2000-10-21 17:48:06 +04:00
|
|
|
/* $NetBSD: stand.h,v 1.41 2000/10/21 13:48:06 takemura Exp $ */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Copyright (c) 1999 Christopher G. Demetriou. All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
|
* This product includes software developed by Christopher G. Demetriou
|
|
|
|
|
* for the NetBSD Project.
|
|
|
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*/
|
1994-10-26 08:44:32 +03:00
|
|
|
|
1994-01-26 05:03:32 +03:00
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 1993
|
|
|
|
|
* The Regents of the University of California. All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
|
* This product includes software developed by the University of
|
|
|
|
|
* California, Berkeley and its contributors.
|
|
|
|
|
* 4. Neither the name of the University nor the names of its contributors
|
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
|
*
|
1994-10-26 08:44:32 +03:00
|
|
|
* @(#)stand.h 8.1 (Berkeley) 6/11/93
|
1994-01-26 05:03:32 +03:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
#include <sys/stat.h>
|
|
|
|
|
#include "saioctl.h"
|
|
|
|
|
#include "saerrno.h"
|
|
|
|
|
|
|
|
|
|
#ifndef NULL
|
|
|
|
|
#define NULL 0
|
|
|
|
|
#endif
|
|
|
|
|
|
2000-10-21 17:48:06 +04:00
|
|
|
#ifdef LIBSA_RENAME_PRINTF
|
|
|
|
|
#define getchar libsa_getchar
|
|
|
|
|
#define gets libsa_gets
|
|
|
|
|
#define printf libsa_printf
|
|
|
|
|
#define putchar libsa_putchar
|
|
|
|
|
#define sprintf libsa_sprintf
|
|
|
|
|
#define vprintf libsa_vprintf
|
|
|
|
|
#define vsprintf libsa_vsprintf
|
|
|
|
|
#endif
|
1999-02-22 13:08:42 +03:00
|
|
|
#ifdef LIBSA_USE_MEMSET
|
|
|
|
|
#define bzero(s, l) memset(s, 0, l)
|
|
|
|
|
#endif
|
|
|
|
|
#ifdef LIBSA_USE_MEMCPY
|
|
|
|
|
#define bcopy(s, d, l) memcpy(d, s, l) /* For non-overlapping copies only */
|
|
|
|
|
#endif
|
|
|
|
|
|
1994-01-26 05:03:32 +03:00
|
|
|
struct open_file;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* This structure is used to define file system operations in a file system
|
|
|
|
|
* independent way.
|
|
|
|
|
*/
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_SINGLE_FILESYSTEM)
|
1994-01-26 05:03:32 +03:00
|
|
|
struct fs_ops {
|
|
|
|
|
int (*open) __P((char *path, struct open_file *f));
|
|
|
|
|
int (*close) __P((struct open_file *f));
|
1995-09-17 04:49:37 +04:00
|
|
|
int (*read) __P((struct open_file *f, void *buf,
|
1995-09-15 03:45:21 +04:00
|
|
|
size_t size, size_t *resid));
|
1995-09-17 04:49:37 +04:00
|
|
|
int (*write) __P((struct open_file *f, void *buf,
|
1995-09-15 03:45:21 +04:00
|
|
|
size_t size, size_t *resid));
|
1994-01-26 05:03:32 +03:00
|
|
|
off_t (*seek) __P((struct open_file *f, off_t offset, int where));
|
|
|
|
|
int (*stat) __P((struct open_file *f, struct stat *sb));
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
extern struct fs_ops file_system[];
|
1996-01-14 01:25:32 +03:00
|
|
|
extern int nfsys;
|
1994-01-26 05:03:32 +03:00
|
|
|
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#define FS_OPEN(fs) ((fs)->open)
|
|
|
|
|
#define FS_CLOSE(fs) ((fs)->close)
|
|
|
|
|
#define FS_READ(fs) ((fs)->read)
|
|
|
|
|
#define FS_WRITE(fs) ((fs)->write)
|
|
|
|
|
#define FS_SEEK(fs) ((fs)->seek)
|
|
|
|
|
#define FS_STAT(fs) ((fs)->stat)
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
#define FS_OPEN(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_open)
|
|
|
|
|
#define FS_CLOSE(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_close)
|
|
|
|
|
