NetBSD/sys/arch/atari/dev/grf_etreg.h

241 lines
7.2 KiB
C
Raw Normal View History

/* $NetBSD: grf_etreg.h,v 1.1 1996/10/04 07:27:53 leo Exp $ */
/*
* Copyright (c) 1996 Tobias Abt
* Copyright (c) 1995 Ezra Story
* Copyright (c) 1995 Kari Mettinen
* Copyright (c) 1994 Markus Wild
* Copyright (c) 1994 Lutz Vieweg
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Lutz Vieweg.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _GRF_ETREG_H
#define _GRF_ETREG_H
/*
* Written & Copyright by Kari Mettinen, Ezra Story.
*
* This is derived from Cirrus driver source
*/
/*
* read/write VGA registers
*/
#define vgar(ba, reg) (*(((volatile u_char *)ba)+reg))
#define vgaw(ba, reg, val) *(((volatile u_char *)ba)+reg) = ((u_char)val)
/*
* defines for the used register addresses (mw)
*
* NOTE: there are some registers that have different addresses when
* in mono or color mode. We only support color mode, and thus
* some addresses won't work in mono-mode!
*
* General and VGA-registers taken from retina driver. Fixed a few
* bugs in it. (SR and GR read address is Port + 1, NOT Port)
*
*/
/* General Registers: */
#define GREG_STATUS0_R 0x03C2
#define GREG_STATUS1_R 0x03DA
#define GREG_MISC_OUTPUT_R 0x03CC
#define GREG_MISC_OUTPUT_W 0x03C2
#define GREG_FEATURE_CONTROL_R 0x03CA
#define GREG_FEATURE_CONTROL_W 0x03DA
#define GREG_POS 0x0102
#define GREG_HERCULESCOMPAT 0x03BF
#define GREG_VIDEOSYSENABLE 0x03C3
#define GREG_DISPMODECONTROL 0x03D8
#define GREG_COLORSELECT 0x03D9
#define GREG_ATNTMODECONTROL 0x03DE
#define GREG_SEGMENTSELECT 0x03CD
/* Attribute Controller: */
#define ACT_ADDRESS 0x03C0
#define ACT_ADDRESS_R 0x03C1
#define ACT_ADDRESS_W 0x03C0
#define ACT_ADDRESS_RESET 0x03DA
#define ACT_ID_PALETTE0 0x00
#define ACT_ID_PALETTE1 0x01
#define ACT_ID_PALETTE2 0x02
#define ACT_ID_PALETTE3 0x03
#define ACT_ID_PALETTE4 0x04
#define ACT_ID_PALETTE5 0x05
#define ACT_ID_PALETTE6 0x06
#define ACT_ID_PALETTE7 0x07
#define ACT_ID_PALETTE8 0x08
#define ACT_ID_PALETTE9 0x09
#define ACT_ID_PALETTE10 0x0A
#define ACT_ID_PALETTE11 0x0B
#define ACT_ID_PALETTE12 0x0C
#define ACT_ID_PALETTE13 0x0D
#define ACT_ID_PALETTE14 0x0E
#define ACT_ID_PALETTE15 0x0F
#define ACT_ID_ATTR_MODE_CNTL 0x10
#define ACT_ID_OVERSCAN_COLOR 0x11
#define ACT_ID_COLOR_PLANE_ENA 0x12
#define ACT_ID_HOR_PEL_PANNING 0x13
#define ACT_ID_COLOR_SELECT 0x14
#define ACT_ID_MISCELLANEOUS 0x16
/* Graphics Controller: */
#define GCT_ADDRESS 0x03CE
#define GCT_ADDRESS_R 0x03CF
#define GCT_ADDRESS_W 0x03CF
#define GCT_ID_SET_RESET 0x00
#define GCT_ID_ENABLE_SET_RESET 0x01
#define GCT_ID_COLOR_COMPARE 0x02
#define GCT_ID_DATA_ROTATE 0x03
#define GCT_ID_READ_MAP_SELECT 0x04
#define GCT_ID_GRAPHICS_MODE 0x05
#define GCT_ID_MISC 0x06
#define GCT_ID_COLOR_XCARE 0x07
#define GCT_ID_BITMASK 0x08
/* Sequencer: */
#define SEQ_ADDRESS 0x03C4
#define SEQ_ADDRESS_R 0x03C5
#define SEQ_ADDRESS_W 0x03C5
#define SEQ_ID_RESET 0x00
