2008-07-09 23:47:23 +04:00
|
|
|
/* $NetBSD: if_ath_cardbus.c,v 1.30 2008/07/09 19:47:24 joerg Exp $ */
|
2003-10-14 21:47:03 +04:00
|
|
|
/*
|
|
|
|
* Copyright (c) 2003
|
|
|
|
* Ichiro FUKUHARA <ichiro@ichiro.org>.
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
* This product includes software developed by Ichiro FUKUHARA.
|
|
|
|
* 4. The name of the company nor the name of the author may be used to
|
|
|
|
* endorse or promote products derived from this software without specific
|
|
|
|
* prior written permission.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY ICHIRO FUKUHARA ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
* IN NO EVENT SHALL ICHIRO FUKUHARA OR THE VOICES IN HIS HEAD BE LIABLE FOR
|
|
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*/
|
|
|
|
/*
|
|
|
|
* CardBus bus front-end for the AR5001 Wireless LAN 802.11a/b/g CardBus.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
2008-07-09 23:47:23 +04:00
|
|
|
__KERNEL_RCSID(0, "$NetBSD: if_ath_cardbus.c,v 1.30 2008/07/09 19:47:24 joerg Exp $");
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
#include "opt_inet.h"
|
|
|
|
#include "bpfilter.h"
|
|
|
|
|
|
|
|
#include <sys/param.h>
|
2005-02-27 03:26:58 +03:00
|
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/mbuf.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <sys/malloc.h>
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
#include <sys/errno.h>
|
|
|
|
#include <sys/device.h>
|
|
|
|
|
|
|
|
#include <machine/endian.h>
|
2005-02-27 03:26:58 +03:00
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/if_dl.h>
|
|
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/if_ether.h>
|
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
#include <net80211/ieee80211_netbsd.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
|
2005-02-27 03:26:58 +03:00
|
|
|
#if NBPFILTER > 0
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <net/bpf.h>
|
2005-02-27 03:26:58 +03:00
|
|
|
#endif
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
#ifdef INET
|
2005-02-27 03:26:58 +03:00
|
|
|
#include <netinet/in.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <netinet/if_inarp.h>
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
2007-10-19 15:59:34 +04:00
|
|
|
#include <sys/bus.h>
|
|
|
|
#include <sys/intr.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <dev/mii/mii_bitbang.h>
|
|
|
|
|
2005-06-22 10:14:51 +04:00
|
|
|
#include <dev/ic/ath_netbsd.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
#include <dev/ic/athvar.h>
|
2006-04-02 09:52:14 +04:00
|
|
|
#include <contrib/dev/ath/ah.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
#include <dev/pci/pcidevs.h>
|
|
|
|
|
|
|
|
#include <dev/cardbus/cardbusvar.h>
|
2004-08-02 23:14:28 +04:00
|
|
|
#include <dev/pci/pcidevs.h>
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* PCI configuration space registers
|
|
|
|
*/
|
|
|
|
#define ATH_PCI_MMBA 0x10 /* memory mapped base */
|
|
|
|
|
|
|
|
struct ath_cardbus_softc {
|
|
|
|
struct ath_softc sc_ath;
|
|
|
|
|
|
|
|
/* CardBus-specific goo. */
|
|
|
|
void *sc_ih; /* interrupt handle */
|
|
|
|
cardbus_devfunc_t sc_ct; /* our CardBus devfuncs */
|
|
|
|
cardbustag_t sc_tag; /* our CardBus tag */
|
|
|
|
bus_size_t sc_mapsize; /* the size of mapped bus space region */
|
|
|
|
|
|
|
|
pcireg_t sc_bar_val; /* value of the BAR */
|
|
|
|
|
2008-06-24 23:44:51 +04:00
|
|
|
cardbus_intr_line_t sc_intrline; /* interrupt line */
|
2006-06-05 09:14:37 +04:00
