NetBSD/sys/dev/pci/pciide_opti_reg.h

187 lines
6.5 KiB
C
Raw Normal View History

/* $NetBSD: pciide_opti_reg.h,v 1.3 2001/10/21 18:49:20 thorpej Exp $ */
/*-
* Copyright (c) 2000 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Steve C. Woodford.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Register definitions for OPTi PCIIDE controllers based on
* their 82c621 chip.
*/
/* IDE Initialization Control Register */
#define OPTI_REG_INIT_CONTROL 0x40
#define OPTI_INIT_CONTROL_MODE_PIO_0 0
#define OPTI_INIT_CONTROL_MODE_PIO_1 2
#define OPTI_INIT_CONTROL_MODE_PIO_2 1
#define OPTI_INIT_CONTROL_MODE_PIO_3 3
#define OPTI_INIT_CONTROL_ADDR_RELOC (1u << 2)
#define OPTI_INIT_CONTROL_CH2_ENABLE 0
#define OPTI_INIT_CONTROL_CH2_DISABLE (1u << 3)
#define OPTI_INIT_CONTROL_FIFO_16 0
#define OPTI_INIT_CONTROL_FIFO_32 (1u << 5)
#define OPTI_INIT_CONTROL_FIFO_REQ_32 0
#define OPTI_INIT_CONTROL_FIFO_REQ_30 (1u << 6)
#define OPTI_INIT_CONTROL_FIFO_REQ_28 (2u << 6)
#define OPTI_INIT_CONTROL_FIFO_REQ_26 (3u << 6)
/* IDE Enhanced Features Register */
#define OPTI_REG_ENH_FEAT 0x42
#define OPTI_ENH_FEAT_X111_ENABLE (1u << 1)
#define OPTI_ENH_FEAT_CONCURRENT_MAST (1u << 2)
#define OPTI_ENH_FEAT_PCI_INVALIDATE (1u << 3)
#define OPTI_ENH_FEAT_IDE_CONCUR (1u << 4)
#define OPTI_ENH_FEAT_SLAVE_FIFO_ISA (1u << 5)
/* IDE Enhanced Mode Register */
#define OPTI_REG_ENH_MODE 0x43
#define OPTI_ENH_MODE_MASK(c,d) (3u << (((c) * 4) + ((d) * 2)))
#define OPTI_ENH_MODE_USE_TIMING(c,d) 0
#define OPTI_ENH_MODE(c,d,m) ((m) << (((c) * 4) + ((d) * 2)))
/* Timing registers */
#define OPTI_REG_READ_CYCLE_TIMING 0x00
#define OPTI_REG_WRITE_CYCLE_TIMING 0x01
#define OPTI_RECOVERY_TIME_SHIFT 0
#define OPTI_PULSE_WIDTH_SHIFT 4
/*
* Control register.
*/
#define OPTI_REG_CONTROL 0x03
#define OPTI_CONTROL_DISABLE 0x11
#define OPTI_CONTROL_ENABLE 0x95
/* Strap register */
#define OPTI_REG_STRAP 0x05
#define OPTI_STRAP_PCI_SPEED_MASK 0x1u
#define OPTI_STRAP_PCI_33 0
#define OPTI_STRAP_PCI_25 1
/* Miscellaneous register */
#define OPTI_REG_MISC 0x06
#define OPTI_MISC_INDEX(d) ((unsigned)(d))
#define OPTI_MISC_INDEX_MASK 0x01u
#define OPTI_MISC_DELAY_MASK 0x07u
#define OPTI_MISC_DELAY_SHIFT 1
#define OPTI_MISC_ADDR_SETUP_MASK 0x3u
#define OPTI_MISC_ADDR_SETUP_SHIFT 4
#define OPTI_MISC_READ_PREFETCH_ENABLE (1u << 6)
#define OPTI_MISC_ADDR_SETUP_MASK 0x3u
#define OPTI_MISC_WRITE_MASK 0x7fu
/*
* Inline functions for accessing the timing registers of the
* OPTi controller.
*
* These *MUST* disable interrupts as they need atomic access to
* certain magic registers. Failure to adhere to this *will*
* break things in subtle ways if the wdc registers are accessed
* by an interrupt routine while this magic sequence is executing.
*/
static __inline__ u_int8_t __attribute__((__unused__))
opti_read_config(struct channel_softc *chp, int reg)
{
u_int8_t rv;
int s = splhigh();
/* Two consecutive 16-bit reads from register #1 (0x1f1/0x171) */
(void) bus_space_read_2(chp->cmd_iot, chp->cmd_ioh, wd_features);
(void) bus_space_read_2(chp->cmd_iot, chp->cmd_ioh, wd_features);
/* Followed by an 8-bit write of 0x3 to register #2 */
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_seccnt, 0x03u);
/* Now we can read the required register */
rv = bus_space_read_1(chp->cmd_iot, chp->cmd_ioh, reg);
/* Restore the real registers */
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_seccnt, 0x83u);
splx(s);
return rv;
}
static __inline__ void __attribute__((__unused__))
opti_write_config(struct channel_softc *chp, int reg, u_int8_t val)
{
int s = splhigh();
/* Two consecutive 16-bit reads from register #1 (0x1f1/0x171) */
(void) bus_space_read_2(chp->cmd_iot, chp->cmd_ioh, wd_features);
(void) bus_space_read_2(chp->cmd_iot, chp->cmd_ioh, wd_features);
/* Followed by an 8-bit write of 0x3 to register #2 */
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_seccnt, 0x03u);
/* Now we can write the required register */
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, reg, val);
/* Restore the real registers */
bus_space_write_1(chp->cmd_iot, chp->cmd_ioh, wd_seccnt, 0x83u);
splx(s);
}
/*
* These are the timing register values for the various IDE modes
* supported by the OPTi chip. The first index of the two-dimensional
* arrays is used for a 33MHz PCIbus, the second for a 25MHz PCIbus.
*/
static const u_int8_t opti_tim_cp[2][8] __attribute__((__unused__)) = {
/* Command Pulse */
{5, 4, 3, 2, 2, 7, 2, 2},
{4, 3, 2, 2, 1, 5, 2, 1}
};
static const u_int8_t opti_tim_rt[2][8] __attribute__((__unused__)) = {
/* Recovery Time */
{9, 4, 0, 0, 0, 6, 0, 0},
{6, 2, 0, 0, 0, 4, 0, 0}
};
static const u_int8_t opti_tim_as[2][8] __attribute__((__unused__)) = {
/* Address Setup */
{2, 1, 1, 1, 0, 0, 0, 0},
{1, 1, 0, 0, 0, 0, 0, 0}
};
static const u_int8_t opti_tim_em[8] __attribute__((__unused__)) = {
/* Enhanced Mode */
0, 0, 0, 1, 2, 0, 1 ,2
};