NetBSD/usr.bin/mail/support.c

748 lines
15 KiB
C
Raw Normal View History

/* $NetBSD: support.c,v 1.21 2008/04/24 01:27:07 christos Exp $ */
1993-03-21 12:45:37 +03:00
/*
1994-06-29 09:09:04 +04:00
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
1993-03-21 12:45:37 +03:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1993-03-21 12:45:37 +03:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
1993-03-21 12:45:37 +03:00
#ifndef lint
#if 0
static char sccsid[] = "@(#)aux.c 8.1 (Berkeley) 6/6/93";
#else
__RCSID("$NetBSD: support.c,v 1.21 2008/04/24 01:27:07 christos Exp $");
#endif
1993-03-21 12:45:37 +03:00
#endif /* not lint */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include <stdarg.h>
#include <util.h>
1993-03-21 12:45:37 +03:00
#include "rcv.h"
1994-06-29 09:09:04 +04:00
#include "extern.h"
#include "mime.h"
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include "thread.h"
1993-03-21 12:45:37 +03:00
/*
* Mail -- a mail program
*
* Auxiliary functions.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
1993-03-21 12:45:37 +03:00
/*
* Return a pointer to a dynamic copy of the argument.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC char *
2002-03-02 17:59:35 +03:00
savestr(const char *str)
1993-03-21 12:45:37 +03:00
{
char *new;
2005-07-20 03:07:10 +04:00
size_t size = strlen(str) + 1;
1993-03-21 12:45:37 +03:00
if ((new = salloc(size)) != NULL)
2005-07-20 03:07:10 +04:00
(void)memmove(new, str, size);
1993-03-21 12:45:37 +03:00
return new;
}
/*
1994-06-29 09:09:04 +04:00
* Make a copy of new argument incorporating old one.
1993-03-21 12:45:37 +03:00
*/
static char *
2002-03-02 17:59:35 +03:00
save2str(char *str, char *old)
1994-06-29 09:09:04 +04:00
{
char *new;
2005-07-20 03:07:10 +04:00
size_t newsize = strlen(str) + 1;
size_t oldsize = old ? strlen(old) + 1 : 0;
1994-06-29 09:09:04 +04:00
if ((new = salloc(newsize + oldsize)) != NULL) {
1994-06-29 09:09:04 +04:00
if (oldsize) {
2005-07-20 03:07:10 +04:00
(void)memmove(new, old, oldsize);
1994-06-29 09:09:04 +04:00
new[oldsize - 1] = ' ';
}
2005-07-20 03:07:10 +04:00
(void)memmove(new + oldsize, str, newsize);
1994-06-29 09:09:04 +04:00
}
return new;
}
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Like asprintf(), but with result salloc-ed rather than malloc-ed.
*/
PUBLIC int
sasprintf(char **ret, const char *format, ...)
{
int rval;
char *p;
va_list args;
va_start(args, format);
rval = evasprintf(&p, format, args);
*ret = savestr(p);
free(p);
va_end(args);
return rval;
}
struct set_m_flag_args_s {
int and_bits;
int xor_bits;
};
static int
set_m_flag_core(struct message *mp, void *v)
{
struct set_m_flag_args_s *args;
args = v;
mp->m_flag &= args->and_bits;
mp->m_flag ^= args->xor_bits;
return 0;
}
PUBLIC struct message *
set_m_flag(int msgnum, int and_bits, int xor_bits)
{
struct message *mp;
struct set_m_flag_args_s args;
mp = get_message(msgnum);
args.and_bits = and_bits;
args.xor_bits = xor_bits;
(void)thread_recursion(mp, set_m_flag_core, &args);
return mp;
}
1993-03-21 12:45:37 +03:00
/*
* Touch the named message by setting its MTOUCH flag.
* Touched messages have the effect of not being sent
* back to the system mailbox on exit.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
2002-03-02 17:59:35 +03:00
touch(struct message *mp)
1993-03-21 12:45:37 +03:00
{
mp->m_flag |= MTOUCH;
if ((mp->m_flag & MREAD) == 0)
mp->m_flag |= MREAD|MSTATUS;
}
/*
* Test to see if the passed file name is a directory.
* Return true if it is.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2005-07-19 05:38:38 +04:00
isdir(const char name[])
1993-03-21 12:45:37 +03:00
{
struct stat sbuf;
if (stat(name, &sbuf) < 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
return S_ISDIR(sbuf.st_mode);
1993-03-21 12:45:37 +03:00
}
/*
* Count the number of arguments in the given string raw list.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
argcount(char **argv)
1993-03-21 12:45:37 +03:00
{
char **ap;
1993-03-21 12:45:37 +03:00
for (ap = argv; *ap++ != NULL; /*EMPTY*/)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
1993-03-21 12:45:37 +03:00
return ap - argv - 1;
}
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Check whether the passed line is a header line of
* the desired breed. Return the field body, or NULL.
