NetBSD/sys/arch/sun3/conf/GENERIC

# $NetBSD: GENERIC,v 1.63 2000/01/23 23:46:19 hubertf Exp $

# GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
# Supports root on: ie0, le0, sd*, ...

include "arch/sun3/conf/std.sun3"

#ident 		"GENERIC-$Revision: 1.63 $"

# Machines to be supported by this kernel
options 	FPU_EMULATE
options 	HAVECACHE		# Sun3/260 VAC

# Needs to be set per system.  i.e change these as you see fit
maxusers	4

# Standard system options
options 	KTRACE		# system call tracing
options 	SYSVMSG		# System V message queues
options 	SYSVSEM		# System V semaphores
options 	SYSVSHM		# System V shared memory
#options 	SHMMAXPGS=1024	# 1024 pages is the default
options 	LKM		# loadable kernel modules
#options 	INSECURE	# disable kernel security level
#options 	UCONSOLE	# Allow non-root TIOCCONS

# Which kernel debugger?  Uncomment either this:
options 	DDB
# ... or these for KGDB (gdb remote target)
#makeoptions DEBUG="-g"		# debugging symbols for gdb
#options 	KGDB
#options 	KGDBDEV=0x0C01	# ttya=0C00 ttyb=0C01

# Other debugging options
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	DEBUG		# kernel debugging code
#options 	DIAGNOSTIC	# extra kernel sanity checking
#options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
#options 	PMAP_DEBUG
#options 	SCSIDEBUG
#options 	SCSIVERBOSE		# Verbose SCSI errors

# Compatability options
options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
#options 	COMPAT_SVR4	# can run SVR4 executables
options 	COMPAT_43	# and 4.3BSD and ...
options 	COMPAT_10	# NetBSD 1.0
options 	COMPAT_11	# NetBSD 1.1
options 	COMPAT_12	# NetBSD 1.2
options 	COMPAT_13	# NetBSD 1.3
options 	COMPAT_14	# NetBSD 1.4
#options 	COMPAT_LINUX	# can run Linux/m68k executables
#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)

# Filesystem options
file-system	FFS		# Berkeley Fast Filesystem
file-system	NFS		# Sun NFS client support
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	FDESC		# /dev/fd/*
file-system	KERNFS		# /kern
file-system	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system	PROCFS		# /proc
file-system	UNION		# union file system
file-system	MFS		# memory-based filesystem

options 	NFSSERVER	# nfs server support
options 	QUOTA		# FFS quotas
#options 	FFS_EI		# FFS Endian Independant support
#options 	SOFTDEP         # FFS soft updates support.

# Pull in config fragments for kernel crypto.  This is required for
# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
# one of these, based on whether you use crypto-us or crypto-intl, and
# adjust the prefixes as necessary.

#prefix ../crypto-us/sys
#cinclude "conf/files.crypto-us"
#prefix

#prefix ../crypto-intl/sys
#cinclude "conf/files.crypto-intl"
#prefix

# Networking options
options 	INET		# IP prototol stack support
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
options 	TCP_COMPAT_42	# compatibility with 4.2BSD TCP/IP
#options 	GATEWAY		# IP packet forwarding
#options 	ISO,TPIP	# OSI networking
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
options 	PFIL_HOOKS	# pfil(9) packet filter hooks.

# Work-around for root on slow servers (insurance...)
options 	NFS_BOOT_RWSIZE=1024
options 	NFS_BOOT_BOOTPARAM

config		netbsd root on ? type ?

