc.4,v 1.11 2003/08/07 10:31:10 agc Exp $ .\" $NetBSD: acc.4,v 1.12 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -55,7 +55,8 @@ interface to an
It is normally used when participating It is normally used when participating
in the in the
.Tn DARPA .Tn DARPA
Internet. The controller itself is not accessible Internet.
The controller itself is not accessible
to users, but instead provides the hardware support to the to users, but instead provides the hardware support to the
.Tn IMP .Tn IMP
interface described in interface described in
@ -69,7 +70,8 @@ as shown above.
.Bl -diag .Bl -diag
.It acc%d: not alive. .It acc%d: not alive.
The initialization routine was entered even though the device The initialization routine was entered even though the device
did not autoconfigure. This indicates a system problem. did not autoconfigure.
This indicates a system problem.
.Pp .Pp
.It acc%d: can't initialize. .It acc%d: can't initialize.
Insufficient UNIBUS resources existed to initialize the device. Insufficient UNIBUS resources existed to initialize the device.
@ -81,7 +83,8 @@ to use buffered data paths on an 11/730 (which has none).
.It acc%d: imp doesn't respond, icsr=%b. .It acc%d: imp doesn't respond, icsr=%b.
The driver attempted to initialize the device, but the The driver attempted to initialize the device, but the
.Tn IMP .Tn IMP
failed to respond after 500 tries. Check the cabling. failed to respond after 500 tries.
Check the cabling.
.Pp .Pp
.It acc%d: stray xmit interrupt, csr=%b. .It acc%d: stray xmit interrupt, csr=%b.
An interrupt occurred when no output had previously been started. An interrupt occurred when no output had previously been started.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: autoconf.4,v 1.13 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: autoconf.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -55,8 +55,8 @@ slots are normally noted, thus memory controllers,
.Tn UNIBUS .Tn UNIBUS
and and
.Tn MASSBUS .Tn MASSBUS
adaptors. Devices which are not supported which adaptors.
are found in Devices which are not supported which are found in
.Tn NEXUS .Tn NEXUS
slots are noted also. slots are noted also.
The Q-bus on the The Q-bus on the
@ -67,13 +67,16 @@ is configured in the same way as the
.Tn MASSBUS .Tn MASSBUS
devices are located by a very deterministic procedure since devices are located by a very deterministic procedure since
.Tn MASSBUS .Tn MASSBUS
space is completely probe-able. If devices exist which space is completely probe-able.
If devices exist which
are not configured they will be silently ignored; if devices exist of are not configured they will be silently ignored; if devices exist of
unsupported type they will be noted. unsupported type they will be noted.
.Pp .Pp
.Tn UNIBUS .Tn UNIBUS
devices are located by probing to see if their control-status devices are located by probing to see if their control-status
registers respond. If not, they are silently ignored. If the control registers respond.
If not, they are silently ignored.
If the control
status register responds but the device cannot be made to interrupt, status register responds but the device cannot be made to interrupt,
a diagnostic warning will be printed on the console and the device a diagnostic warning will be printed on the console and the device
will not be available to the system. will not be available to the system.
@ -215,7 +218,8 @@ where
is the name for the tape device and is the name for the tape device and
.Dq Li ht0 .Dq Li ht0
is the name is the name
for the formatter. A tape slave was found on the tape formatter at the for the formatter.
A tape slave was found on the tape formatter at the
indicated drive number (on the front of the tape drive). indicated drive number (on the front of the tape drive).
.Ux .Ux
will call the device, e.g., will call the device, e.g.,
@ -255,7 +259,8 @@ where
is the name of a disk drive and is the name of a disk drive and
.Dq Li sc0 .Dq Li sc0
is the name is the name
of the controller. Analogous to of the controller.
Analogous to
.Tn MASSBUS .Tn MASSBUS
case. case.
.El .El