|
|
|
bus_space_tag_t sc_iot;
|
|
|
|
bus_space_handle_t sc_ioh;
|
2003-10-14 21:47:03 +04:00
|
|
|
};
|
|
|
|
|
2008-07-09 23:47:23 +04:00
|
|
|
int ath_cardbus_match(device_t, cfdata_t, void *);
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
void ath_cardbus_attach(device_t, device_t, void *);
|
|
|
|
int ath_cardbus_detach(device_t, int);
|
2003-10-14 21:47:03 +04:00
|
|
|
|
2008-07-09 23:47:23 +04:00
|
|
|
CFATTACH_DECL_NEW(ath_cardbus, sizeof(struct ath_cardbus_softc),
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
ath_cardbus_match, ath_cardbus_attach, ath_cardbus_detach, NULL);
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
void ath_cardbus_setup(struct ath_cardbus_softc *);
|
|
|
|
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
static bool
|
|
|
|
ath_cardbus_suspend(device_t self PMF_FN_ARGS)
|
|
|
|
{
|
|
|
|
struct ath_cardbus_softc *csc = device_private(self);
|
|
|
|
|
|
|
|
ath_suspend(&csc->sc_ath);
|
|
|
|
if (csc->sc_ih != NULL) {
|
|
|
|
cardbus_intr_disestablish(csc->sc_ct->ct_cc, csc->sc_ct->ct_cf,
|
|
|
|
csc->sc_ih);
|
|
|
|
csc->sc_ih = NULL;
|
|
|
|
}
|
|
|
|
return true;
|
|
|
|
}
|
2007-12-09 23:27:42 +03:00
|
|
|
|
|
|
|
static bool
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
ath_cardbus_resume(device_t self PMF_FN_ARGS)
|
2007-12-09 23:27:42 +03:00
|
|
|
{
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
struct ath_cardbus_softc *csc = device_private(self);
|
|
|
|
|
|
|
|
csc->sc_ih = cardbus_intr_establish(csc->sc_ct->ct_cc,
|
|
|
|
csc->sc_ct->ct_cf, csc->sc_intrline, IPL_NET, ath_intr,
|
|
|
|
&csc->sc_ath);
|
|
|
|
|
|
|
|
if (csc->sc_ih == NULL) {
|
|
|
|
aprint_error_dev(self,
|
2008-06-24 23:44:51 +04:00
|
|
|
"unable to establish interrupt\n");
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ath_resume(&csc->sc_ath);
|
2007-12-09 23:27:42 +03:00
|
|
|
}
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
int
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
ath_cardbus_match(device_t parent, struct cfdata *match, void *aux)
|
2003-10-14 21:47:03 +04:00
|
|
|
{
|
|
|
|
struct cardbus_attach_args *ca = aux;
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
const char *devname;
|
2003-10-14 21:47:03 +04:00
|
|
|
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
devname = ath_hal_probe(PCI_VENDOR(ca->ca_id), PCI_PRODUCT(ca->ca_id));
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
if (devname)
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
return 1;
|
2003-10-14 21:47:03 +04:00
|
|
|
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
return 0;
|
2003-10-14 21:47:03 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
void
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
ath_cardbus_attach(device_t parent, device_t self, void *aux)
|
2003-10-14 21:47:03 +04:00
|
|
|
{
|
2006-03-29 10:22:38 +04:00
|
|
|
struct ath_cardbus_softc *csc = device_private(self);
|
2003-10-14 21:47:03 +04:00
|
|
|
struct ath_softc *sc = &csc->sc_ath;
|
|
|
|
struct cardbus_attach_args *ca = aux;
|
|
|
|
cardbus_devfunc_t ct = ca->ca_ct;
|
|
|
|
bus_addr_t adr;
|
|
|
|
|
2008-07-09 23:47:23 +04:00
|
|
|
sc->sc_dev = self;
|
2003-10-14 21:47:03 +04:00
|
|
|
sc->sc_dmat = ca->ca_dmat;
|
|
|
|
csc->sc_ct = ct;
|
|
|
|
csc->sc_tag = ca->ca_tag;
|
|
|
|
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
aprint_normal("\n");
|
2006-07-14 17:37:25 +04:00
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
/*
|
|
|
|
* Map the device.
