NetBSD/sys/arch/macppc/dev/pm_direct.c

1311 lines
28 KiB
C
Raw Normal View History

/* $NetBSD: pm_direct.c,v 1.12 2001/04/01 10:40:46 tsubai Exp $ */
1998-10-20 18:59:16 +04:00
/*
* Copyright (C) 1997 Takashi Hamada
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Takashi Hamada
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* From: pm_direct.c 1.3 03/18/98 Takashi Hamada */
#ifdef DEBUG
#ifndef ADB_DEBUG
#define ADB_DEBUG
#endif
#endif
/* #define PM_GRAB_SI 1 */
#include <sys/param.h>
#include <sys/cdefs.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <machine/adbsys.h>
#include <machine/cpu.h>
#include <macppc/dev/adbvar.h>
#include <macppc/dev/pm_direct.h>
#include <macppc/dev/viareg.h>
extern int adb_polling; /* Are we polling? (Debugger mode) */
/* hardware dependent values */
#define ADBDelay 100 /* XXX */
#define HwCfgFlags3 0x20000 /* XXX */
/* define the types of the Power Manager */
#define PM_HW_UNKNOWN 0x00 /* don't know */
#define PM_HW_PB1XX 0x01 /* PowerBook 1XX series */
#define PM_HW_PB5XX 0x02 /* PowerBook Duo and 5XX series */
/* useful macros */
#define PM_SR() read_via_reg(VIA1, vSR)
#define PM_VIA_INTR_ENABLE() write_via_reg(VIA1, vIER, 0x90)
#define PM_VIA_INTR_DISABLE() write_via_reg(VIA1, vIER, 0x10)
#define PM_VIA_CLR_INTR() write_via_reg(VIA1, vIFR, 0x90)
#if 0
#define PM_SET_STATE_ACKON() via_reg_or(VIA2, vBufB, 0x04)
#define PM_SET_STATE_ACKOFF() via_reg_and(VIA2, vBufB, ~0x04)
#define PM_IS_ON (0x02 == (read_via_reg(VIA2, vBufB) & 0x02))
#define PM_IS_OFF (0x00 == (read_via_reg(VIA2, vBufB) & 0x02))
#else
#define PM_SET_STATE_ACKON() via_reg_or(VIA2, vBufB, 0x10)
#define PM_SET_STATE_ACKOFF() via_reg_and(VIA2, vBufB, ~0x10)
#define PM_IS_ON (0x08 == (read_via_reg(VIA2, vBufB) & 0x08))
#define PM_IS_OFF (0x00 == (read_via_reg(VIA2, vBufB) & 0x08))
#endif
/*
* Variables for internal use
*/
int pmHardware = PM_HW_UNKNOWN;
u_short pm_existent_ADB_devices = 0x0; /* each bit expresses the existent ADB device */
u_int pm_LCD_brightness = 0x0;
u_int pm_LCD_contrast = 0x0;
u_int pm_counter = 0; /* clock count */
/* these values shows that number of data returned after 'send' cmd is sent */
signed char pm_send_cmd_type[] = {
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
0x01, 0x01, -1, -1, -1, -1, -1, -1,
0x00, 0x00, -1, -1, -1, -1, -1, 0x00,
-1, 0x00, 0x02, 0x01, 0x01, -1, -1, -1,
0x00, -1, -1, -1, -1, -1, -1, -1,
1999-06-22 17:12:11 +04:00
0x04, 0x14, -1, 0x03, -1, -1, -1, -1,
0x00, 0x00, 0x02, 0x02, -1, -1, -1, -1,
1998-10-20 18:59:16 +04:00
0x01, 0x01, -1, -1, -1, -1, -1, -1,
0x00, 0x00, -1, -1, 0x01, -1, -1, -1,
1998-10-20 18:59:16 +04:00
0x01, 0x00, 0x02, 0x02, -1, 0x01, 0x03, 0x01,
0x00, 0x01, 0x00, 0x00, 0x00, -1, -1, -1,
0x02, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -1, -1,
0x01, 0x01, 0x01, -1, -1, -1, -1, -1,
0x00, 0x00, -1, -1, -1, -1, 0x04, 0x04,
0x04, -1, 0x00, -1, -1, -1, -1, -1,
0x00, -1, -1, -1, -1, -1, -1, -1,
0x01, 0x02, -1, -1, -1, -1, -1, -1,
0x00, 0x00, -1, -1, -1, -1, -1, -1,
0x02, 0x02, 0x02, 0x04, -1, 0x00, -1, -1,
0x01, 0x01, 0x03, 0x02, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1,
0x00, -1, -1, -1, -1, -1, -1, -1,
0x01, 0x01, -1, -1, 0x00, 0x00, -1, -1,