View File

@ -1,4 +1,4 @@
.\" $NetBSD: css.4,v 1.10 2003/08/07 10:31:10 agc Exp $ .\" $NetBSD: css.4,v 1.11 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -54,7 +54,8 @@ interface to an
It is normally used when participating It is normally used when participating
in the in the
.Tn DARPA .Tn DARPA
Internet. The controller itself is not accessible Internet.
The controller itself is not accessible
to users, but instead provides the hardware support to the to users, but instead provides the hardware support to the
.Tn IMP .Tn IMP
interface described in interface described in
@ -68,7 +69,8 @@ as shown above.
.Bl -diag .Bl -diag
.It css%d: not alive. .It css%d: not alive.
The initialization routine was entered even though the device The initialization routine was entered even though the device
did not autoconfigure. This is indicates a system problem. did not autoconfigure.
This is indicates a system problem.
.Pp .Pp
.It css%d: can't initialize. .It css%d: can't initialize.
Insufficient Insufficient
@ -82,7 +84,8 @@ to use buffered data paths on an 11/730 (which has none).
.It css%d: imp doesn't respond, icsr=%b. .It css%d: imp doesn't respond, icsr=%b.
The driver attempted to initialize the device, but the The driver attempted to initialize the device, but the
.Tn IMP .Tn IMP
failed to respond after 500 tries. Check the cabling. failed to respond after 500 tries.
Check the cabling.
.Pp .Pp
.It css%d: stray output interrupt csr=%b. .It css%d: stray output interrupt csr=%b.
An interrupt occurred when no output had previously been started. An interrupt occurred when no output had previously been started.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ddn.4,v 1.11 2003/08/07 10:31:10 agc Exp $ .\" $NetBSD: ddn.4,v 1.12 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -59,8 +59,8 @@ using
the the
.Tn ACC ACP625 .Tn ACC ACP625
.Tn X.25 .Tn X.25
board. It is normally used for connecting to board.
the Defense Data Network It is normally used for connecting to the Defense Data Network
.Pq Tn DDN . .Pq Tn DDN .
The controller itself is not accessible The controller itself is not accessible
to users, but instead provides a network interface for the to users, but instead provides a network interface for the
@ -70,7 +70,8 @@ Internet Protocol described in
.Bl -diag .Bl -diag
.It ddn%d: not alive. .It ddn%d: not alive.
The initialization routine was entered even though the device The initialization routine was entered even though the device
did not autoconfigure. This indicates a system problem. did not autoconfigure.
This indicates a system problem.
.Pp .Pp
.It ddn%d: failed getting UBA resources for lcn %d." .It ddn%d: failed getting UBA resources for lcn %d."
Insufficient Insufficient

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dh.4,v 1.15 2012/03/22 07:58:18 wiz Exp $ .\" $NetBSD: dh.4,v 1.16 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -65,7 +65,8 @@ bit number
.Ar i .Ar i
is not properly is not properly
connected, and should be treated as hard-wired with carrier connected, and should be treated as hard-wired with carrier
always present. Thus specifying always present.
Thus specifying
.Ql flags 0x0004 .Ql flags 0x0004
for for
.Li dh0 .Li dh0
@ -107,10 +108,12 @@ the driver polls for input 30 times per second.
No response from No response from
.Tn UNIBUS .Tn UNIBUS
on a DMA transfer on a DMA transfer
within a timeout period. This is often followed by a within a timeout period.
This is often followed by a
.Tn UNIBUS .Tn UNIBUS
adapter adapter
error. This occurs most frequently when the error.
This occurs most frequently when the
.Tn UNIBUS .Tn UNIBUS
is heavily loaded is heavily loaded
and when devices which hog the bus (such as and when devices which hog the bus (such as
@ -120,8 +123,8 @@ It is not serious.
.Pp .Pp
.It dh%d: silo overflow. .It dh%d: silo overflow.
The character input silo overflowed The character input silo overflowed
before it could be serviced. This can happen if a hard error occurs before it could be serviced.
when the This can happen if a hard error occurs when the
.Tn CPU .Tn CPU
is running with elevated priority, as the system will is running with elevated priority, as the system will
then print a message on the console with interrupts disabled. then print a message on the console with interrupts disabled.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dl.4,v 1.14 2017/07/04 06:39:17 wiz Exp $ .\" $NetBSD: dl.4,v 1.15 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1997 Ben Harris. All rights reserved. .\" Copyright (c) 1997 Ben Harris. All rights reserved.
.\" .\"
@ -41,8 +41,8 @@ The
.Nm .Nm
driver controls a driver controls a
.Tn DL-11 Ns -compatible .Tn DL-11 Ns -compatible
asynchronous serial card, and probably things compatible with it. A asynchronous serial card, and probably things compatible with it.
four-port A four-port
.Tn DLV-11J .Tn DLV-11J
will appear four times in the device list, as the ports look like will appear four times in the device list, as the ports look like
separate cards to the driver. separate cards to the driver.
@ -54,7 +54,8 @@ driver provides the normal interface described in
.Xr tty 4 , .Xr tty 4 ,
but many of the configuration calls are unsupported, since their but many of the configuration calls are unsupported, since their
functions are handled by jumpers or switches on the serial card functions are handled by jumpers or switches on the serial card
itself. Calls related to modem-control lines are also ignored, since itself.
Calls related to modem-control lines are also ignored, since
these cards lack them. these cards lack them.
.Pp .Pp
There's a chance this driver might also work with an There's a chance this driver might also work with an
@ -94,8 +95,10 @@ The
.Tn DL-11 .Tn DL-11
and friends only have single-character receive and transmit buffers, and friends only have single-character receive and transmit buffers,
so an interrupt is generated for every character received or so an interrupt is generated for every character received or
transmitted. Attempting to receive data at even moderately high rates transmitted.
will cause rx overruns. Fast transmission seems to be fine though. Attempting to receive data at even moderately high rates
will cause rx overruns.
Fast transmission seems to be fine though.
.Pp .Pp
There is no support in the driver for the paper-tape reader on an There is no support in the driver for the paper-tape reader on an
.Tn LT33 .Tn LT33
@ -111,7 +114,8 @@ interrupt vector is that of the transmitter.
.Pp .Pp
In order to determine the card's interrupt vector, the driver sends a In order to determine the card's interrupt vector, the driver sends a
.Dv NUL .Dv NUL
to each port. This may confuse things attached to them. to each port.
This may confuse things attached to them.
.Pp .Pp
The driver has so far only been tested on a The driver has so far only been tested on a
.Tn DLV-11J . .Tn DLV-11J .

