NetBSD/distrib/common/Makefile.distrib

#	$NetBSD: Makefile.distrib,v 1.9 2012/02/17 00:33:25 riz Exp $
#
# Makefile snippet to setup various make variables variables used in distrib/:
#
# Variables defined:
#	DISTRIBDIR	Top level of distrib
#	DISTRIBREV	NetBSD version without dots, as in "59924"
#	DISTRIBVER	NetBSD version with dots, as in "5.99.24"
#	DISTRIBVERDEP	Files to depend on for version/revision vars above
#
# Commands defined:
#	MAKESUMS	runs sets/makesums with the appropriate environment
#	RELEASE_INSTALL	installs release binaries
#
#

.if !defined(_MAKEFILE_DISTRIB_)
_MAKEFILE_DISTRIB_=1

.include <bsd.sys.mk>		# for HOST_SH

DISTRIBDIR=	${NETBSDSRCDIR}/distrib
DISTRIBREV!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -s
DISTRIBVER!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh
MODULEVER!=	${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -k
DISTRIBVERDEP=	${NETBSDSRCDIR}/sys/sys/param.h \
		${NETBSDSRCDIR}/sys/conf/osrelease.sh

MAKESUMS=	MAKE=${MAKE:Q} CKSUM=${TOOL_CKSUM:Q} ${HOST_SH} ${DISTRIBDIR}/sets/makesums
RELEASE_INSTALL=${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -m ${NONBINMODE}


.endif	# _MAKEFILE_DISTRIB_
Use a new variable, MODULEVER, for kernel modules, tracking what's been done elsewhere. 2012-02-17 04:33:24 +04:00			`# $NetBSD: Makefile.distrib,v 1.9 2012/02/17 00:33:25 riz Exp $`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`#`
			`# Makefile snippet to setup various make variables variables used in distrib/:`
add multiple-include protection. clean up some comments. 2003-03-11 10:18:38 +03:00			`#`
			`# Variables defined:`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`# DISTRIBDIR Top level of distrib`
Update version number examples for the post-2.0I world. 2010-02-07 21:50:49 +03:00			`# DISTRIBREV NetBSD version without dots, as in "59924"`
			`# DISTRIBVER NetBSD version with dots, as in "5.99.24"`
Add a list of files which determine the kernel version as DISTRIBVERDEP in Makefile.distrib, and make both sysinst and distribution notes use that information so that they rebuild if the kernel version changes. Distribution notes didn't have this before, sysinst had a private (now outdated, since sys/sys/param.h now determines version) copy of this. 2004-02-02 21:43:39 +03:00			`# DISTRIBVERDEP Files to depend on for version/revision vars above`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`#`
add multiple-include protection. clean up some comments. 2003-03-11 10:18:38 +03:00			`# Commands defined:`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`# MAKESUMS runs sets/makesums with the appropriate environment`
			`# RELEASE_INSTALL installs release binaries`
			`#`
			`#`

add multiple-include protection. clean up some comments. 2003-03-11 10:18:38 +03:00			`.if !defined(_MAKEFILE_DISTRIB_)`
			`_MAKEFILE_DISTRIB_=1`

pull in <bsd.sys.mk> for HOST_SH 2003-05-09 13:06:14 +04:00			`.include <bsd.sys.mk> # for HOST_SH`
add multiple-include protection. clean up some comments. 2003-03-11 10:18:38 +03:00
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`DISTRIBDIR= ${NETBSDSRCDIR}/distrib`
use ${HOST_SH} 2003-05-08 17:04:13 +04:00			`DISTRIBREV!= ${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -s`
			`DISTRIBVER!= ${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh`
Use a new variable, MODULEVER, for kernel modules, tracking what's been done elsewhere. 2012-02-17 04:33:24 +04:00			`MODULEVER!= ${HOST_SH} ${NETBSDSRCDIR}/sys/conf/osrelease.sh -k`
Add a list of files which determine the kernel version as DISTRIBVERDEP in Makefile.distrib, and make both sysinst and distribution notes use that information so that they rebuild if the kernel version changes. Distribution notes didn't have this before, sysinst had a private (now outdated, since sys/sys/param.h now determines version) copy of this. 2004-02-02 21:43:39 +03:00			`DISTRIBVERDEP= ${NETBSDSRCDIR}/sys/sys/param.h \`
			`${NETBSDSRCDIR}/sys/conf/osrelease.sh`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00
PR/33837: Bucky Katz: crossbuild of release fails because $MAKE not passed 2006-06-27 16:34:54 +04:00			`MAKESUMS= MAKE=${MAKE:Q} CKSUM=${TOOL_CKSUM:Q} ${HOST_SH} ${DISTRIBDIR}/sets/makesums`
yet another distrib overhaul: - move guts of distrib/Makefile.inc to distrib/common/Makefile.distrib (fixes problem caused by implicit include of ../Makefile.inc in certain submake conditions triggered by makefiles not yet in tree) - removed mkdir of ${RELEASEDIR}/*; rely upon "snap_pre" target of etc/Makefile to create all the release directories - renamed RELINSTALL to RELEASE_INSTALL - renamed FLOPPYINSTDIR to FLOPPY_RELEASEDIR - renamed MDSETDIR to MDSET_RELEASEDIR - removed ITARGET - move release target from top level to appropriate subdirectory - ensure release target has correct depends - replace miniroot's IMAGE_MD_POST with common/Makefile.image IMAGEPOSTBUILD - Makefile.image: add realall: ${IMAGE} 2002-05-02 22:02:14 +04:00			`RELEASE_INSTALL=${INSTALL} ${RENAME} ${PRESERVE} ${COPY} -m ${NONBINMODE}`
add multiple-include protection. clean up some comments. 2003-03-11 10:18:38 +03:00

			`.endif # _MAKEFILE_DISTRIB_`