# On-board I/O space (required)
include "arch/sun3/conf/obio.sun3"

# On-board memory (optional)
# See frame-buffers
obmem0 at mainbus?

# VME bus support (optional)
# One unit for each address space
vme0 at mainbus? # A16/D16
vme1 at mainbus? # A16/D32
vme2 at mainbus? # A24/D16
vme3 at mainbus? # A24/D32
vme4 at mainbus? # A32/D16
vme5 at mainbus? # A32/D32

#
# Serial ports
#
zstty0	at zsc1 channel 0	# ttya
zstty1	at zsc1 channel 1	# ttyb

kbd0	at zsc0 channel 0	# keyboard
ms0	at zsc0 channel 1	# mouse

#
# Network devices
#

# Intel Ethernet (onboard, or VME)
ie0 at obio0 addr 0x0C0000 ipl 3
ie1 at vme2  addr 0xe88000 ipl 3 vect 0x75

# Lance Ethernet (only onboard)
le0 at obio0 addr 0x120000 ipl 3

# All Sun3 machines with an "le" (3/50, 3/60) should be
# presumed to have the old, buggy LANCE chip. (Rev. C)
options 	LANCE_REVC_BUG

#
# Disk and tape devices
#

# Sun3 "si" SCSI controller (NCR 5380)
# This driver has several flags which may be enabled using
# the "flags" directive.  Valid flags are:
#
# 0x000ff	Set (1<<target) to disable disconnect/reselect
# 0x0ff00	Set (1<<(target+8)) to disable parity checking
# 0x10000	Set this bit to disable DMA interrupts (poll)
# 0x20000	Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
si0 at obio0 addr 0x140000 ipl 2
si0 at vme2  addr 0x200000 ipl 2 vect 0x40
si1 at vme2  addr 0x204000 ipl 2 vect 0x41

# Xylogics 450/451 controllers (VME A16/D16)
xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
xy* at xyc? drive ?

# Xylogics 7053 controllers (VME A16/D32)
xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
xd* at xdc? drive ?

# Xylogics 472 tape controllers?

# Sun3/E SCSI+Ethernet board (VME A24/D16)
# Note: the board uses vect and vect+1
sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
si* at sebuf?
ie* at sebuf?

#
# Frame buffer devices
#

include "arch/sun3/conf/bw2.sun3"
include "arch/sun3/conf/cg4.sun3"

# 3/60 P4 accelerated 8-bit color frame buffer
# cgsix0 at obmem0 addr 0xff000000

# 3/60 P4 24-bit color frame buffer
# cgeight0 at obmem0 addr 0xff300000

# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8

# Support for the CG9 24-bit frame buffer (VME A32/D32).
# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA

#
# SCSI infrastructure
#
scsibus* at scsi?

sd* at scsibus? target ? lun ?		# SCSI disks
st* at scsibus? target ? lun ?		# SCSI tapes
cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
ch* at scsibus? target ? lun ?		# SCSI changer devices
ss* at scsibus? target ? lun ?		# SCSI scanners
uk* at scsibus? target ? lun ?		# unknown SCSI devices

# Memory-disk drivers
pseudo-device	md		2

# Misc.
pseudo-device	loop		1	# network loopback
pseudo-device	bpfilter	8	# packet filter
pseudo-device	sl		2	# CSLIP
pseudo-device	ppp		2	# PPP
pseudo-device	tun		2	# network tunneling over tty
#pseudo-device	gre		2	# generic L3 over IP tunnel
#pseudo-device	ipfilter		# ip filter
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
# rnd is EXPERIMENTAL
#pseudo-device	rnd			# /dev/random and in-kernel generator

pseudo-device	pty		32	# pseudo-terminals
#pseudo-device	vnd		4	# paging to files
#pseudo-device	ccd		4	# concatenated disks
#pseudo-device	raid		4	# RAIDframe disk driver
Add commented out "ident"-command 2000-01-24 02:46:04 +03:00			`# $NetBSD: GENERIC,v 1.63 2000/01/23 23:46:19 hubertf Exp $`
Lots of changes. Fairly stable now. 1994-11-22 00:26:40 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)`
Retool for native build. 1995-06-10 01:53:27 +04:00			`# Supports root on: ie0, le0, sd*, ...`
it links with out any unresolved symbols, last few are just stubs because we aren't likely to get near execing init for a while 1993-08-04 02:37:04 +04:00
Changed "std.sun3" to "arch/sun3/conf/std.sun3" because of config changes 1996-10-08 22:01:47 +04:00			`include "arch/sun3/conf/std.sun3"`
it links with out any unresolved symbols, last few are just stubs because we aren't likely to get near execing init for a while 1993-08-04 02:37:04 +04:00
Add commented out "ident"-command 2000-01-24 02:46:04 +03:00			`#ident "GENERIC-$Revision: 1.63 $"`