#define FS_READ(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_read)
|
|
|
|
|
#define FS_WRITE(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_write)
|
|
|
|
|
#define FS_SEEK(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_seek)
|
|
|
|
|
#define FS_STAT(fs) ___CONCAT(LIBSA_SINGLE_FILESYSTEM,_stat)
|
|
|
|
|
|
|
|
|
|
int FS_OPEN(unused) __P((char *path, struct open_file *f));
|
|
|
|
|
int FS_CLOSE(unused) __P((struct open_file *f));
|
|
|
|
|
int FS_READ(unused) __P((struct open_file *f, void *buf,
|
|
|
|
|
size_t size, size_t *resid));
|
|
|
|
|
int FS_WRITE(unused) __P((struct open_file *f, void *buf,
|
|
|
|
|
size_t size, size_t *resid));
|
|
|
|
|
off_t FS_SEEK(unused) __P((struct open_file *f, off_t offset, int where));
|
|
|
|
|
int FS_STAT(unused) __P((struct open_file *f, struct stat *sb));
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
1994-01-26 05:03:32 +03:00
|
|
|
/* where values for lseek(2) */
|
|
|
|
|
#define SEEK_SET 0 /* set file offset to offset */
|
|
|
|
|
#define SEEK_CUR 1 /* set file offset to current plus offset */
|
|
|
|
|
#define SEEK_END 2 /* set file offset to EOF plus offset */
|
|
|
|
|
|
|
|
|
|
/* Device switch */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_SINGLE_DEVICE)
|
|
|
|
|
|
1994-01-26 05:03:32 +03:00
|
|
|
struct devsw {
|
|
|
|
|
char *dv_name;
|
|
|
|
|
int (*dv_strategy) __P((void *devdata, int rw,
|
1995-09-15 03:45:21 +04:00
|
|
|
daddr_t blk, size_t size,
|
|
|
|
|
void *buf, size_t *rsize));
|
1994-01-26 05:03:32 +03:00
|
|
|
int (*dv_open) __P((struct open_file *f, ...));
|
|
|
|
|
int (*dv_close) __P((struct open_file *f));
|
1994-10-31 00:43:03 +03:00
|
|
|
int (*dv_ioctl) __P((struct open_file *f, u_long cmd, void *data));
|
1994-01-26 05:03:32 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
extern struct devsw devsw[]; /* device array */
|
|
|
|
|
extern int ndevs; /* number of elements in devsw[] */
|
|
|
|
|
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#define DEV_NAME(d) ((d)->dv_name)
|
|
|
|
|
#define DEV_STRATEGY(d) ((d)->dv_strategy)
|
|
|
|
|
#define DEV_OPEN(d) ((d)->dv_open)
|
|
|
|
|
#define DEV_CLOSE(d) ((d)->dv_close)
|
|
|
|
|
#define DEV_IOCTL(d) ((d)->dv_ioctl)
|
|
|
|
|
|
|
|
|
|
#else
|
|
|
|
|
|
|
|
|
|
#define DEV_NAME(d) ___STRING(LIBSA_SINGLE_DEVICE)
|
|
|
|
|
#define DEV_STRATEGY(d) ___CONCAT(LIBSA_SINGLE_DEVICE,strategy)
|
|
|
|
|
#define DEV_OPEN(d) ___CONCAT(LIBSA_SINGLE_DEVICE,open)
|
|
|
|
|
#define DEV_CLOSE(d) ___CONCAT(LIBSA_SINGLE_DEVICE,close)
|
|
|
|
|
#define DEV_IOCTL(d) ___CONCAT(LIBSA_SINGLE_DEVICE,ioctl)
|
|
|
|
|
|
|
|
|
|
int DEV_STRATEGY(unused) __P((void *devdata, int rw, daddr_t blk,
|
|
|
|
|
size_t size, void *buf, size_t *rsize));
|
|
|
|
|
int DEV_OPEN(unused) __P((struct open_file *f, ...));
|
|
|
|
|
int DEV_CLOSE(unused) __P((struct open_file *f));
|
|
|
|
|
int DEV_IOCTL(unused) __P((struct open_file *f, u_long cmd, void *data));
|
|
|
|
|
|
|
|
|
|
#endif
|
|
|
|
|
|
1994-01-26 05:03:32 +03:00
|
|
|
struct open_file {
|
|
|
|
|
int f_flags; /* see F_* below */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_SINGLE_DEVICE)
|
1994-01-26 05:03:32 +03:00
|
|
|
struct devsw *f_dev; /* pointer to device operations */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#endif
|
1994-01-26 05:03:32 +03:00
|
|
|
void *f_devdata; /* device specific data */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_SINGLE_FILESYSTEM)
|
1994-01-26 05:03:32 +03:00
|
|
|
