NetBSD/sys/dev/scsipi/scsi_spc.h

572 lines
14 KiB
C
Raw Normal View History

2005-12-11 15:16:03 +03:00
/* $NetBSD: scsi_spc.h,v 1.3 2005/12/11 12:23:50 christos Exp $ */
/*-
* Copyright (c) 2005 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* SCSI Primary Commands (SPC) --
* Commands for all device types
*/
2005-02-27 03:26:58 +03:00
/*
* Largely written by Julian Elischer (julian@tfs.com)
2005-02-27 03:26:58 +03:00
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
* or use in any manner that they see fit as long as this message is kept with
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
2005-02-27 03:26:58 +03:00
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*/
#ifndef _DEV_SCSIPI_SCSI_SPC_H_
#define _DEV_SCSIPI_SCSI_SPC_H_
/*
* EXTENDED COPY
*/
/*
* INQUIRY
*/
/*
* LOG SELECT
*/
/*
* LOG SENSE
*/
/*
* MODE SELECT
*/
#define SCSI_MODE_SELECT_6 0x15
struct scsi_mode_select_6 {
uint8_t opcode;
uint8_t byte2;
#define SMS_SP 0x01 /* save page */
#define SMS_PF 0x10 /* page format (0 = SCSI-1, 1 = SCSI-2) */
uint8_t reserved[2];
uint8_t length;
uint8_t control;
};
#define SCSI_MODE_SELECT_10 0x55
struct scsi_mode_select_10 {
uint8_t opcode;
uint8_t byte2; /* see MODE SELECT (6) */
uint8_t reserved[5];
uint8_t length[2];
uint8_t control;
};
/*
* MODE SENSE
*/
#define SCSI_MODE_SENSE_6 0x1a
struct scsi_mode_sense_6 {
uint8_t opcode;
uint8_t byte2;
#define SMS_DBD 0x08 /* disable block descriptors */
uint8_t page;
#define SMS_PAGE_MASK 0x3f
#define SMS_PCTRL_MASK 0xc0
#define SMS_PCTRL_CURRENT 0x00
#define SMS_PCTRL_CHANGEABLE 0x40
#define SMS_PCTRL_DEFAULT 0x80
#define SMS_PCTRL_SAVED 0xc0
uint8_t reserved;
uint8_t length;
uint8_t control;
};
#define SCSI_MODE_SENSE_10 0x5a
struct scsi_mode_sense_10 {
uint8_t opcode;
uint8_t byte2; /* see MODE SENSE (6) */
#define SMS_LLBAA 0x10
uint8_t page; /* See MODE SENSE (6) */
uint8_t reserved[4];
uint8_t length[2];
uint8_t control;
};
/*
* Page code usage:
* 0x00 Vendor-specific (does not require page format)
* 0x01 - 0x1f Device-type-specific pages
* 0x20 - 0x3e Vendor-specific (page format required)
* 0x3f Return all mode pages
*/
#define SMS_PAGE_ALL_PAGES 0x3f
/*
* Mode parameters are returned in the following format:
*
* Mode parameter header
* Block descriptor(s) [zero or more]
* Page(s) [zero or more, variable-length]
*/
struct scsi_mode_parameter_header_6 {
uint8_t data_length;
uint8_t medium_type;
uint8_t dev_spec;
uint8_t blk_desc_len; /* unused on ATAPI */
};
struct scsi_mode_parameter_header_10 {
uint8_t data_length[2];
uint8_t medium_type;
uint8_t dev_spec;
uint8_t byte5;
#define SMPH_LONGLBA 0x01
uint8_t reserved;
uint8_t blk_desc_len[2];
};
struct scsi_general_block_descriptor {
uint8_t density;
uint8_t nblocks[3];
uint8_t reserved;
uint8_t blklen[3];
};
struct scsi_da_block_descriptor {
uint8_t nblocks[4];
uint8_t density;
uint8_t blklen[3];
};
struct scsi_longlba_block_descriptor {
uint8_t nblocks[8];
uint8_t density;
uint8_t reserved[3];
uint8_t blklen[4];
};
/*
* Header common to all mode parameter pages.