-1, 0x04, 0x00, -1, -1, -1, -1, -1,
0x03, -1, 0x00, -1, 0x00, -1, -1, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
-1, -1, -1, -1, -1, -1, -1, -1
};
/* these values shows that number of data returned after 'receive' cmd is sent */
signed char pm_receive_cmd_type[] = {
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x02, -1, -1, -1, -1, -1, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
1999-06-22 17:12:11 +04:00
0x05, 0x15, -1, 0x02, -1, -1, -1, -1,
1998-10-20 18:59:16 +04:00
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x02, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x00, 0x03, 0x03, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x04, 0x04, 0x03, 0x09, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, 0x01, 0x01,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x06, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x02, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x00, 0x00, 0x00, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x02, 0x02, -1, -1, 0x02, -1, -1, -1,
0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, 0x02, -1, -1, -1, -1, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-1, -1, -1, -1, -1, -1, -1, -1,
};
/*
* Define the private functions
*/
/* for debugging */
#ifdef ADB_DEBUG
void pm_printerr __P((char *, int, int, char *));
#endif
int pm_wait_busy __P((int));
int pm_wait_free __P((int));
/* these functions are for the PB1XX series */
int pm_receive_pm1 __P((u_char *));
int pm_send_pm1 __P((u_char,int));
int pm_pmgrop_pm1 __P((PMData *));
void pm_intr_pm1 __P((void));
/* these functions are for the PB Duo series and the PB 5XX series */
int pm_receive_pm2 __P((u_char *));
int pm_send_pm2 __P((u_char));
int pm_pmgrop_pm2 __P((PMData *));
void pm_intr_pm2 __P((void));
/* this function is MRG-Based (for testing) */
int pm_pmgrop_mrg __P((PMData *));
/* these functions are called from adb_direct.c */
void pm_setup_adb __P((void));
void pm_check_adb_devices __P((int));
void pm_intr __P((void));
int pm_adb_op __P((u_char *, void *, void *, int));
/* these functions also use the variables of adb_direct.c */
void pm_adb_get_TALK_result __P((PMData *));
void pm_adb_get_ADB_data __P((PMData *));
void pm_adb_poll_next_device_pm1 __P((PMData *));
/*
* These variables are in adb_direct.c.
*/
extern u_char *adbBuffer; /* pointer to user data area */
extern void *adbCompRout; /* pointer to the completion routine */
extern void *adbCompData; /* pointer to the completion routine data */
extern int adbWaiting; /* waiting for return data from the device */
extern int adbWaitingCmd; /* ADB command we are waiting for */
extern int adbStarting; /* doing ADB reinit, so do "polling" differently */
#define ADB_MAX_MSG_LENGTH 16
#define ADB_MAX_HDR_LENGTH 8
struct adbCommand {
u_char header[ADB_MAX_HDR_LENGTH]; /* not used yet */
u_char data[ADB_MAX_MSG_LENGTH]; /* packet data only */
u_char *saveBuf; /* where to save result */
u_char *compRout; /* completion routine pointer */
u_char *compData; /* completion routine data pointer */
u_int cmd; /* the original command for this data */
u_int unsol; /* 1 if packet was unsolicited */
u_int ack_only; /* 1 for no special processing */