#define SEQ_ID_CLOCKING_MODE 0x01
#define SEQ_ID_MAP_MASK 0x02
#define SEQ_ID_CHAR_MAP_SELECT 0x03
#define SEQ_ID_MEMORY_MODE 0x04
#define SEQ_ID_STATE_CONTROL 0x06
#define SEQ_ID_AUXILIARY_MODE 0x07
/* CRT Controller: */
#define CRT_ADDRESS 0x03D4
#define CRT_ADDRESS_R 0x03D5
#define CRT_ADDRESS_W 0x03D5
#define CRT_ID_HOR_TOTAL 0x00
#define CRT_ID_HOR_DISP_ENA_END 0x01
#define CRT_ID_START_HOR_BLANK 0x02
#define CRT_ID_END_HOR_BLANK 0x03
#define CRT_ID_START_HOR_RETR 0x04
#define CRT_ID_END_HOR_RETR 0x05
#define CRT_ID_VER_TOTAL 0x06
#define CRT_ID_OVERFLOW 0x07
#define CRT_ID_PRESET_ROW_SCAN 0x08
#define CRT_ID_MAX_ROW_ADDRESS 0x09
#define CRT_ID_CURSOR_START 0x0A
#define CRT_ID_CURSOR_END 0x0B
#define CRT_ID_START_ADDR_HIGH 0x0C
#define CRT_ID_START_ADDR_LOW 0x0D
#define CRT_ID_CURSOR_LOC_HIGH 0x0E
#define CRT_ID_CURSOR_LOC_LOW 0x0F
#define CRT_ID_START_VER_RETR 0x10
#define CRT_ID_END_VER_RETR 0x11
#define CRT_ID_VER_DISP_ENA_END 0x12
#define CRT_ID_OFFSET 0x13
#define CRT_ID_UNDERLINE_LOC 0x14
#define CRT_ID_START_VER_BLANK 0x15
#define CRT_ID_END_VER_BLANK 0x16
#define CRT_ID_MODE_CONTROL 0x17
#define CRT_ID_LINE_COMPARE 0x18
#define CRT_ID_SEGMENT_COMP 0x30
#define CRT_ID_GENERAL_PURPOSE 0x31
#define CRT_ID_RASCAS_CONFIG 0x32
#define CTR_ID_EXT_START 0x33
#define CRT_ID_6845_COMPAT 0x34
#define CRT_ID_OVERFLOW_HIGH 0x35
#define CRT_ID_VIDEO_CONFIG1 0x36
#define CRT_ID_VIDEO_CONFIG2 0x37
#define CRT_ID_HOR_OVERFLOW 0x3f
/* Video DAC */
#define VDAC_ADDRESS 0x03c8
#define VDAC_ADDRESS_W 0x03c8
#define VDAC_ADDRESS_R 0x03c7
#define VDAC_STATE 0x03c7
#define VDAC_DATA 0x03c9
#define VDAC_MASK 0x03c6
#define HDR 0x03c6 /* Hidden DAC regs, 4 reads to access */
#define VDAC_COMMAND 0x03c6
#define VDAC_XINDEX 0x03c7
#define VDAC_XDATA 0x03c8
#define WGfx(ba, idx, val) \
do { \
vgaw(ba, GCT_ADDRESS, idx); \
vgaw(ba, GCT_ADDRESS_W , val); \
} while (0)
#define WSeq(ba, idx, val) \
do { \
vgaw(ba, SEQ_ADDRESS, idx); \
vgaw(ba, SEQ_ADDRESS_W , val); \
} while (0)
#define WCrt(ba, idx, val) \
do { \
vgaw(ba, CRT_ADDRESS, idx); \
vgaw(ba, CRT_ADDRESS_W , val); \
} while (0)
#define WIma(ba, idx, val) \
do { \
vgaw(ba, IMA_ADDRESS, idx); \
vgaw(ba, IMA_ADDRESS_W , val); \
} while (0)
#define WAttr(ba, idx, val) \
do { \
if(vgar(ba, GREG_STATUS1_R)) \
; \
vgaw(ba, ACT_ADDRESS_W, idx); \
vgaw(ba, ACT_ADDRESS_W, val); \
} while (0)
static inline u_char RAttr(volatile void * ba, short idx) {
if(vgar(ba, GREG_STATUS1_R))
;
vgaw(ba, ACT_ADDRESS_W, idx);
return vgar(ba, ACT_ADDRESS_R);
}
static inline u_char RSeq(volatile void * ba, short idx) {
vgaw(ba, SEQ_ADDRESS, idx);
return vgar(ba, SEQ_ADDRESS_R);
}
static inline u_char RCrt(volatile void * ba, short idx) {
vgaw(ba, CRT_ADDRESS, idx);
return vgar(ba, CRT_ADDRESS_R);
}
static inline u_char RGfx(volatile void * ba, short idx) {
vgaw(ba, GCT_ADDRESS, idx);
return vgar(ba, GCT_ADDRESS_R);
}
#endif /* _GRF_ETREG_H */