NetBSD/sys/dev/mii/tqphyreg.h

94 lines
4.5 KiB
C
Raw Normal View History

1999-09-16 09:58:18 +04:00
/* $NetBSD: tqphyreg.h,v 1.2 1999/09/16 05:58:18 soren Exp $ */
/*
* Copyright (c) 1999 Soren S. Jorvang.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _DEV_MII_TQPHYREG_H_
#define _DEV_MII_TQPHYREG_H_
/*
* TDK TSC78Q2120 PHY registers
*
* Documentation available at http://www.tsc.tdk.com/lan/78Q2120.pdf .
*/
/*
* http://cesdis.gsfc.nasa.gov/linux/misc/100mbps.html has this to say:
*
* TDK Semiconductor (formerly Silicon Systems) 78Q2120 (10/100) and 78Q2121
* (100Mbps only) MII transceivers. The first PHY available which worked at
* both 5.0 and 3.3V. Used on the 3Com 3c574 and Ositech products. The OUI
* is 00:c0:39, models 20 and 21. Warning: The older revision 3 part has
* several bugs. It always responds to MDIO address 0, and has clear-only
* semantics for the capability-advertise registers. The current (3/99)
* revision 11 part, shipping since 8/98, has reportedly fixed these problems.
*/
#define MII_TQPHY_VENDOR 0x10 /* Vendor specific register */
#define VENDOR_RPTR 0x8000 /* Repeater mode */
#define VENDOR_INTLEVEL 0x4000 /* INTR pin level */
#define VENDOR_RSVD1 0x2000 /* Reserved */
#define VENDOR_TXHIM 0x1000 /* Transmit high impedance */
#define VENDOR_SEQTESTINHIBIT 0x0800 /* Disables 10baseT SQE testing */
#define VENDOR_10BT_LOOPBACK 0x0400 /* 10baseT natural loopback */
#define VENDOR_GPIO1_DAT 0x0200 /* General purpose I/O 1 data */
#define VENDOR_GPIO1_DIR 0x0100 /* General purpose I/O 1 direction */
#define VENDOR_GPIO0_DAT 0x0080 /* General purpose I/O 0 data */
#define VENDOR_GPIO0_DIR 0x0040 /* General purpose I/O 0 direction */
#define VENDOR_APOL 0x0020 /* Auto polarity */
#define VENDOR_RVSPOL 0x0010 /* Reverse polarity */
#define VENDOR_RSVD2 0x0008 /* Reserved (must be zero) */
#define VENDOR_RSVD3 0x0004 /* Reserved (must be zero) */
#define VENDOR_PCSBP 0x0002 /* PCS bypass */
#define VENDOR_RXCC 0x0001 /* Receive clock control */
#define MII_TQPHY_INTR 0x11 /* Interrupt control/status register */
#define INTR_JABBER_IE 0x8000 /* Jabber interrupt enable */
#define INTR_RXER_IE 0x4000 /* Receive error enable */
#define INTR_PRX_IE 0x2000 /* Page received enable */
#define INTR_PFD_IE 0x1000 /* Parallel detect fault enable */
#define INTR_LPACK_IE 0x0800 /* Link partner ack. enable */
#define INTR_LSCHG_IE 0x0400 /* Link status change enable */
#define INTR_RFAULT_IE 0x0200 /* Remote fault enable */
#define INTR_ANEGCOMP_IE 0x0100 /* Autonegotiation complete enable */
#define INTR_JABBER_INT 0x0080 /* Jabber interrupt */
#define INTR_RXER_INT 0x0040 /* Receive error interrupt */
#define INTR_PRX_INT 0x0020 /* Page receive interrupt */
#define INTR_PDF_INT 0x0010 /* Parallel detect fault interrupt */
#define INTR_LPACK_INT 0x0008 /* Link partner ack. interrupt */
#define INTR_LSCHG_INT 0x0004 /* Link status change interrupt */
#define INTR_RFAULT_INT 0x0002 /* Remote fault interrupt */
#define INTR_ANEGCOMP_INT 0x0001 /* Autonegotiation complete interrupt */
#define MII_TQPHY_DIAG 0x12 /* Diagnostic register */
#define DIAG_ANEGF 0x1000 /* Autonegotiation fail */
#define DIAG_DPLX 0x0800 /* Duplex (half/full) */
#define DIAG_RATE 0x0400 /* Rate (10/100) */
#define DIAG_RXPASS 0x0200 /* Receive pass */
#define DIAG_RXLOCK 0x0100 /* Receive lock */
#endif /* _DEV_MII_TQPHYREG_H_ */