Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/dev/acpi/files.acpi

83 lines
2.0 KiB
Plaintext
Raw Normal View History

Rework the configuration scheme for PCI fixups: * bus enumeration fixups are not PCIBIOS-specific, interrupt fixups are done by both PCIBIOS and ACPI. The redundancy is very redundant. Therefore, rename PCIBIOS_*_FIXUP to PCI_*_FIXUP, use PCI_INTR_FIXUP in place of ACPI_PCI_FIXUP, and change code refences to match. * move the fixup defines from opt_pcibios.h to opt_pcifixup.h to reflect the above. * fix up the PCI bus numbering in mainbus_attach(), right after we detect the configuration mode. This probably renders the fixup in pcibios.c redundant -- but it should be harmless. These changes make cardbus work in ACPI-only machines, when PCI_BUS_FIXUP and PCI_INTR_FIXUP are defined.
2005-06-21 12:19:25 +04:00
# $NetBSD: files.acpi,v 1.32 2005/06/21 08:19:25 sekiya Exp $
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
include "dev/acpi/acpica/files.acpica"
Rework the configuration scheme for PCI fixups: * bus enumeration fixups are not PCIBIOS-specific, interrupt fixups are done by both PCIBIOS and ACPI. The redundancy is very redundant. Therefore, rename PCIBIOS_*_FIXUP to PCI_*_FIXUP, use PCI_INTR_FIXUP in place of ACPI_PCI_FIXUP, and change code refences to match. * move the fixup defines from opt_pcibios.h to opt_pcifixup.h to reflect the above. * fix up the PCI bus numbering in mainbus_attach(), right after we detect the configuration mode. This probably renders the fixup in pcibios.c redundant -- but it should be harmless. These changes make cardbus work in ACPI-only machines, when PCI_BUS_FIXUP and PCI_INTR_FIXUP are defined.
2005-06-21 12:19:25 +04:00
defflag opt_acpi.h ACPIVERBOSE ACPI_DEBUG ACPI_ACTIVATE_DEV ACPI_DISABLE_ON_POWEROFF
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
Use sysmon_taskq.
2003-04-21 00:21:29 +04:00
device acpi { }: sysmon_power, sysmon_taskq
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
attach acpi at acpibus
file dev/acpi/acpi.c acpi needs-flag
Build acpi_resource.c, add "acpiec" and "acpiacad".
2001-09-29 09:36:03 +04:00
file dev/acpi/acpi_resource.c acpi
ThermalZone improvement work by lha at stacken.kth.se, inspired from FreeBSD thermal zone code. Minor style fixes and bugfixes by me.
2004-05-26 21:15:17 +04:00
file dev/acpi/acpi_powerres.c acpi
don't compile acpi_madt.c unless options MPACPI is specified.
2004-05-27 15:26:33 +04:00
file dev/acpi/acpi_madt.c acpi & mpacpi
Add quirk handling to ACPI. First quirk entry is "PTLTD " rev 0x06040000, which gives problems with PCI bus finding; the object hierarchy doesn't match the real world for some systems, most notably SuperMicro boards. Linux has this one blacklisted as well.
2003-05-16 01:29:49 +04:00
file dev/acpi/acpi_quirks.c acpi
Build acpi_resource.c, add "acpiec" and "acpiacad".
2001-09-29 09:36:03 +04:00
# ACPI Embedded Controller
device acpiec
attach acpiec at acpi
Only call acpiec_early_attach() in "acpi.c" if the kernel is configured to include the "acpiec" device.
2004-03-31 15:19:39 +04:00
file dev/acpi/acpi_ec.c acpiec needs-flag
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
# ACPI Lid Switch
* Don't do the ACPI_PCI_FIXUP unless it is explicitly enabled in the kernel config file. That code makes a total mess of any system with multiple PCI busses. * Rework the way buttons are handled; register them with sysmon, and let it take the appropriate action. This lets us gracefully shut down when the power button is pressed.
