Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/etc/rc.conf

130 lines
4.3 KiB
Plaintext
Raw Normal View History

Remove update, it's no longer used.
1999-11-15 23:04:50 +03:00
# $NetBSD: rc.conf,v 1.61 1999/11/15 20:04:51 fvdl Exp $
move start-time configuration from netstart, rc, rc.local into the new /etc/rc.conf. this also includes the following changes: netstart: ifaliases now includes a netmask, to ensure aliases work. rc/rc.local: make _everything_ based on configuration in rc.conf. also move things around such that DNS and YP are started early enough that other daemons needing their services also exist. move ldconfig from rc.local here, and also make it use /etc/ld.so.conf if it exists. run /etc/rc.lkm if it exists, a boot time.
1997-01-05 15:01:54 +03:00
#
# see rc.conf(5) for more information.
# uncomment this if you want to use local paths in rc
add /usr/pkg/sbin:/usr/pkg/bin to (commented out) PATH entry
1998-08-04 08:09:05 +04:00
#export PATH=$PATH:/usr/pkg/sbin:/usr/pkg/bin:/usr/local/sbin:/usr/local/bin
move start-time configuration from netstart, rc, rc.local into the new /etc/rc.conf. this also includes the following changes: netstart: ifaliases now includes a netmask, to ensure aliases work. rc/rc.local: make _everything_ based on configuration in rc.conf. also move things around such that DNS and YP are started early enough that other daemons needing their services also exist. move ldconfig from rc.local here, and also make it use /etc/ld.so.conf if it exists. run /etc/rc.lkm if it exists, a boot time.
1997-01-05 15:01:54 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# Use program=YES to enable program, NO to disable it. program_flags are
# passed to the program on the command line.
If foo_flags is DEFAULT, run the program with a default set of flags. Most users will use this, and therefore will never have to worry about flags changing between releases. It's also a bit less error-prone.
1997-03-10 12:16:13 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# If this is not set to YES, the system will drop into single-user mode.
rc_configured=NO
Allow routes to be flushed in netstart (rc.conf option, default YES). PR 3228.
1997-07-22 22:41:08 +04:00
A basic /etc/rc.shutdown. Bails out if do_rcshutdown!=YES in /etc/rc.conf (default is YES). Kills xdm and waits for it to terminate if it was enabled in rc.conf (based on a code snippet from Ignatios).
1998-10-29 23:24:56 +03:00
# If this is set to NO, shutdown(8) will not run /etc/rc.shutdown.
do_rcshutdown=YES
provide empty settings for $hostname, $domainname and $defaultroute, with comments indicating alternation locations for info
1997-05-12 15:33:31 +04:00
# Basic network configuration
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 23:01:13 +04:00
# Fully Qualified Internet Domain Name (a.k.a. hostname, e.g. foo.baz.edu)
fix indentation
1998-01-26 15:01:35 +03:00
hostname="" # if blank, use /etc/myname
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 23:01:13 +04:00
# if there's only one way out of your network, set this to the hostname
# or the IP address of the router that will get your packets off the LAN.
fix indentation
1998-01-26 15:01:35 +03:00
defaultroute="" # if blank, use /etc/mygate
provide empty settings for $hostname, $domainname and $defaultroute, with comments indicating alternation locations for info
1997-05-12 15:33:31 +04:00
Minor wording change in a comment (also formerly known as -> formerly known as)
1999-05-18 07:30:02 +04:00
# the NIS domain name (formerly known as Yellow Pages); not in any way
no changes in previous rev, as documented; goof! (sorry). Once again - document that "domainname" is about YP/NIS, not Internet, per PR#5442
1998-05-11 23:01:13 +04:00
# related to Internet domain names.
domainname="" # if blank, use /etc/defaultdomain
Move the knowledge that /usr and /var should be mounted early from rc.subr to the default rc.conf. While this is no longer necessary to supress noise, it increases the clarity of the situation and removes one more bit of what should be adjustable configuration from scripts that site admins shouldn't have to edit. Addresses PRs misc/7406 and (partially) bin/7491.
1999-04-29 03:32:29 +04:00
# Filesystems to mount early in boot-up
repair diskless startup: "netstart" needs "sysctl" and "awk" now, thus "/usr" must be mounted. mount_critical_filesystems() didn't mount it, even if listed in "critical_filesystems", if it is nfs. Solution: introduce another rc.conf variable "critical_filesystems_beforenet" which contains filesystems to be mounted before "netstart". Perhaps "netstart" should be split up, but this would make things even more complex...
1999-07-08 01:24:56 +04:00
critical_filesystems_beforenet="/usr /var" # "netstart" needs /usr
critical_filesystems=""
Replace the (slightly broken) check to avoid double mounting of filesystems by a correct one. (too bad that there was no agreement about a mount option doing the same...) Introduce a new rc.conf variable to mount user-defined filesystems early in startup (eg for syslog, crashdumps, ...).