|
|
|
|
*/
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
if (Cardbus_mapreg_map(ct, ATH_PCI_MMBA, PCI_MAPREG_TYPE_MEM, 0,
|
2006-06-05 09:14:37 +04:00
|
|
|
&csc->sc_iot, &csc->sc_ioh, &adr, &csc->sc_mapsize) == 0) {
|
2003-10-14 21:47:03 +04:00
|
|
|
#if rbus
|
|
|
|
#else
|
|
|
|
(*ct->ct_cf->cardbus_mem_open)(cc, 0, adr, adr+csc->sc_mapsize);
|
|
|
|
#endif
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
csc->sc_bar_val = adr | PCI_MAPREG_TYPE_MEM;
|
|
|
|
} else {
|
|
|
|
aprint_error_dev(self, "unable to map device registers\n");
|
2003-10-14 21:47:03 +04:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2006-06-05 09:14:37 +04:00
|
|
|
sc->sc_st = HALTAG(csc->sc_iot);
|
|
|
|
sc->sc_sh = HALHANDLE(csc->sc_ioh);
|
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
/*
|
|
|
|
* Set up the PCI configuration registers.
|
|
|
|
*/
|
|
|
|
ath_cardbus_setup(csc);
|
|
|
|
|
|
|
|
/* Remember which interrupt line. */
|
|
|
|
csc->sc_intrline = ca->ca_intrline;
|
|
|
|
|
2007-12-21 21:26:13 +03:00
|
|
|
ATH_LOCK_INIT(sc);
|
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
/*
|
|
|
|
* Finish off the attach.
|
|
|
|
*/
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
if (ath_attach(PCI_PRODUCT(ca->ca_id), sc) != 0)
|
|
|
|
return;
|
|
|
|
|
|
|
|
if (!pmf_device_register(self, ath_cardbus_suspend, ath_cardbus_resume))
|
|
|
|
aprint_error_dev(self, "couldn't establish power handler\n");
|
|
|
|
else {
|
|
|
|
pmf_class_network_register(self, &sc->sc_if);
|
|
|
|
pmf_device_suspend_self(self);
|
|
|
|
}
|
2003-10-14 21:47:03 +04:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
ath_cardbus_detach(device_t self, int flags)
|
2003-10-14 21:47:03 +04:00
|
|
|
{
|
2006-03-29 10:22:38 +04:00
|
|
|
struct ath_cardbus_softc *csc = device_private(self);
|
2003-10-14 21:47:03 +04:00
|
|
|
struct ath_softc *sc = &csc->sc_ath;
|
|
|
|
struct cardbus_devfunc *ct = csc->sc_ct;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
#if defined(DIAGNOSTIC)
|
|
|
|
if (ct == NULL)
|
2008-04-06 11:54:17 +04:00
|
|
|
panic("%s: data structure lacks", device_xname(&sc->sc_dev));
|
2003-10-14 21:47:03 +04:00
|
|
|
#endif
|
|
|
|
|
|
|
|
rv = ath_detach(sc);
|
|
|
|
if (rv)
|
|
|
|
return (rv);
|
|
|
|
|
2007-12-09 23:27:42 +03:00
|
|
|
pmf_device_deregister(self);
|
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
/*
|
|
|
|
* Unhook the interrupt handler.
|
|
|
|
*/
|
2007-12-22 03:39:47 +03:00
|
|
|
if (csc->sc_ih != NULL) {
|
2003-10-14 21:47:03 +04:00
|
|
|
cardbus_intr_disestablish(ct->ct_cc, ct->ct_cf, csc->sc_ih);
|
|
|
|
csc->sc_ih = NULL;
|
2007-12-22 03:39:47 +03:00
|
|
|
}
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Release bus space and close window.