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static char*
ishfield(const char linebuf[], char *colon, const char field[])
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *cp = colon;
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*cp = 0;
if (strcasecmp(linebuf, field) != 0) {
*cp = ':';
return NULL;
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*cp = ':';
for (cp++; is_WSP(*cp); cp++)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
return cp;
1993-03-21 12:45:37 +03:00
}
/*
* Return the next header field found in the given message.
* Return >= 0 if something found, < 0 elsewise.
* "colon" is set to point to the colon in the header.
* Must deal with \ continuations & other such fraud.
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*
* WARNING - do not call this outside hfield() or decoding will not
* get done.
1993-03-21 12:45:37 +03:00
*/
static int
2002-03-02 17:59:35 +03:00
gethfield(FILE *f, char linebuf[], int rem, char **colon)
1993-03-21 12:45:37 +03:00
{
char line2[LINESIZE];
char *cp, *cp2;
int c;
1993-03-21 12:45:37 +03:00
for (;;) {
if (--rem < 0)
return -1;
if ((c = mail_readline(f, linebuf, LINESIZE)) <= 0)
1993-03-21 12:45:37 +03:00
return -1;
for (cp = linebuf;
isprint((unsigned char)*cp) && *cp != ' ' && *cp != ':';
1993-03-21 12:45:37 +03:00
cp++)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
1993-03-21 12:45:37 +03:00
if (*cp != ':' || cp == linebuf)
continue;
/*
* I guess we got a headline.
* Handle wraparounding
*/
*colon = cp;
cp = linebuf + c;
for (;;) {
while (--cp >= linebuf && is_WSP(*cp))
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
1993-03-21 12:45:37 +03:00
cp++;
if (rem <= 0)
break;
2005-07-20 03:07:10 +04:00
(void)ungetc(c = getc(f), f);
if (!is_WSP(c))
1993-03-21 12:45:37 +03:00
break;
if ((c = mail_readline(f, line2, LINESIZE)) < 0)
1993-03-21 12:45:37 +03:00
break;
rem--;
cp2 = skip_WSP(line2);
1993-03-21 12:45:37 +03:00
c -= cp2 - line2;
if (cp + c >= linebuf + LINESIZE - 2)
break;
*cp++ = ' ';
2005-07-20 03:07:10 +04:00
(void)memmove(cp, cp2, (size_t)c);
1993-03-21 12:45:37 +03:00
cp += c;
}
*cp = 0;
return rem;
}
/* NOTREACHED */
}
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Return the desired header line from the passed message
* pointer (or NULL if the desired header field is not available).
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC char *
hfield(const char field[], const struct message *mp)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
FILE *ibuf;
char linebuf[LINESIZE];
int lc;
char *headerfield;
char *colon, *oldhfield = NULL;
#ifdef MIME_SUPPORT
int decode;
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
decode = value(ENAME_MIME_DECODE_MSG) &&
value(ENAME_MIME_DECODE_HDR);
#endif
ibuf = setinput(mp);
if ((lc = mp->m_lines - 1) < 0)
return NULL;
if (mail_readline(ibuf, linebuf, LINESIZE) < 0)
return NULL;
while (lc > 0) {
if ((lc = gethfield(ibuf, linebuf, lc, &colon)) < 0)
return oldhfield;
#ifdef MIME_SUPPORT
if ((headerfield = ishfield(linebuf, colon, field)) != NULL) {
char linebuf2[LINESIZE];
if (decode)
headerfield = mime_decode_hfield(linebuf2,
sizeof(linebuf2), linebuf, headerfield);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
oldhfield = save2str(headerfield, oldhfield);
}
#else
if ((headerfield = ishfield(linebuf, colon, field)) != NULL)
oldhfield = save2str(headerfield, oldhfield);
#endif
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return oldhfield;
1993-03-21 12:45:37 +03:00
}
/*
* Copy a string, lowercasing it as we go.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
2005-07-19 05:38:38 +04:00
istrcpy(char *dest, const char *src)
1993-03-21 12:45:37 +03:00
{
do {
*dest++ = tolower((unsigned char)*src);
1993-03-21 12:45:37 +03:00
} while (*src++ != 0);
}
/*
* The following code deals with input stacking to do source
* commands. All but the current file pointer are saved on
* the stack.
