Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e32643d8e3
NetBSD/sys/arch/amiga/conf/DRACO

170 lines
5.1 KiB
Plaintext
Raw Normal View History

Get rid of std.draco file. Amiga specific devices must be named in GENERIC, too. While here, add vnd pseudo-devices to DRACO.
1998-02-05 23:07:15 +03:00
# $NetBSD: DRACO,v 1.21 1998/02/05 20:07:17 is Exp $
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
# Macro System GmbH "DraCo", currently 68060-only until FPE is integrated.
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
# this will be replace by std.amiga soon:
Get rid of std.draco file. Amiga specific devices must be named in GENERIC, too. While here, add vnd pseudo-devices to DRACO.
1998-02-05 23:07:15 +03:00
include "arch/amiga/conf/std.amiga"
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
maxusers 8
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options RTC_OFFSET=0
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
#
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# mainboards to support (in addition to Amiga)
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options DRACO
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# processors this kernel should support
#
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options "M68060" # support for 060
options "M060SP" # MC68060 software support (Required for 060)
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# Networking options
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options INET # IP networking support (Required)
#options ISO # ISO Networking support
#options TPIP # ARGO TP networking support
#options CCITT # CCITT X.25
#options NS # Xerox XNS
#options EON # ISO CLNL over IP
#options GATEWAY # Packet forwarding
#options DIRECTED_BROADCAST # Broadcast across subnets
#options NSIP # XNS over IP
Get rid of std.draco file. Amiga specific devices must be named in GENERIC, too. While here, add vnd pseudo-devices to DRACO.
1998-02-05 23:07:15 +03:00
#options MROUTING
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# File system related options
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options QUOTA # Disk quotas for local disks
options NFSSERVER # Network File System server side code
options FIFO # FIFO operations on vnodes (Recommended)
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# File systems
#
Adopt for new file system and root spec grammar.
1997-01-31 04:45:40 +03:00
file-system FFS # Berkeley fast file system
file-system MFS # Memory based filesystem
file-system NFS # Network File System client side code
file-system PROCFS # Process filesystem
file-system KERNFS # Kernel parameter filesystem (Recommended)
file-system FDESC # /dev/fd filesystem
file-system NULLFS # Loopback filesystem
file-system ADOSFS # AmigaDOS file system
file-system "CD9660" # ISO 9660 file system, with Rock Ridge
#file-system PORTAL # Portal filesystem
file-system MSDOSFS # MS-DOS filesystem
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# Compatability options for various existing systems
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options COMPAT_12
Add COMPAT_13.
1997-12-01 17:52:51 +03:00
options COMPAT_13
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
#options "COMPAT_10" # compatability with older NetBSD release
#options COMPAT_SUNOS # Support to run Sun (m68k) executables
options "TCP_COMPAT_42" # Use 4.2 BSD style TCP
options "COMPAT_NOMID" # allow nonvalid machine id executables
#options COMPAT_HPUX # HP300 compatability
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# Support for System V IPC facilities.
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options SYSVSHM # System V-like shared memory
options SYSVMSG # System V-like messages
options SYSVSEM # System V-like semaphores
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# Support for various kernel options
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options LKM # Loadable kernel modules
options KTRACE # Add kernel tracing system call
options DIAGNOSTIC # Add additional error checking code
options "NKMEMCLUSTERS=256" # Size of kernel malloc area
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
# Misc. debugging options
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options DEBUG # Add debugging statements
options DDB # Kernel debugger
#options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
#options SYSCALL_DEBUG # debug all syscalls.
#options SCSIDEBUG # Add SCSI debugging statements
#options PANICBUTTON # Forced crash via keypress (???)
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#
# Amiga specific options
#
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options MACHINE_NONCONTIG # Non-contiguous memory support
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# higly recommended for DraCo
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options RETINACONSOLE # enable code to allow retina to be console
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
#options "KFONT_8X11" # 8x11 font
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# This is how you specify the blitting speed, higher values may speed up blits
# a littel bit. If you raise this value too much some trash may appear.
# the commented version is the default.
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
#options RH_MEMCLK 61000000
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# this option enables the 64 bit sprite which doesn't seems to be work
# for quite a few people. E.g. The cursor sprite will turn to a block
# when moved to the top of the screen in X.
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
#options RH_64BIT_SPRITE
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
# enables fast scroll code appears to now work on 040 systems.
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
#options RETINA_SPEED_HACK
Disable the Hardwarecursor on the RetinaZ3 to solve the problems with wrong mouse jumps under X11. Remove the not working options KGDB from DRACO and GENERIC and added an option to enable the HWC for the RetinaZ3
1996-08-11 13:48:17 +04:00
# enables the Hardwarecursor which does not work on some systems.
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>'
1997-11-17 04:57:23 +03:00
options RH_HARDWARECURSOR
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
grfrh0 at zbus0 # Altais looks just like the Retina Z3
grf2 at grfrh0
ite2 at grf2 # terminal emulators for grf's
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
msc0 at zbus0 # A2232 MSC multiport serial.
mfc0 at zbus0 # MultiFaceCard I/O board
mfcs0 at mfc0 unit 0 # MFC serial
mfcs1 at mfc0 unit 1 # MFC serial
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
#mfcp0 at mfc0 unit 0 # MFC parallel [not available yet]
#mfc1 at zbus0 # MultiFaceCard 2nd I/O board
#mfcs2 at mfc1 unit 0
#mfcs3 at mfc1 unit 1
#mfcp1 at mfc1 unit 0
Make the DraCo hardware clock an autoconfiguration device.
