NetBSD/lib/libc/gen/sysctl.3

1244 lines
42 KiB
Groff
Raw Normal View History

.\" $NetBSD: sysctl.3,v 1.53 2000/03/29 14:30:27 jdolecek Exp $
.\"
1994-05-07 06:52:59 +04:00
.\" Copyright (c) 1993
.\" The Regents of the University of California. All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by the University of
.\" California, Berkeley and its contributors.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
1998-02-02 05:41:17 +03:00
.\" @(#)sysctl.3 8.4 (Berkeley) 5/9/95
1994-05-07 06:52:59 +04:00
.\"
.Dd June 24, 1999
1994-05-07 06:52:59 +04:00
.Dt SYSCTL 3
.Os
.Sh NAME
.Nm sysctl
.Nd get or set system information
1998-02-05 21:45:17 +03:00
.Sh LIBRARY
.Lb libc
1994-05-07 06:52:59 +04:00
.Sh SYNOPSIS
.Fd #include <sys/param.h>
1994-05-07 06:52:59 +04:00
.Fd #include <sys/sysctl.h>
.Ft int
.Fn sysctl "int *name" "u_int namelen" "void *oldp" "size_t *oldlenp" "void *newp" "size_t newlen"
.Sh DESCRIPTION
The
.Nm
1994-05-07 06:52:59 +04:00
function retrieves system information and allows processes with
appropriate privileges to set system information.
The information available from
.Nm
1994-05-07 06:52:59 +04:00
consists of integers, strings, and tables.
Information may be retrieved and set from the command interface
using the
.Xr sysctl 8
1994-05-07 06:52:59 +04:00
utility.
.Pp
Unless explicitly noted below,
.Nm
1994-05-07 06:52:59 +04:00
returns a consistent snapshot of the data requested.
Consistency is obtained by locking the destination
buffer into memory so that the data may be copied out without blocking.
Calls to
.Nm
1994-05-07 06:52:59 +04:00
are serialized to avoid deadlock.
.Pp
The state is described using a ``Management Information Base'' (MIB)
style name, listed in
.Fa name ,
which is a
.Fa namelen
length array of integers.
.Pp
The information is copied into the buffer specified by
.Fa oldp .
The size of the buffer is given by the location specified by
.Fa oldlenp
before the call,
and that location gives the amount of data copied after a successful call.
If the amount of data available is greater
than the size of the buffer supplied,
the call supplies as much data as fits in the buffer provided
and returns with the error code ENOMEM.
If the old value is not desired,
.Fa oldp
and
.Fa oldlenp
should be set to NULL.
.Pp
The size of the available data can be determined by calling
.Nm
1994-05-07 06:52:59 +04:00
with a NULL parameter for
.Fa oldp .
The size of the available data will be returned in the location pointed to by
.Fa oldlenp .
For some operations, the amount of space may change often.
For these operations,
the system attempts to round up so that the returned size is
large enough for a call to return the data shortly thereafter.
.Pp
To set a new value,
.Fa newp
is set to point to a buffer of length
.Fa newlen
from which the requested value is to be taken.
If a new value is not to be set,
.Fa newp
should be set to NULL and
.Fa newlen
set to 0.
.Pp
The top level names are defined with a CTL_ prefix in
.Pa <sys/sysctl.h> ,
and are as follows.
The next and subsequent levels down are found in the include files
listed here, and described in separate sections below.
.Pp
.Bl -column CTLXMACHDEPXXX "Next level namesXXXXXX" -offset indent
.It Sy Pa Name Next level names Description
.It CTL\_DEBUG sys/sysctl.h Debugging
1998-02-02 05:41:17 +03:00
.It CTL\_VFS sys/mount.h Filesystem
1994-05-07 06:52:59 +04:00
.It CTL\_HW sys/sysctl.h Generic CPU, I/O
.It CTL\_KERN sys/sysctl.h High kernel limits
.It CTL\_MACHDEP sys/sysctl.h Machine dependent
.It CTL\_NET sys/socket.h Networking
.It CTL\_PROC sys/sysctl.h Per-process
1994-05-07 06:52:59 +04:00
.It CTL\_USER sys/sysctl.h User-level
.It CTL\_VM vm/vm_param.h Virtual memory
.El
.Pp
For example, the following retrieves the maximum number of processes allowed
in the system:
.Bd -literal -offset indent -compact
int mib[2], maxproc;
size_t len;
.sp
mib[0] = CTL_KERN;
mib[1] = KERN_MAXPROC;
len = sizeof(maxproc);
sysctl(mib, 2, &maxproc, &len, NULL, 0);
.Ed
.sp
To retrieve the standard search path for the system utilities:
.Bd -literal -offset indent -compact
int mib[2];
size_t len;
char *p;
.sp
mib[0] = CTL_USER;
mib[1] = USER_CS_PATH;
sysctl(mib, 2, NULL, &len, NULL, 0);
p = malloc(len);
sysctl(mib, 2, p, &len, NULL, 0);
.Ed
.Sh CTL_DEBUG
The debugging variables vary from system to system.
A debugging variable may be added or deleted without need to recompile
.Nm
1994-05-07 06:52:59 +04:00
to know about it.
Each time it runs,
.Nm
1994-05-07 06:52:59 +04:00
gets the list of debugging variables from the kernel and
displays their current values.
The system defines twenty
1994-05-07 06:52:59 +04:00
.Ns ( Va struct ctldebug )
variables named
.Dv debug0
1994-05-07 06:52:59 +04:00
through
.Dv debug19 .
1994-05-07 06:52:59 +04:00
They are declared as separate variables so that they can be
individually initialized at the location of their associated variable.
The loader prevents multiple use of the same variable by issuing errors
if a variable is initialized in more than one place.
For example, to export the variable
.Dv dospecialcheck
1994-05-07 06:52:59 +04:00
as a debugging variable, the following declaration would be used:
.Bd -literal -offset indent -compact
int dospecialcheck = 1;
struct ctldebug debug5 = { "dospecialcheck", &dospecialcheck };
.Ed
1998-02-02 05:41:17 +03:00
.Sh CTL_VFS
A distinguished second level name, VFS_GENERIC,
is used to get general information about all filesystems.