*/
struct scsi_mode_page_header {
uint8_t pg_code;
#define PGCODE_MASK 0x3f /* page code mask */
#define PGCODE_PS 0x80 /* page is saveable */
uint8_t pg_length; /* page length (not including header) */
};
/*
* Control mode page
*/
#define SCSI_CONTROL_MODE_PAGE 0x0a
struct scsi_control_mode_page {
uint8_t pg_code; /* 0x0a */
uint8_t pg_length; /* 0x0a */
uint8_t byte3;
#define SCMP_RLEC 0x01 /* report log exception condition */
#define SCMP_GLTSD 0x02 /* global logging target save disable */
#define SCMP_TST_mask 0x7 /* task set type */
#define SCMP_TST_shift 5
#define SCMP_TST_ALL_INIT 0 /* per LU for all initiators */
#define SCMP_TST_PER_INIT 1 /* per initiator per LU */
uint8_t queue_params;
#define SCMP_DQue 0x01 /* disable queueing */
#define SCMP_QErr_mask 0x3 /* queue error management */
#define SCMP_QErr_shift 1
#define SCMP_QAM_mask 0xf /* queue algorithm modifier */
#define SCMP_QAM_shift 4
#define SCMP_QAM_RESTRICTED 0x0 /* restricted reordering allowed */
#define SCMP_QAM_UNRESTRICTED 0x1 /* unrestricted reordering allowed */
/* 0x2 - 0x7 Reserved */
/* 0x8 - 0xf Vendor-specific */
uint8_t byte5;
#define SCMP_EAERP 0x01
#define SCMP_UAAERP 0x02
#define SCMP_RAERP 0x04
#define SCMP_SWP 0x08
#define SCMP_RAC 0x40
#define SCMP_TAS 0x80
uint8_t byte6;
#define SCMP_AM_mask 0x7 /* autload mode */
#define SCMP_AM_FULL 0
#define SCMP_AM_AUXMEM 1
#define SCMP_AM_NOLOAD 2
uint8_t rahp[2]; /* ready aer holdoff period */
uint8_t btp[2]; /* busy timeout period */
uint8_t estct[2]; /* extended self-test completion time */
};
/*
* Disconnect-reconnect page
*/
#define SCSI_DISCONNECT_RECONNECT_PAGE 0x02
struct scsi_disconnect_reconnect_page {
uint8_t pg_code; /* 0x02 */
uint8_t pg_length; /* 0x0e */
uint8_t buffer_full_ratio;
uint8_t buffer_empty_ratio;
uint8_t bus_inactivity_limit[2];
uint8_t disconnect_time_limit[2];
uint8_t connect_time_limit[2];
uint8_t maximum_burst_size[2];
uint8_t flags;
#define SDRP_DTDC_mask 0x7 /* data transfer disconnect control */
#define SDRP_DImm 0x08
#define SDRP_FA_mask 0x7
#define SDRP_FA_shift 4
#define SDRP_EMDP 0x80
uint8_t reserved;
uint8_t first_burst_size[2];
};
/*
* Informational exceptions control page
*/
#define SCSI_INFORMATIONAL_EXCEPTIONS_CONTROL_PAGE 0x1c
struct scsi_informational_exceptions_control_page {
uint8_t pg_code; /* 0x1c */
uint8_t pg_length; /* 0x0a */
uint8_t byte3;
#define SIECP_LogErr 0x01
#define SIECP_TEST 0x04
#define SIECP_DExcpt 0x08
#define SIECP_EWasc 0x10
#define SIECP_EBF 0x20
#define SIECP_PERF 0x80
uint8_t byte4;
#define SIECP_MRIE_mask 0xf /* method of reporting
informational exceptions */
#define SIECP_MRIE_NO_REPORTING 0x00
#define SIECP_MRIE_ASYNC_EVENT 0x01
#define SIECP_MRIE_UNIT_ATN 0x02
#define SIECP_MRIE_COND_RECOV_ERR 0x03
#define SIECP_MRIE_UNCOND_RECOV_ERR 0x04
#define SIECP_MRIE_NO_SENSE 0x05
#define SIECP_MRIE_ON_REQUEST 0x06
/* 0x07 - 0x0b reserved */
/* 0x0c - 0x0f Vendor-specific */
uint8_t interval_timer[2];