*/
static int ssp; /* Top of file stack */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static struct sstack {
1993-03-21 12:45:37 +03:00
FILE *s_file; /* File we were in. */
int s_cond; /* Saved state of conditionals */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef NEW_CONDITIONAL
struct cond_stack_s *s_cond_stack; /* Saved conditional stack */
#endif
1993-03-21 12:45:37 +03:00
int s_loading; /* Loading .mailrc, etc. */
} sstack[NOFILE];
/*
* Pushdown current input file and switch to a new one.
* Set the global flag "sourcing" so that others will realize
* that they are no longer reading from a tty (in all probability).
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
source(void *v)
1993-03-21 12:45:37 +03:00
{
char **arglist = v;
1993-03-21 12:45:37 +03:00
FILE *fi;
2005-07-19 05:38:38 +04:00
const char *cp;
1993-03-21 12:45:37 +03:00
if ((cp = expand(*arglist)) == NULL)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 1;
1993-03-21 12:45:37 +03:00
if ((fi = Fopen(cp, "r")) == NULL) {
2002-03-06 00:29:30 +03:00
warn("%s", cp);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 1;
1993-03-21 12:45:37 +03:00
}
if (ssp >= NOFILE - 1) {
2005-07-20 03:07:10 +04:00
(void)printf("Too much \"sourcing\" going on.\n");
(void)Fclose(fi);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 1;
1993-03-21 12:45:37 +03:00
}
sstack[ssp].s_file = input;
sstack[ssp].s_cond = cond;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef NEW_CONDITIONAL
sstack[ssp].s_cond_stack = cond_stack;
#endif
1993-03-21 12:45:37 +03:00
sstack[ssp].s_loading = loading;
ssp++;
loading = 0;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
cond = CNONE;
1993-03-21 12:45:37 +03:00
input = fi;
sourcing++;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
}
/*
* Pop the current input back to the previous level.
* Update the "sourcing" flag as appropriate.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
unstack(void)
1993-03-21 12:45:37 +03:00
{
if (ssp <= 0) {
2005-07-20 03:07:10 +04:00
(void)printf("\"Source\" stack over-pop.\n");
1993-03-21 12:45:37 +03:00
sourcing = 0;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 1;
1993-03-21 12:45:37 +03:00
}
2005-07-20 03:07:10 +04:00
(void)Fclose(input);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (cond != CNONE || cond_stack != NULL)
2005-07-20 03:07:10 +04:00
(void)printf("Unmatched \"if\"\n");
1993-03-21 12:45:37 +03:00
ssp--;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
input = sstack[ssp].s_file;
1993-03-21 12:45:37 +03:00
cond = sstack[ssp].s_cond;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef NEW_CONDITIONAL
cond_stack = sstack[ssp].s_cond_stack;
#endif
1993-03-21 12:45:37 +03:00
loading = sstack[ssp].s_loading;
if (ssp == 0)
sourcing = loading;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
}
/*
* Touch the indicated file.
* This is nifty for the shell.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
2002-03-02 17:59:35 +03:00
alter(char *name)
1993-03-21 12:45:37 +03:00
{
struct stat sb;
struct timeval tv[2];
if (stat(name, &sb))
return;
2002-03-06 00:18:14 +03:00
(void)gettimeofday(&tv[0], NULL);
tv[0].tv_sec++;
TIMESPEC_TO_TIMEVAL(&tv[1], &sb.st_mtimespec);
2002-03-06 00:18:14 +03:00
(void)utimes(name, tv);
1993-03-21 12:45:37 +03:00
}
/*
* Examine the passed line buffer and
* return true if it is all blanks and tabs.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
blankline(char linebuf[])
1993-03-21 12:45:37 +03:00
{
char *cp;
1993-03-21 12:45:37 +03:00
for (cp = linebuf; *cp; cp++)
if (!is_WSP(*cp))
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
return 1;
1993-03-21 12:45:37 +03:00
}
/*
* Start of a "comment".
* Ignore it.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static char *
2002-03-02 17:59:35 +03:00
skip_comment(char *cp)
1993-03-21 12:45:37 +03:00
{
int nesting = 1;
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
for (/*EMPTY*/; nesting > 0 && *cp; cp++) {
1993-03-21 12:45:37 +03:00
switch (*cp) {
case '\\':
if (cp[1])
cp++;
break;
case '(':
nesting++;
break;
case ')':
nesting--;
break;
}
}
return cp;
}
/*
* Skin an arpa net address according to the RFC 822 interpretation
* of "host-phrase."