One of its third level identifiers is VFS_MAXTYPENUM
that gives the highest valid filesystem type number.
Its other third level identifier is VFS_CONF that
returns configuration information about the filesystem
type given as a fourth level identifier.
1998-02-02 05:41:17 +03:00
The remaining second level identifiers are the
filesystem type number returned by a
.Xr statfs 2
call or from VFS_CONF.
The third level identifiers available for each filesystem
are given in the header file that defines the mount
argument structure for that filesystem.
1994-05-07 06:52:59 +04:00
.Sh CTL_HW
The string and integer information available for the CTL_HW level
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "Second level nameXXXXXX" integerXXX -offset indent
.It Sy Pa Second level name Type Changeable
.It HW\_MACHINE string no
.It HW\_MODEL string no
.It HW\_NCPU integer no
.It HW\_BYTEORDER integer no
.It HW\_PHYSMEM integer no
.It HW\_USERMEM integer no
.It HW\_PAGESIZE integer no
.\".It HW\_DISKNAMES struct no
.\".It HW\_DISKSTATS struct no
.It HW\_MACHINE\_ARCH string no
.It HW\_ALIGNBYTES integer no
1994-05-07 06:52:59 +04:00
.El
.Pp
.Bl -tag -width "123456"
.It Li HW_MACHINE
The machine class.
.It Li HW_MODEL
The machine model
.It Li HW_NCPU
The number of cpus.
1998-02-02 05:41:17 +03:00
.ne 1i
1994-05-07 06:52:59 +04:00
.It Li HW_BYTEORDER
The byteorder (4,321, or 1,234).
.It Li HW_PHYSMEM
The bytes of physical memory.
.It Li HW_USERMEM
The bytes of non-kernel memory.
.It Li HW_PAGESIZE
The software page size.
.\".It Fa HW_DISKNAMES
.\".It Fa HW_DISKSTATS
.It Li HW_MACHINE_ARCH
The machine cpu class.
.It Li HW_ALIGNBYTES
Alignment constraint for all possible data types.
This shows the value
.Dv ALIGNBYTES
in
.Pa /usr/include/machine/param.h ,
at the kernel compilation time.
1994-05-07 06:52:59 +04:00
.El
.Sh CTL_KERN
The string and integer information available for the CTL_KERN level
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
The types of data currently available are process information,
system vnodes, the open file entries, routing table entries,
virtual memory statistics, load average history, and clock rate
information.
.Bl -column "KERNXCHOWNXRESTRICTEDXXX" "struct clockrateXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It KERN\_ARGMAX integer no
.It KERN\_AUTONICETIME integer yes
.It KERN\_AUTONICEVAL integer yes
1994-05-07 06:52:59 +04:00
.It KERN\_BOOTTIME struct timeval no
.It KERN\_CHOWN\_RESTRICTED integer no
.It KERN\_CLOCKRATE struct clockinfo no
.It KERN\_DEFCORENAME string yes
.It KERN\_DOMAINNAME string yes
1994-05-07 06:52:59 +04:00
.It KERN\_FILE struct file no
.It KERN\_FSYNC integer no
1994-05-07 06:52:59 +04:00
.It KERN\_HOSTID integer yes
.It KERN\_HOSTNAME string yes
.It KERN\_IOV\_MAX integer no
1994-05-07 06:52:59 +04:00
.It KERN\_JOB\_CONTROL integer no
.It KERN\_LINK\_MAX integer no
1999-09-27 20:24:39 +04:00
.It KERN\_LOGIN\_NAME\_MAX integer no
.It KERN\_LOGSIGEXIT integer yes
1999-09-27 20:24:39 +04:00
.It KERN\_MAPPED\_FILES integer no
1994-05-07 06:52:59 +04:00
.It KERN\_MAXFILES integer yes
.It KERN\_MAXPARTITIONS integer no
1994-05-07 06:52:59 +04:00
.It KERN\_MAXPROC integer yes
.It KERN\_MAXVNODES integer yes
.It KERN\_MAX\_CANON integer no
.It KERN\_MAX\_INPUT integer no
.It KERN\_MEMLOCK integer no
.It KERN\_MEMLOCK\_RANGE integer no
.It KERN\_MEMORY\_PROTECTION integer no
1997-09-19 23:17:17 +04:00
.It KERN\_MSGBUFSIZE integer no
1994-05-07 06:52:59 +04:00
.It KERN\_NAME\_MAX integer no
.It KERN\_NGROUPS integer no
.It KERN\_NO\_TRUNC integer no
.It KERN\_OSRELEASE string no
.It KERN\_OSREV integer no
.It KERN\_OSTYPE string no
.It KERN\_PATH\_MAX integer no
.It KERN\_PIPE\_BUF integer no
.It KERN\_POSIX1 integer no
.It KERN\_PROC struct proc no
.It KERN\_PROF node not applicable
.It KERN\_RAWPARTITION integer no
1994-05-07 06:52:59 +04:00
.It KERN\_SAVED\_IDS integer no
.It KERN\_SECURELVL integer raise only
.It KERN\_SYNCHRONIZED\_IO integer no
.It KERN\_SYSVMSG integer no
.It KERN\_SYSVSEM integer no
.It KERN\_SYSVSHM integer no
1994-05-07 06:52:59 +04:00
.It KERN\_VDISABLE integer no
.It KERN\_VERSION string no
.It KERN\_VNODE struct vnode no
.El
1998-02-02 05:41:17 +03:00
.ne 1i
1994-05-07 06:52:59 +04:00
.Pp
.Bl -tag -width "123456"
.It Li KERN_ARGMAX
The maximum bytes of argument to
.Xr execve 2 .
.It Li KERN_AUTONICETIME
The number of seconds of cpu-time a non-root process may accumulate before
having its priority lowered from the default to the value of KERN_AUTONICEVAL.
If set to 0, automatic lowering of priority is not performed, and if set to -1
all non-root processes are immediately lowered.
.It Li KERN_AUTONICEVAL
The priority assigned for automatically niced processes.
1994-05-07 06:52:59 +04:00
.It Li KERN_BOOTTIME
A
.Va struct timeval
structure is returned.
