NetBSD/sys/arch/amiga/dev/drsc.c

219 lines
5.7 KiB
C
Raw Normal View History

/* $NetBSD: drsc.c,v 1.12 1998/07/26 06:45:18 is Exp $ */
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
/*
* Copyright (c) 1996 Ignatios Souvatzis
* Copyright (c) 1994 Michael L. Hitch
* Copyright (c) 1982, 1990 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)dma.c
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <dev/scsipi/scsi_all.h>
#include <dev/scsipi/scsipi_all.h>
#include <dev/scsipi/scsiconf.h>
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#include <amiga/amiga/custom.h>
#include <amiga/amiga/cc.h>
#include <amiga/amiga/device.h>
#include <amiga/amiga/isr.h>
#include <amiga/dev/siopreg.h>
#include <amiga/dev/siopvar.h>
#include <amiga/amiga/drcustom.h>
void drscattach __P((struct device *, struct device *, void *));
1996-12-23 12:09:49 +03:00
int drscmatch __P((struct device *, struct cfdata *, void *));
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
int drsc_dmaintr __P((struct siop_softc *));
#ifdef DEBUG
void drsc_dump __P((void));
#endif
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
struct scsipi_adapter drsc_scsiswitch = {
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
siop_scsicmd,
siop_minphys,
0, /* no lun support */
0, /* no lun support */
};
struct scsipi_device drsc_scsidev = {
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
NULL, /* use default error handler */
NULL, /* do not have a start functio */
NULL, /* have no async handler */
NULL, /* Use default done routine */
};
#ifdef DEBUG
#endif
struct cfattach drsc_ca = {
sizeof(struct siop_softc),
drscmatch,
drscattach
};
static struct siop_softc *drsc_softc;
/*
* One of us is on every DraCo motherboard,
*/
int
1996-12-23 12:09:49 +03:00
drscmatch(pdp, cfp, auxp)
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
struct device *pdp;
1996-12-23 12:09:49 +03:00
struct cfdata *cfp;
void *auxp;
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
{
1996-12-23 12:09:49 +03:00
if (is_draco() && matchname(auxp, "drsc") && (cfp->cf_unit == 0))
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
return(1);
return(0);
}
void
drscattach(pdp, dp, auxp)
struct device *pdp, *dp;
void *auxp;
{
struct siop_softc *sc;
struct zbus_args *zap;
siop_regmap_p rp;
1996-10-13 07:05:43 +04:00
printf("\n");
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
zap = auxp;
sc = (struct siop_softc *)dp;
sc->sc_siopp = rp = (siop_regmap_p)(DRCCADDR+NBPG*DRSCSIPG);
/*
* CTEST7 = TT1
*/
sc->sc_clock_freq = 50; /* Clock = 50MHz */
sc->sc_ctest7 = 0x02;
alloc_sicallback();
sc->sc_link.scsipi_scsi.channel = SCSI_CHANNEL_ONLY_ONE;
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
sc->sc_link.adapter_softc = sc;
sc->sc_link.scsipi_scsi.adapter_target = 7;
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
sc->sc_link.adapter = &drsc_scsiswitch;
sc->sc_link.device = &drsc_scsidev;
sc->sc_link.openings = 2;
sc->sc_link.scsipi_scsi.max_target = 7;
sc->sc_link.type = BUS_SCSI;
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
siopinitialize(sc);
#if 0
sc->sc_isr.isr_intr = drsc_dmaintr;
sc->sc_isr.isr_arg = sc;
sc->sc_isr.isr_ipl = 4;
add_isr(&sc->sc_isr);
#else
drsc_softc = sc;
single_inst_bclr_b(*draco_intpen, DRIRQ_SCSI);
single_inst_bset_b(*draco_intena, DRIRQ_SCSI);
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#endif
/*
* attach all scsi units on us
*/
config_found(dp, &sc->sc_link, scsiprint);
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
}
/*
* Level 4 interrupt processing for the MacroSystem DraCo mainboard
* SCSI. Because the level 4 interrupt is above splbio, the
* interrupt status is saved and an sicallback to the level 2 interrupt
* handler scheduled. This way, the actual processing of the interrupt
* can be deferred until splbio is unblocked.
*/
void
drsc_handler()
{
struct siop_softc *sc = drsc_softc;
siop_regmap_p rp;
int istat;
if (sc->sc_flags & SIOP_INTSOFF)
return; /* interrupts are not active */
rp = sc->sc_siopp;
istat = rp->siop_istat;
if ((istat & (SIOP_ISTAT_SIP | SIOP_ISTAT_DIP)) == 0)
return;
/*
* save interrupt status, DMA status, and SCSI status 0
* (may need to deal with stacked interrupts?)
*/
sc->sc_sstat0 = rp->siop_sstat0;
sc->sc_istat = istat;
sc->sc_dstat = rp->siop_dstat;
/*
* disable interrupts until the callback can process this
* interrupt.
*/
#ifdef DRSC_NOCALLBACK
(void)spl1();
siopintr(sc);
#else
rp->siop_sien = 0;
rp->siop_dien = 0;
sc->sc_flags |= SIOP_INTDEFER | SIOP_INTSOFF;
single_inst_bclr_b(*draco_intpen, DRIRQ_SCSI);
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#ifdef DEBUG
if (*draco_intpen & DRIRQ_SCSI)
1996-10-13 07:05:43 +04:00
printf("%s: intpen still 0x%x\n", sc->sc_dev.dv_xname,
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
*draco_intpen);
#endif
add_sicallback((sifunc_t)siopintr, sc, NULL);
#endif
return;
}
#ifdef DEBUG
void
drsc_dump()
{
1998-01-12 13:39:01 +03:00
extern struct cfdriver drsc_cd;
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
int i;
for (i = 0; i < drsc_cd.cd_ndevs; ++i)
if (drsc_cd.cd_devs[i])
siop_dump(drsc_cd.cd_devs[i]);
}
#endif