struct fs_ops *f_ops; /* pointer to file system operations */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#endif
|
1994-01-26 05:03:32 +03:00
|
|
|
void *f_fsdata; /* file system specific data */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_NO_RAW_ACCESS)
|
1996-06-22 00:09:03 +04:00
|
|
|
off_t f_offset; /* current file offset (F_RAW) */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#endif
|
1994-01-26 05:03:32 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
|
|
#define SOPEN_MAX 4
|
1995-04-22 17:57:03 +04:00
|
|
|
extern struct open_file files[];
|
1994-01-26 05:03:32 +03:00
|
|
|
|
|
|
|
|
/* f_flags values */
|
|
|
|
|
#define F_READ 0x0001 /* file opened for reading */
|
|
|
|
|
#define F_WRITE 0x0002 /* file opened for writing */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#if !defined(LIBSA_NO_RAW_ACCESS)
|
1994-01-26 05:03:32 +03:00
|
|
|
#define F_RAW 0x0004 /* raw device open - no file system */
|
Make a bunch of backward-compatible changes to the boot blocks which allow
size to be reduced substantially. (backward compatibility verified
by compiling one of the alpha boot blocks which uses all of the code
before and after, diffing the object files, and manually verifying that
the differences were 'correct'. some differences were "unavoidable,"
it wanting to avoid a double-commit, because e.g. local variables which
were previously used were no longer used.) a README which describes
supported options (or at least the ones mentioned below) is forthcoming.
add support for the preprocessor macro LIBSA_NO_TWIDDLE, which
causes calls to twiddle() to be omitted if it's defined.
add support for the preprocessor macros:
LIBSA_NO_FS_CLOSE
LIBSA_NO_FS_WRITE
LIBSA_NO_FS_SEEK
which, if defined, cause the corresponding file system operations
in the individual file system implementations to be omitted. (note
that all of those macros are not supported by all file systems at
this point. comments were added to individual file system files
to indicate lack of support, and should be cleaned up later. Backward
compatibility options e.g. UFS_NOCLOSE, etc., are supported.)
add support for the preprocessor macro LIBSA_NO_FS_SYMLINK, which
removes support for symbolic links from the file system support
functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_FS_SINGLECOMPONENT which
removes all subdirectory and symlink support from the file system
support functions. (same notes as for the macros above apply.)
add support for the preprocessor macro LIBSA_NO_FD_CHECKING, which
causes code relating to libsa file descriptor checks (e.g. range
checking and checking that a file descriptor is valid) to be
omitted if it's defined.
add support for the preprocessor macro LIBSA_NO_RAW_ACCESS, which
causes code relating to raw device access to be omitted if it's
defined.
change some structure copies to use bcopy() instead. that way
use of bcopy vs. memcpy() can easily be selected by
LIBSA_USE_MEMCPY. (without changes like these, you could end up
having both bcopy() and memcpy() included. eventually, all
calls to bcopy should be changed to calls to memcpy() or memmove()
as appropriate -- hopefully never the latter -- with an option to
use bcopy instead.)
add support for the preprocessor macro LIBSA_NO_DISKLABEL_MSGS, which
causes disklabel() to return '1' as msg rather than a string. Can
be used if the boot blocks don't care about the string, and need to
save the space.
add support for the preprocessor macro LIBSA_SINGLE_FILESYSTEM, which
if defined causes all of the file system switch code to be removed.