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x Configure P4 frame buffers at the address of their P4 reg. Move messy Sun3 bw2 and cg4 configs to included files. 1998-02-08 08:10:45 +03:00			`# Machines to be supported by this kernel`
Add option FPU_EMULATE 1995-03-01 08:07:39 +03:00			`options FPU_EMULATE`
Retool for native build. 1995-06-10 01:53:27 +04:00			`options HAVECACHE # Sun3/260 VAC`
boots, presents shell prompt, and doesn't crash immediately 1994-02-23 11:28:11 +03:00
Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00			`# Needs to be set per system. i.e change these as you see fit`
boots, presents shell prompt, and doesn't crash immediately 1994-02-23 11:28:11 +03:00			`maxusers 4`
Set TIMEZONE=0, DST=0 (which is correct for the hardware clock). 1995-08-09 00:51:26 +04:00
Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00			`# Standard system options`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`options KTRACE # system call tracing`
			`options SYSVMSG # System V message queues`
			`options SYSVSEM # System V semaphores`
			`options SYSVSHM # System V shared memory`
			`#options SHMMAXPGS=1024 # 1024 pages is the default`
turn on LKM by default, per PR#4423 1998-06-11 23:02:35 +04:00			`options LKM # loadable kernel modules`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`#options INSECURE # disable kernel security level`
			`#options UCONSOLE # Allow non-root TIOCCONS`

			`# Which kernel debugger? Uncomment either this:`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`options DDB`
update comments 1997-02-11 02:35:27 +03:00			`# ... or these for KGDB (gdb remote target)`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`#makeoptions DEBUG="-g" # debugging symbols for gdb`
Merge netbsd-1-2 branch back into mainline. 1996-10-09 04:14:32 +04:00			`#options KGDB`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`#options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01`