This structure contains the time that the system was booted.
.It Li KERN_CHOWN_RESTRICTED
Return 1 if appropriate privileges are required for the
.Xr chown 2
system call, otherwise 0.
.It Li KERN_CLOCKRATE
A
.Va struct clockinfo
structure is returned.
This structure contains the clock, statistics clock and profiling clock
frequencies, the number of micro-seconds per hz tick, and the clock
skew rate.
.It Li KERN_DEFCORENAME
Default template for the name of core dump files (see also PROC_PID_CORENAME
in the per-process variables CTL_PROC, and
.Xr core 5
for format of this template). The default value is
.Nm %n.core
and can be changed with the kernel configuration option
.Cd options DEFCORENAME
(see
.Xr options 4
).
.It Li KERN_DOMAINNAME
Get or set the YP domain name.
1994-05-07 06:52:59 +04:00
.It Li KERN_FILE
Return the entire file table.
The returned data consists of a single
.Va struct filehead
followed by an array of
.Va struct file ,
whose size depends on the current number of such objects in the system.
.It Li KERN_FSYNC
Return 1 if the POSIX 1003.1b File Synchronization Option is available
on this system,
otherwise 0.
1994-05-07 06:52:59 +04:00
.It Li KERN_HOSTID
Get or set the host id.
.It Li KERN_HOSTNAME
Get or set the hostname.
.It Li KERN_IOV_MAX
Return the maximum number of
.Va iovec
structures that a process has available for use with
.Xr preadv 2 ,
.Xr pwritev 2 ,
.Xr readv 2 ,
.Xr recvmsg 2 ,
.Xr sendmsg 2
and
.Xr writev 2 .
1994-05-07 06:52:59 +04:00
.It Li KERN_JOB_CONTROL
Return 1 if job control is available on this system, otherwise 0.
.It Li KERN_LINK_MAX
The maximum file link count.
1999-09-27 20:24:39 +04:00
.It Li KERN_LOGIN_NAME_MAX
The size of the storage required for a login name, in bytes,
including the terminating NUL.
.It Li KERN_LOGSIGEXIT
If this flag is non-zero, the kernel will
.Xr log 9
all process exits due to signals which create a
.Xr core 5
file, and whether the coredump was created.
.It Li KERN_MAPPED_FILES
Returns 1 if the POSIX 1003.1b Memory Mapped Files Option is available
on this system,
otherwise 0.
1994-05-07 06:52:59 +04:00
.It Li KERN_MAXFILES
The maximum number of open files that may be open in the system.
.It Li KERN_MAXPARTITIONS
The maximum number of partitions allowed per disk.
1994-05-07 06:52:59 +04:00
.It Li KERN_MAXPROC
The maximum number of simultaneous processes the system will allow.
.It Li KERN_MAXVNODES
The maximum number of vnodes available on the system.
.It Li KERN_MAX_CANON
The maximum number of bytes in terminal canonical input line.
.It Li KERN_MAX_INPUT
The minimum maximum number of bytes for which space is available in
a terminal input queue.
.It Li KERN_MEMLOCK
Returns 1 if the POSIX 1003.1b Process Memory Locking Option is available
on this system,
otherwise 0.
.It Li KERN_MEMLOCK_RANGE
Returns 1 if the POSIX 1003.1b Range Memory Locking Option is available
on this system,
otherwise 0.
.It Li KERN_MEMORY_PROTECTION
Returns 1 if the POSIX 1003.1b Memory Protection Option is available
on this system,
otherwise 0.
1997-09-19 23:17:17 +04:00
.It Li KERN_MSGBUFSIZE
The maximum number of characters that the kernel message buffer can hold.
1994-05-07 06:52:59 +04:00
.It Li KERN_NAME_MAX
The maximum number of bytes in a file name.
.It Li KERN_NGROUPS
The maximum number of supplemental groups.
.It Li KERN_NO_TRUNC
Return 1 if file names longer than KERN_NAME_MAX are truncated.
.It Li KERN_OSRELEASE
The system release string.
.It Li KERN_OSREV
The system revision string.
.It Li KERN_OSTYPE
The system type string.
.It Li KERN_PATH_MAX
The maximum number of bytes in a pathname.
.It Li KERN_PIPE_BUF
The maximum number of bytes which will be written atomically to a pipe.
.It Li KERN_POSIX1
The version of ISO/IEC 9945 (POSIX 1003.1) with which the system
attempts to comply.
.It Li KERN_PROC
Return the entire process table, or a subset of it.
An array of
.Va struct kinfo_proc
structures is returned,
whose size depends on the current number of such objects in the system.
The third and fourth level names are as follows:
.Bl -column "Third level nameXXXXXX" "Fourth level is:XXXXXX" -offset indent
.It Pa Third level name Fourth level is:
.It KERN\_PROC\_ALL None
.It KERN\_PROC\_PID A process ID
.It KERN\_PROC\_PGRP A process group
.It KERN\_PROC\_TTY A tty device
.It KERN\_PROC\_UID A user ID
.It KERN\_PROC\_RUID A real user ID
.El
.It Li KERN_PROF
Return profiling information about the kernel.
If the kernel is not compiled for profiling,
attempts to retrieve any of the KERN_PROF values will
fail with EOPNOTSUPP.
The third level names for the string and integer profiling information
1994-05-07 06:52:59 +04:00
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "GPROFXGMONPARAMXXX" "struct gmonparamXXX" -offset indent
.It Sy Pa Third level name Type Changeable
.It GPROF\_STATE integer yes
.It GPROF\_COUNT u_short[\|] yes
.It GPROF\_FROMS u_short[\|] yes
.It GPROF\_TOS struct tostruct yes
.It GPROF\_GMONPARAM struct gmonparam no
.El
.Pp
The variables are as follows:
.Bl -tag -width "123456"
.It Li GPROF_STATE
Returns GMON_PROF_ON or GMON_PROF_OFF to show that profiling
is running or stopped.
.It Li GPROF_COUNT
Array of statistical program counter counts.
.It Li GPROF_FROMS
Array indexed by program counter of call-from points.
.It Li GPROF_TOS
Array of
.Va struct tostruct
describing destination of calls and their counts.