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC char *
2002-03-02 17:59:35 +03:00
skin(char *name)
1993-03-21 12:45:37 +03:00
{
int c;
char *cp, *cp2;
1993-03-21 12:45:37 +03:00
char *bufend;
int gotlt, lastsp;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char nbuf[LINESIZE];
1993-03-21 12:45:37 +03:00
if (name == NULL)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return NULL;
if (strchr(name, '(') == NULL && strchr(name, '<') == NULL
&& strchr(name, ' ') == NULL)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return name;
1993-03-21 12:45:37 +03:00
gotlt = 0;
lastsp = 0;
bufend = nbuf;
for (cp = name, cp2 = bufend; (c = *cp++) != '\0'; /*EMPTY*/) {
1993-03-21 12:45:37 +03:00
switch (c) {
case '(':
cp = skip_comment(cp);
lastsp = 0;
break;
case '"':
/*
* Start of a "quoted-string".
* Copy it in its entirety.
*/
while ((c = *cp) != '\0') {
1993-03-21 12:45:37 +03:00
cp++;
if (c == '"')
break;
if (c != '\\')
*cp2++ = c;
else if ((c = *cp) != '\0') {
1993-03-21 12:45:37 +03:00
*cp2++ = c;
cp++;
}
}
lastsp = 0;
break;
case ' ':
if (cp[0] == 'a' && cp[1] == 't' && cp[2] == ' ')
cp += 3, *cp2++ = '@';
else
if (cp[0] == '@' && cp[1] == ' ')
cp += 2, *cp2++ = '@';
else
lastsp = 1;
break;
case '<':
cp2 = bufend;
gotlt++;
lastsp = 0;
break;
case '>':
if (gotlt) {
gotlt = 0;
while ((c = *cp) && c != ',') {
cp++;
if (c == '(')
cp = skip_comment(cp);
else if (c == '"')
while ((c = *cp) != '\0') {
1993-03-21 12:45:37 +03:00
cp++;
if (c == '"')
break;
if (c == '\\' && *cp)
cp++;
}
}
lastsp = 0;
break;
}
2005-07-20 03:07:10 +04:00
/* FALLTHROUGH */
1993-03-21 12:45:37 +03:00
default:
if (lastsp) {
lastsp = 0;
*cp2++ = ' ';
}
*cp2++ = c;
if (c == ',' && !gotlt) {
*cp2++ = ' ';
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
for (/*EMPTY*/; *cp == ' '; cp++)
continue;
1993-03-21 12:45:37 +03:00
lastsp = 0;
bufend = cp2;
}
}
}
*cp2 = 0;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(nbuf);
1993-03-21 12:45:37 +03:00
}
/*
* Fetch the sender's name from the passed message.
* Reptype can be
* 0 -- get sender's name for display purposes
* 1 -- get sender's name for reply
* 2 -- get sender's name for Reply
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static char *
2002-03-02 17:59:35 +03:00
name1(struct message *mp, int reptype)
1993-03-21 12:45:37 +03:00
{
char namebuf[LINESIZE];
char linebuf[LINESIZE];
char *cp, *cp2;
FILE *ibuf;
2002-03-02 18:27:51 +03:00
int firstrun = 1;
1993-03-21 12:45:37 +03:00
if ((cp = hfield("from", mp)) != NULL)
1993-03-21 12:45:37 +03:00
return cp;
if (reptype == 0 && (cp = hfield("sender", mp)) != NULL)
1993-03-21 12:45:37 +03:00
return cp;
ibuf = setinput(mp);
namebuf[0] = '\0';
if (mail_readline(ibuf, linebuf, LINESIZE) < 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(namebuf);
newname:
1993-03-21 12:45:37 +03:00
for (cp = linebuf; *cp && *cp != ' '; cp++)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
cp = skip_WSP(cp);
1993-03-21 12:45:37 +03:00
for (cp2 = &namebuf[strlen(namebuf)];
*cp && !is_WSP(*cp) && cp2 < namebuf + LINESIZE - 1;
/*EMPTY*/)
1993-03-21 12:45:37 +03:00
*cp2++ = *cp++;
*cp2 = '\0';
if (mail_readline(ibuf, linebuf, LINESIZE) < 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(namebuf);
if ((cp = strchr(linebuf, 'F')) == NULL)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(namebuf);
1993-03-21 12:45:37 +03:00
if (strncmp(cp, "From", 4) != 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(namebuf);
while ((cp = strchr(cp, 'r')) != NULL) {
1993-03-21 12:45:37 +03:00
if (strncmp(cp, "remote", 6) == 0) {
if ((cp = strchr(cp, 'f')) == NULL)
1993-03-21 12:45:37 +03:00
break;
if (strncmp(cp, "from", 4) != 0)
break;
if ((cp = strchr(cp, ' ')) == NULL)
1993-03-21 12:45:37 +03:00
break;
cp++;