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dmf.4,v 1.13 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: dmf.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -68,7 +68,8 @@ bit number
.Ar i .Ar i
is not properly is not properly
connected, and should be treated as hard-wired with carrier connected, and should be treated as hard-wired with carrier
always present. Thus specifying always present.
Thus specifying
.Ql flags 0x04 .Ql flags 0x04
for for
.Li dmf0 .Li dmf0
@ -126,10 +127,12 @@ driver.
No response from No response from
.Tn UNIBUS .Tn UNIBUS
on a DMA transfer on a DMA transfer
within a timeout period. This is often followed by a within a timeout period.
This is often followed by a
.Tn UNIBUS .Tn UNIBUS
adapter adapter
error. This occurs most frequently when the error.
This occurs most frequently when the
.Tn UNIBUS .Tn UNIBUS
is heavily loaded is heavily loaded
and when devices which hog the bus (such as and when devices which hog the bus (such as
@ -139,8 +142,8 @@ It is not serious.
.Pp .Pp
.It dmf%d: silo overflow. .It dmf%d: silo overflow.
The character input silo overflowed The character input silo overflowed
before it could be serviced. This can happen if a hard error occurs before it could be serviced.
when the This can happen if a hard error occurs when the
.Tn CPU .Tn CPU
is running with elevated priority, as the system will is running with elevated priority, as the system will
then print a message on the console with interrupts disabled. then print a message on the console with interrupts disabled.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dmz.4,v 1.12 2012/03/22 07:58:18 wiz Exp $ .\" $NetBSD: dmz.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -60,7 +60,8 @@ bit number
.Ar i .Ar i
is not properly is not properly
connected, and should be treated as hard-wired with carrier connected, and should be treated as hard-wired with carrier
always present. Thus specifying always present.
Thus specifying
.Ql flags 0x000004 .Ql flags 0x000004
for for
.Li dmz0 .Li dmz0
@ -104,10 +105,12 @@ No response from the
on a on a
.Tn DMA .Tn DMA
transfer transfer
within a timeout period. This is often followed by a within a timeout period.
This is often followed by a
.Tn UNIBUS .Tn UNIBUS
adapter adapter
error. This occurs most frequently when the error.
This occurs most frequently when the
.Tn UNIBUS .Tn UNIBUS
is heavily loaded is heavily loaded
and when devices which hog the bus (such as and when devices which hog the bus (such as
@ -117,8 +120,8 @@ It is not serious.
.Pp .Pp
.It dmz%d: silo overflow. .It dmz%d: silo overflow.
The character input silo overflowed The character input silo overflowed
before it could be serviced. This can happen if a hard error occurs before it could be serviced.
when the This can happen if a hard error occurs when the
.Tn CPU .Tn CPU
is running with elevated priority, as the system will is running with elevated priority, as the system will
then print a message on the console with interrupts disabled. then print a message on the console with interrupts disabled.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dn.4,v 1.12 2017/07/03 21:30:59 wiz Exp $ .\" $NetBSD: dn.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -55,7 +55,8 @@ such as the Able Quadracall) to an auto-call unit
To place an outgoing call one forks a sub-process which To place an outgoing call one forks a sub-process which
opens the appropriate call unit file, opens the appropriate call unit file,
.Pa /dev/cua? .Pa /dev/cua?
and writes the phone number on it. The parent process and writes the phone number on it.
The parent process
then opens the corresponding modem line then opens the corresponding modem line
.Pa /dev/cul? . .Pa /dev/cul? .
When the connection has been When the connection has been