};
extern void adb_pass_up __P((struct adbCommand *));
#if 0
/*
* Define the external functions
*/
extern int zshard __P((int)); /* from zs.c */
#endif
#ifdef ADB_DEBUG
/*
* This function dumps contents of the PMData
*/
void
pm_printerr(ttl, rval, num, data)
char *ttl;
int rval;
int num;
char *data;
{
int i;
printf("pm: %s:%04x %02x ", ttl, rval, num);
for (i = 0; i < num; i++)
printf("%02x ", data[i]);
printf("\n");
}
#endif
/*
* Check the hardware type of the Power Manager
*/
void
pm_setup_adb()
{
pmHardware = PM_HW_PB5XX; /* XXX */
}
/*
* Check the existent ADB devices
*/
void
pm_check_adb_devices(id)
int id;
{
u_short ed = 0x1;
ed <<= id;
pm_existent_ADB_devices |= ed;
}
/*
* Wait until PM IC is busy
*/
int
pm_wait_busy(delay)
int delay;
{
while (PM_IS_ON) {
#ifdef PM_GRAB_SI
#if 0
zshard(0); /* grab any serial interrupts */
#else
(void)intr_dispatch(0x70);
#endif
#endif
if ((--delay) < 0)
return 1; /* timeout */
}
return 0;
}
/*
* Wait until PM IC is free
*/
int
pm_wait_free(delay)
int delay;
{
while (PM_IS_OFF) {
#ifdef PM_GRAB_SI
#if 0
zshard(0); /* grab any serial interrupts */
#else
(void)intr_dispatch(0x70);
#endif
#endif
if ((--delay) < 0)
return 0; /* timeout */
}
return 1;
}
/*
* Functions for the PB1XX series
*/
/*
* Receive data from PM for the PB1XX series
*/
int
pm_receive_pm1(data)
u_char *data;
{
#if 0
int rval = 0xffffcd34;
via_reg(VIA2, vDirA) = 0x00;
switch (1) {
default:
if (pm_wait_busy(0x40) != 0)
break; /* timeout */
PM_SET_STATE_ACKOFF();
*data = via_reg(VIA2, 0x200);
rval = 0xffffcd33;
if (pm_wait_free(0x40) == 0)
break; /* timeout */
rval = 0x00;
break;
}
PM_SET_STATE_ACKON();
via_reg(VIA2, vDirA) = 0x00;
return rval;
#else
panic("pm_receive_pm1");
#endif
}
/*
* Send data to PM for the PB1XX series
*/
int
pm_send_pm1(data, delay)
u_char data;
int delay;
{
#if 0
int rval;
via_reg(VIA2, vDirA) = 0xff;
via_reg(VIA2, 0x200) = data;
PM_SET_STATE_ACKOFF();
if (pm_wait_busy(0x400) != 0) {
PM_SET_STATE_ACKON();
via_reg(VIA2, vDirA) = 0x00;
return 0xffffcd36;
}
rval = 0x0;
PM_SET_STATE_ACKON();
if (pm_wait_free(0x40) == 0)
rval = 0xffffcd35;
PM_SET_STATE_ACKON();
via_reg(VIA2, vDirA) = 0x00;
return rval;
#else
panic("pm_send_pm1");
#endif
}
/*
* My PMgrOp routine for the PB1XX series
*/
int
pm_pmgrop_pm1(pmdata)
PMData *pmdata;
{
#if 0
int i;
int s = 0x81815963;
u_char via1_vIER, via1_vDirA;
int rval = 0;
int num_pm_data = 0;
u_char pm_cmd;
u_char pm_data;
u_char *pm_buf;
/* disable all inetrrupts but PM */
via1_vIER = via_reg(VIA1, vIER);
PM_VIA_INTR_DISABLE();
via1_vDirA = via_reg(VIA1, vDirA);
switch (pmdata->command) {
default:
for (i = 0; i < 7; i++) {
via_reg(VIA2, vDirA) = 0x00;
/* wait until PM is free */
if (pm_wait_free(ADBDelay) == 0) { /* timeout */
via_reg(VIA2, vDirA) = 0x00;
/* restore formar value */
via_reg(VIA1, vDirA) = via1_vDirA;
via_reg(VIA1, vIER) = via1_vIER;
return 0xffffcd38;
}
switch (mac68k_machine.machineid) {
case MACH_MACPB160:
case MACH_MACPB165:
case MACH_MACPB165C:
case MACH_MACPB180:
case MACH_MACPB180C:
{
int delay = ADBDelay * 16;
via_reg(VIA2, vDirA) = 0x00;
while ((via_reg(VIA2, 0x200) == 0x7f) && (delay >= 0))
delay--;
if (delay < 0) { /* timeout */
via_reg(VIA2, vDirA) = 0x00;