2002-03-02 18:27:51 +03:00
if (firstrun) {
cp2 = namebuf;
2002-03-02 18:27:51 +03:00
firstrun = 0;
1993-03-21 12:45:37 +03:00
} else
cp2 = strrchr(namebuf, '!') + 1;
while (*cp && cp2 < namebuf + LINESIZE - 1)
*cp2++ = *cp++;
if (cp2 < namebuf + LINESIZE - 1)
*cp2++ = '!';
*cp2 = '\0';
if (cp2 < namebuf + LINESIZE - 1)
goto newname;
else
break;
1993-03-21 12:45:37 +03:00
}
cp++;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(namebuf);
1993-03-21 12:45:37 +03:00
}
/*
* Count the occurrences of c in str
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static int
2002-03-02 17:59:35 +03:00
charcount(char *str, int c)
1993-03-21 12:45:37 +03:00
{
char *cp;
int i;
1993-03-21 12:45:37 +03:00
for (i = 0, cp = str; *cp; cp++)
if (*cp == c)
i++;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return i;
1993-03-21 12:45:37 +03:00
}
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Get sender's name from this message. If the message has
* a bunch of arpanet stuff in it, we may have to skin the name
* before returning it.
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC char *
nameof(struct message *mp, int reptype)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *cp, *cp2;
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
cp = skin(name1(mp, reptype));
if (reptype != 0 || charcount(cp, '!') < 2)
return cp;
cp2 = strrchr(cp, '!');
cp2--;
while (cp2 > cp && *cp2 != '!')
cp2--;
if (*cp2 == '!')
return cp2 + 1;
return cp;
1993-03-21 12:45:37 +03:00
}
/*
* Copy s1 to s2, return pointer to null in s2.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC char *
2002-03-02 17:59:35 +03:00
copy(char *s1, char *s2)
1993-03-21 12:45:37 +03:00
{
while ((*s2++ = *s1++) != '\0')
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
continue;
1993-03-21 12:45:37 +03:00
return s2 - 1;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* The core routine to check the ignore table for a field.
* Note: realfield should be lower-cased!
*/
PUBLIC int
member(char *realfield, struct ignoretab *table)
{
struct ignore *igp;
for (igp = table->i_head[hash(realfield)]; igp != 0; igp = igp->i_link)
if (*igp->i_field == *realfield &&
equal(igp->i_field, realfield))
return 1;
return 0;
}
1993-03-21 12:45:37 +03:00
/*
* See if the given header field is supposed to be ignored.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2005-07-19 05:38:38 +04:00
isign(const char *field, struct ignoretab ignoretabs[2])
1993-03-21 12:45:37 +03:00
{
char realfld[LINESIZE];
1993-03-21 12:45:37 +03:00
2002-03-02 18:27:51 +03:00
if (ignoretabs == ignoreall)
1993-03-21 12:45:37 +03:00
return 1;
/*
* Lower-case the string, so that "Status" and "status"
* will hash to the same place.
*/
istrcpy(realfld, field);
2002-03-02 18:27:51 +03:00
if (ignoretabs[1].i_count > 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return !member(realfld, ignoretabs + 1);
1993-03-21 12:45:37 +03:00
else
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return member(realfld, ignoretabs);
1993-03-21 12:45:37 +03:00
}
PUBLIC void
add_ignore(const char *name, struct ignoretab *tab)
{
char field[LINESIZE];
int h;
struct ignore *igp;
istrcpy(field, name);
if (member(field, tab))
return;
h = hash(field);
igp = ecalloc(1, sizeof(struct ignore));
igp->i_field = ecalloc(strlen(field) + 1, sizeof(char));
(void)strcpy(igp->i_field, field);
igp->i_link = tab->i_head[h];
tab->i_head[h] = igp;
tab->i_count++;
}
/*
* Write a file to stdout, skipping comment lines.
*/
PUBLIC void
cathelp(const char *fname)
{
char *line;
FILE *f;
size_t len;
if ((f = Fopen(fname, "r")) == NULL) {
warn(fname);
return;
}
while ((line = fgetln(f, &len)) != NULL) {
if (*line == '#')
continue;
if (fwrite(line, 1, len, stdout) != len)
break;
}
(void)Fclose(f);
return;
}