View File

@ -1,4 +1,4 @@
.\" $NetBSD: dz.4,v 1.8 2003/08/07 10:31:11 agc Exp $ .\" $NetBSD: dz.4,v 1.9 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -56,7 +56,8 @@ bit number
.Ar i .Ar i
is not properly is not properly
connected, and should be treated as hard-wired with carrier connected, and should be treated as hard-wired with carrier
always present. Thus specifying always present.
Thus specifying
.Ql flags 0x04 .Ql flags 0x04
for for
.Li dz0 .Li dz0
@ -96,7 +97,8 @@ dialups
.Bl -diag .Bl -diag
.It dz%d: silo overflow . .It dz%d: silo overflow .
The 64 character input silo overflowed The 64 character input silo overflowed
before it could be serviced. This can happen if a hard error occurs before it could be serviced.
This can happen if a hard error occurs
when the when the
.Tn CPU .Tn CPU
is running with elevated priority, as the system will is running with elevated priority, as the system will

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ec.4,v 1.13 2003/08/07 10:31:11 agc Exp $ .\" $NetBSD: ec.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -84,11 +84,12 @@ flag with an
.Xr ioctl 2 . .Xr ioctl 2 .
.Pp .Pp
The interface software implements an exponential backoff algorithm The interface software implements an exponential backoff algorithm
when notified of a collision on the cable. This algorithm uses when notified of a collision on the cable.
a 16-bit mask and the This algorithm uses a 16-bit mask and the
.Tn VAX-11 Ns 's .Tn VAX-11 Ns 's
interval timer in calculating a series interval timer in calculating a series
of random backoff values. The algorithm is as follows: of random backoff values.
The algorithm is as follows:
.Bl -enum -offset indent .Bl -enum -offset indent
.It .It
Initialize the mask to be all 1's. Initialize the mask to be all 1's.
@ -133,9 +134,11 @@ The
driver appeared in driver appeared in
.Bx 4.2 . .Bx 4.2 .
.Sh BUGS .Sh BUGS
The hardware is not capable of talking to itself. The software The hardware is not capable of talking to itself.
implements local sending and broadcast by sending such packets to the The software implements local sending and broadcast by sending such
loop interface. This is a kludge. packets to the loop interface.
This is a kludge.
.Pp .Pp
Backoff delays are done in a software busy loop. This can degrade the Backoff delays are done in a software busy loop.
This can degrade the
system if the network experiences frequent collisions. system if the network experiences frequent collisions.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: en.4,v 1.12 2003/08/07 10:31:11 agc Exp $ .\" $NetBSD: en.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -65,11 +65,12 @@ No packets will be sent or accepted until
a network address is supplied. a network address is supplied.
.Pp .Pp
The interface software implements an exponential backoff algorithm The interface software implements an exponential backoff algorithm
when notified of a collision on the cable. This algorithm uses when notified of a collision on the cable.
a 16-bit mask and the This algorithm uses a 16-bit mask and the
.Tn VAX-11 Ns 's .Tn VAX-11 Ns 's
interval timer in calculating a series interval timer in calculating a series
of random backoff values. The algorithm is as follows: of random backoff values.
The algorithm is as follows:
.Pp .Pp
.Bl -enum -offset indent .Bl -enum -offset indent
.It .It
@ -131,14 +132,15 @@ driver appeared in
.Bx 4.2 . .Bx 4.2 .
.Sh BUGS .Sh BUGS
The device has insufficient buffering to handle back to The device has insufficient buffering to handle back to
back packets. This makes use in a production environment back packets.
painful. This makes use in a production environment painful.
.Pp .Pp
The hardware does word at a time The hardware does word at a time
.Tn DMA .Tn DMA
without byte swapping. without byte swapping.
To compensate, byte swapping of user data must either be done To compensate, byte swapping of user data must either be done
by the user or by the system. A kludge to byte swap only by the user or by the system.
A kludge to byte swap only
.Tn IP .Tn IP
packets is provided if the packets is provided if the
.Dv ENF_SWABIPS .Dv ENF_SWABIPS

