enable tun support.

This commit is contained in:
chopps 1995-03-02 03:30:14 +00:00
parent d9561ae69c
commit 02437f14e8
5 changed files with 194 additions and 65 deletions

View File

@ -1,60 +0,0 @@
# $NetBSD: BURBCLAVE,v 1.2 1994/10/26 02:02:24 cgd Exp $
include "std.amiga"
maxusers 8
options TIMEZONE=300, DST=1
options "M68040", "M68030", "M68020", FPSP, FPCOPROC
options SWAPPAGER, VNODEPAGER, DEVPAGER
options INET
options FFS, MFS, FDESC, ADOSFS
options "COMPAT_09", "COMPAT_43"
options COMPAT_SUNOS, "TCP_COMPAT_42", "COMPAT_NOMID"
options GENERIC, KTRACE, DIAGNOSTIC, "NKMEMCLUSTERS=256"
options PANICWAIT, DEBUG, DDB
options GRF_ECS, GRF_NTSC, GRF_PAL, "GRF_A2024"
#options "CD9660", PORTAL, MSDOSFS, PROCFS, NULLFS, FIFO, KERNFS
#options NFSSERVER, NFSCLIENT
#options SYSVSHM, SYSVMSG, SYSVSEM
#options SYSCALL_DEBUG, SCSIDEBUG, KGDB
grfcc0 at mainbus0 # custom chips
grf0 at grfcc0
grfrt0 at ztwobus0 # retina II
grf1 at grfrt0
ite* at grf?
# scsi stuff, all possible
gvpbus0 at ztwobus0
gtsc0 at gvpbus0
scsibus0 at gtsc0
#
# compat.
#
sd0 at scsibus? target 0 lun 0
sd1 at scsibus? target 1 lun 0
sd2 at scsibus? target 2 lun 0
sd3 at scsibus? target 3 lun 0
sd4 at scsibus? target 4 lun 0
sd5 at scsibus? target 5 lun 0
sd6 at scsibus? target 6 lun 0
#
# This is nicer however many amiga setups expect sd units to refer to
# scsi target numbers. If this is not the case, you can remove the
# specific sdx lines above and each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cd's
pseudo-device sl # slip
pseudo-device ppp # ppp
pseudo-device view 2 # views
pseudo-device pty 16 # pseudo terminals
pseudo-device loop # network loopback
config netbsd swap on generic

