NetBSD/gnu/dist/gdb/remote-vxmips.c

/* MIPS-dependent portions of the RPC protocol
   used with a VxWorks target 

Contributed by Wind River Systems.

This file is part of GDB.

This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */

#include <stdio.h>
#include "defs.h"

#include "vx-share/regPacket.h"  
#include "frame.h"
#include "inferior.h"
#include "wait.h"
#include "target.h"
#include "gdbcore.h"
#include "command.h"
#include "symtab.h"
#include "symfile.h"		/* for struct complaint */

#include "gdb_string.h"
#include <errno.h>
#include <signal.h>
#include <fcntl.h>
#include <sys/types.h>
#include <sys/time.h>
#include <sys/socket.h>
#include <rpc/rpc.h>
#include <sys/time.h>		/* UTek's <rpc/rpc.h> doesn't #incl this */
#include <netdb.h>
#include "vx-share/ptrace.h"
#include "vx-share/xdr_ptrace.h"
#include "vx-share/xdr_ld.h"
#include "vx-share/xdr_rdb.h"
#include "vx-share/dbgRpcLib.h"

/* get rid of value.h if possible */
#include <value.h>
#include <symtab.h>

/* Flag set if target has fpu */

extern int target_has_fp;

/* Generic register read/write routines in remote-vx.c.  */

extern void net_read_registers ();
extern void net_write_registers ();

/* Read a register or registers from the VxWorks target.
   REGNO is the register to read, or -1 for all; currently,
   it is ignored.  FIXME look at regno to improve efficiency.  */

void
vx_read_register (regno)
     int regno;
{
  char mips_greg_packet[MIPS_GREG_PLEN];
  char mips_fpreg_packet[MIPS_FPREG_PLEN];

  /* Get general-purpose registers.  */

  net_read_registers (mips_greg_packet, MIPS_GREG_PLEN, PTRACE_GETREGS);

  /* this code copies the registers obtained by RPC 
     stored in a structure(s) like this :
     
    	Register(s)		Offset(s)
   	gp 0-31			0x00
   	hi			0x80
   	lo			0x84
   	sr			0x88
   	pc			0x8c
    
     into a stucture like this:
   	
   	0x00	GP 0-31
   	0x80   	SR
   	0x84	LO
   	0x88	HI
   	0x8C	BAD    		--- Not available currently
   	0x90	CAUSE    	--- Not available currently
   	0x94	PC
   	0x98	FP 0-31
   	0x118	FCSR
   	0x11C	FIR    		--- Not available currently
   	0x120	FP	    	--- Not available currently
   
     structure is 0x124 (292) bytes in length */
   
  /* Copy the general registers.  */
  
  bcopy (&mips_greg_packet[MIPS_R_GP0], &registers[0], 32 * MIPS_GREG_SIZE);
  
  /* Copy SR, LO, HI, and PC.  */
  
  bcopy (&mips_greg_packet[MIPS_R_SR],
         &registers[REGISTER_BYTE (PS_REGNUM)], MIPS_GREG_SIZE);
  bcopy (&mips_greg_packet[MIPS_R_LO],
         &registers[REGISTER_BYTE (LO_REGNUM)], MIPS_GREG_SIZE);
  bcopy (&mips_greg_packet[MIPS_R_HI],
         &registers[REGISTER_BYTE (HI_REGNUM)], MIPS_GREG_SIZE);
  bcopy (&mips_greg_packet[MIPS_R_PC],
         &registers[REGISTER_BYTE (PC_REGNUM)], MIPS_GREG_SIZE);
  
  /* If the target has floating point registers, fetch them.
     Otherwise, zero the floating point register values in
     registers[] for good measure, even though we might not
     need to.  */
    
  if (target_has_fp)
    {
      net_read_registers (mips_fpreg_packet, MIPS_FPREG_PLEN,
			  PTRACE_GETFPREGS);

      /* Copy the floating point registers.  */

      bcopy (&mips_fpreg_packet[MIPS_R_FP0], 
	     &registers[REGISTER_BYTE (FP0_REGNUM)],
	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);

      /* Copy the floating point control/status register (fpcsr).  */

      bcopy (&mips_fpreg_packet[MIPS_R_FPCSR], 
	     &registers[REGISTER_BYTE (FCRCS_REGNUM)],
	     REGISTER_RAW_SIZE (FCRCS_REGNUM));
    }	
  else
    {	
      bzero ((char *) &registers[REGISTER_BYTE (FP0_REGNUM)],
	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);
      bzero ((char *) &registers[REGISTER_BYTE (FCRCS_REGNUM)],
	     REGISTER_RAW_SIZE (FCRCS_REGNUM));
    }		

  /* Mark the register cache valid.  */

  registers_fetched ();
}

/* Store a register or registers into the VxWorks target.
   REGNO is the register to store, or -1 for all; currently,
   it is ignored.  FIXME look at regno to improve efficiency.  */

vx_write_register (regno)
     int regno;
{
  char mips_greg_packet[MIPS_GREG_PLEN];
  char mips_fpreg_packet[MIPS_FPREG_PLEN];

  /* Store general registers.  */

  bcopy (&registers[0], &mips_greg_packet[MIPS_R_GP0], 32 * MIPS_GREG_SIZE);
  
  /* Copy SR, LO, HI, and PC.  */
  
  bcopy (&registers[REGISTER_BYTE (PS_REGNUM)],
         &mips_greg_packet[MIPS_R_SR], MIPS_GREG_SIZE);
  bcopy (&registers[REGISTER_BYTE (LO_REGNUM)],
         &mips_greg_packet[MIPS_R_LO], MIPS_GREG_SIZE);
  bcopy (&registers[REGISTER_BYTE (HI_REGNUM)],
         &mips_greg_packet[MIPS_R_HI], MIPS_GREG_SIZE);
  bcopy (&registers[REGISTER_BYTE (PC_REGNUM)],
         &mips_greg_packet[MIPS_R_PC], MIPS_GREG_SIZE);
  
  net_write_registers (mips_greg_packet, MIPS_GREG_PLEN, PTRACE_SETREGS);

  /* Store floating point registers if the target has them.  */

  if (target_has_fp)
    {
      /* Copy the floating point data registers.  */

      bcopy (&registers[REGISTER_BYTE (FP0_REGNUM)],
	     &mips_fpreg_packet[MIPS_R_FP0], 
	     REGISTER_RAW_SIZE (FP0_REGNUM) * 32);

      /* Copy the floating point control/status register (fpcsr).  */

      bcopy (&registers[REGISTER_BYTE (FCRCS_REGNUM)],
	     &mips_fpreg_packet[MIPS_R_FPCSR], 
	     REGISTER_RAW_SIZE (FCRCS_REGNUM));

      net_write_registers (mips_fpreg_packet, MIPS_FPREG_PLEN,
			   PTRACE_SETFPREGS);
    }
}