NetBSD/sys/dev/pci/igsfb_pci.c

196 lines
5.6 KiB
C
Raw Normal View History

2002-10-02 20:51:16 +04:00
/* $NetBSD: igsfb_pci.c,v 1.6 2002/10/02 16:51:38 thorpej Exp $ */
/*
* Copyright (c) 2002 Valeriy E. Ushakov
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Integraphics Systems IGA 168x and CyberPro series.
* Only tested on IGA 1682 in Krups JavaStation-NC.
*/
#include <sys/cdefs.h>
2002-10-02 20:51:16 +04:00
__KERNEL_RCSID(0, "$NetBSD: igsfb_pci.c,v 1.6 2002/10/02 16:51:38 thorpej Exp $");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/malloc.h>
#include <sys/buf.h>
#ifdef __sparc__ /* XXX: this doesn't belong here */
#include <machine/autoconf.h>
#endif
#include <machine/bus.h>
#include <machine/intr.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcidevs.h>
#include <dev/wscons/wsconsio.h>
#include <dev/ic/igsfbreg.h>
#include <dev/ic/igsfbvar.h>
static int igsfb_pci_match(struct device *, struct cfdata *, void *);
static void igsfb_pci_attach(struct device *, struct device *, void *);
2002-10-01 00:37:04 +04:00
CFATTACH_DECL(igsfb_pci, sizeof(struct igsfb_softc),
2002-10-02 20:51:16 +04:00
igsfb_pci_match, igsfb_pci_attach, NULL, NULL);
static int
igsfb_pci_match(parent, match, aux)
struct device *parent;
struct cfdata *match;
void *aux;
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) != PCI_VENDOR_INTEGRAPHICS)
return (0);
/* probably can drive iga1680 and cyberpro cards as well */
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEGRAPHICS_IGA1682)
return (1);
if (PCI_PRODUCT(pa->pa_id) == 0x2000) /* XXX */
return (1);
return (0);
}
/*
* Note, that the chip may still be not enabled (e.g. JavaStation PROM
* doesn't bother to init the chip if PROM output goes to serial).
*/
static void
igsfb_pci_attach(parent, self, aux)
struct device *parent, *self;
void *aux;
{
struct igsfb_softc *sc = (struct igsfb_softc *)self;
struct pci_attach_args *pa = aux;
bus_addr_t iobase;
int ioflags;
int isconsole;
char devinfo[256];
pci_devinfo(pa->pa_id, pa->pa_class, 0, devinfo);
printf(": %s (rev. 0x%02x)\n", devinfo, PCI_REVISION(pa->pa_class));
if (PCI_PRODUCT(pa->pa_id) == PCI_PRODUCT_INTEGRAPHICS_IGA1682)
sc->sc_is2k = 0;
else
sc->sc_is2k = 1;
/*
* Configure memory space first since for CyberPro we use
* memory-mapped i/o access. Note that we are NOT mapping any
* of it yet. (XXX: search for memory BAR?)
*/
#define IGS_MEM_MAPREG (PCI_MAPREG_START + 0)
sc->sc_memt = pa->pa_memt;
if (pci_mapreg_info(pa->pa_pc, pa->pa_tag,
IGS_MEM_MAPREG, PCI_MAPREG_TYPE_MEM,
&sc->sc_memaddr, &sc->sc_memsz, &sc->sc_memflags) != 0)
{
printf("unable to configure memory space\n");
return;
}
/*
* Configure I/O space. On CyberPro use MMIO. IGS 168x
* doesn't have a BAR for its i/o, so we have to hardcode it.
*/
if (sc->sc_is2k) {
sc->sc_iot = sc->sc_memt;
iobase = IGS_MEM_MMIO_SELECT | sc->sc_memaddr;
ioflags = sc->sc_memflags;
printf("mem = 0x%08x, io = 0x%08x\n",
(u_int32_t)sc->sc_memaddr,
(u_int32_t)iobase);
} else {
/* feh, 1682 config denies having io space registers */
sc->sc_iot = pa->pa_iot;
iobase = 0;
ioflags = 0;
}
/*
* Map I/O registers. This is done in bus glue, not in common
* code because on e.g. ISA bus we'd need to access registers
* to obtain/program linear memory location.
*/
if (bus_space_map(sc->sc_iot,
iobase + IGS_REG_BASE, IGS_REG_SIZE, ioflags,
&sc->sc_ioh) != 0)
{
printf("unable to map I/O registers\n");
return;
}
/*
* Enable the chip.
*
* XXX: for CyberPro sc->sc_iot is actually MMIO. Make sure
* that the card responds to memory cycles first?
*/
if (igsfb_enable(sc->sc_iot) != 0)
return;
#ifdef __arm__ /* XXX: uwe: netwinder */
/*
* On Netwinder the card is absolutely out of whack.
* Program the registers to bring the card into a usable state.
* On Krups we rely on OFW to program the card correctly
* (XXX: re-check the case when the console is on serial).
*/
igsfb_hw_setup(sc);
#endif
/*
* TODO: Map graphic coprocessor registers. not sure if this
* needs to be done in bus glue or can be moved to common
* attach code.
*/
isconsole = 0;
#ifdef __arm__
isconsole = 1; /* XXX */
#endif
#ifdef __sparc__ /* XXX: this doesn't belong here */
if (PCITAG_NODE(pa->pa_tag) == prom_instance_to_package(prom_stdout()))
isconsole = 1;
#endif
igsfb_common_attach(sc, isconsole);
}