uint8_t report_count[2];
};
/*
* Power condition page
*/
#define SCSI_POWER_CONDITION_PAGE 0x1a
struct scsi_power_condition_page {
uint8_t pg_code; /* 0x1a */
uint8_t pg_length; /* 0x0a */
uint8_t reserved;
uint8_t byte4;
#define SPCP_STANDBY 0x01
#define SPCP_IDLE 0x02
uint8_t idle_timer[2]; /* 100ms increments */
uint8_t standby_timer[2]; /* 100ms increments */
};
/*
* Protocol specific LUN page
*/
#define SCSI_PROTOCOL_SPECIFIC_LUN_PAGE 0x18
struct scsi_protocol_specific_lun_page {
uint8_t pg_code; /* 0x18 */
uint8_t pg_length; /* variable */
uint8_t byte3;
#define SPSLP_PROTOCOL_mask 0xf
#define SPSLP_PROTOCOL_FCP 0x00 /* Fibre Channel */
#define SPSLP_PROTOCOL_SPI 0x01 /* parallel SCSI */
#define SPSLP_PROTOCOL_SSA 0x02 /* SSA-S2P or SSA-S3P */
#define SPSLP_PROTOCOL_SBP2 0x03 /* IEEE 1394 */
#define SPSLP_PROTOCOL_SRP 0x04 /* SCSI RDMA */
#define SPSLP_PROTOCOL_ISCSI 0x05 /* iSCSI */
/* protocol specific mode parameters follow */
};
/*
* Protocol specific port page
*/
#define SCSI_PROTOCOL_SPECIFIC_PORT_PAGE 0x19
struct scsi_protocol_specific_port_page {
uint8_t pg_code; /* 0x18 */
uint8_t pg_length; /* variable */
uint8_t byte3; /* see SCSI PROTOCOL SPECIFIC LUN PAGE */
/* protocol specific mode parameters follow */
};
/*
* PERSISTENT RESERVE IN
*/
/*
* PERSISTENT RESERVE OUT
*/
/*
* PREVENT ALLOW MEDIUM REMOVAL
*/
#define SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
struct scsi_prevent_allow_medium_removal {
uint8_t opcode;
uint8_t byte2;
uint8_t reserved[2];
uint8_t how;
#define SPAMR_ALLOW 0x00
#define SPAMR_PREVENT_DT 0x01
#define SPAMR_PREVENT_MC 0x02
#define SPAMR_PREVENT_ALL 0x03
uint8_t control;
};
/*
* READ BUFFER
*/
/*
* RECEIVE COPY RESULTS
*/
/*
* RECEIVE DIAGNOSTIC RESULTS
*/
/*
* RESERVE / RELEASE
*/
#define SCSI_RESERVE_6 0x16
#define SCSI_RELEASE_6 0x17
struct scsi_reserve_release_6 {
uint8_t opcode;
uint8_t byte2;
uint8_t obsolete;
uint8_t reserved[2];
uint8_t control;
};
#define SCSI_RESERVE_10 0x56
#define SCSI_RELEASE_10 0x57
struct scsi_reserve_release_10 {
uint8_t opcode;
uint8_t byte2;
#define SR_LongID 0x02
#define SR_3rdPty 0x10
uint8_t obsolete;
uint8_t thirdpartyid;
uint8_t reserved[3];
uint8_t paramlen[2];
uint8_t control;
};
struct scsi_reserve_release_10_idparam {
uint8_t thirdpartyid[8];
};
/*
* REPORT DEVICE IDENTIFIER
*/
/*
* REPORT LUNS
*/
/*
* REQUEST SENSE
*/
#define SCSI_REQUEST_SENSE 0x03
struct scsi_request_sense {
uint8_t opcode;
uint8_t byte2;
uint8_t reserved[2];
uint8_t length;
uint8_t control;
};
struct scsi_sense_data {
/* 1*/ uint8_t response_code;
#define SSD_RCODE(x) ((x) & 0x7f)
#define SSD_RCODE_CURRENT 0x70
#define SSD_RCODE_DEFERRED 0x71
#define SSD_RCODE_VALID 0x80
/* 2*/ uint8_t segment; /* obsolete */
/* 3*/ uint8_t flags;
#define SSD_SENSE_KEY(x) ((x) & 0x0f)
#define SSD_ILI 0x20
#define SSD_EOM 0x40
#define SSD_FILEMARK 0x80
/* 7*/ uint8_t info[4];
/* 8*/ uint8_t extra_len;
/*12*/ uint8_t csi[4];