2003-04-17 05:22:21 +04:00
device acpilid: sysmon_power
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
attach acpilid at acpi
file dev/acpi/acpi_lid.c acpilid
# ACPI Button
* Don't do the ACPI_PCI_FIXUP unless it is explicitly enabled in the kernel config file. That code makes a total mess of any system with multiple PCI busses. * Rework the way buttons are handled; register them with sysmon, and let it take the appropriate action. This lets us gracefully shut down when the power button is pressed.
2003-04-17 05:22:21 +04:00
device acpibut: sysmon_power
Add some basic ACPI probing framework. This is far from complete, it is merely a work in progress.
2001-09-28 06:09:22 +04:00
attach acpibut at acpi
file dev/acpi/acpi_button.c acpibut
# ACPI AC Adapter
Add sysmon pswitch hook so that powerd(8) can monitor AC adapter online/offline events.
2004-05-03 11:44:36 +04:00
device acpiacad: sysmon_envsys, sysmon_power
Build acpi_resource.c, add "acpiec" and "acpiacad".
2001-09-29 09:36:03 +04:00
attach acpiacad at acpi
file dev/acpi/acpi_acad.c acpiacad
Prototype ACPI Control Method Battery driver. ACPI defines two different battery device interfaces: "Control Method" batteries, in which AML methods are defined in order to get battery status and set battery alarm thresholds, and a "Smart Battery" device, which is an SMbus device accessed through the ACPI Embedded Controller device; this driver knows how to attach to the former sort of device. As a total kludge, since we haven't wired things up to sysmon/envsys yet, we report battery status through a once-per-minute kernel printf, so don't use this driver yet if you want your disk to spin down. Motivated by and tested on Sony PCG-R505TL laptop, which has nonfunctional APM. configure as: acpibat* at acpi ? Sample output: acpibat0 at acpi0: ACPI Battery acpibat0: Sony Corp. LION acpibat0: Design 38480mWh, Predicted 38480mWh Warn 120mWh Low 0mWh acpibat0: discharging: 15112mV cap 25480mWh (66%) rate 16849mW ... acpibat0: discharging: 15224mV cap 25070mWh (65%) rate 18405mW ... acpibat0: discharging: 15200mV cap 24310mWh (63%) rate 13771mW ... acpibat0: charging: 15768mV cap 23330mWh (60%) rate 20388mW
2002-03-24 06:46:10 +03:00
# ACPI Control Method Battery
add envsys support to acpi A/C adapter and batteries. This is still a work in progress, much like the rest of ACPI.
2002-12-31 08:26:56 +03:00
device acpibat: sysmon_envsys
Prototype ACPI Control Method Battery driver. ACPI defines two different battery device interfaces: "Control Method" batteries, in which AML methods are defined in order to get battery status and set battery alarm thresholds, and a "Smart Battery" device, which is an SMbus device accessed through the ACPI Embedded Controller device; this driver knows how to attach to the former sort of device. As a total kludge, since we haven't wired things up to sysmon/envsys yet, we report battery status through a once-per-minute kernel printf, so don't use this driver yet if you want your disk to spin down. Motivated by and tested on Sony PCG-R505TL laptop, which has nonfunctional APM. configure as: acpibat* at acpi ? Sample output: acpibat0 at acpi0: ACPI Battery acpibat0: Sony Corp. LION acpibat0: Design 38480mWh, Predicted 38480mWh Warn 120mWh Low 0mWh acpibat0: discharging: 15112mV cap 25480mWh (66%) rate 16849mW ... acpibat0: discharging: 15224mV cap 25070mWh (65%) rate 18405mW ... acpibat0: discharging: 15200mV cap 24310mWh (63%) rate 13771mW ... acpibat0: charging: 15768mV cap 23330mWh (60%) rate 20388mW
2002-03-24 06:46:10 +03:00
attach acpibat at acpi
file dev/acpi/acpi_bat.c acpibat
Add 'com at acpi' and 'wss at acpi' glue. These are both working great on my ThinkPad 600E. XXX isa_dmainit isn't called early enough for the 'audio at wss' attachment XXX to work, so I'm deferring the call to 'wssattach' until later on. This XXX should be fixed soon.