View File

@ -1,4 +1,4 @@
.\" $NetBSD: hdh.4,v 1.11 2003/08/07 10:31:11 agc Exp $ .\" $NetBSD: hdh.4,v 1.12 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -64,7 +64,8 @@ interface to an
It is normally used when participating It is normally used when participating
in the in the
.Tn DARPA .Tn DARPA
Internet. The controller itself is not accessible Internet.
The controller itself is not accessible
to users, but instead provides the hardware support to the to users, but instead provides the hardware support to the
.Tn IMP .Tn IMP
interface described in interface described in
@ -79,7 +80,8 @@ as shown above in the
.Bl -diag .Bl -diag
.It hdh%d: not alive. .It hdh%d: not alive.
The initialization routine was entered even though the device The initialization routine was entered even though the device
did not autoconfigure. This indicates a system problem. did not autoconfigure.
This indicates a system problem.
.Pp .Pp
.It hdh%d: cannot get chan %d uba resources. .It hdh%d: cannot get chan %d uba resources.
Insufficient Insufficient

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ht.4,v 1.12 2017/02/18 22:39:01 wiz Exp $ .\" $NetBSD: ht.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -91,7 +91,8 @@ A tape error occurred
at block at block
.Em bn ; .Em bn ;
the ht error register and drive status register are the ht error register and drive status register are
printed in octal with the bits symbolically decoded. Any error is printed in octal with the bits symbolically decoded.
Any error is
fatal on non-raw tape; when possible the driver will have retried fatal on non-raw tape; when possible the driver will have retried
the operation which failed several times before reporting the error. the operation which failed several times before reporting the error.
.El .El

View File

@ -1,4 +1,4 @@
.\" $NetBSD: hy.4,v 1.12 2017/07/03 21:30:59 wiz Exp $ .\" $NetBSD: hy.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -52,7 +52,8 @@ is specified at boot time with an
.Dv SIOCSIFADDR .Dv SIOCSIFADDR
.Xr ioctl 2 . .Xr ioctl 2 .
The host's address is discovered by reading the adapter status The host's address is discovered by reading the adapter status
register. The interface will not transmit or receive register.
The interface will not transmit or receive
packets until the network number is known. packets until the network number is known.
.Sh DIAGNOSTICS .Sh DIAGNOSTICS
.Bl -diag .Bl -diag
@ -67,7 +68,8 @@ family; the packet was dropped.
.It hy%d: can't initialize. .It hy%d: can't initialize.
The interface was unable to allocate The interface was unable to allocate
.Tn UNIBUS .Tn UNIBUS
resources. This resources.
This
is usually due to having too many network devices on an 11/750 is usually due to having too many network devices on an 11/750
where there are only 3 buffered data paths. where there are only 3 buffered data paths.
.Pp .Pp

View File

@ -1,4 +1,4 @@
.\" $NetBSD: intro.4,v 1.16 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: intro.4,v 1.17 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -59,7 +59,8 @@ for more information.
This section describes the hardware supported on the This section describes the hardware supported on the
.Tn DEC .Tn DEC
.Tn VAX-11 . .Tn VAX-11 .
Software support for these devices comes in two forms. A hardware Software support for these devices comes in two forms.
A hardware
device may be supported with a character or block device may be supported with a character or block
.Em device driver , .Em device driver ,
or it may be used within the networking subsystem and have a or it may be used within the networking subsystem and have a
@ -75,7 +76,8 @@ communication facilities provided by the system; see
.Pp .Pp
A hardware device is identified to the system at configuration time A hardware device is identified to the system at configuration time
and the appropriate device or network interface driver is then compiled and the appropriate device or network interface driver is then compiled
into the system. When the resultant system is booted, the into the system.
When the resultant system is booted, the
autoconfiguration facilities in the system probe for the device autoconfiguration facilities in the system probe for the device
on either the on either the
.Tn UNIBUS .Tn UNIBUS
@ -84,14 +86,16 @@ on either the
or or
.Tn MASSBUS .Tn MASSBUS
and, if found, enable the software and, if found, enable the software
support for it. If a support for it.
If a
.Tn UNIBUS .Tn UNIBUS
device does not respond at autoconfiguration device does not respond at autoconfiguration
time it is not accessible at any time afterwards. To time it is not accessible at any time afterwards.
enable a To enable a
.Tn UNIBUS .Tn UNIBUS
device which did not autoconfigure, the system will have to device which did not autoconfigure, the system will have to
be rebooted. If a be rebooted.
If a
.Tn MASSBUS .Tn MASSBUS
device comes device comes
.Dq on-line .Dq on-line
@ -112,7 +116,8 @@ A list of the supported devices is given below.
.Re .Re
.Sh LIST OF DEVICES .Sh LIST OF DEVICES
The devices listed below are supported in this incarnation of The devices listed below are supported in this incarnation of
the system. Pseudo-devices are not listed. the system.
Pseudo-devices are not listed.
Devices are indicated by their functional interface. Devices are indicated by their functional interface.
If second vendor products provide functionally identical interfaces If second vendor products provide functionally identical interfaces
they should be usable with the supplied software. they should be usable with the supplied software.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ix.4,v 1.18 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: ix.4,v 1.19 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1986, 1991, 1993 .\" Copyright (c) 1986, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -100,7 +100,8 @@ The interface was unable to obtain UNIBUS resources required for operation.
.Pp .Pp
.It ix%d: failed to reinitialize DLA module. .It ix%d: failed to reinitialize DLA module.
The interface got sick after attempting to reprogram its physical The interface got sick after attempting to reprogram its physical
Ethernet address. Try reloading the firmware. Ethernet address.
Try reloading the firmware.
The attempt is made only when this interfaces is not the first The attempt is made only when this interfaces is not the first
one configured for one configured for
.Tn XNS . .Tn XNS .