/*13*/ uint8_t asc;
/*14*/ uint8_t ascq;
/*15*/ uint8_t fru;
union {
uint8_t sks_bytes[3];
/* ILLEGAL REQUEST */
struct {
uint8_t byte0;
#define SSD_SKS_FP_BIT(x) ((x) & 0x7)
#define SSD_SKS_FP_BPV 0x08
#define SSK_SKS_FP_CD 0x40 /* 1=command, 0=data */
uint8_t val[2];
} field_pointer;
/* RECOVERED ERROR, HARDWARE ERROR, MEDIUM ERROR */
struct {
uint8_t byte0;
uint8_t val[2];
} actual_retry_count;
/* NOT READY, NO SENSE */
struct {
uint8_t byte0;
uint8_t val[2];
} progress_indication;
/* COPY ABORTED */
struct {
uint8_t byte0;
#define SSD_SKS_SP_BIT(x) ((x) & 0x7)
#define SSD_SKS_SP_BPV 0x08
#define SSD_SKS_SP_SD 0x20 /* 0=param list, 1=segment desc */
uint8_t val[2];
} segment_pointer;
/*18*/ } sks;
#define SSD_SKSV 0x80 /* byte0 of sks field */
/*32*/ uint8_t extra_bytes[14]; /* really variable length */
};
/*
* Sense bytes described by the extra_len field start at csi[], and can
* only continue up to the end of the 32-byte sense structure that we
* have defined (which might be too short for some cases).
*/
#define SSD_ADD_BYTES_LIM(sp) \
((((int)(sp)->extra_len) < (int)sizeof(struct scsi_sense_data) - 8) ? \
(sp)->extra_len : sizeof(struct scsi_sense_data) - 8)
#define SKEY_NO_SENSE 0x00
#define SKEY_RECOVERED_ERROR 0x01
#define SKEY_NOT_READY 0x02
#define SKEY_MEDIUM_ERROR 0x03
#define SKEY_HARDWARE_ERROR 0x04
#define SKEY_ILLEGAL_REQUEST 0x05
#define SKEY_UNIT_ATTENTION 0x06
#define SKEY_DATA_PROTECT 0x07
#define SKEY_BLANK_CHECK 0x08
#define SKEY_VENDOR_SPECIFIC 0x09
#define SKEY_COPY_ABORTED 0x0a
#define SKEY_ABORTED_COMMAND 0x0b
#define SKEY_EQUAL 0x0c /* obsolete */
#define SKEY_VOLUME_OVERFLOW 0x0d
#define SKEY_MISCOMPARE 0x0e
/* 0x0f reserved */
/* XXX This is not described in SPC-2. */
struct scsi_sense_data_unextended {
uint8_t response_code;
uint8_t block[3];
};
/*
* SEND DIAGNOSTIC
*/
#define SCSI_SEND_DIAGNOSTIC 0x1d
struct scsi_send_diagnostic {
uint8_t opcode;
uint8_t byte2;
#define SSD_UnitOffL 0x01
#define SSD_DevOffL 0x02
#define SSD_SelfTest 0x04 /* standard self-test */
#define SSD_PF 0x10 /* results in page format */
#define SSD_CODE(x) ((x) << 5)
/*
* Codes:
*
* 0 This value shall be used when the SelfTest bit is
* set to one or if the SEND DIAGNOSTIC command is not
* invoking one of the other self-test functions such
* as enclosure services or the Translate Address page.
*
* 1 Background short self-test. Parameter length is 0.
*
* 2 Background extended self-test. Parameter length is 0.
*
* 4 Abort background self-test. Parameter length is 0.
*
* 5 Foreground short self-test. Parameter length is 0.
*
* 6 Foreground extended self-test. Parameter length is 0.
*/
uint8_t reserved;
uint8_t paramlen[2];
uint8_t control;
};
/*
* SET DEVICE IDENTIFIER
*/
/*
* TEST UNIT READY
*/
#define SCSI_TEST_UNIT_READY 0x00
struct scsi_test_unit_ready {
uint8_t opcode;
uint8_t byte2;
uint8_t reserved[3];
uint8_t control;
};
/*
* WRITE BUFFER
*/
#endif /* _DEV_SCSIPI_SCSI_SPC_H_ */