.It Li GPROF_GMONPARAM
Structure giving the sizes of the above arrays.
.El
.It Li KERN_RAWPARTITION
The raw partition of a disk (a == 0).
1994-05-07 06:52:59 +04:00
.It Li KERN_SAVED_IDS
Returns 1 if saved set-group and saved set-user ID is available.
.It Li KERN_SECURELVL
The system security level.
This level may be raised by processes with appropriate privilege.
It may only be lowered by process 1.
.It Li KERN_SYNCHRONIZED_IO
Returns 1 if the POSIX 1003.1b Synchronized I/O Option is available
on this system,
otherwise 0.
.It Li KERN_SYSVMSG
Returns 1 if System V style message queue functionality is available
on this system,
otherwise 0.
.It Li KERN_SYSVSEM
Returns 1 if System V style semaphore functionality is available
on this system,
otherwise 0.
.It Li KERN_SYSVSHM
Returns 1 if System V style share memory functionality is available
on this system,
otherwise 0.
1994-05-07 06:52:59 +04:00
.It Li KERN_VDISABLE
Returns the terminal character disabling value.
.It Li KERN_VERSION
The system version string.
.It Li KERN_VNODE
Return the entire vnode table.
Note, the vnode table is not necessarily a consistent snapshot of
the system.
The returned data consists of an array whose size depends on the
current number of such objects in the system.
Each element of the array contains the kernel address of a vnode
.Va struct vnode *
followed by the vnode itself
.Va struct vnode .
.El
.Sh CTL_MACHDEP
The set of variables defined is architecture dependent.
Most architectures define at least the following variables.
.Bl -column "CONSOLE_DEVICEXXX" "integerXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It Li CPU_CONSDEV dev_t no
.El
.Sh CTL_NET
The string and integer information available for the CTL_NET level
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "Second level nameXXXXXX" "routing messagesXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It PF\_ROUTE routing messages no
2000-01-01 21:00:56 +03:00
.It PF\_INET IPv4 values yes
.It PF\_INET6 IPv6 values yes
1994-05-07 06:52:59 +04:00
.El
.Pp
.Bl -tag -width "123456"
.It Li PF_ROUTE
Return the entire routing table or a subset of it.
The data is returned as a sequence of routing messages (see
.Xr route 4
for the header file, format and meaning).
The length of each message is contained in the message header.
.Pp
The third level name is a protocol number, which is currently always 0.
The fourth level name is an address family, which may be set to 0 to
select all address families.
The fifth and sixth level names are as follows:
.Bl -column "Fifth level nameXXXXXX" "Sixth level is:XXX" -offset indent
.It Pa Fifth level name Sixth level is:
.It NET\_RT\_FLAGS rtflags
.It NET\_RT\_DUMP None
.It NET\_RT\_IFLIST None
.El
.It Li PF_INET
2000-01-01 21:00:56 +03:00
Get or set various global information about the IPv4
.Pq Internet Protocol version 4 .
1994-05-07 06:52:59 +04:00
The third level name is the protocol.
The fourth level name is the variable name.
The currently defined protocols and names are:
.Bl -column "Protocol name" "Variable nameXX" "integer" "yes" -offset indent
1994-05-07 06:52:59 +04:00
.It Pa Protocol name Variable name Type Changeable
.It ip forwarding integer yes
.It ip redirect integer yes
.It ip ttl integer yes
.It ip forwsrcrt integer yes
.It ip directed-broadcast integer yes
.It ip allowsrcrt integer yes
.It ip subnetsarelocal integer yes
.It ip mtudisc integer yes
1998-01-05 12:59:03 +03:00
.It ip anonportmin integer yes
.It ip anonportmax integer yes
.It ip mtudisctimeout integer yes
2000-01-01 21:00:56 +03:00
.It ip gifttl integer yes
.It icmp errratelimit integer yes
1994-05-07 06:52:59 +04:00
.It icmp maskrepl integer yes
.It tcp rfc1323 integer yes
1997-07-29 02:24:01 +04:00
.It tcp sendspace integer yes
.It tcp recvspace integer yes
.It tcp mssdflt integer yes
1997-07-29 02:24:01 +04:00
.It tcp syn_cache_limit integer yes
.It tcp syn_bucket_limit integer yes
.It tcp syn_cache_interval integer yes
1997-12-12 02:30:47 +03:00
.It tcp init_win integer yes
.It tcp mss_ifmtu integer yes
.It tcp sack integer yes
.It tcp win_scale integer yes
.It tcp timestamps integer yes
.It tcp compat_42 integer yes
.It tcp cwm integer yes
.It tcp cwm_burstsize integer yes
.It tcp ack_on_push integer yes
.It tcp keepidle integer yes
.It tcp keepintvl integer yes
.It tcp keepcnt integer yes
.It tcp slowhz integer no
.It tcp newreno integer yes
.It tcp log_refused integer yes
.It tcp rstratelimit integer yes
1994-05-07 06:52:59 +04:00
.It udp checksum integer yes
1997-07-29 02:24:01 +04:00
.It udp sendspace integer yes
.It udp recvspace integer yes
1994-05-07 06:52:59 +04:00
.El
.Pp
The variables are as follows:
.Bl -tag -width "123456"
.It Li ip.forwarding
Returns 1 when IP forwarding is enabled for the host,
meaning that the host is acting as a router.
.It Li ip.redirect
Returns 1 when ICMP redirects may be sent by the host.
This option is ignored unless the host is routing IP packets,
and should normally be enabled on all systems.
.It Li ip.ttl
The maximum time-to-live (hop count) value for an IP packet sourced by
the system.
This value applies to normal transport protocols, not to ICMP.
.It Li ip.forwsrcrt
Returns 1 when forwarding of source-routed packets is enabled for
the host. This value may only be changed if the kernel security
level is less than 1.
.It Li ip.directed-broadcast
Returns 1 if directed broadcast behavior is enabled for the host.
.It Li ip.allowsrcrt
Returns 1 if the host accepts source routed packets.
.It Li ip.subnetsarelocal
Returns 1 if subnets are to be considered local addresses.
.It Li ip.mtudisc
Returns 1 if Path MTU Discovery is enabled.