			`# Other debugging options`
* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file * fix up use of 'options<SPACE><TAB>' 1997-11-17 04:58:31 +03:00			`#options DDB_HISTORY_SIZE=100 # enable history editing in DDB`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`#options DEBUG # kernel debugging code`
			`#options DIAGNOSTIC # extra kernel sanity checking`
			`#options KMEMSTATS # kernel memory statistics (vmstat -m)`
			`#options PMAP_DEBUG`
			`#options SCSIDEBUG`
add a before tab to SCSIVERBOSE 1997-08-23 23:16:06 +04:00			`#options SCSIVERBOSE # Verbose SCSI errors`
it links with out any unresolved symbols, last few are just stubs because we aren't likely to get near execing init for a while 1993-08-04 02:37:04 +04:00
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`# Compatability options`
			`options COMPAT_SUNOS # can run SunOS 4.1.1 executables`
Add COMPAT_SVR4 for m68k. 1999-04-20 01:22:56 +04:00			`#options COMPAT_SVR4 # can run SVR4 executables`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`options COMPAT_43 # and 4.3BSD and ...`
			`options COMPAT_10 # NetBSD 1.0`
			`options COMPAT_11 # NetBSD 1.1`
			`options COMPAT_12 # NetBSD 1.2`
Add COMPAT_13. 1997-12-01 19:02:09 +03:00			`options COMPAT_13 # NetBSD 1.3`
It's time to be COMPAT_14. 1999-07-29 14:37:12 +04:00			`options COMPAT_14 # NetBSD 1.4`
Added options COMPAT_LINUX and EXEC_ELF32 as comments to GENERIC configuration files. 1998-12-15 22:50:00 +03:00			`#options COMPAT_LINUX # can run Linux/m68k executables`
Add COMPAT_SVR4 for m68k. 1999-04-20 01:22:56 +04:00			`#options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00
Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00			`# Filesystem options`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`file-system FFS # Berkeley Fast Filesystem`
			`file-system NFS # Sun NFS client support`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`file-system CD9660 # ISO 9660 + Rock Ridge file system`
			`file-system FDESC # /dev/fd/*`
			`file-system KERNFS # /kern`
			`file-system NULLFS # loopback file system`
Add overlay to kernel configs. 2000-01-20 22:12:28 +03:00			`file-system OVERLAY # overlay file system`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`file-system PROCFS # /proc`
			`file-system UNION # union file system`
			`file-system MFS # memory-based filesystem`
Adopt for new file system and root spec grammar. 1997-01-31 05:08:19 +03:00
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`options NFSSERVER # nfs server support`
			`options QUOTA # FFS quotas`
Add commented out "options FFS_EI" 1998-03-18 19:34:41 +03:00			`#options FFS_EI # FFS Endian Independant support`
Add commented out option SOFTDEP to all GENERIC kernels. 1999-11-15 22:10:44 +03:00			`#options SOFTDEP # FFS soft updates support.`
Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`# Pull in config fragments for kernel crypto. This is required for`
			`# options IPSEC etc. to work. If you want to run with IPSEC, uncomment`
			`# one of these, based on whether you use crypto-us or crypto-intl, and`
			`# adjust the prefixes as necessary.`

			`#prefix ../crypto-us/sys`
			`#cinclude "conf/files.crypto-us"`
			`#prefix`

			`#prefix ../crypto-intl/sys`
			`#cinclude "conf/files.crypto-intl"`
			`#prefix`

Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00			`# Networking options`
Merge netbsd-1-2 branch back into mainline. 1996-10-09 04:14:32 +04:00			`options INET # IP prototol stack support`
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`options INET6 # IPV6`
			`#options IPSEC # IP security`
			`#options IPSEC_ESP # IP security (encryption part; define w/IPSEC)`
			`#options IPSEC_DEBUG # debug for IP security`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`#options GATEWAY # IP packet forwarding`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`#options ISO,TPIP # OSI networking`
			`#options EON # OSI tunneling over IP`
			`#options CCITT,LLC,HDLC # X.25`
enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG on the GENERIC kernels that had them commented out. XXX: Please note, that not all the kernels have all the options defined! 1999-07-20 11:40:34 +04:00			`options PFIL_HOOKS # pfil(9) packet filter hooks.`
boots, presents shell prompt, and doesn't crash immediately 1994-02-23 11:28:11 +03:00
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`# Work-around for root on slow servers (insurance...)`
			`options NFS_BOOT_RWSIZE=1024`
Add NFS_BOOT_BOOTPARAM (fixes PR#4904) 1998-01-28 19:40:19 +03:00			`options NFS_BOOT_BOOTPARAM`
boots, presents shell prompt, and doesn't crash immediately 1994-02-23 11:28:11 +03:00
Adopt for new file system and root spec grammar. 1997-01-31 05:08:19 +03:00			`config netbsd root on ? type ?`
it links with out any unresolved symbols, last few are just stubs because we aren't likely to get near execing init for a while 1993-08-04 02:37:04 +04:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# On-board I/O space (required)`
			`include "arch/sun3/conf/obio.sun3"`

			`# On-board memory (optional)`
			`# See frame-buffers`
			`obmem0 at mainbus?`

			`# VME bus support (optional)`
			`# One unit for each address space`
			`vme0 at mainbus? # A16/D16`
			`vme1 at mainbus? # A16/D32`
			`vme2 at mainbus? # A24/D16`
			`vme3 at mainbus? # A24/D32`
			`vme4 at mainbus? # A32/D16`
			`vme5 at mainbus? # A32/D32`

