Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/sys/Makefile

22 lines
541 B
Makefile
Raw Normal View History

merge the bouyer-socketcan branch to HEAD. CAN stands for Controller Area Network, a broadcast network used in automation and automotive fields. For example, the NMEA2000 standard developped for marine devices uses a CAN network as the link layer. This is an implementation of the linux socketcan API: https://www.kernel.org/doc/Documentation/networking/can.txt you can also see can(4). This adds a new socket family (AF_CAN) and protocol (PF_CAN), as well as the canconfig(8) utility, used to set timing parameter of CAN hardware. Also inclued is a driver for the CAN controller found in the allwinner A20 SoC (I tested it with an Olimex lime2 board, connected with PIC18-based CAN devices). There is also the canloop(4) pseudo-device, which allows to use the socketcan API without CAN hardware. At this time the CANFD part of the linux socketcan API is not implemented. Error frames are not implemented either. But I could get the cansend and canreceive utilities from the canutils package to build and run with minimal changes. tcpudmp(8) can also be used to record frames, which can be decoded with etherreal.
2017-05-28 00:02:54 +03:00
# $NetBSD: Makefile,v 1.80 2017/05/27 21:02:55 bouyer Exp $
Implement build_install in src/lib/Makefile, which traverses the subdirectories and invokes dependall/install. Do this in groups delimited by .WAIT to ensure that depending libraries can use the installed versions and don't need to know the locations in the source tree. Use this new target in src/Makefile to replace most of the adhoc library logic with two special cases, src/lib and src/compat. Adjust sys/Makefile to include the module directory when building them. Add some necessary .WAITs in src/lib/Makefile to reflect the dependencies from src/Makefile and also add the rump libraries here.
2012-08-17 20:22:27 +04:00
.include <bsd.own.mk>
install sys headers from sys/Makefile.
1996-09-30 03:29:16 +04:00
don't descend to crypto.
2006-10-29 22:08:53 +03:00
SUBDIR= altq arch compat dev fs miscfs \
merge the bouyer-socketcan branch to HEAD. CAN stands for Controller Area Network, a broadcast network used in automation and automotive fields. For example, the NMEA2000 standard developped for marine devices uses a CAN network as the link layer. This is an implementation of the linux socketcan API: https://www.kernel.org/doc/Documentation/networking/can.txt you can also see can(4). This adds a new socket family (AF_CAN) and protocol (PF_CAN), as well as the canconfig(8) utility, used to set timing parameter of CAN hardware. Also inclued is a driver for the CAN controller found in the allwinner A20 SoC (I tested it with an Olimex lime2 board, connected with PIC18-based CAN devices). There is also the canloop(4) pseudo-device, which allows to use the socketcan API without CAN hardware. At this time the CANFD part of the linux socketcan API is not implemented. Error frames are not implemented either. But I could get the cansend and canreceive utilities from the canutils package to build and run with minimal changes. tcpudmp(8) can also be used to record frames, which can be decoded with etherreal.
2017-05-28 00:02:54 +03:00
net net80211 netatalk netbt netcan netipsec netinet netinet6 \
Retire OSI network stack. OK core@
2013-03-01 22:25:13 +04:00
netisdn netkey netmpls netnatm netsmb \
Install rump libraries and utilities to the base system and remove the private non-installed build infrastructure from sys/rump. breakdown of commit: * install relevant headers into /usr/include/rump * build sys/rump/librump/rumpuser and sys/rump/librump/rumpkern from src/lib and install as librumpuser and librump, respectively + this retains the ability to test a librump build with just the kernel sources at hand * move sys/rump/fs/lib/libukfs and sys/rump/fs/lib/libp2k to src/lib for general consumption, they are not kernel-space dwellers anyway * build and install sys/rump/fs/lib/lib$fs as librumpfs_$fs * add chapter 3 manual pages for rump, rumpuser, ukfs and p2k * build and install userspace kernel file system daemons if MKPUFFS=yes is spexified * retire fsconsole for now, it will make a comeback with an actually implemented version shortly
2008-07-29 17:17:40 +04:00
nfs opencrypto sys ufs uvm
do the right thing, so things aren't built in /usr/src/sys
1993-07-04 18:02:53 +04:00
add a comment stating why evbppc doesn't do lkm or modules
2008-07-28 18:09:55 +04:00
# interrupt implementation depends on the kernel within the port
build evbppc modules in 3 different flavours: - oea (default) - ibm4xx - booke this, together with earlier machine_module[] work, should allow evbppc platforms to use modules.
2011-06-15 13:45:58 +04:00
#.if (${MACHINE} != "evbppc")
Implement build_install in src/lib/Makefile, which traverses the subdirectories and invokes dependall/install. Do this in groups delimited by .WAIT to ensure that depending libraries can use the installed versions and don't need to know the locations in the source tree. Use this new target in src/Makefile to replace most of the adhoc library logic with two special cases, src/lib and src/compat. Adjust sys/Makefile to include the module directory when building them. Add some necessary .WAITs in src/lib/Makefile to reflect the dependencies from src/Makefile and also add the rump libraries here.
2012-08-17 20:22:27 +04:00
.if make(obj) || make(cleandir) || ${MKKMOD} != "no"
Remove LKMs and switch to the module framework, pass 1. Proposed on tech-kern@.
2008-11-12 15:35:50 +03:00
SUBDIR+=modules
Do not try to build LKMs on evbppc, because we cannot predetermine the PPC_INTR_IMPL, which is used to include a file in <machine/intr.h>. To allow evbppc to complete a ``make release'', we also need to factor out the LKM files to a new set list file, and tweak makeflist to not include this file for evbppc. Discussed with Matt Thomas.
2003-03-16 01:32:07 +03:00
.endif
build evbppc modules in 3 different flavours: - oea (default) - ibm4xx - booke this, together with earlier machine_module[] work, should allow evbppc platforms to use modules.
2011-06-15 13:45:58 +04:00
#.endif
Skip the "includes" phase of src/sys/lkm.
2001-09-22 00:53:36 +04:00
Descend into include/rump and install headers.
2008-11-17 11:54:39 +03:00
.if make(includes) || make(obj) || make(cleandir)
be sure to decend into sys/rump during "make obj". fixes builds on r/o src.
2008-07-31 05:11:53 +04:00
SUBDIR+= rump
.endif
Rework the way kernel include files are installed. In the new method, as with user-land programs, include files are installed by each directory in the tree that has includes to install. (This allows more flexibility as to what gets installed, makes 'partial installs' easier, and gives us more options as to which machines' includes get installed at any given time.) The old SYS_INCLUDES={symlinks,copies} behaviours are _both_ still supported, though at least one bug in the 'symlinks' case is fixed by this change. Include files can't be build before installation, so directories that have includes as targets (e.g. dev/pci) have to move those targets into a different Makefile.
1998-06-13 03:22:30 +04:00
.include <bsd.kinc.mk>