|
|
|
|
*/
|
2006-06-07 19:30:48 +04:00
|
|
|
Cardbus_mapreg_unmap(ct, ATH_PCI_MMBA, csc->sc_iot, csc->sc_ioh,
|
|
|
|
csc->sc_mapsize);
|
2003-10-14 21:47:03 +04:00
|
|
|
|
2007-12-21 21:26:13 +03:00
|
|
|
ATH_LOCK_DESTROY(sc);
|
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
void
|
|
|
|
ath_cardbus_setup(struct ath_cardbus_softc *csc)
|
|
|
|
{
|
|
|
|
cardbus_devfunc_t ct = csc->sc_ct;
|
|
|
|
cardbus_chipset_tag_t cc = ct->ct_cc;
|
|
|
|
cardbus_function_tag_t cf = ct->ct_cf;
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
int rc;
|
2003-10-14 21:47:03 +04:00
|
|
|
pcireg_t reg;
|
2004-05-09 03:40:01 +04:00
|
|
|
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
if ((rc = cardbus_set_powerstate(ct, csc->sc_tag, PCI_PWR_D0)) != 0)
|
|
|
|
aprint_debug("%s: cardbus_set_powerstate %d\n", __func__, rc);
|
2003-10-14 21:47:03 +04:00
|
|
|
|
|
|
|
/* Program the BAR. */
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
cardbus_conf_write(cc, cf, csc->sc_tag, ATH_PCI_MMBA, csc->sc_bar_val);
|
2004-07-22 19:48:17 +04:00
|
|
|
|
2003-10-14 21:47:03 +04:00
|
|
|
/* Enable the appropriate bits in the PCI CSR. */
|
|
|
|
reg = cardbus_conf_read(cc, cf, csc->sc_tag,
|
Use device_t and its accessors throughout. Use aprint_*_dev().
Improve PMF-ability.
Add a 'flags' argument to suspend/resume handlers and
callers such as pmf_system_suspend().
Define a flag, PMF_F_SELF, which indicates to PMF that a
device is suspending/resuming itself. Add helper routines,
pmf_device_suspend_self(dev) and pmf_device_resume_self(dev),
that call pmf_device_suspend(dev, PMF_F_SELF) and
pmf_device_resume(dev, PMF_F_SELF), respectively. Use
PMF_F_SELF to suspend/resume self in ath(4), audio(4),
rtw(4), and sip(4).
In ath(4) and in rtw(4), replace the icky sc_enable/sc_disable
callbacks, provided by the bus front-end, with
self-suspension/resumption. Also, clean up the bus
front-ends. Make sure that the interrupt handler is
disestablished during suspension. Get rid of driver-private
flags (e.g., RTW_F_ENABLED, ath_softc->sc_invalid); use
device_is_active()/device_has_power() calls, instead.
In the network-class suspend handler, call if_stop(, 0)
instead of if_stop(, 1), because the latter is superfluous
(bus- and driver-suspension hooks will 'disable' the NIC),
and it may cause recursion.
In the network-class resume handler, prevent infinite
recursion through if_init() by getting out early if we are
self-suspending (PMF_F_SELF).
rtw(4) improvements:
Destroy rtw(4) callouts when we detach it. Make rtw at
pci detachable. Print some more information with the "rx
frame too long" warning.
Remove activate() methods:
Get rid of rtw_activate() and ath_activate(). The device
activate() methods are not good for much these days.
Make ath at cardbus resume with crypto functions intact:
Introduce a boolean device property, "pmf-powerdown". If
pmf-powerdown is present and false, it indicates that a
bus back-end should not remove power from a device.
Honor this property in cardbus_child_suspend().
Set this property to 'false' in ath_attach(), since removing
power from an ath at cardbus seems to lobotomize the WPA
crypto engine. XXX Should the pmf-powerdown property
propagate toward the root of the device tree?
Miscellaneous ath(4) changes:
Warn if ath(4) tries to write crypto keys to suspended
hardware.
Reduce differences between FreeBSD and NetBSD in ath(4)
multicast filter setup.
Make ath_printrxbuf() print an rx descriptor's status &
key index, to help debug crypto errors.
Shorten a staircase in ath_ioctl(). Don't check for
ieee80211_ioctl() return code ERESTART, it never happens.
2008-03-12 21:02:21 +03:00
|
|
|
PCI_COMMAND_STATUS_REG);
|
|
|
|
reg |= PCI_COMMAND_MASTER_ENABLE | PCI_COMMAND_MEM_ENABLE;
|
|
|
|
cardbus_conf_write(cc, cf, csc->sc_tag, PCI_COMMAND_STATUS_REG, reg);
|
2003-10-14 21:47:03 +04:00
|
|
|
}
|