/* restore formar value */
via_reg(VIA1, vIER) = via1_vIER;
return 0xffffcd38;
}
}
} /* end switch */
s = splhigh();
via1_vDirA = via_reg(VIA1, vDirA);
via_reg(VIA1, vDirA) &= 0x7f;
pm_cmd = (u_char)(pmdata->command & 0xff);
if ((rval = pm_send_pm1(pm_cmd, ADBDelay * 8)) == 0)
break; /* send command succeeded */
via_reg(VIA1, vDirA) = via1_vDirA;
splx(s);
} /* end for */
/* failed to send a command */
if (i == 7) {
via_reg(VIA2, vDirA) = 0x00;
/* restore formar value */
via_reg(VIA1, vDirA) = via1_vDirA;
via_reg(VIA1, vIER) = via1_vIER;
2000-06-09 02:10:45 +04:00
if (s != 0x81815963)
splx(s);
return 0xffffcd38;
1998-10-20 18:59:16 +04:00
}
/* send # of PM data */
num_pm_data = pmdata->num_data;
if ((rval = pm_send_pm1((u_char)(num_pm_data & 0xff), ADBDelay * 8)) != 0)
break; /* timeout */
/* send PM data */
pm_buf = (u_char *)pmdata->s_buf;
for (i = 0; i < num_pm_data; i++)
if ((rval = pm_send_pm1(pm_buf[i], ADBDelay * 8)) != 0)
break; /* timeout */
if ((i != num_pm_data) && (num_pm_data != 0))
break; /* timeout */
/* Will PM IC return data? */
if ((pm_cmd & 0x08) == 0) {
rval = 0;
break; /* no returned data */
}
rval = 0xffffcd37;
if (pm_wait_busy(ADBDelay) != 0)
break; /* timeout */
/* receive PM command */
if ((rval = pm_receive_pm1(&pm_data)) != 0)
break;
pmdata->command = pm_data;
/* receive number of PM data */
if ((rval = pm_receive_pm1(&pm_data)) != 0)
break; /* timeout */
num_pm_data = pm_data;
pmdata->num_data = num_pm_data;
/* receive PM data */
pm_buf = (u_char *)pmdata->r_buf;
for (i = 0; i < num_pm_data; i++) {
if ((rval = pm_receive_pm1(&pm_data)) != 0)
2000-06-09 02:10:45 +04:00
break; /* timeout */
1998-10-20 18:59:16 +04:00
pm_buf[i] = pm_data;
}
rval = 0;
}
via_reg(VIA2, vDirA) = 0x00;
/* restore formar value */
via_reg(VIA1, vDirA) = via1_vDirA;
via_reg(VIA1, vIER) = via1_vIER;
if (s != 0x81815963)
splx(s);
return rval;
#else
panic("pm_pmgrop_pm1");
#endif
}
/*
* My PM interrupt routine for PB1XX series
*/
void
pm_intr_pm1()
{
#if 0
int s;
int rval;
PMData pmdata;
s = splhigh();
PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */
/* ask PM what happend */
pmdata.command = 0x78;
pmdata.num_data = 0;
pmdata.data[0] = pmdata.data[1] = 0;
pmdata.s_buf = &pmdata.data[2];
pmdata.r_buf = &pmdata.data[2];
rval = pm_pmgrop_pm1(&pmdata);
if (rval != 0) {
#ifdef ADB_DEBUG
if (adb_debug)
printf("pm: PM is not ready. error code=%08x\n", rval);
#endif
splx(s);
}
if ((pmdata.data[2] & 0x10) == 0x10) {
if ((pmdata.data[2] & 0x0f) == 0) {
/* ADB data that were requested by TALK command */
pm_adb_get_TALK_result(&pmdata);
} else if ((pmdata.data[2] & 0x08) == 0x8) {
/* PM is requesting to poll */
pm_adb_poll_next_device_pm1(&pmdata);
} else if ((pmdata.data[2] & 0x04) == 0x4) {
/* ADB device event */
pm_adb_get_ADB_data(&pmdata);
}
} else {
#ifdef ADB_DEBUG
if (adb_debug)
pm_printerr("driver does not supported this event.",
rval, pmdata.num_data, pmdata.data);
#endif
}
splx(s);
#else
panic("pm_intr_pm1");
#endif
}
/*
* Functions for the PB Duo series and the PB 5XX series
*/
/*
* Receive data from PM for the PB Duo series and the PB 5XX series
*/
int
pm_receive_pm2(data)
u_char *data;
{
int i;
int rval;
rval = 0xffffcd34;
switch (1) {