View File

@ -1,4 +1,4 @@
.\" $NetBSD: kg.4,v 1.13 2005/06/20 13:25:25 peter Exp $ .\" $NetBSD: kg.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -50,14 +50,16 @@ or
.Tn DL-11W .Tn DL-11W
can be used as an alternative real can be used as an alternative real
time clock time clock
source. When configured, certain system source.
When configured, certain system
statistics and, optionally, system profiling work statistics and, optionally, system profiling work
will be collected each time the clock interrupts. For will be collected each time the clock interrupts.
optimum accuracy in profiling, the For optimum accuracy in profiling, the
.Tn DL-11W .Tn DL-11W
should be should be
configured to interrupt at the highest possible priority configured to interrupt at the highest possible priority
level. The level.
The
.Nm kg .Nm kg
device driver automatically calibrates itself to the device driver automatically calibrates itself to the
line clock frequency. line clock frequency.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: mt.4,v 1.13 2017/05/19 13:49:25 abhinav Exp $ .\" $NetBSD: mt.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -76,7 +76,8 @@ A tape error occurred
at block at block
.Em bn ; .Em bn ;
the mt error register and drive status register are the mt error register and drive status register are
printed in octal with the bits symbolically decoded. Any error is printed in octal with the bits symbolically decoded.
Any error is
fatal on non-raw tape; when possible the driver will have retried fatal on non-raw tape; when possible the driver will have retried
the operation which failed several times before reporting the error. the operation which failed several times before reporting the error.
.Pp .Pp
@ -85,8 +86,8 @@ An attempt was made to read a blank tape (a tape without even
end-of-file marks). end-of-file marks).
.Pp .Pp
.It mu%d: offline. .It mu%d: offline.
During an i/o operation the device was set offline. If a During an i/o operation the device was set offline.
non-raw tape was used in the access it is closed. If a non-raw tape was used in the access it is closed.
.El .El
.Sh SEE ALSO .Sh SEE ALSO
.Xr tar 1 , .Xr tar 1 ,

View File

@ -1,4 +1,4 @@
.\" $NetBSD: pcl.4,v 1.14 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: pcl.4,v 1.15 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -95,8 +95,8 @@ An interrupt occurred when no output had previously been started.
The The
.Tn TDM .Tn TDM
bus had no station providing ``bus master'' timing signals, bus had no station providing ``bus master'' timing signals,
so this interface has assumed the ``master'' role. This message should so this interface has assumed the ``master'' role.
only appear at most once per This message should only appear at most once per
.Tn UNIBUS INIT .Tn UNIBUS INIT
on a single system. on a single system.
Unless there is a hardware failure, only one station may be master at a time. Unless there is a hardware failure, only one station may be master at a time.
@ -107,7 +107,8 @@ If a ``receiver offline'' error is detected, it is not normally logged
unless the option unless the option
.Dv PCL_TESTING .Dv PCL_TESTING
has been selected, as this causes a lot has been selected, as this causes a lot
of console chatter when sending to a down machine. However, this option of console chatter when sending to a down machine.
However, this option
is quite useful when debugging problems with the is quite useful when debugging problems with the
.Tn PCL .Tn PCL
interfaces. interfaces.