1997-07-18 03:29:28 +04:00
drbbc0 at mainbus0 # DraCo battery backed clock
Define supio, a direct bus with a single locator, the port number. This is for "standard PC i/o stuff" at known and constant locations, e.g. when multi-io chips are used on non-ISA mainboards. Implement drsupio.c, the DraCo version of this. Attach the generic com.c to this bus. Remove the old drcom hack.
1997-08-27 23:32:47 +04:00
drsupio0 at mainbus0 # DraCo superio chip
com* at drsupio? port ? # DraCo serial
First part of splitting lpt.c, and the NetBSD/Amiga "supio" frontend. Needs a bit more work to allow an ISA frontend.
1997-09-28 02:44:11 +04:00
lpt0 at drsupio? port ? # DraCo parallel
The DraCo has had a com driver for quite a while.
1997-03-30 15:06:40 +04:00
Driver for the VMC HyperCom3/zbus and the VMC HyperCom4. lpt on HyperCom3 isn't supported yet.
1997-10-19 03:31:32 +04:00
hyper* at zbus? # zbus HyperCom 3/4
com* at hyper? port ? # Hypercom serial
Remove the ae entries for the Ariadne, it's now supported bye the le driver
1997-03-28 00:21:11 +03:00
le* at zbus0 # Lance ethernet.
Bring in changes from the 1.2 branch which where only in the release
1996-08-11 16:27:50 +04:00
ed0 at zbus0 # dp8390 ethernet
es0 at zbus0 # SMC 91C90 ethernet
qn0 at zbus0 # quicknet ethernet
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
bah* at zbus0 # C= arcnet
# scsi stuff
drsc0 at mainbus0 # DraCo mainboard scsi
scsibus* at drsc0
# each hard drive from low target to high
# will configure to the next available sd unit number
sd* at scsibus? target ? lun ? # scsi disks
st* at scsibus? target ? lun ? # scsi tapes
cd* at scsibus? target ? lun ? # scsi cd's
- Move SWAPPAGER, VNODEPAGER and DEVPAGER to std.draco. - Remove not working KGDB. - Remove unused PANICWAIT. - Add ch and uk devices.
1996-12-20 22:18:16 +03:00
ss* at scsibus? target ? lun ? # scsi scanner
ch* at scsibus? target ? lun ? # scsi autochangers
uk* at scsibus? target ? lun ? # scsi unknown
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
pseudo-device pty 16 # pseudo terminals
pseudo-device loop # network loopback
pseudo-device bpfilter 2 # berkeley packet filters
pseudo-device tun 2
Define supio, a direct bus with a single locator, the port number. This is for "standard PC i/o stuff" at known and constant locations, e.g. when multi-io chips are used on non-ISA mainboards. Implement drsupio.c, the DraCo version of this. Attach the generic com.c to this bus. Remove the old drcom hack.
1997-08-27 23:32:47 +04:00
pseudo-device ppp 2 # ppp protocol network drivers
Get rid of std.draco file. Amiga specific devices must be named in GENERIC, too. While here, add vnd pseudo-devices to DRACO.
1998-02-05 23:07:15 +03:00
pseudo-device vnd 4 # pseudo disk on file
First part of M68060 and DraCo support. * for the M68060 part: store buffer and branch target cache aren't enabled yet (this needs cleanup of lots of locore.s code which is a maze of little passages, all a little different) (and it wasn't yet tested in an accellerated Amiga, only in the DraCo). I've included a workaround for 2 of the CPU bugs in chips with Masks 1F43G and earlier, but didn't bother to deal with the can of worms in the [0-3]D11W chips. Be sure to get "68060 rev. 1" or more reported at kernel startup time, or at least mention it (or the mask revision, if available) when reporting problems. * for the DraCo: only machines with a CIA timer. I assigned machine id 32000+nn (0x7Dnn), where n is the machine readable Quicklogic custom chip revision (also printed at boot time). "Guaranteed to work" up to rev. 3, newer DraCo's aren't guaranteed to have any CIA (we don't have a driver for the new timer yet). Supported are: - MF-II keyboards on the native interface and A3000 keyboards via the CIA. - builtin SCSI interface (yet another instance of siop) - CIA timer. - Zorro II devices which don't do DMA (don't get mapped to Zorro II address space in the DraCo) - "local bus" devices which are autoconfigured by the boot rom (should be all); only an Altais driver is there (looks like a Retina Z3) Not yet supported are: - native timer of newer machines. - Real Time Clock. - serial, parallel + floppy on the SuperIO chip (that is also: no mouse) XXX You need an enhanced boot loader, which will committed in a few days. XXX std.draco should and will go away.
1996-05-10 00:30:30 +04:00
Adopt for new file system and root spec grammar.
1997-01-31 04:45:40 +03:00
config netbsd root on ? type ?
Reference in New Issue Copy Permalink