Its value should be the name of the file system supported by the
boot block, e.g. "ufs" for the FFS file system. calls to the
file system functions open, close, etc., which were previously
done through a function switch are then done via direct invocation
of <fs>_open, <fs>_close, etc. (e.g. ufs_open, ...).
add support for the preprocessor macro LIBSA_SINGLE_DEVICE, which
does the equivalent of LIBSA_SINGLE_FILESYSTEM but for the device
switch table. Device entry pointes are expected to be named
<dev>foo, e.g. the 'strategy' routine used when LIBSA_SINGLE_DEVICE
is set to 'disk' is diskstrategy.
make ufs.c f_nindir array be unsigned ints. the fact that it was signed
caused ufs.c to require signed division routines (which were otherwise
unnecessary for a small boot block).
1999-03-31 05:50:25 +04:00
|
|
|
#endif
|
1994-05-08 20:11:14 +04:00
|
|
|
#define F_NODEV 0x0008 /* network open - no device */
|
1994-01-26 05:03:32 +03:00
|
|
|
|
|
|
|
|
#define isupper(c) ((c) >= 'A' && (c) <= 'Z')
|
|
|
|
|
#define tolower(c) ((c) - 'A' + 'a')
|
1999-11-14 00:06:46 +03:00
|
|
|
#define isspace(c) ((c) == ' ' || (c) == '\t')
|
1994-01-26 05:03:32 +03:00
|
|
|
#define isdigit(c) ((c) >= '0' && (c) <= '9')
|
|
|
|
|
|
1995-09-15 03:45:21 +04:00
|
|
|
int devopen __P((struct open_file *, const char *, char **));
|
1997-06-26 23:17:40 +04:00
|
|
|
#ifdef HEAP_VARIABLE
|
|
|
|
|
void setheap __P((void *, void *));
|
|
|
|
|
#endif
|
1995-09-15 03:45:21 +04:00
|
|
|
void *alloc __P((unsigned int));
|
|
|
|
|
void free __P((void *, unsigned int));
|
1994-01-26 05:03:32 +03:00
|
|
|
struct disklabel;
|
1995-09-15 03:45:21 +04:00
|
|
|
char *getdisklabel __P((const char *, struct disklabel *));
|
1996-01-14 01:25:32 +03:00
|
|
|
int dkcksum __P((struct disklabel *));
|
1994-05-08 20:11:14 +04:00
|
|
|
|
1996-10-13 06:28:58 +04:00
|
|
|
void printf __P((const char *, ...));
|
1999-02-11 17:32:00 +03:00
|
|
|
int sprintf __P((char *, const char *, ...));
|
|
|
|
|
int snprintf __P((char *, size_t, const char *, ...));
|
1996-11-30 07:35:51 +03:00
|
|
|
void vprintf __P((const char *, _BSD_VA_LIST_));
|
1999-02-11 17:32:00 +03:00
|
|
|
int vsprintf __P((char *, const char *, _BSD_VA_LIST_));
|
|
|
|
|
int vsnprintf __P((char *, size_t, const char *, _BSD_VA_LIST_));
|
1995-09-17 04:49:37 +04:00
|
|
|
void twiddle __P((void));
|
1994-08-23 01:55:58 +04:00
|
|
|
void gets __P((char *));
|
1999-02-11 12:10:43 +03:00
|
|
|
int getfile __P((char *prompt, int mode));
|
1997-06-13 18:30:44 +04:00
|
|
|
char *strerror __P((int));
|
1995-09-19 01:19:18 +04:00
|
|
|
__dead void panic __P((const char *, ...)) __attribute__((noreturn));
|