187
sys/arch/amiga/conf/COFFEE Normal file
View File

@ -0,0 +1,187 @@
# $NetBSD: COFFEE,v 1.1 1995/03/02 03:30:26 chopps Exp $
#
# COFFEE - GENERIC but with GATEWAY
#
# This configuration file contains all possible options
#
include "std.amiga"
maxusers 8
options TIMEZONE=300, DST=1
#
# processors this kernel should support
#
options "M68040" # support for 040
options FPSP # MC68040 floating point support
options "M68030" # support for 030
options "M68020" # support for 020/851
options FPCOPROC # Support for MC6888[12] (Required)
options SWAPPAGER # Pager for processes (Required)
options VNODEPAGER # Pager for vnodes (Required)
options DEVPAGER # Pager for devices (Required)
#
# Networking options
#
options INET # IP networking support (Required)
#options ISO # ISO Networking support
#options TPIP # ARGO TP networking support
#options CCITT # CCITT X.25
#options NS # Xerox XNS
#options EON # ISO CLNL over IP
options GATEWAY # Packet forwarding
#options DIRECTED_BROADCAST # Broadcast across subnets
#options NSIP # XNS over IP
#
# File system related options
#
options QUOTA # Disk quotas for local disks
options NFSSERVER # Network File System server side code
options NFSCLIENT # Network File System client side code
#
# File systems
#
options FFS # Berkeley fast file system
options MFS # Memory based filesystem
options PROCFS # Process filesystem
options KERNFS # Kernel parameter filesystem (Recommended)
options FDESC # /dev/fd filesystem
options NULLFS # Loopback filesystem
options FIFO # FIFO operations on vnodes (Recommended)
options ADOSFS # AmigaDOS file system
options "CD9660" # ISO 9660 file system, with Rock Ridge
#options PORTAL # Portal filesystem
#options MSDOSFS # MS-DOS filesystem
#
# Compatability options for various existing systems
#
options "COMPAT_10" # compatability with older NetBSD release
options "COMPAT_09" # compatability with older NetBSD release
options "COMPAT_43" # 4.3 BSD compatible system calls
options COMPAT_SUNOS # Support to run Sun (m68k) executables
options "TCP_COMPAT_42" # Use 4.2 BSD style TCP
options "COMPAT_NOMID" # allow nonvalid machine id executables
#options COMPAT_HPUX # HP300 compatability
#
# Support for System V IPC facilities.
#
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
#
# Support for various kernel options
#
options GENERIC # Mini-root boot support
options LKM # Loadable kernel modules
options KTRACE # Add kernel tracing system call
options DIAGNOSTIC # Add additional error checking code
options "NKMEMCLUSTERS=256" # Size of kernel malloc area
#
# Misc. debuging options
#
options PANICWAIT # Require keystroke to dump/reboot
options DEBUG # Add debugging statements
options DDB # Kernel debugger
#options SYSCALL_DEBUG # debug all syscalls.
#options SCSIDEBUG # Add SCSI debugging statements
#options KGDB # Kernel debugger (KGDB) support
#options PANICBUTTON # Forced crash via keypress (???)
#
# Amiga specific options
#
options MACHINE_NONCONTIG # Non-contiguous memory support
options RETINACONSOLE # enable code to allow retina to be console
options GRF_ECS # Enhanced Chip Set
options GRF_NTSC # NTSC
options GRF_PAL # PAL
options "GRF_A2024" # Support for the A2024
options GRF_AGA # AGA Chip Set
#options GRF_CL5426 # Cirrus board support (not yet)
#options "KFONT_8X11" # 8x11 font
grfcc0 at mainbus0 # custom chips
grfrt0 at zbus0 # retina II
grfrh0 at zbus0 # retina III
#grfcl0 at zbus0 # Picasso II/Piccalo/Spectrum
grf0 at grfcc0
grf1 at grfrt0
grf2 at grfrh0
#grf3 at grfcl0
ite0 at grf0 # terminal emulators for grf's
ite1 at grf1 # terminal emulators for grf's
ite2 at grf2 # terminal emulators for grf's
#ite3 at grf3 # terminal emulators for grf's
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
le0 at zbus0 # Lance ethernet.
ed0 at zbus0 # dp8390 ethernet
es0 at zbus0 # SMC 91C90 ethernet
# scsi stuff, all possible
gvpbus0 at zbus0
gtsc0 at gvpbus0 # GVP series II scsi
ahsc0 at mainbus0 # A3000 scsi
atzsc0 at zbus0
wstsc0 at zbus0 # Wordsync II scsi
ivsc0 at zbus0 # IVS scsi
mlhsc0 at zbus0 # Hacker scsi
otgsc0 at zbus0 # 12 gauge scsi
zssc0 at zbus0 # Zeus scsi
mgnsc0 at zbus0 # Magnum scsi
wesc0 at zbus0 # Warp Engine scsi
idesc0 at mainbus0 # A4000 & A1200 IDE
afsc0 at zbus0 # A4091 scsi
#flz3sc0 at zbus0 # FastlaneZ3 scsi
scsibus* at gtsc0
scsibus* at ahsc0
scsibus* at atzsc0
scsibus* at wstsc0
scsibus* at ivsc0
scsibus* at mlhsc0
scsibus* at otgsc0
scsibus* at zssc0
scsibus* at mgnsc0
scsibus* at wesc0
scsibus* at idesc0
scsibus* at afsc0
#scsibus* at flz3sc0
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cd's
pseudo-device sl # slip
pseudo-device ppp # ppp
pseudo-device view 10 # views
pseudo-device pty 16 # pseudo terminals
pseudo-device loop # network loopback
pseudo-device bpfilter 2 # berkeley packet filters
pseudo-device tun 2
config netbsd swap on generic

View File

@ -1,4 +1,4 @@
# $NetBSD: GENERIC,v 1.32 1995/02/12 19:18:56 chopps Exp $
# $NetBSD: GENERIC,v 1.33 1995/03/02 03:30:43 chopps Exp $
#
# GENERIC AMIGA
@ -181,5 +181,7 @@ pseudo-device ppp # ppp
pseudo-device view 10 # views
pseudo-device pty 16 # pseudo terminals
pseudo-device loop # network loopback
#pseudo-device bpfilter 2 # berkeley packet filters
#pseudo-device tun 2
config netbsd swap on generic

View File

@ -1,4 +1,4 @@
# $NetBSD: files.amiga,v 1.18 1995/02/28 22:06:05 chopps Exp $
# $NetBSD: files.amiga,v 1.19 1995/03/02 03:30:55 chopps Exp $
# maxpartitions must be first item in files.${ARCH}.newconf
maxpartitions 16 # NOTE THAT AMIGA IS SPECIAL!
@ -90,7 +90,7 @@ device ed at zbus: ifnet, ether
file arch/amiga/dev/if_ed.c ed needs-flag
# C=/Ameristar A2060 / 560
device bah at ztwobus: ifnet, arc
device bah at zbus: ifnet, arc
file arch/amiga/dev/if_bah.c bah needs-flag
device es at zbus: ifnet, ether

View File

@ -1,4 +1,4 @@
# $NetBSD: files.amiga.newconf,v 1.18 1995/02/28 22:06:05 chopps Exp $
# $NetBSD: files.amiga.newconf,v 1.19 1995/03/02 03:30:55 chopps Exp $
# maxpartitions must be first item in files.${ARCH}.newconf
maxpartitions 16 # NOTE THAT AMIGA IS SPECIAL!
@ -90,7 +90,7 @@ device ed at zbus: ifnet, ether
file arch/amiga/dev/if_ed.c ed needs-flag
# C=/Ameristar A2060 / 560
device bah at ztwobus: ifnet, arc
device bah at zbus: ifnet, arc
file arch/amiga/dev/if_bah.c bah needs-flag
device es at zbus: ifnet, ether