default:
/* set VIA SR to input mode */
via_reg_or(VIA1, vACR, 0x0c);
via_reg_and(VIA1, vACR, ~0x10);
i = PM_SR();
PM_SET_STATE_ACKOFF();
if (pm_wait_busy((int)ADBDelay*32) != 0)
break; /* timeout */
PM_SET_STATE_ACKON();
rval = 0xffffcd33;
if (pm_wait_free((int)ADBDelay*32) == 0)
break; /* timeout */
*data = PM_SR();
rval = 0;
break;
}
PM_SET_STATE_ACKON();
via_reg_or(VIA1, vACR, 0x1c);
return rval;
}
/*
* Send data to PM for the PB Duo series and the PB 5XX series
*/
int
pm_send_pm2(data)
u_char data;
{
int rval;
via_reg_or(VIA1, vACR, 0x1c);
write_via_reg(VIA1, vSR, data); /* PM_SR() = data; */
PM_SET_STATE_ACKOFF();
rval = 0xffffcd36;
if (pm_wait_busy((int)ADBDelay*32) != 0) {
PM_SET_STATE_ACKON();
via_reg_or(VIA1, vACR, 0x1c);
return rval;
}
PM_SET_STATE_ACKON();
rval = 0xffffcd35;
if (pm_wait_free((int)ADBDelay*32) != 0)
rval = 0;
PM_SET_STATE_ACKON();
via_reg_or(VIA1, vACR, 0x1c);
return rval;
}
/*
* My PMgrOp routine for the PB Duo series and the PB 5XX series
*/
int
pm_pmgrop_pm2(pmdata)
PMData *pmdata;
{
int i;
int s;
u_char via1_vIER;
int rval = 0;
int num_pm_data = 0;
u_char pm_cmd;
short pm_num_rx_data;
u_char pm_data;
u_char *pm_buf;
s = splhigh();
/* disable all inetrrupts but PM */
via1_vIER = 0x10;
via1_vIER &= read_via_reg(VIA1, vIER);
write_via_reg(VIA1, vIER, via1_vIER);
if (via1_vIER != 0x0)
via1_vIER |= 0x80;
switch (pmdata->command) {
default:
/* wait until PM is free */
pm_cmd = (u_char)(pmdata->command & 0xff);
rval = 0xcd38;
if (pm_wait_free(ADBDelay * 4) == 0)
break; /* timeout */
if (HwCfgFlags3 & 0x00200000) {
/* PB 160, PB 165(c), PB 180(c)? */
int delay = ADBDelay * 16;
write_via_reg(VIA2, vDirA, 0x00);
while ((read_via_reg(VIA2, 0x200) == 0x07) &&
(delay >= 0))
delay--;
if (delay < 0) {
rval = 0xffffcd38;
break; /* timeout */
}
}
/* send PM command */
if ((rval = pm_send_pm2((u_char)(pm_cmd & 0xff))))
break; /* timeout */
/* send number of PM data */
num_pm_data = pmdata->num_data;
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
if (pm_send_cmd_type[pm_cmd] < 0) {
if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0)
break; /* timeout */
pmdata->command = 0;
}
} else { /* PB 1XX series ? */
if ((rval = pm_send_pm2((u_char)(num_pm_data & 0xff))) != 0)
break; /* timeout */
}
/* send PM data */
pm_buf = (u_char *)pmdata->s_buf;
for (i = 0 ; i < num_pm_data; i++)
if ((rval = pm_send_pm2(pm_buf[i])) != 0)
break; /* timeout */
if (i != num_pm_data)
break; /* timeout */
/* check if PM will send me data */
pm_num_rx_data = pm_receive_cmd_type[pm_cmd];
pmdata->num_data = pm_num_rx_data;
if (pm_num_rx_data == 0) {
rval = 0;
break; /* no return data */
}
/* receive PM command */
pm_data = pmdata->command;
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
pm_num_rx_data--;
if (pm_num_rx_data == 0)
if ((rval = pm_receive_pm2(&pm_data)) != 0) {
rval = 0xffffcd37;
break;
}
pmdata->command = pm_data;
} else { /* PB 1XX series ? */
if ((rval = pm_receive_pm2(&pm_data)) != 0) {
rval = 0xffffcd37;
break;
}
pmdata->command = pm_data;
}
/* receive number of PM data */
if (HwCfgFlags3 & 0x00020000) { /* PB Duo, PB 5XX */
if (pm_num_rx_data < 0) {
if ((rval = pm_receive_pm2(&pm_data)) != 0)
break; /* timeout */