2002-12-28 09:20:15 +03:00
Initial support for ACPI Thermal Zones. For now, we only export the zone temperature to sysmon; in the near future we should be associating devices in this thermal zone with this device so we can do active or passive cooling on a zone-by-zone basis.
2003-01-04 08:36:03 +03:00
# ACPI Thermal Zone
device acpitz: sysmon_envsys
attach acpitz at acpi
file dev/acpi/acpi_tz.c acpitz
Add 'com at acpi' and 'wss at acpi' glue. These are both working great on my ThinkPad 600E. XXX isa_dmainit isn't called early enough for the 'audio at wss' attachment XXX to work, so I'm deferring the call to 'wssattach' until later on. This XXX should be fixed soon.
2002-12-28 09:20:15 +03:00
# Serial interface
attach com at acpi with com_acpi
file dev/acpi/com_acpi.c com_acpi
Add an fdc at acpi(4) attachment
2002-12-28 22:31:35 +03:00
# Floppy disk controller
attach fdc at acpi with fdc_acpi
file dev/acpi/fdc_acpi.c fdc_acpi
Add an lpt attachment to acpi(4)
2002-12-28 11:04:28 +03:00
# Parallel interface
attach lpt at acpi with lpt_acpi
add ACPI atppc(4) attachment; probes properly, DMA and actual transfer not tested yet
2004-01-25 14:46:49 +03:00
file dev/acpi/lpt_acpi.c lpt_acpi & !ppbus
add dependency on isadma for atppc attachments add atppc_isadma.c for atppc@isapnp and atppc@ofisa, too
2004-01-31 16:59:20 +03:00
attach atppc at acpi with atppc_acpi: isadma
add ACPI atppc(4) attachment; probes properly, DMA and actual transfer not tested yet
2004-01-25 14:46:49 +03:00
file dev/acpi/atppc_acpi.c atppc_acpi
Add an lpt attachment to acpi(4)
2002-12-28 11:04:28 +03:00
Add a pckbc acpi attachment (it compiles but it untested).
2002-12-28 11:45:31 +03:00
# Keyboard controller
attach pckbc at acpi with pckbc_acpi
file dev/acpi/pckbc_acpi.c pckbc_acpi
Add 'com at acpi' and 'wss at acpi' glue. These are both working great on my ThinkPad 600E. XXX isa_dmainit isn't called early enough for the 'audio at wss' attachment XXX to work, so I'm deferring the call to 'wssattach' until later on. This XXX should be fixed soon.
2002-12-28 09:20:15 +03:00
# NeoMagic 256AV audio with CS4232 codec
attach wss at acpi with wss_acpi
file dev/acpi/wss_acpi.c wss_acpi
Add ACPI mpu(4) attachment, based on lpt_acpi.c by jmcneill@, reviewed by christos@, cube@ and martin@. While here, remove a printf() in mpu_attach() (ic/mpu.c) to remove an empty line in some frontends (mpu_isa.c, etc).
2004-12-02 12:50:41 +03:00
# Roland MPU401 (compatible) MIDI UART
attach mpu at acpi with mpu_acpi
file dev/acpi/mpu_acpi.c mpu_acpi
Add ACPI joy(4) attachment, based on lpt_acpi.c by jmcneill@, reviewed and ok'ed by cube@ and martin@.
2004-12-02 17:33:31 +03:00
# Joystick/Game port
attach joy at acpi with joy_acpi
file dev/acpi/joy_acpi.c joy_acpi
Add pcppi(4) ACPI attachment, which matches the "AT-style speaker sound" ACPI device. Reviewed by christos@.
2005-03-21 17:06:46 +03:00
# AT-style speaker sound
attach pcppi at acpi with pcppi_acpi
file dev/acpi/pcppi_acpi.c pcppi_acpi
Add attimer(4) driver, with ISA and ACPI attachments. attimer(4) is the new body of the part of pcppi(4) that mapped the TIMER1 register to set the pitch of the bell. It was necessary to separate them in order to have a working ACPI attachment (as the two appear as different devices in the ACPI structures).
2005-03-26 02:06:19 +03:00
# AT Timer
attach attimer at acpi with attimer_acpi
file dev/acpi/attimer_acpi.c attimer_acpi