From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
/* $NetBSD: strings.c,v 1.15 2006/11/28 18:45:32 christos Exp $ */
|
1996-06-08 23:48:09 +04:00
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
1994-06-29 09:09:04 +04:00
|
|
|
* Copyright (c) 1980, 1993
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
1993-03-21 12:45:37 +03:00
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
2003-08-07 15:13:06 +04:00
|
|
|
* 3. Neither the name of the University nor the names of its contributors
|
1993-03-21 12:45:37 +03:00
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
* without specific prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
|
1997-10-19 09:02:57 +04:00
|
|
|
#include <sys/cdefs.h>
|
1993-03-21 12:45:37 +03:00
|
|
|
#ifndef lint
|
1996-06-08 23:48:09 +04:00
|
|
|
#if 0
|
|
|
|
static char sccsid[] = "@(#)strings.c 8.1 (Berkeley) 6/6/93";
|
|
|
|
#else
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
__RCSID("$NetBSD: strings.c,v 1.15 2006/11/28 18:45:32 christos Exp $");
|
1996-06-08 23:48:09 +04:00
|
|
|
#endif
|
1993-03-21 12:45:37 +03:00
|
|
|
#endif /* not lint */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Mail -- a mail program
|
|
|
|
*
|
|
|
|
* String allocation routines.
|
|
|
|
* Strings handed out here are reclaimed at the top of the command
|
|
|
|
* loop each time, so they need not be freed.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "rcv.h"
|
1994-06-29 09:09:04 +04:00
|
|
|
#include "extern.h"
|
1993-03-21 12:45:37 +03:00
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
#define STRINGSIZE ((unsigned) 128)/* Dynamic allocation units */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The pointers for the string allocation routines,
|
|
|
|
* there are NSPACE independent areas.
|
|
|
|
* The first holds STRINGSIZE bytes, the next
|
|
|
|
* twice as much, and so on.
|
|
|
|
*/
|
|
|
|
#define NSPACE 25 /* Total number of string spaces */
|
|
|
|
static struct strings {
|
|
|
|
char *s_topFree; /* Beginning of this area */
|
|
|
|
char *s_nextFree; /* Next alloctable place here */
|
|
|
|
unsigned s_nleft; /* Number of bytes left here */
|
|
|
|
} stringdope[NSPACE];
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
* Allocate size more bytes of space and return the address of the
|
|
|
|
* first byte to the caller. An even number of bytes are always
|
|
|
|
* allocated so that the space will always be on a word boundary.
|
|
|
|
* The string spaces are of exponentially increasing size, to satisfy
|
|
|
|
* the occasional user with enormous string size requests.
|
|
|
|
*/
|
|
|
|
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void *
|
2005-07-20 03:07:10 +04:00
|
|
|
salloc(size_t size)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
char *t;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
size_t s;
|
1997-10-19 09:02:57 +04:00
|
|
|
struct strings *sp;
|
2002-03-02 18:27:51 +03:00
|
|
|
int idx;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
s = size;
|
1995-04-24 11:39:42 +04:00
|
|
|
s += (sizeof (char *) - 1);
|
|
|
|
s &= ~(sizeof (char *) - 1);
|
2002-03-02 18:27:51 +03:00
|
|
|
idx = 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
for (sp = &stringdope[0]; sp < &stringdope[NSPACE]; sp++) {
|
2002-03-04 06:07:25 +03:00
|
|
|
if (sp->s_topFree == NULL && (STRINGSIZE << idx) >= s)
|
1993-03-21 12:45:37 +03:00
|
|
|
break;
|
|
|
|
if (sp->s_nleft >= s)
|
|
|
|
break;
|
2002-03-02 18:27:51 +03:00
|
|
|
idx++;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
if (sp >= &stringdope[NSPACE])
|
1997-10-19 09:02:57 +04:00
|
|
|
errx(1, "String too large");
|
2002-03-04 06:07:25 +03:00
|
|
|
if (sp->s_topFree == NULL) {
|
2002-03-02 18:27:51 +03:00
|
|
|
idx = sp - &stringdope[0];
|
|
|
|
sp->s_topFree = malloc(STRINGSIZE << idx);
|
2002-03-04 06:07:25 +03:00
|
|
|
if (sp->s_topFree == NULL)
|
2002-03-02 18:27:51 +03:00
|
|
|
errx(1, "No room for space %d", idx);
|
1993-03-21 12:45:37 +03:00
|
|
|
sp->s_nextFree = sp->s_topFree;
|
2002-03-02 18:27:51 +03:00
|
|
|
sp->s_nleft = STRINGSIZE << idx;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
sp->s_nleft -= s;
|
|
|
|
t = sp->s_nextFree;
|
|
|
|
sp->s_nextFree += s;
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
return t;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
|
2006-10-22 01:37:20 +04:00
|
|
|
/*
|
|
|
|
* Allocate zeroed space for 'number' elments of size 'size'.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void *
|
2006-10-22 01:37:20 +04:00
|
|
|
csalloc(size_t number, size_t size)
|
|
|
|
{
|
|
|
|
void *p;
|
|
|
|
p = salloc(number * size);
|
|
|
|
(void)memset(p, 0, number * size);
|
|
|
|
return p;
|
|
|
|
}
|
|
|
|
|
1993-03-21 12:45:37 +03:00
|
|
|
/*
|
|
|
|
* Reset the string area to be empty.