num_pm_data = pm_data;
} else
num_pm_data = pm_num_rx_data;
pmdata->num_data = num_pm_data;
} else { /* PB 1XX serias ? */
if ((rval = pm_receive_pm2(&pm_data)) != 0)
break; /* timeout */
num_pm_data = pm_data;
pmdata->num_data = num_pm_data;
}
/* receive PM data */
pm_buf = (u_char *)pmdata->r_buf;
for (i = 0; i < num_pm_data; i++) {
if ((rval = pm_receive_pm2(&pm_data)) != 0)
break; /* timeout */
pm_buf[i] = pm_data;
}
rval = 0;
}
/* restore former value */
write_via_reg(VIA1, vIER, via1_vIER);
splx(s);
return rval;
}
/*
* My PM interrupt routine for the PB Duo series and the PB 5XX series
*/
void
pm_intr_pm2()
{
int s;
int rval;
PMData pmdata;
s = splhigh();
PM_VIA_CLR_INTR(); /* clear VIA1 interrupt */
/* ask PM what happend */
pmdata.command = 0x78;
pmdata.num_data = 0;
pmdata.s_buf = &pmdata.data[2];
pmdata.r_buf = &pmdata.data[2];
rval = pm_pmgrop_pm2(&pmdata);
if (rval != 0) {
#ifdef ADB_DEBUG
if (adb_debug)
printf("pm: PM is not ready. error code: %08x\n", rval);
#endif
splx(s);
}
switch ((u_int)(pmdata.data[2] & 0xff)) {
case 0x00: /* 1 sec interrupt? */
break;
case 0x80: /* 1 sec interrupt? */
pm_counter++;
break;
case 0x08: /* Brightness/Contrast button on LCD panel */
/* get brightness and contrast of the LCD */
pm_LCD_brightness = (u_int)pmdata.data[3] & 0xff;
pm_LCD_contrast = (u_int)pmdata.data[4] & 0xff;
/*
pm_printerr("#08", rval, pmdata.num_data, pmdata.data);
pmdata.command = 0x33;
pmdata.num_data = 1;
pmdata.s_buf = pmdata.data;
pmdata.r_buf = pmdata.data;
pmdata.data[0] = pm_LCD_contrast;
rval = pm_pmgrop_pm2(&pmdata);
pm_printerr("#33", rval, pmdata.num_data, pmdata.data);
*/
/* this is an experimental code */
pmdata.command = 0x41;
pmdata.num_data = 1;
pmdata.s_buf = pmdata.data;
pmdata.r_buf = pmdata.data;
pm_LCD_brightness = 0x7f - pm_LCD_brightness / 2;
1998-11-15 22:41:33 +03:00
if (pm_LCD_brightness < 0x08)
pm_LCD_brightness = 0x08;
if (pm_LCD_brightness > 0x78)
pm_LCD_brightness = 0x78;
1998-10-20 18:59:16 +04:00
pmdata.data[0] = pm_LCD_brightness;
rval = pm_pmgrop_pm2(&pmdata);
break;
case 0x10: /* ADB data that were requested by TALK command */
case 0x14:
pm_adb_get_TALK_result(&pmdata);
break;
case 0x16: /* ADB device event */
case 0x18:
case 0x1e:
pm_adb_get_ADB_data(&pmdata);
break;
default:
#ifdef ADB_DEBUG
if (adb_debug)
pm_printerr("driver does not supported this event.",
pmdata.data[2], pmdata.num_data,
pmdata.data);
#endif
break;
}
splx(s);
}
#if 0
/*
* MRG-based PMgrOp routine
*/
int
pm_pmgrop_mrg(pmdata)
PMData *pmdata;
{
u_int32_t rval=0;
asm("
movl %1, a0
.word 0xa085
movl d0, %0"
: "=g" (rval)
: "g" (pmdata)
: "a0", "d0" );
return rval;
}
#endif
/*
* My PMgrOp routine
*/
int
pmgrop(pmdata)
PMData *pmdata;
{
switch (pmHardware) {
case PM_HW_PB1XX:
return (pm_pmgrop_pm1(pmdata));
break;
case PM_HW_PB5XX:
return (pm_pmgrop_pm2(pmdata));
break;
default:
/* return (pmgrop_mrg(pmdata)); */
return 1;
}
}
/*
* My PM interrupt routine
*/
void
pm_intr()
{
switch (pmHardware) {
case PM_HW_PB1XX:
pm_intr_pm1();
break;
case PM_HW_PB5XX:
pm_intr_pm2();
break;
default:
break;
}
}
/*
* Synchronous ADBOp routine for the Power Manager
*/
int
pm_adb_op(buffer, compRout, data, command)
u_char *buffer;
void *compRout;