1997-10-10 13:37:54 +04:00
print a warning if no swap devices are configured and "no_swap" is not YES.
1997-11-23 07:17:57 +03:00
# Set this to YES if you have purposefully setup no swap partitions and
# don't want to be warned about it
fix indentation
1998-01-26 15:01:35 +03:00
no_swap=NO
print a warning if no swap devices are configured and "no_swap" is not YES.
1997-11-23 07:17:57 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# One-time actions and programs on boot-up.
Disable rc.lkm by default. This has the nontrivial, hidden effect that if rc.lkm is run, and BIND is used to resolve names, the BEFORENET stage of rc-calling-rc.lkm will hang trying to mount a nfs /usr.
1998-09-14 22:22:20 +04:00
lkm=NO # run /etc/rc.lkm
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
savecore=YES savecore_flags=""
update_motd=YES # updates /etc/motd
support dmesg=NO and dmesg_flags, and do not cut the old boot messages..they might be useful. fix a typo (rbootd is not rarpd)
1999-01-12 15:42:46 +03:00
dmesg=YES dmesg_flags="" # write /var/run/dmesg.boot
make motd update conditional on an rc.conf variable (update_motd), and move it before interactive logins are possible (just in case).
1997-04-23 05:24:22 +04:00
Add support for $defcorename
1999-09-28 18:53:17 +04:00
# default core name template. If $defcorename is non-empty, this value will be
# used for core dumps names for programs that didn't get their per-process
# template set (see sysctl(3) and sysctl(8)).
defcorename=""
increase the securelevel (using the same rules as before) much earlier in the boot process. before cron, sendmail, inetd, etc, are run, but after lkms are loaded. this avoids the chances of `@reboot', mail .forwards, remote logins, etc., happening before the securelevel has been raised.
1999-01-31 11:46:58 +03:00
# Security setting. If $securelevel is non-empty, the system securelevel
oops, do not set a default securelevel.
1999-02-01 03:32:52 +03:00
# is set to this value early in the boot sequence. Otherwise the default
# action is taken (see init(8)).
securelevel="" # securelevel to set to
increase the securelevel (using the same rules as before) much earlier in the boot process. before cron, sendmail, inetd, etc, are run, but after lkms are loaded. this avoids the chances of `@reboot', mail .forwards, remote logins, etc., happening before the securelevel has been raised.
1999-01-31 11:46:58 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# Networking startup
ipfilter=NO # uses /etc/ipf.conf
PR/3638: David Brownlee: Add /etc/ipnat.conf functionality.
1997-12-20 23:11:53 +03:00
ipnat=NO # uses /etc/ipnat.conf
add $ipmon and $ipmon_flags, to control startup of ipmon(8)
1997-10-07 16:11:48 +04:00
ipmon=NO ipmon_flags="-sn" # syslog ipfilter messages
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
auto_ifconfig=YES # config all avail. interfaces
net_interfaces="" # used only if above is NO
flushroutes=YES # flush routes in netstart
Remove comment about critfs_requires_network, which has gone away
1999-04-22 01:58:29 +04:00
dhclient=NO # behave as a DHCP client
Add a note about critfs_requires_network on dhclient line.
1999-04-09 19:18:51 +04:00
dhclient_flags="" # blank: config all interfaces
Only start programms which we started in the previous version (1.15) and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 14:22:24 +04:00
ntpdate=NO ntpdate_hosts="" # blank: hosts in /etc/ntp.conf
- remove additional `adding interface aliases:' message. - add `ppp_peers' support, which will run `pppd call <peer>' for each peer listed in the ppp_peers file that also has a /etc/ppp/peers/<peer> configuration file.
1997-11-17 20:45:28 +03:00
ppp_peers="" # /etc/ppp/peers to call
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd). Right now netsetart does not bother you even if you do not have "options INET6" in the kernel.
1999-07-03 07:29:29 +04:00
ip6forwarding="NO" # IPv6 router
rtsol="NO" rtsol_flags="" # IPv6 autoconf (on non-router)
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Disable portmap by default, and add some more comments in that section.
1999-11-05 14:19:49 +03:00
# Daemons required by servers. These are not needed for strictly client use.
# inetd is used to start many IP-based services.
Add -l option to inetd.
1997-09-07 23:13:50 +04:00
inetd=YES inetd_flags="-l" # -l logs libwrap
Disable portmap by default, and add some more comments in that section.