|
|
|
|
* Called to free all strings allocated
|
|
|
|
* since last reset.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void
|
2002-03-02 17:59:35 +03:00
|
|
|
sreset(void)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct strings *sp;
|
2002-03-02 18:27:51 +03:00
|
|
|
int idx;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
if (noreset)
|
|
|
|
return;
|
2002-03-02 18:27:51 +03:00
|
|
|
idx = 0;
|
1993-03-21 12:45:37 +03:00
|
|
|
for (sp = &stringdope[0]; sp < &stringdope[NSPACE]; sp++) {
|
2002-03-04 06:07:25 +03:00
|
|
|
if (sp->s_topFree == NULL)
|
1993-03-21 12:45:37 +03:00
|
|
|
continue;
|
|
|
|
sp->s_nextFree = sp->s_topFree;
|
2002-03-02 18:27:51 +03:00
|
|
|
sp->s_nleft = STRINGSIZE << idx;
|
|
|
|
idx++;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Make the string area permanent.
|
|
|
|
* Meant to be called in main, after initialization.
|
|
|
|
*/
|
From Anon Ymous:
1) Statification of modules.
2) Implement the 'detach' and 'Detach' commands for extracting mime
parts from messages.
3) Teach mail to output "In-Reply-To" and "References" header fields
when replying so others can thread us.
4) Implement threading, sorting, and tagging, supported by the
following commands: 'flatten', 'reverse', 'sort', 'thread',
'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag',
'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'.
See the manpage for details (when available - soon).
5) Implement a 'deldups' command to delete duplicate messages based on
their "Message-Id" field, e.g., in replies to a mailing list that
are also CCed to a subscriber. (This can also be accomplished with
the threading and tagging commands.)
6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals
nestable (i.e., implement a conditional stack). The if/else/endif
commands existed before, but they were primitive and undocumented.
The 'if' command currently recognizes the "receiving", "sending",
and "headersonly" mode keywords.
7) Teach the message selecting routine to understand regular
expressions if "regex-search" is defined. Otherwise only case
insensitive substring matches are done (as in the past).
8) Teach the message selection routine to understand boolean
expressions. Improved "colon-modifier" support. See the manpage
for details (when available - soon).
9) Extend paging to all commands (where relevant).
10) Add shell like piping and redirection of (standard) output (if
"enable-piping" is defined). Extend completion to these contexts.
11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
|
|
|
PUBLIC void
|
2002-03-02 17:59:35 +03:00
|
|
|
spreserve(void)
|
1993-03-21 12:45:37 +03:00
|
|
|
{
|
1997-10-19 09:02:57 +04:00
|
|
|
struct strings *sp;
|
1993-03-21 12:45:37 +03:00
|
|
|
|
|
|
|
for (sp = &stringdope[0]; sp < &stringdope[NSPACE]; sp++)
|
2002-03-04 06:07:25 +03:00
|
|
|
sp->s_topFree = NULL;
|
1993-03-21 12:45:37 +03:00
|
|
|
}
|