1996-01-14 01:25:32 +03:00
|
|
|
__dead void _rtt __P((void)) __attribute__((noreturn));
|
1995-09-19 01:19:18 +04:00
|
|
|
void bcopy __P((const void *, void *, size_t));
|
1996-01-14 01:25:32 +03:00
|
|
|
void *memcpy __P((void *, const void *, size_t));
|
1997-01-16 07:06:15 +03:00
|
|
|
int memcmp __P((const void *, const void *, size_t));
|
1995-02-21 10:16:24 +03:00
|
|
|
void exec __P((char *, char *, int));
|
1995-09-15 03:45:21 +04:00
|
|
|
int open __P((const char *, int));
|
1994-08-23 01:55:58 +04:00
|
|
|
int close __P((int));
|
1996-01-14 01:25:32 +03:00
|
|
|
void closeall __P((void));
|
1995-09-15 03:45:21 +04:00
|
|
|
ssize_t read __P((int, void *, size_t));
|
1998-07-27 19:10:05 +04:00
|
|
|
ssize_t write __P((int, void *, size_t));
|
1997-01-22 03:37:23 +03:00
|
|
|
off_t lseek __P((int, off_t, int));
|
1999-02-11 12:10:43 +03:00
|
|
|
int ioctl __P((int, u_long, char *));
|
2000-02-03 05:00:31 +03:00
|
|
|
int stat __P((const char *, struct stat *));
|
|
|
|
|
int fstat __P((int, struct stat *));
|
1999-11-11 21:11:25 +03:00
|
|
|
|
1999-04-14 19:23:27 +04:00
|
|
|
extern int opterr, optind, optopt, optreset;
|
|
|
|
|
extern char *optarg;
|
|
|
|
|
int getopt __P((int, char * const *, const char *));
|
1999-09-09 19:52:37 +04:00
|
|
|
|
|
|
|
|
char *getpass __P((const char *));
|
|
|
|
|
int checkpasswd __P((void));
|
|
|
|
|
|
1995-09-15 03:45:21 +04:00
|
|
|
int nodev __P((void));
|
|
|
|
|
int noioctl __P((struct open_file *, u_long, void *));
|
|
|
|
|
void nullsys __P((void));
|
1994-05-08 20:11:14 +04:00
|
|
|
|
|
|
|
|
int null_open __P((char *path, struct open_file *f));
|
|
|
|
|
int null_close __P((struct open_file *f));
|
1995-09-15 03:45:21 +04:00
|
|
|
ssize_t null_read __P((struct open_file *f, void *buf,
|
|
|
|
|
size_t size, size_t *resid));
|
|
|
|
|
ssize_t null_write __P((struct open_file *f, void *buf,
|
|
|
|
|
size_t size, size_t *resid));
|
1994-05-08 20:11:14 +04:00
|
|
|
off_t null_seek __P((struct open_file *f, off_t offset, int where));
|
|
|
|
|
int null_stat __P((struct open_file *f, struct stat *sb));
|
|
|
|
|
|
1994-08-23 01:55:58 +04:00
|
|
|
/* Machine dependent functions */
|
1994-05-08 20:11:14 +04:00
|
|
|
void machdep_start __P((char *, int, char *, char *, char *));
|
1994-08-23 01:55:58 +04:00
|
|
|
int getchar __P((void));
|
|
|
|
|
void putchar __P((int));
|
1997-01-22 03:37:23 +03:00
|
|
|
|
|
|
|
|
#ifdef __INTERNAL_LIBSA_CREAD
|
|
|
|
|
int oopen __P((const char *, int));
|
|
|
|
|
int oclose __P((int));
|
|
|
|
|
ssize_t oread __P((int, void *, size_t));
|
|
|
|
|
off_t olseek __P((int, off_t, int));
|
|
|
|
|
#endif
|