void *data;
int command;
{
int i;
int s;
int rval;
int timo;
1998-10-20 18:59:16 +04:00
PMData pmdata;
struct adbCommand packet;
if (adbWaiting == 1)
return 1;
s = splhigh();
write_via_reg(VIA1, vIER, 0x10);
adbBuffer = buffer;
adbCompRout = compRout;
adbCompData = data;
pmdata.command = 0x20;
pmdata.s_buf = pmdata.data;
pmdata.r_buf = pmdata.data;
/* if the command is LISTEN, add number of ADB data to number of PM data */
if ((command & 0xc) == 0x8) {
if (buffer != (u_char *)0)
pmdata.num_data = buffer[0] + 3;
} else {
pmdata.num_data = 3;
}
pmdata.data[0] = (u_char)(command & 0xff);
pmdata.data[1] = 0;
if ((command & 0xc) == 0x8) { /* if the command is LISTEN, copy ADB data to PM buffer */
if ((buffer != (u_char *)0) && (buffer[0] <= 24)) {
pmdata.data[2] = buffer[0]; /* number of data */
for (i = 0; i < buffer[0]; i++)
pmdata.data[3 + i] = buffer[1 + i];
} else
pmdata.data[2] = 0;
} else
pmdata.data[2] = 0;
if ((command & 0xc) != 0xc) { /* if the command is not TALK */
/* set up stuff for adb_pass_up */
packet.data[0] = 1 + pmdata.data[2];
packet.data[1] = command;
for (i = 0; i < pmdata.data[2]; i++)
packet.data[i+2] = pmdata.data[i+3];
packet.saveBuf = adbBuffer;
packet.compRout = adbCompRout;
packet.compData = adbCompData;
packet.cmd = command;
packet.unsol = 0;
packet.ack_only = 1;
adb_polling = 1;
adb_pass_up(&packet);
adb_polling = 0;
}
rval = pmgrop(&pmdata);
2000-06-09 02:10:45 +04:00
if (rval != 0) {
splx(s);
1998-10-20 18:59:16 +04:00
return 1;
2000-06-09 02:10:45 +04:00
}
1998-10-20 18:59:16 +04:00
delay(10000);
1998-10-20 18:59:16 +04:00
adbWaiting = 1;
adbWaitingCmd = command;
PM_VIA_INTR_ENABLE();
/* wait until the PM interrupt is occured */
timo = 0x80000;
1998-10-20 18:59:16 +04:00
while (adbWaiting == 1) {
if (read_via_reg(VIA1, vIFR) & 0x14)
pm_intr();
#ifdef PM_GRAB_SI
#if 0
zshard(0); /* grab any serial interrupts */
#else
(void)intr_dispatch(0x70);
#endif
#endif
if ((--timo) < 0) {
2000-06-09 02:10:45 +04:00
splx(s);
1998-10-20 18:59:16 +04:00
return 1;
2000-06-09 02:10:45 +04:00
}
1998-10-20 18:59:16 +04:00
}
/* this command enables the interrupt by operating ADB devices */
if (HwCfgFlags3 & 0x00020000) { /* PB Duo series, PB 5XX series */
pmdata.command = 0x20;
pmdata.num_data = 4;
pmdata.s_buf = pmdata.data;
pmdata.r_buf = pmdata.data;
pmdata.data[0] = 0x00;
pmdata.data[1] = 0x86; /* magic spell for awaking the PM */
pmdata.data[2] = 0x00;
pmdata.data[3] = 0x0c; /* each bit may express the existent ADB device */
} else { /* PB 1XX series */
pmdata.command = 0x20;
pmdata.num_data = 3;
pmdata.s_buf = pmdata.data;
pmdata.r_buf = pmdata.data;
pmdata.data[0] = (u_char)(command & 0xf0) | 0xc;
pmdata.data[1] = 0x04;
pmdata.data[2] = 0x00;
}
rval = pmgrop(&pmdata);
splx(s);
return rval;
}
void
pm_adb_get_TALK_result(pmdata)
PMData *pmdata;
{
int i;
struct adbCommand packet;
/* set up data for adb_pass_up */
packet.data[0] = pmdata->num_data-1;
packet.data[1] = pmdata->data[3];
for (i = 0; i <packet.data[0]-1; i++)
packet.data[i+2] = pmdata->data[i+4];
packet.saveBuf = adbBuffer;
packet.compRout = adbCompRout;
packet.compData = adbCompData;
packet.unsol = 0;
packet.ack_only = 0;
adb_polling = 1;
adb_pass_up(&packet);