New autoconfig design that controls attach order. 1996-03-26 18:15:46 +03:00			`#`
			`# Serial ports`
			`#`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`zstty0 at zsc1 channel 0 # ttya`
			`zstty1 at zsc1 channel 1 # ttyb`
New autoconfig design that controls attach order. 1996-03-26 18:15:46 +03:00
clean up whitespace use 1997-05-07 06:14:59 +04:00			`kbd0 at zsc0 channel 0 # keyboard`
			`ms0 at zsc0 channel 1 # mouse`
New autoconfig design that controls attach order. 1996-03-26 18:15:46 +03:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`#`
			`# Network devices`
			`#`
Add bwtwo, cgfour, fb 1995-03-10 05:31:29 +03:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`# Intel Ethernet (onboard, or VME)`
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`ie0 at obio0 addr 0x0C0000 ipl 3`
			`ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75`
Add zs driver, organize like TIMESINK 1994-05-04 09:56:33 +04:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`# Lance Ethernet (only onboard)`
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`le0 at obio0 addr 0x120000 ipl 3`

			`# All Sun3 machines with an "le" (3/50, 3/60) should be`
			`# presumed to have the old, buggy LANCE chip. (Rev. C)`
			`options LANCE_REVC_BUG`
Enable the ie and si drivers on VME. 1995-01-24 08:48:27 +03:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`#`
			`# Disk and tape devices`
			`#`

			`# Sun3 "si" SCSI controller (NCR 5380)`
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00			`# This driver has several flags which may be enabled using`
			`# the "flags" directive. Valid flags are:`
Use explicit addresses for obio devices. 1996-10-30 03:17:10 +03:00			`#`
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00			`# 0x000ff Set (1<<target) to disable disconnect/reselect`
			`# 0x0ff00 Set (1<<(target+8)) to disable parity checking`
			`# 0x10000 Set this bit to disable DMA interrupts (poll)`
			`# 0x20000 Set this bit to disable DMA entirely (use PIO)`
Use explicit addresses for obio devices. 1996-10-30 03:17:10 +03:00			`#`
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00			`# For example: "flags 0x1000f" would disable DMA interrupts,`
			`# and disable disconnect/reselect for targets 0-3`
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`si0 at obio0 addr 0x140000 ipl 2`
			`si0 at vme2 addr 0x200000 ipl 2 vect 0x40`
			`si1 at vme2 addr 0x204000 ipl 2 vect 0x41`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# Xylogics 450/451 controllers (VME A16/D16)`
			`xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48`
			`xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`xy* at xyc? drive ?`
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# Xylogics 7053 controllers (VME A16/D32)`
			`xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44`
			`xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45`
Add Sun3/E stuff, and re-organize. 1997-10-17 06:59:05 +04:00			`xd* at xdc? drive ?`
New autoconfig interface to support VME, etc. 1994-12-12 21:58:45 +03:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`# Xylogics 472 tape controllers?`

Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# Sun3/E SCSI+Ethernet board (VME A24/D16)`
			`# Note: the board uses vect and vect+1`
			`sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75`
			`sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77`
Move Sun3/E stuff 1997-12-13 03:23:45 +03:00			`si* at sebuf?`
			`ie* at sebuf?`

Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`#`
			`# Frame buffer devices`
			`#`

Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x Configure P4 frame buffers at the address of their P4 reg. Move messy Sun3 bw2 and cg4 configs to included files. 1998-02-08 08:10:45 +03:00			`include "arch/sun3/conf/bw2.sun3"`
			`include "arch/sun3/conf/cg4.sun3"`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
			`# 3/60 P4 accelerated 8-bit color frame buffer`
Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x Configure P4 frame buffers at the address of their P4 reg. Move messy Sun3 bw2 and cg4 configs to included files. 1998-02-08 08:10:45 +03:00			`# cgsix0 at obmem0 addr 0xff000000`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
			`# 3/60 P4 24-bit color frame buffer`
Move the sun3-vs-sun3x stuff into std.sun3 and std.sun3x Configure P4 frame buffers at the address of their P4 reg. Move messy Sun3 bw2 and cg4 configs to included files. 1998-02-08 08:10:45 +03:00			`# cgeight0 at obmem0 addr 0xff300000`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).`
			`cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`# Support for the CG9 24-bit frame buffer (VME A32/D32).`
			`# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA`
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00
			`#`
			`# SCSI infrastructure`
			`#`
GENERIC kernel works. 1994-09-20 20:17:08 +04:00			`scsibus* at scsi?`
Make scsi device mappings Sun compatible. 1995-02-24 07:58:21 +03:00
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00			`sd* at scsibus? target ? lun ? # SCSI disks`
			`st* at scsibus? target ? lun ? # SCSI tapes`
			`cd* at scsibus? target ? lun ? # SCSI CD-ROMs`
			`ch* at scsibus? target ? lun ? # SCSI changer devices`
			`ss* at scsibus? target ? lun ? # SCSI scanners`
			`uk* at scsibus? target ? lun ? # unknown SCSI devices`
it links with out any unresolved symbols, last few are just stubs because we aren't likely to get near execing init for a while 1993-08-04 02:37:04 +04:00
rename: ramdisk => md 1996-12-29 02:27:00 +03:00			`# Memory-disk drivers`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`pseudo-device md 2`
Add RAMDISK, move some things around. Add rd, xd, xy* (only rd is done). 1995-10-09 02:38:41 +03:00
Switch to ncr_si (will just do PIO for now) and cleanup 1995-11-18 02:31:11 +03:00			`# Misc.`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`pseudo-device loop 1 # network loopback`
			`pseudo-device bpfilter 8 # packet filter`
			`pseudo-device sl 2 # CSLIP`
			`pseudo-device ppp 2 # PPP`
			`pseudo-device tun 2 # network tunneling over tty`
Add (commented out) 'gre' pseudo device line. Feedback is welcome. Inspired by Klaus Klein. 1998-11-25 23:30:44 +03:00			`#pseudo-device gre 2 # generic L3 over IP tunnel`
Update the description of the flags for "si" devices. Remove wired-down scsi disk targets (no longer needed). Add ch, ss, uk (scsi devcies) at mycroft's requst. 1997-03-11 23:59:10 +03:00			`#pseudo-device ipfilter # ip filter`
bring in content of GENERIC.v6 into GENERIC. remove GENERIC.v6 file (as it is part of GENERIC now). "faith" interface is commented out by default as it is not really for general use. IPsec items are commented out as well, though we can enable "options IPSEC" without export-related issue ("options IPSEC" will enable authentication portion only). We may need to think about it again. if you have problem compiling with INET6 on archs I do not have access to, please contact me. XXX what to do with arch/arm32/SHARK{,.v6}? 1999-11-21 17:00:37 +03:00			`pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)`
			`#pseudo-device faith 1 # IPv[46] tcp relay translation i/f`
add pseudo-device rnd, commented out 1997-11-20 11:11:14 +03:00			`# rnd is EXPERIMENTAL`
			`#pseudo-device rnd # /dev/random and in-kernel generator`
Add more stuff! (/kern /proc bpf, ppp, sp, ...) 1995-03-11 02:52:10 +03:00
Merge arch/sun3x into arch/sun3 1998-02-05 07:56:24 +03:00			`pseudo-device pty 32 # pseudo-terminals`
clean up whitespace use 1997-05-07 06:14:59 +04:00			`#pseudo-device vnd 4 # paging to files`
			`#pseudo-device ccd 4 # concatenated disks`
Added a (commented out) configuration line for the RAIDframe device driver. 1998-11-16 19:44:55 +03:00			`#pseudo-device raid 4 # RAIDframe disk driver`