1998-01-05 12:59:03 +03:00
.It Li ip.anonportmin
The lowest port number to use for TCP and UDP ephemeral port allocation.
This cannot be set to less that 1024 or greater than 65535.
.It Li ip.anonportmax
The highest port number to use for TCP and UDP ephemeral port allocation.
This cannot be set to less that 1024 or greater than 65535, and must
be greater than
.Li ip.anonportmin .
.It Li ip.mtudisctimeout
Returns the number of seconds in which a route added by the Path MTU
Discovery engine will time out. When the route times out, the Path
MTU Discovery engine will attempt to probe a larger path MTU.
2000-01-01 21:00:56 +03:00
.It Li ip.gifttl
The maximum time-to-live (hop count) value for an IPv4 packet generated by
.Xr gif 4
tunnel interface.
.It Li icmp.errratelimit
This variable specifies the minimum interval between ICMP error messages,
in microseconds.
1994-05-07 06:52:59 +04:00
.It Li icmp.maskrepl
Returns 1 if ICMP network mask requests are to be answered.
1995-09-30 10:03:54 +03:00
.It Li tcp.rfc1323
Returns 1 if RFC1323 extensions to TCP are enabled.
1997-07-29 02:24:01 +04:00
.It Li tcp.sendspace
Returns the default TCP send buffer size.
.It Li tcp.recvspace
Returns the default TCP receive buffer size.
.It Li tcp.mssdflt
Returns the default maximum segment size both advertsized to the peer
and to use when the peer does not advertize a maximum segment size to
us during connection setup. Do not change this value unless you really
know what you are doing.
1997-07-29 02:24:01 +04:00
.It Li tcp.syn_cache_limit
Returns the maximum number of entries allowed in the TCP compressed state
engine.
.It Li tcp.syn_bucket_limit
Returns the maximum number of entries allowed per hash bucket in the TCP
compressed state engine.
.It Li tcp.syn_cache_interval
Returns the TCP compressed state engine's timer interval.
1997-12-12 02:30:47 +03:00
.It Li tcp.init_win
Returns a value indicating the TCP initial congestion window. If this
value is 0, an auto-tuning algorithm designed to use an initial window
of approximately 4K bytes is in use. Otherwise, this value indicates
a fixed number of packets.
.It Li tcp.mss_ifmtu
Returns 1 if TCP calculates the outgoing maximum segment size based on
the MTU of the appropriate interface. Otherwise, it is calculated based on
the greater of the MTU of the interface, and the largest (non-loopback)
interface MTU on the system.
.It Li tcp.sack
Returns a value which determines the level of Selective Acknowledgement
supported by TCP. If 2, we will transmit and receive SACK options.
If 1, we will transmit SACK options, but ignore any SACK options received.
If 0, SACK is disabled.
.It Li tcp.win_scale
If rfc1323 is enabled, a value of 1 indicates RFC1323 window scale options,
for increasing the TCP window size, are enabled.
.It Li tcp.timestamps
If rfc1323 is enabled, a value of 1 indicates RFC1323 time stamp options,
used for measuring TCP round trip times, are enabled.
.It Li tcp.compat_42
Returns 1 if work-arounds for bugs in the 4.2BSD TCP implementation are
enabled. Use of this option is not recommended, although it may be
required in order to communicate with extremely old TCP implementations.
.It Li tcp.cwm
Returns 1 if use of the Hughes/Touch/Heidemann Congestion Window Monitoring
algorithm is enabled. This algorithm prevents line-rate bursts of packets
that could otherwise occur when data begins flowing on an idle TCP
connection. These line-rate bursts can contribute to network and router
congestion. This can be particularly useful on World Wide Web servers
which support HTTP/1.1, which has lingering connections.
.It Li tcp.cwm_burstsize
Returns the Congestion Window Monitoring allowed burst size, in terms
of packet count.
.It Li tcp.ack_on_push
Returns 1 if TCP is to immediately transmit an ACK upon reception of
a packet with PUSH set. This can avoid losing a round trip time in some
rare situations, but has the caveat of potentially defeating TCP's delayed
ACK algorithm. Use of this option is generally not recommended, but
the variable exists in case your configuration really needs it.
.It Li tcp.keepidle
Time a connection must be idle before keepalives are sent (if keepalives
are enabled for the connection). See also tcp.slowhz.
.It Li tcp.keepintvl
Time after a keepalive probe is sent until, in the absence of any response,
another probe is sent. See also tcp.slowhz.
.It Li tcp.keepcnt
Number of keepalive probes sent before declaring a connection dead. If
set to zero, there is no limit; keepalives will be sent until some kind of
response is received from the peer.
.It Li tcp.slowhz
The units for tcp.keepidle and tcp.keepintvl; those variables are in ticks
of a clock that ticks tcp.slowhz times per second. (That is, their values
must be divided by the tcp.slowhz value to get times in seconds.)
.It Li tcp.newreno
Returns 1 if the use of J. Hoe's NewReno congestion control algorithm is
enabled. This algorithm improves the start-up behavior of TCP connections.
.It Li tcp.log_refused
Returns 1 if refused TCP connections to the host will be logged.
.It Li tcp.rstratelimit
This variable specifies minimum interval, in microseconds, between RSTs
sent in response to an incoming TCP packet with no corresponding listen
or connected socket.
1994-05-07 06:52:59 +04:00
.It Li udp.checksum
Returns 1 when UDP checksums are being computed and checked.
Disabling UDP checksums is strongly discouraged.
1997-07-29 02:24:01 +04:00
.It Li udp.sendspace
Returns the default UDP send buffer size.
.It Li udp.recvspace
Returns the default UDP receive buffer size.
1994-05-07 06:52:59 +04:00
.El
.Pp
For variables net.*.ipsec, please refer to
.Xr ipsec 4 .
2000-01-01 21:00:56 +03:00
.It Li PF_INET6
Get or set various global information about the IPv6
.Pq Internet Protocol version 6 .
The third level name is the protocol.
The fourth level name is the variable name.
