NetBSD/distrib/notes/amiga/xfer

108 lines
3.9 KiB
Plaintext
Raw Normal View History

1994-09-19 21:45:35 +04:00
Installation is supported from several media types, including:
AmigaDOS HD partitions
Tape
NFS partitions
FTP
No matter what you do, however, you'll need to have one disk handy,
on which you will put the install floppy image.
All the images are available from the directory "amiga/floppies",
under the root of the NetBSD tree at your favorite archive site.
If you are using NetBSD/amiga to make the floppies, you should use
the command dd(1) to write the raw floppy images (.fs files) to
the disk. To write onto fd0 use:
dd if=inst-10.fs of=/dev/rfd0a bs=11b
If you are using AmigaDOS to make the floppies, you should
use the rawwrite utility, provided in the directory
"amiga/utilities" in the distribution. To write the image to
the floppy in df0 use (from cli):
rawwrite 0 inst-10.fs
The steps necessary to prepare the distribution sets
for installation depend on which method of installation
you choose. The various methods are explained below.
To prepare for installing via an AmigaDOS partition:
To install NetBSD from an AmigaDOS partition, you need to
get the NetBSD distribution sets you wish to install
1994-10-21 11:26:57 +03:00
on your system on to an AmigaDOS partition. All of the
set_name.xx pieces can be placed in a single directory
instead of separate ones for each distribution set. This
will also simplify the installation work later on.
1994-09-19 21:45:35 +04:00
Note where you place the files you will need this later.
Once you have done this, you can proceed to the next
step in the installation process, preparing your hard disk.
To prepare for installing via a tape:
1994-10-21 11:26:57 +03:00
To install NetBSD from a tape, you need to somehow
get the NetBSD filesets you wish to install on
1994-09-19 21:45:35 +04:00
your system on to the appropriate kind of tape,
in tar format.
If you're making the tape on a UN*X system, the easiest
way to do so is:
tar cvf <tape_device> <files>
where "<tape_device>" is the name of the tape device
that describes the tape drive you're using (possibly
something like /dev/nrst0, but we make no guarantees 8-).
If you can't figure it out, ask your system administrator.
"<files>" are the names of the "set_name.nnn" files
which you want to be placed on the tape.
Once you have done this, you can proceed to the next
step in the installation process, preparing your hard disk.
To prepare for installing via an NFS partition:
NOTE: this method of installation is recommended
only for those already familiar with using
the BSD network-manipulation commands and
interfaces. If you aren't, this documentation
should help, but is not intended to be
all-encompassing.
Place the NetBSD software you wish to install into
a directory on an NFS server, and make that directory
mountable by the machine which you will be installing
NetBSD on. This will probably require modifying the
/etc/exports file of the NFS server and resetting
mountd, acts which will require superuser privileges.
Note the numeric IP address of the NFS server and of
the router closest to the the new NetBSD machine,
if the NFS server is not on a network which is
directly attached to the NetBSD machine.
Once you have done this, you can proceed to the next
step in the installation process, preparing your hard disk.
To prepare for installing via FTP:
NOTE: this method of installation is recommended
only for those already familiar with using
the BSD network-manipulation commands and
interfaces. If you aren't, this documentation
should help, but is not intended to be
all-encompassing.
The preparations for this method of installation
are easy: all you have to do is make sure that
there's some FTP site from which you can retrieve
the NetBSD installation when it's time to do
the install. You should know the numeric IP
address of that site, the numeric IP address of
your nearest router if one is necessary
Once you have done this, you can proceed to the next
step in the installation process, preparing your hard disk.