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ps.4,v 1.10 2003/08/07 10:31:13 agc Exp $ .\" $NetBSD: ps.4,v 1.11 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -57,8 +57,8 @@ with no system call overhead.
.Tn DMA .Tn DMA
to and from the to and from the
.Tn PS2 .Tn PS2
is not supported. All read and write is not supported.
system calls will fail. All read and write system calls will fail.
All data is moved to and from the All data is moved to and from the
.Tn PS2 .Tn PS2
via programmed via programmed
@ -107,7 +107,8 @@ The second argument is the length of each double buffer.
The refresh mechanism displays the current double buffer, in addition The refresh mechanism displays the current double buffer, in addition
to its static refresh lists, when in double buffer mode. to its static refresh lists, when in double buffer mode.
.It Dv PSIOSINGLEREFRESH .It Dv PSIOSINGLEREFRESH
Single step the refresh process. That is, the driver does not continually Single step the refresh process.
That is, the driver does not continually
refresh the screen. refresh the screen.
.It Dv PSIOSINGLEMAP .It Dv PSIOSINGLEMAP
Single step the matrix process. Single step the matrix process.
@ -116,7 +117,8 @@ The driver does not automatically feed display files through the matrix unit.
Turn off double buffering. Turn off double buffering.
.It Dv PSIOTIMEREFRESH .It Dv PSIOTIMEREFRESH
The argument is a count of the number of refresh interrupts to take The argument is a count of the number of refresh interrupts to take
before turning off the screen. This is used to do time exposures. before turning off the screen.
This is used to do time exposures.
.It Dv PSIOWAITREFRESH .It Dv PSIOWAITREFRESH
Suspend the user process until a refresh interrupt has occurred. Suspend the user process until a refresh interrupt has occurred.
If in If in

View File

@ -1,4 +1,4 @@
.\" $NetBSD: tm.4,v 1.13 2017/02/18 22:39:01 wiz Exp $ .\" $NetBSD: tm.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -81,15 +81,17 @@ A tape error occurred
at block at block
.Em bn ; .Em bn ;
the tm error register is the tm error register is
printed in octal with the bits symbolically decoded. Any error is printed in octal with the bits symbolically decoded.
Any error is
fatal on non-raw tape; when possible the driver will have retried fatal on non-raw tape; when possible the driver will have retried
the operation which failed several times before reporting the error. the operation which failed several times before reporting the error.
.Pp .Pp
.It te%d: lost interrupt. .It te%d: lost interrupt.
A tape operation did not complete A tape operation did not complete
within a reasonable time, most likely because the tape was taken within a reasonable time, most likely because the tape was taken
off-line during rewind or lost vacuum. The controller should, but does not, off-line during rewind or lost vacuum.
give an interrupt in these cases. The device will be made available The controller should, but does not, give an interrupt in these cases.
The device will be made available
again after this message, but any current open reference to the device again after this message, but any current open reference to the device
will return an error as the operation in progress aborts. will return an error as the operation in progress aborts.
.El .El

View File

@ -1,4 +1,4 @@
.\" $NetBSD: ut.4,v 1.11 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: ut.4,v 1.12 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -55,8 +55,8 @@ Hardware implementing this on the
is typified by the System is typified by the System
Industries Industries
.Tn SI .Tn SI
9700 tape subsystem. Tapes may be read or written 9700 tape subsystem.
at 800, 1600, and 6250 Tapes may be read or written at 800, 1600, and 6250
.Tn BPI . .Tn BPI .
.Sh DIAGNOSTICS .Sh DIAGNOSTICS
.Bl -diag .Bl -diag
@ -78,7 +78,8 @@ the density.
.Pp .Pp
.It "ut%d: soft error bn%d cs1=%b er=%b cs2=%b ds=%b." .It "ut%d: soft error bn%d cs1=%b er=%b cs2=%b ds=%b."
The formatter indicated a corrected error at a density other The formatter indicated a corrected error at a density other
than 800bpi. The data transferred is assumed to be correct. than 800bpi.
The data transferred is assumed to be correct.
.Pp .Pp
.It "ut%d: hard error bn%d cs1=%b er=%b cs2=%b ds=%b." .It "ut%d: hard error bn%d cs1=%b er=%b cs2=%b ds=%b."
A tape error occurred A tape error occurred
@ -92,8 +93,9 @@ the operation which failed several times before reporting the error.
.It tj%d: lost interrupt. .It tj%d: lost interrupt.
A tape operation did not complete A tape operation did not complete
within a reasonable time, most likely because the tape was taken within a reasonable time, most likely because the tape was taken
off-line during rewind or lost vacuum. The controller should, but does not, off-line during rewind or lost vacuum.
give an interrupt in these cases. The device will be made available The controller should, but does not, give an interrupt in these cases.
The device will be made available
again after this message, but any current open reference to the device again after this message, but any current open reference to the device
will return an error as the operation in progress aborts. will return an error as the operation in progress aborts.
.El .El