The currently defined protocols and names are:
.Bl -column "Protocol name" "Variable nameXX" "integer" "yes" -offset indent
.It Pa Protocol name Variable name Type Changeable
.It ip6 forwarding integer yes
.It ip6 redirect integer yes
.It ip6 hlim integer yes
.It ip6 maxfragpackets integer yes
.It ip6 accept_rtadv integer yes
.It ip6 keepfaith integer yes
.It ip6 log_interval integer yes
.It ip6 hdrnestlimit integer yes
.It ip6 dad_count integer yes
.It ip6 auto_flowlabel integer yes
.It ip6 defmcasthlim integer yes
.It ip6 gif_hlim integer yes
.It ip6 kame_version string no
.It ip6 use_deprecated integer yes
.It ip6 rr_prune integer yes
.It ip6 bindv6only integer yes
2000-01-01 21:00:56 +03:00
.It icmp6 rediraccept integer yes
.It icmp6 redirtimeout integer yes
.It icmp6 errratelimit integer yes
.It icmp6 nd6_prune integer yes
.It icmp6 nd6_delay integer yes
.It icmp6 nd6_umaxtries integer yes
.It icmp6 nd6_mmaxtries integer yes
.It icmp6 nd6_useloopback integer yes
.It icmp6 nodeinfo integer yes
2000-01-01 21:00:56 +03:00
.It tcp6 mssdflt integer yes
.It tcp6 do_rfc1323 integer yes
.It tcp6 keepidle integer yes
.It tcp6 keepinterval integer yes
.It tcp6 keepcount integer yes
.It tcp6 maxpersistidle integer yes
.It tcp6 sendspace integer yes
.It tcp6 recvspace integer yes
.It tcp6 conntimeo integer yes
.It tcp6 pmtu integer yes
.It tcp6 pmtu_expire integer yes
.It tcp6 pmtu_probe integer yes
.It tcp6 43maxseg integer yes
.It tcp6 syn_cache_limit integer yes
.It tcp6 syn_bucket_limit integer yes
.It tcp6 syn_cache_interval integer yes
.It udp6 sendmax integer yes
.It udp6 recvspace integer yes
.El
.Pp
The variables are as follows:
.Bl -tag -width "123456"
.It Li ip6.forwarding
Returns 1 when IPv6 forwarding is enabled for the node,
meaning that the node is acting as a router.
Returns 0 when IPv6 forwarding is disabled for the node,
meaning that the node is acting as a host.
IPv6 specification defines node behavior for
.Dq router
case and
.Dq host
case quite differently, and changing this variable during operation
may cause serious trouble.
It is recommended to configure the variable at bootstrap time,
and bootstrap time only.
2000-01-01 21:00:56 +03:00
.It Li ip6.redirect
Returns 1 when ICMPv6 redirects may be sent by the node.
This option is ignored unless the node is routing IP packets,
and should normally be enabled on all systems.
.It Li ip6.hlim
The default hop limit value for an IPv6 unicast packet sourced by the node.
This value applies to all the transport protocols on top of IPv6.
There are APIs to override the value, as documented in
.Xr ip6 4 .
.It Li ip6.maxfragpackets
The maximum number of fragmented packets the node will accept.
0 means that the node will not accept any fragmented packets.
-1 means that the node will accept as many fragmented packets as it receives.
The flag is provided basically for avoiding possible DoS attacks.
.It Li ip6.accept_rtadv
If set to non-zero, the node will accept ICMPv6 router advertisement packets
and autoconfigures address prefixes and default routers.
The node must be a host
.Pq not a router
for the option to be meaningful.
.It Li ip6.keepfaith
If set to non-zero, it enables
.Dq FAITH
TCP relay IPv6-to-IPv4 translator code in the kernel.
Refer
.Xr faith 4
and
.Xr faithd 8
for detail.
.It Li ip6.log_interval
The variable controls amount of logs generated by IPv6 packet
forwarding engine, by seting interval between log output
.Pq in seconds .
.It Li ip6.hdrnestlimit
The number of IPv6 extension headers permitted on incoming IPv6 packets.
If set to 0, the node will accept as many extension headers as possible.
.It Li ip6.dad_count
The variable cofigures number of IPv6 DAD
.Pq duplicated address detection
probe packets.
The packets will be generated when IPv6 interface addresses are configured.
.It Li ip6.auto_flowlabel
On connected transport protocol packets,
fill IPv6 flowlabel field to help intermediate routers to identify packet flows.
.It Li ip6.defmcasthlim
The default hop limit value for an IPv6 multicast packet sourced by the node.
This value applies to all the transport protocols on top of IPv6.
There are APIs to override the value, as documented in
.Xr ip6 4 .
.It Li ip6.gif_hlim
The maximum hop limit value for an IPv6 packet generated by
.Xr gif 4
tunnel interface.
.It Li ip6.kame_version
The string identifies the version of KAME IPv6 stack implemented in the kernel.
.It Li ip6.use_deprecated
The variable controls use of deprecated address, specified in RFC2462 5.5.4.
.It Li ip6.rr_prune
The variable specifies interval between IPv6 router renumbering prefix
babysitting, in seconds.
.It Li ip6.bindv6only
The variable specifies initial value for
.Dv IPV6_BINDV6ONLY
socket option for
.Dv AF_INET6
socket.
Please refer to
.Xr ip6 4
for detail.
2000-01-01 21:00:56 +03:00
.It Li icmp6.rediraccept
If set to non-zero, the host will accept ICMPv6 redirect packets.
Note that IPv6 routers will never accept ICMPv6 redirect packets,
and the variable is meaningful on IPv6 hosts
.Pq non-router
only.
.It Li icmp6.redirtimeout
The variable specifies lifetime of routing entries generated by incoming
ICMPv6 redirect.
.It Li icmp6.errratelimit
The variable specifies minimum interval between ICMPv6 error messages,
2000-01-01 21:00:56 +03:00
in microseconds.
.It Li icmp6.nd6_prune
The variable specifies interval between IPv6 neighbor cache babysitting,
in seconds.
.It Li icmp6.nd6_delay
The variable specifies
.Dv DELAY_FIRST_PROBE_TIME
timing constant in IPv6 neighbor discovery specification
.Pq RFC2461 ,
in seconds.
