NetBSD/sys/arch/sparc/dev/swreg.h

109 lines
4.3 KiB
C
Raw Normal View History

2000-06-26 23:54:08 +04:00
/* $NetBSD: swreg.h,v 1.1 2000/06/26 19:54:09 pk Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Register map for the Sun3 SCSI Interface (si)
* The first part of this register map is an NCR5380
* SCSI Bus Interface Controller (SBIC). The rest is a
* DMA controller and custom logic for the OBIO interface (3/50,3/60,4/110)
*
* Modified for Sun 4 systems by Jason R. Thorpe <thorpej@NetBSD.ORG>.
*/
/*
* Note that the obio version on the 4/1xx (the so-called "SCSI Weird", or
* "sw" controller) is laid out a bit differently, and hence the evilness
* with unions. Also, the "sw" doesn't appear to have a FIFO.
*/
#if __for_reference_only__
struct sw_regs {
/*
* Am5380 Register map (no padding). See dev/ic/ncr5380reg.h
*/
struct ncr5380regs {
u_char r[8];
} sci;
/* DMA controller registers on OBIO */
u_int dma_addr; /* dma address */
u_int dma_count; /* dma count */
u_int pad0; /* no-existent register */
u_int sw_csr; /* sw control/status */
u_int bpr; /* sw byte pack */
};
#endif
/*
* Size of NCR5380 registers located at the bottom of the register bank.
*/
#define NCR5380REGS_SZ 8
/*
* Register definition for the `sw' OBIO controller
*/
#define SWREG_DMA_ADDR (NCR5380REGS_SZ + 0)
#define SWREG_DMA_CNT (NCR5380REGS_SZ + 4)
#define SWREG_CSR (NCR5380REGS_SZ + 12)
#define SWREG_BPR (NCR5380REGS_SZ + 16)
#define SWREG_BANK_SZ (NCR5380REGS_SZ + 20)
/*
* Status Register.
* Note:
* (r) indicates bit is read only.
* (rw) indicates bit is read or write.
* (v) vme host adaptor interface only.
* (o) sun3/50 onboard host adaptor interface only.
* (b) both vme and sun3/50 host adaptor interfaces.
*/
#define SW_CSR_DMA_ACTIVE 0x8000 /* (r,o) dma transfer active */
#define SW_CSR_DMA_CONFLICT 0x4000 /* (r,b) reg accessed while dmaing */
#define SW_CSR_DMA_BUS_ERR 0x2000 /* (r,b) bus error during dma */
#define SW_CSR_ID 0x1000 /* (r,b) 0 for 3/50, 1 for SCSI-3, */
/* 0 if SCSI-3 unmodified */
#define SW_CSR_FIFO_FULL 0x0800 /* (r,b) fifo full */
#define SW_CSR_FIFO_EMPTY 0x0400 /* (r,b) fifo empty */
#define SW_CSR_SBC_IP 0x0200 /* (r,b) sbc interrupt pending */
#define SW_CSR_DMA_IP 0x0100 /* (r,b) dma interrupt pending */
#define SW_CSR_DMA_EN 0x0010 /* (rw,v) dma/interrupt enable */
#define SW_CSR_SEND 0x0008 /* (rw,b) dma dir, 1=to device */
#define SW_CSR_INTR_EN 0x0004 /* (rw,b) interrupts enable */
#define SW_CSR_FIFO_RES 0x0002 /* (rw,b) inits fifo, 0=reset */
#define SW_CSR_SCSI_RES 0x0001 /* (rw,b) reset sbc and udc, 0=reset */