adb_polling = 0;
adbWaiting = 0;
adbBuffer = (long)0;
adbCompRout = (long)0;
adbCompData = (long)0;
}
void
pm_adb_get_ADB_data(pmdata)
PMData *pmdata;
{
int i;
struct adbCommand packet;
/* set up data for adb_pass_up */
packet.data[0] = pmdata->num_data-1; /* number of raw data */
packet.data[1] = pmdata->data[3]; /* ADB command */
for (i = 0; i <packet.data[0]-1; i++)
packet.data[i+2] = pmdata->data[i+4];
packet.unsol = 1;
packet.ack_only = 0;
adb_pass_up(&packet);
}
void
pm_adb_poll_next_device_pm1(pmdata)
PMData *pmdata;
{
int i;
int ndid;
u_short bendid = 0x1;
int rval;
PMData tmp_pmdata;
/* find another existent ADB device to poll */
for (i = 1; i < 16; i++) {
2000-06-09 02:10:45 +04:00
ndid = (ADB_CMDADDR(pmdata->data[3]) + i) & 0xf;
1998-10-20 18:59:16 +04:00
bendid <<= ndid;
if ((pm_existent_ADB_devices & bendid) != 0)
break;
}
/* poll the other device */
tmp_pmdata.command = 0x20;
tmp_pmdata.num_data = 3;
tmp_pmdata.s_buf = tmp_pmdata.data;
tmp_pmdata.r_buf = tmp_pmdata.data;
tmp_pmdata.data[0] = (u_char)(ndid << 4) | 0xc;
tmp_pmdata.data[1] = 0x04; /* magic spell for awaking the PM */
tmp_pmdata.data[2] = 0x00;
rval = pmgrop(&tmp_pmdata);
}
void
pm_adb_restart()
{
PMData p;
1999-06-22 15:29:11 +04:00
p.command = PMU_RESET_CPU;
1998-10-20 18:59:16 +04:00
p.num_data = 0;
p.s_buf = p.data;
p.r_buf = p.data;
pmgrop(&p);
}
1998-11-15 22:41:33 +03:00
1999-07-11 20:59:31 +04:00
void
pm_adb_poweroff()
{
PMData p;
p.command = PMU_POWER_OFF;
p.num_data = 4;
p.s_buf = p.data;
p.r_buf = p.data;
strcpy(p.data, "MATT");
pmgrop(&p);
}
1998-11-15 22:41:33 +03:00
void
pm_read_date_time(time)
u_long *time;
{
PMData p;
1999-06-22 15:29:11 +04:00
p.command = PMU_READ_RTC;
1998-11-15 22:41:33 +03:00
p.num_data = 0;
p.s_buf = p.data;
p.r_buf = p.data;
pmgrop(&p);
1998-12-07 20:17:14 +03:00
bcopy(p.data, time, 4);
1998-11-15 22:41:33 +03:00
}
1999-06-22 15:29:11 +04:00
void
pm_set_date_time(time)
u_long time;
{
PMData p;
p.command = PMU_SET_RTC;
p.num_data = 4;
p.s_buf = p.r_buf = p.data;
bcopy(&time, p.data, 4);
pmgrop(&p);
}
1999-06-22 17:12:11 +04:00
int
pm_read_brightness()
{
PMData p;
p.command = PMU_READ_BRIGHTNESS;
p.num_data = 1; /* XXX why 1? */
p.s_buf = p.r_buf = p.data;
p.data[0] = 0;
pmgrop(&p);
return p.data[0];
}
void
pm_set_brightness(val)
int val;
{
PMData p;
val = 0x7f - val / 2;
if (val < 0x08)
val = 0x08;
if (val > 0x78)
val = 0x78;
p.command = PMU_SET_BRIGHTNESS;
p.num_data = 1;
p.s_buf = p.r_buf = p.data;
p.data[0] = val;
pmgrop(&p);
}
void
pm_init_brightness()
{
int val;
val = pm_read_brightness();
pm_set_brightness(val);
}
void
pm_eject_pcmcia(slot)
int slot;
{
PMData p;
if (slot != 0 && slot != 1)
return;
p.command = PMU_EJECT_PCMCIA;
p.num_data = 1;
p.s_buf = p.r_buf = p.data;
p.data[0] = 5 + slot; /* XXX */
pmgrop(&p);
}
1999-06-22 17:12:11 +04:00
int
pm_read_nvram(addr)
int addr;
{
PMData p;
p.command = PMU_READ_NVRAM;
p.num_data = 2;
p.s_buf = p.r_buf = p.data;
p.data[0] = addr >> 8;
p.data[1] = addr;
pmgrop(&p);
return p.data[0];
}
void
pm_write_nvram(addr, val)
int addr, val;
{
PMData p;
p.command = PMU_WRITE_NVRAM;
p.num_data = 3;
p.s_buf = p.r_buf = p.data;
p.data[0] = addr >> 8;
p.data[1] = addr;
p.data[2] = val;
pmgrop(&p);
}