.It Li icmp6.nd6_umaxtries
The variable specifies
.Dv MAX_UNICAST_SOLICIT
constant in IPv6 neighbor discovery specification
.Pq RFC2461 .
.It Li icmp6.nd6_mmaxtries
The variable specifies
.Dv MAX_MULTICAST_SOLICIT
constant in IPv6 neighbor discovery specification
.Pq RFC2461 .
.It Li icmp6.nd6_useloopback
If set to non-zero, kernel IPv6 stack will use loopback interface for
local traffic.
.It Li icmp6.nodeinfo
The variable enables, or disables, kernel support for
ICMPv6 node information query/reply.
2000-01-01 21:00:56 +03:00
.El
.Pp
Variables net.*.tcp6 and net.*.udp6 are identical to
net.*.tcp and net.*.udp.
Please refer to
.Li PF_INET
section above.
For variables net.*.ipsec6, please refer to
.Xr ipsec 4 .
1999-03-09 22:45:09 +03:00
.El
.Sh CTL_PROC
The string and integer information available for the CTL_PROC
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
These values are per-process, and as such may change from one process
to another. When a process is created, the default values are inherited from
its parent. When a set-user-ID or set-group-ID binary is executed, the
value of PROC_PID_CORENAME is reset to the system default value.
The second level name is either the magic value PROC_CURPROC, which
points to the current process, or the PID of the target process.
.Bl -column "USER_COLL_WEIGHTS_MAXXXX" "integerXXX" "yes" -offset indent
.It Sy Pa Third level name Type Changeable
.It PROC\_PID\_CORENAME string yes
.It PROC\_PID\_LIMIT node not applicable
.El
.Bl -tag -width "123456"
.Pp
.It Li PROC_PID_CORENAME
The template used for the core dump file name (see
.Xr core 5
for details). The base name must either be
.Nm core
or end with the suffix ``.core'' (the super-user may set arbitrary names). By
default it points to KERN_DEFCORENAME.
.It Li PROC_PID_LIMIT
Return resources limits, as defined for the
.Xr getrlimit 2
and
.Xr setrlimit 2
system calls.
The fourth level name is one of:
.Bl -tag -width PROC_PID_LIMIT_MEMLOCKAA
.It Li PROC_PID_LIMIT_CPU
The maximum amount of cpu time (in seconds) to be used by each process.
.It Li PROC_PID_LIMIT_FSIZE
The largest size (in bytes) file that may be created.
.It Li PROC_PID_LIMIT_DATA
The maximum size (in bytes) of the data segment for a process;
this defines how far a program may extend its break with the
.Xr sbrk 2
system call.
.It Li PROC_PID_LIMIT_STACK
The maximum size (in bytes) of the stack segment for a process;
this defines how far a program's stack segment may be extended.
Stack extension is performed automatically by the system.
.It Li PROC_PID_LIMIT_CORE
The largest size (in bytes)
.Pa core
file that may be created.
.It Li PROC_PID_LIMIT_RSS
The maximum size (in bytes) to which a process's resident set size may
grow.
This imposes a limit on the amount of physical memory to be given to
a process; if memory is tight, the system will prefer to take memory
from processes that are exceeding their declared resident set size.
.It Li PROC_PID_LIMIT_MEMLOCK
The maximum size (in bytes) which a process may lock into memory
using the
.Xr mlock 2
function.
.It Li PROC_PID_LIMIT_NPROC
The maximum number of simultaneous processes for this user id.
.It Li PROC_PID_LIMIT_NOFILE
The maximum number of open files for this process.
.El
.Pp
The fifth level name is one of PROC_PID_LIMIT_TYPE_SOFT or
PROC_PID_LIMIT_TYPE_HARD, to select respectively the soft or hard limit.
Both are of type integer.
.El
.Pp
1994-05-07 06:52:59 +04:00
.Sh CTL_USER
The string and integer information available for the CTL_USER level
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "USER_COLL_WEIGHTS_MAXXXX" "integerXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It USER\_BC\_BASE\_MAX integer no
.It USER\_BC\_DIM\_MAX integer no
.It USER\_BC\_SCALE\_MAX integer no
.It USER\_BC\_STRING\_MAX integer no
.It USER\_COLL\_WEIGHTS\_MAX integer no
.It USER\_CS\_PATH string no
.It USER\_EXPR\_NEST\_MAX integer no
.It USER\_LINE\_MAX integer no
.It USER\_POSIX2\_CHAR\_TERM integer no
.It USER\_POSIX2\_C\_BIND integer no
.It USER\_POSIX2\_C\_DEV integer no
.It USER\_POSIX2\_FORT\_DEV integer no
.It USER\_POSIX2\_FORT\_RUN integer no
.It USER\_POSIX2\_LOCALEDEF integer no
.It USER\_POSIX2\_SW\_DEV integer no
.It USER\_POSIX2\_UPE integer no
.It USER\_POSIX2\_VERSION integer no
.It USER\_RE\_DUP\_MAX integer no
.It USER\_STREAM\_MAX integer no
.It USER\_TZNAME\_MAX integer no
.El
.Bl -tag -width "123456"
.Pp
.It Li USER_BC_BASE_MAX
The maximum ibase/obase values in the
.Xr bc 1
utility.
.It Li USER_BC_DIM_MAX
The maximum array size in the
.Xr bc 1
utility.
.It Li USER_BC_SCALE_MAX
The maximum scale value in the
.Xr bc 1
utility.
.It Li USER_BC_STRING_MAX
The maximum string length in the
.Xr bc 1
utility.
.It Li USER_COLL_WEIGHTS_MAX
The maximum number of weights that can be assigned to any entry of
the LC_COLLATE order keyword in the locale definition file.
.It Li USER_CS_PATH
Return a value for the
.Ev PATH
environment variable that finds all the standard utilities.
.It Li USER_EXPR_NEST_MAX
The maximum number of expressions that can be nested within
parenthesis by the
.Xr expr 1
utility.
.It Li USER_LINE_MAX
The maximum length in bytes of a text-processing utility's input
line.
.It Li USER_POSIX2_CHAR_TERM
Return 1 if the system supports at least one terminal type capable of
all operations described in POSIX 1003.2, otherwise 0.
