NetBSD/sys/arch/m68k/fpe/fpu_arith.h

/*	$NetBSD: fpu_arith.h,v 1.2 1999/05/30 20:17:48 briggs Exp $ */

/*
 * Copyright (c) 1992, 1993
 *	The Regents of the University of California.  All rights reserved.
 *
 * This software was developed by the Computer Systems Engineering group
 * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
 * contributed to Berkeley.
 *
 * All advertising materials mentioning features or use of this software
 * must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Lawrence Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)fpu_arith.h	8.1 (Berkeley) 6/11/93
 */

/*
 * Extended-precision arithmetic.
 *
 * We hold the notion of a `carry register', which may or may not be a
 * machine carry bit or register.  On the SPARC, it is just the machine's
 * carry bit.
 *
 * In the worst case, you can compute the carry from x+y as
 *	(unsigned)(x + y) < (unsigned)x
 * and from x+y+c as
 *	((unsigned)(x + y + c) <= (unsigned)x && (y|c) != 0)
 * for example.
 */

#ifndef FPE_USE_ASM

/* set up for extended-precision arithemtic */
#define	FPU_DECL_CARRY quad_t fpu_carry, fpu_tmp;

/*
 * We have three kinds of add:
 *	add with carry:					  r = x + y + c
 *	add (ignoring current carry) and set carry:	c'r = x + y + 0
 *	add with carry and set carry:			c'r = x + y + c
 * The macros use `C' for `use carry' and `S' for `set carry'.
 * Note that the state of the carry is undefined after ADDC and SUBC,
 * so if all you have for these is `add with carry and set carry',
 * that is OK.
 *
 * The same goes for subtract, except that we compute x - y - c.
 *
 * Finally, we have a way to get the carry into a `regular' variable,
 * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
 * into carry; GET_CARRY sets its argument to 0 or 1.
 */
#define	FPU_ADDC(r, x, y) \
	(r) = (x) + (y) + (!!fpu_carry)
#define	FPU_ADDS(r, x, y) \
	{ \
		fpu_tmp = (quad_t)(x) + (quad_t)(y); \
		(r) = (u_int)fpu_tmp; \
		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
	}
#define	FPU_ADDCS(r, x, y) \
	{ \
		fpu_tmp = (quad_t)(x) + (quad_t)(y) + (!!fpu_carry); \
		(r) = (u_int)fpu_tmp; \
		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
	}
#define	FPU_SUBC(r, x, y) \
	(r) = (x) - (y) - (!!fpu_carry)
#define	FPU_SUBS(r, x, y) \
	{ \
		fpu_tmp = (quad_t)(x) - (quad_t)(y); \
		(r) = (u_int)fpu_tmp; \
		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
	}
#define	FPU_SUBCS(r, x, y) \
	{ \
		fpu_tmp = (quad_t)(x) - (quad_t)(y) - (!!fpu_carry); \
		(r) = (u_int)fpu_tmp; \
		fpu_carry = ((fpu_tmp & 0xffffffff00000000LL) != 0); \
	}

#define	FPU_GET_CARRY(r) (r) = (!!fpu_carry)
#define	FPU_SET_CARRY(v) fpu_carry = ((v) != 0)

#else

/* set up for extended-precision arithemtic */
#define	FPU_DECL_CARRY register int fpu_tmp;

/*
 * We have three kinds of add:
 *	add with carry:					  r = x + y + c
 *	add (ignoring current carry) and set carry:	c'r = x + y + 0
 *	add with carry and set carry:			c'r = x + y + c
 * The macros use `C' for `use carry' and `S' for `set carry'.
 * Note that the state of the carry is undefined after ADDC and SUBC,
 * so if all you have for these is `add with carry and set carry',
 * that is OK.
 *
 * The same goes for subtract, except that we compute x - y - c.
 *
 * Finally, we have a way to get the carry into a `regular' variable,
 * or set it from a value.  SET_CARRY turns 0 into no-carry, nonzero
 * into carry; GET_CARRY sets its argument to 0 or 1.
 */
#define	FPU_ADDC(r, x, y)						\
	{								\
		asm volatile("movel %1,%0" : "=d"(fpu_tmp) : "g"(x));	\
		asm volatile("addxl %1,%0" : "=d"(fpu_tmp) : "d"(y));	\
		asm volatile("movel %1,%0" : "=g"(r) : "r"(fpu_tmp));	\
	}
#define	FPU_ADDS(r, x, y)						\
	{								\
		asm volatile("movel %1,%0" : "=d"(fpu_tmp) : "g"(x));	\
		asm volatile("addl %1,%0" : "=d"(fpu_tmp) : "g"(y));	\
		asm volatile("movel %1,%0" : "=g"(r) : "r"(fpu_tmp));	\
	}
#define	FPU_ADDCS(r, x, y) FPU_ADDC(r, x, y)

#define	FPU_SUBC(r, x, y)						\
	{								\
		asm volatile("movel %1,%0" : "=d"(fpu_tmp) : "g"(x));	\
		asm volatile("subxl %1,%0" : "=d"(fpu_tmp) : "d"(y));	\
		asm volatile("movel %1,%0" : "=g"(r) : "r"(fpu_tmp));	\
	}
#define	FPU_SUBS(r, x, y)						\
	{								\
		asm volatile("movel %1,%0" : "=d"(fpu_tmp) : "g"(x));	\
		asm volatile("subl %1,%0" : "=d"(fpu_tmp) : "g"(y));	\
		asm volatile("movel %1,%0" : "=g"(r) : "r"(fpu_tmp));	\
	}
#define	FPU_SUBCS(r, x, y) FPU_SUBC(r, x, y)

#define	FPU_GET_CARRY(r)				\
	{						\
		asm volatile("moveq #0,%0" : "=d"(r));	\
		asm volatile("addxl %0,%0" : "+d"(r));	\
	}
#define	FPU_SET_CARRY(v)						\
	{								\
		asm volatile("moveq #0,%0" : "=d"(fpu_tmp));		\
		asm volatile("subl %1,%0" : "=d"(fpu_tmp) : "g"(v));	\
	}

#endif /* FPE_USE_ASM */