NetBSD/etc/rc.d/raidframe

#!/bin/sh
#
# $NetBSD: raidframe,v 1.7 2002/09/03 15:35:55 abs Exp $
#

# PROVIDE: disks

. /etc/rc.subr

name="raidframe"
start_cmd="raidframe_start"
stop_cmd=":"

raidframe_start()
{
	# Configure non-auto-configured raid devices.
	# Ensure order by globbing raid[0-9].conf before raid[1-9][0-9].conf.
	#
	for cfg in /etc/raid[0-9].conf /etc/raid[1-9][0-9].conf ; do
		[ ! -f $cfg ] && continue
		dev=${cfg##*/}
		dev=${dev%%.conf}
		raidctl -c $cfg $dev
	done
}

load_rc_config $name
run_rc_command "$1"
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00			`#!/bin/sh`
			`#`
Split raidframe parity checking/rebuild out into raidframeparity, which is called after quota so we don't end up with fsck and raidframe parity rebuild taking forever after a crash/reboot. While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not raid[0-9].conf & raid[0-9][0-9].conf 2002-09-03 19:35:51 +04:00			`# $NetBSD: raidframe,v 1.7 2002/09/03 15:35:55 abs Exp $`
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00			`#`

Make ccd and raidframe provide `disks', and make swap1 and fsck depend on `disks', rather than `ccd' and `raidframe'. 2000-04-26 09:13:51 +04:00			`# PROVIDE: disks`
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00
			`. /etc/rc.subr`

			`name="raidframe"`
			`start_cmd="raidframe_start"`
			`stop_cmd=":"`

			`raidframe_start()`
			`{`
use the recently added hw.disknames value from sysctl(8) to determine the list of currently configured disk devices, and start raid parity rebuilds on devices which match "raid[0-9]*" 2002-01-27 17:16:33 +03:00			`# Configure non-auto-configured raid devices.`
Split raidframe parity checking/rebuild out into raidframeparity, which is called after quota so we don't end up with fsck and raidframe parity rebuild taking forever after a crash/reboot. While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not raid[0-9].conf & raid[0-9][0-9].conf 2002-09-03 19:35:51 +04:00			`# Ensure order by globbing raid[0-9].conf before raid[1-9][0-9].conf.`
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00			`#`
Split raidframe parity checking/rebuild out into raidframeparity, which is called after quota so we don't end up with fsck and raidframe parity rebuild taking forever after a crash/reboot. While we are here check for raid[0-9].conf & raid[1-9][0-9].conf not raid[0-9].conf & raid[0-9][0-9].conf 2002-09-03 19:35:51 +04:00			`for cfg in /etc/raid[0-9].conf /etc/raid[1-9][0-9].conf ; do`
start all raid[0-9].conf and raid[0-9][0-9].conf, not just raid[0-3].conf. do in order, so that raidN.conf is started before raidNN.conf. 2000-11-17 08:43:46 +03:00			`[ ! -f $cfg ] && continue`
			`dev=${cfg##*/}`
			`dev=${dev%%.conf}`
			`raidctl -c $cfg $dev`
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00			`done`
			`}`

Use load_rc_config() (from rc.subr) instead of sourcing /etc/rc.conf. This allows us or a user to change the configuration file method in one place - rc.subr - without having to edit all of the rc.d/* files. 2000-05-13 12:45:06 +04:00			`load_rc_config $name`
rc.d scripts derived from /etc/rc 2000-03-10 14:53:23 +03:00			`run_rc_command "$1"`