.It Li USER_POSIX2_C_BIND
Return 1 if the system's C-language development facilities support the
C-Language Bindings Option, otherwise 0.
.It Li USER_POSIX2_C_DEV
Return 1 if the system supports the C-Language Development Utilities Option,
otherwise 0.
.It Li USER_POSIX2_FORT_DEV
Return 1 if the system supports the FORTRAN Development Utilities Option,
otherwise 0.
.It Li USER_POSIX2_FORT_RUN
Return 1 if the system supports the FORTRAN Runtime Utilities Option,
otherwise 0.
.It Li USER_POSIX2_LOCALEDEF
Return 1 if the system supports the creation of locales, otherwise 0.
.It Li USER_POSIX2_SW_DEV
Return 1 if the system supports the Software Development Utilities Option,
otherwise 0.
.It Li USER_POSIX2_UPE
Return 1 if the system supports the User Portability Utilities Option,
otherwise 0.
.It Li USER_POSIX2_VERSION
The version of POSIX 1003.2 with which the system attempts to comply.
.It Li USER_RE_DUP_MAX
The maximum number of repeated occurrences of a regular expression
permitted when using interval notation.
1998-02-02 05:41:17 +03:00
.ne 1i
1994-05-07 06:52:59 +04:00
.It Li USER_STREAM_MAX
The minimum maximum number of streams that a process may have open
at any one time.
.It Li USER_TZNAME_MAX
The minimum maximum number of types supported for the name of a
timezone.
.El
.Sh CTL_VM
The string and integer information available for the CTL_VM level
is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "Second level nameXXXXXX" "struct loadavgXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It VM\_LOADAVG struct loadavg no
.It VM\_METER struct vmtotal no
.El
.Pp
.Bl -tag -width "123456"
.It Li VM_LOADAVG
Return the load average history.
The returned data consists of a
.Va struct loadavg .
.It Li VM_METER
Return the system wide virtual memory statistics.
The returned data consists of a
.Va struct vmtotal .
.El
1997-01-09 08:39:26 +03:00
.Sh CTL_DDB
The integer information available for the CTL_DDB level is detailed below.
The changeable column shows whether a process with appropriate
privilege may change the value.
.Bl -column "DBCTL_TABSTOPSXXX" "integerXXX" -offset indent
.It Sy Pa Second level name Type Changeable
.It DBCTL\_RADIX integer yes
.It DBCTL\_MAXOFF integer yes
.It DBCTL\_LINES integer yes
.It DBCTL\_TABSTOPS integer yes
.It DBCTL\_ONPANIC integer yes
.It DBCTL\_FROMCONSOLE integer yes
1997-01-09 08:39:26 +03:00
.El
.Pp
.Bl -tag -width "123456"
.It Li DBCTL_RADIX
The input and output radix.
.It Li DBCTL_MAXOFF
The maximum symbol offset.
.It Li DBCTL_LINES
Number of display lines.
.It Li DBCTL_TABSTOPS
Tab width.
.It Li DBCTL_ONPANIC
If non-zero, DDB will be entered when the kernel panics.
.It Li DBCTL_FROMCONSOLE
If not zero, DDB may be entered by sending a break on a serial
console or by a special key sequence on a graphics console.
1997-01-09 08:39:26 +03:00
.El
.Pp
These MIB nodes are also available as variables from within the
DDB. See
.Xr ddb 4
for more details.
1994-05-07 06:52:59 +04:00
.Sh RETURN VALUES
If the call to
.Nm
1998-02-02 05:41:17 +03:00
is successful, the number of bytes copied out is returned.
1994-05-07 06:52:59 +04:00
Otherwise \-1 is returned and
.Va errno
is set appropriately.
.Sh ERRORS
The following errors may be reported:
.Bl -tag -width Er
.It Bq Er EFAULT
The buffer
.Fa name ,
.Fa oldp ,
.Fa newp ,
or length pointer
.Fa oldlenp
contains an invalid address.
.It Bq Er EINVAL
The
.Fa name
array is less than two or greater than CTL_MAXNAME.
.It Bq Er EINVAL
A non-null
.Fa newp
is given and its specified length in
.Fa newlen
is too large or too small.
.It Bq Er ENOMEM
The length pointed to by
.Fa oldlenp
is too short to hold the requested value.
.It Bq Er ENOTDIR
The
.Fa name
array specifies an intermediate rather than terminal name.
.It Bq Er EOPNOTSUPP
The
.Fa name
array specifies a value that is unknown.
.It Bq Er EPERM
An attempt is made to set a read-only value.
.It Bq Er EPERM
A process without appropriate privilege attempts to set a value.
.It Bq Er EPERM
An attempt to change a value protected by the current kernel security
level is made.
1994-05-07 06:52:59 +04:00
.El
.Sh FILES
.Bl -tag -width <netinet/icmpXvar.h> -compact
.It Pa <sys/sysctl.h>
definitions for top level identifiers, second level kernel and hardware
identifiers, and user level identifiers
.It Pa <sys/socket.h>
definitions for second level network identifiers
.It Pa <sys/gmon.h>
definitions for third level profiling identifiers
.It Pa <vm/vm_param.h>
definitions for second level virtual memory identifiers
.It Pa <netinet/in.h>
2000-01-01 21:00:56 +03:00
definitions for third level IPv4/v6 identifiers and
fourth level IPv4/v6 identifiers
1994-05-07 06:52:59 +04:00
.It Pa <netinet/icmp_var.h>
definitions for fourth level ICMP identifiers
2000-01-01 21:00:56 +03:00
.It Pa <netinet/icmp6.h>
definitions for fourth level ICMPv6 identifiers
1995-09-30 10:03:54 +03:00
.It Pa <netinet/tcp_var.h>
definitions for fourth level TCP identifiers
1994-05-07 06:52:59 +04:00
.It Pa <netinet/udp_var.h>
definitions for fourth level UDP identifiers
.El
.Sh SEE ALSO
.Xr sysctl 8 ,
.Xr ipsec 4
1994-05-07 06:52:59 +04:00
.Sh HISTORY
The
.Nm
1998-02-04 00:42:54 +03:00
function first appeared in
.Bx 4.4 .