View File

@ -1,4 +1,4 @@
.\" $NetBSD: uu.4,v 1.13 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: uu.4,v 1.14 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -102,13 +102,13 @@ in the configuration file.
.It uu%d: no bp, active %d. .It uu%d: no bp, active %d.
A transmission complete interrupt was received with no outstanding A transmission complete interrupt was received with no outstanding
.Tn I/O .Tn I/O
request. This indicates a hardware problem. request.
This indicates a hardware problem.
.Pp .Pp
.It uu%d protocol error, state=%s, op=%x, cnt=%d, block=%d. .It uu%d protocol error, state=%s, op=%x, cnt=%d, block=%d.
The driver entered an illegal state. The information printed The driver entered an illegal state.
indicates the illegal state, the The information printed indicates the illegal state, the operation
operation currently being executed, currently being executed, the
the
.Tn I/O .Tn I/O
count, and the block number on the cassette. count, and the block number on the cassette.
.Pp .Pp
@ -116,12 +116,14 @@ count, and the block number on the cassette.
The The
.Tn TU-58 .Tn TU-58
was sending a continuous break signal and had was sending a continuous break signal and had
to be reset. This may indicate a hardware problem, but to be reset.
This may indicate a hardware problem, but
the driver will attempt to recover from the error. the driver will attempt to recover from the error.
.Pp .Pp
.It uu%d receive state error, state=%s, byte=%x. .It uu%d receive state error, state=%s, byte=%x.
The driver entered an illegal state in the receiver finite The driver entered an illegal state in the receiver finite
state machine. The state is shown along with the control state machine.
The state is shown along with the control
byte of the received packet. byte of the received packet.
.Pp .Pp
.It uu%d: read stalled. .It uu%d: read stalled.
@ -131,9 +133,9 @@ This usually indicates that one or more receiver interrupts
were lost and the transfer is restarted. were lost and the transfer is restarted.
.Pp .Pp
.It uu%d: hard error bn%d, pk_mod %o. .It uu%d: hard error bn%d, pk_mod %o.
The device returned a status code indicating a hard error. The The device returned a status code indicating a hard error.
actual error code is shown in octal. No retries are attempted The actual error code is shown in octal.
by the driver. No retries are attempted by the driver.
.El .El
.Sh ERRORS .Sh ERRORS
The following errors may be returned: The following errors may be returned:

View File

@ -1,4 +1,4 @@
.\" $NetBSD: va.4,v 1.14 2017/07/31 18:45:43 ryoon Exp $ .\" $NetBSD: va.4,v 1.15 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1980, 1991, 1993 .\" Copyright (c) 1980, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -146,7 +146,8 @@ The device was not able to get data from
the the
.Tn UNIBUS .Tn UNIBUS
within the timeout period, most likely because some other within the timeout period, most likely because some other
device was hogging the bus. (But see device was hogging the bus.
(But see
.Sx BUGS .Sx BUGS
below). below).
.El .El

View File

@ -1,4 +1,4 @@
.\" $NetBSD: vv.4,v 1.12 2004/10/04 19:12:52 rumble Exp $ .\" $NetBSD: vv.4,v 1.13 2017/08/01 11:04:21 wiz Exp $
.\" .\"
.\" Copyright (c) 1983, 1991, 1993 .\" Copyright (c) 1983, 1991, 1993
.\" The Regents of the University of California. All rights reserved. .\" The Regents of the University of California. All rights reserved.
@ -114,8 +114,8 @@ family; the packet was dropped.
.Pp .Pp
.It vv%d: vs_olen=%d. .It vv%d: vs_olen=%d.
The ring output routine has been The ring output routine has been
handed a message with a preposterous length. This results in handed a message with a preposterous length.
an immediate This results in an immediate
.Em panic: vs_olen . .Em panic: vs_olen .
.El .El
.Sh SEE ALSO .Sh SEE ALSO