1999-11-05 14:19:49 +03:00
# portmap is used to look up RPC-based services.
portmap=NO portmap_flags="-l" # -l logs libwrap
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
# Commonly used daemons
make -s flags for syslogd and lpd the default
1999-04-29 22:26:43 +04:00
syslogd=YES syslogd_flags="-s" # -s "secure" unix domain only
Enable cron to be turned on and off from rc.conf, like other daemons. From Soren S. Jorvang <soren@t.dk>, closes his PR bin/5250.
1999-01-12 07:58:37 +03:00
cron=YES
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
named=NO named_flags=""
timed=NO timed_flags=""
Add -f /var/db/ntp.drift to default xntpd parameters.
1999-10-10 01:07:19 +04:00
xntpd=NO xntpd_flags="-p /var/run/xntpd.pid -f /var/db/ntp.drift"
Only start programms which we started in the previous version (1.15) and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 14:22:24 +04:00
sendmail=NO sendmail_flags="-bd -q30m"
make -s flags for syslogd and lpd the default
1999-04-29 22:26:43 +04:00
lpd=NO lpd_flags="-s" # -s "secure" unix domain only
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# Routing daemons
routed=NO routed_flags="-q"
gated=NO gated_flags=""
mrouted=NO mrouted_flags=""
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd). Right now netsetart does not bother you even if you do not have "options INET6" in the kernel.
1999-07-03 07:29:29 +04:00
route6d=NO route6d_flags=""
add sanity check on rtadvd invocation (allowed on IPv6 routers only). add rc.conf entry for rtsold.
1999-09-03 17:40:15 +04:00
rtsold=NO rtsold_flags="" # not really routing daemon...
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# Daemons used to boot other hosts over a network
rarpd=NO rarpd_flags="-a"
bootparamd=NO bootparamd_flags=""
fix formatting
1997-12-03 19:41:53 +03:00
dhcpd=NO dhcpd_flags="-q"
Add dhcrelay startup (allow only if dhcpd isn't started)
1999-03-26 16:10:17 +03:00
dhcrelay=NO dhcrelay_flags=""
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
rbootd=NO rbootd_flags=""
mopd=NO mopd_flags="-a"
add IPv6 configuration (ip6forwarding, rtsol, route6d and rtadvd). Right now netsetart does not bother you even if you do not have "options INET6" in the kernel.
1999-07-03 07:29:29 +04:00
rtadvd=NO rtadvd_flags=""
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Add options to rc.conf and rc to start xfs (x font server) and xdm. Add entries to rc.conf.5. While we're here, note that the domestic kerberos damons are still Kerberos IV, not kerberos version 5.
1997-11-11 05:28:58 +03:00
# X11 daemons:
xfs=NO xfs_flags="" # X11 font server
xdm=NO xdm_flags="" # x11 display manager
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
# YP (NIS) daemons
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
ypbind=NO ypbind_flags=""
ypserv=NO ypserv_flags="-d"
yppasswdd=NO yppasswdd_flags=""
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# NFS daemons and parameters
Only start programms which we started in the previous version (1.15) and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 14:22:24 +04:00
nfs_client=NO # enable client daemons
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
nfsiod_flags="-n 4"
nfs_server=NO # enable server daemons
mountd_flags=""
nfsd_flags="-tun 4"
lockd=NO lockd_flags=""
statd=NO statd_flags=""
amd=NO amd_flags="-l syslog -x error,noinfo,nostats"
amd_dir=/amd # mount dir
amd_master=/etc/amd/master # master map
Re-ordered and added comments to match new rc.conf.5.
1997-03-23 10:57:24 +03:00
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
# Other daemons
Only start programms which we started in the previous version (1.15) and also don't use the PATH with /usr/local/sbin:/usr/local/bin .
1997-08-29 14:22:24 +04:00
rwhod=NO
Split rc.conf variables for starting programs into two: an on/off switch and a set of flags. Get rid of DEFAULT flags entirely. Print warnings if on/off switches are not set, or are set incorrectly. Add a shell function to simplify this on/off switch testing.
1997-08-29 06:24:04 +04:00
kerberos=NO
Separate hardware daemons and add comments.
1998-12-22 16:58:37 +03:00
# Hardware daemons
apmd=NO apmd_flags="" # APM power management daemon.
Screenblank has supported more than sun3 and sparc for a long, long time.
1999-08-17 00:01:03 +04:00
screenblank=NO screenblank_flags="" # wscons and FBIO screenblanker
introduce a "wscons" rc.conf flag and run /etc/rc.wscons from /etc/rc if it is set
1999-03-14 17:04:40 +03:00
# configuration of "wscons" console driver virtual screens
rc.wscons can take arguments, so we shouldn't simply source it but exec in a subshell. Being here, add a prototype wscons_flags variable.
1999-03-17 18:49:47 +03:00
wscons=NO wscons_flags="" # run /etc/rc.wscons