138 lines
6.1 KiB
C
138 lines
6.1 KiB
C
|
/* $NetBSD: nsphyterreg.h,v 1.1 1999/12/07 19:36:37 thorpej Exp $ */
|
||
|
|
|
||
|
|
/*-
|
||
|
|
* Copyright (c) 1999 The NetBSD Foundation, Inc.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
||
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
||
|
|
* NASA Ames Research Center.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
|
* documentation and/or other materials provided with the distribution.
|
||
|
|
* 3. All advertising materials mentioning features or use of this software
|
||
|
|
* must display the following acknowledgement:
|
||
|
|
* This product includes software developed by the NetBSD
|
||
|
|
* Foundation, Inc. and its contributors.
|
||
|
|
* 4. Neither the name of The NetBSD Foundation nor the names of its
|
||
|
|
* contributors may be used to endorse or promote products derived
|
||
|
|
* from this software without specific prior written permission.
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
||
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
||
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
||
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
||
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
||
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
||
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
||
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _DEV_MII_NSPHYTERREG_H_
|
||
|
|
#define _DEV_MII_NSPHYTERREG_H_
|
||
|
|
|
||
|
|
/*
|
||
|
|
* DP83843 registers.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_PHYSTS 0x10 /* PHY status */
|
||
|
|
#define PHYSTS_REL 0x8000 /* receive error latch */
|
||
|
|
#define PHYSTS_CIML 0x4000 /* CIM latch */
|
||
|
|
#define PHYSTS_FCSL 0x2000 /* false carrier sense latch */
|
||
|
|
#define PHYSTS_DEVRDY 0x0800 /* device ready */
|
||
|
|
#define PHYSTS_PGRX 0x0400 /* page received */
|
||
|
|
#define PHYSTS_ANEGEN 0x0200 /* autoneg. enabled */
|
||
|
|
#define PHYSTS_MIIINTR 0x0100 /* MII interrupt */
|
||
|
|
#define PHYSTS_REMFAULT 0x0080 /* remote fault */
|
||
|
|
#define PHYSTS_JABBER 0x0040 /* jabber detect */
|
||
|
|
#define PHYSTS_NWAYCOMP 0x0020 /* NWAY complete */
|
||
|
|
#define PHYSTS_RESETSTAT 0x0010 /* reset status */
|
||
|
|
#define PHYSTS_LOOPBACK 0x0008 /* loopback status */
|
||
|
|
#define PHYSTS_DUPLEX 0x0004 /* full duplex */
|
||
|
|
#define PHYSTS_SPEED10 0x0002 /* speed == 10Mb/s */
|
||
|
|
#define PHYSTS_LINK 0x0001 /* link up */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_MIPSCR 0x11 /* MII interrupt PHY specific
|
||
|
|
control */
|
||
|
|
|
||
|
|
#define MIPSCR_INTEN 0x0002 /* interrupt enable */
|
||
|
|
#define MIPSCR_TINT 0x0001 /* test interrupt */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_MIPGSR 0x12 /* MII interrupt PHY generic
|
||
|
|
status */
|
||
|
|
#define MIPGSR_MINT 0x8000 /* MII interrupt pending */
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_DCR 0x13 /* Disconnect counter */
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_FCSCR 0x14 /* False carrier sense counter */
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_RECR 0x15 /* Receive error counter */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_PCSR 0x16 /* PCS configuration and status */
|
||
|
|
#define PCSR_SINGLE_SD 0x8000 /* single-ended SD mode */
|
||
|
|
#define PCSR_FEFI_EN 0x4000 /* far end fault indication mode */
|
||
|
|
#define PCSR_DESCR_TO_RST 0x2000 /* reset descrambler timeout counter */
|
||
|
|
#define PCSR_DESCR_TO_SEL 0x1000 /* descrambler timer mode */
|
||
|
|
#define PCSR_DESCR_TO_DIS 0x0800 /* descrambler timer disable */
|
||
|
|
#define PCSR_LD_SCR_SD 0x0400 /* load scrambler seed */
|
||
|
|
#define PCSR_TX_QUIET 0x0200 /* 100Mb/s transmit true quiet mode */
|
||
|
|
#define PCSR_TX_PATTERN 0x0180 /* 100Mb/s transmit test pattern */
|
||
|
|
#define PCSR_F_LINK_100 0x0040 /* force good link in 100Mb/s */
|
||
|
|
#define PCSR_CIM_DIS 0x0020 /* carrier integrity monitor disable */
|
||
|
|
#define PCSR_CIM_STATUS 0x0010 /* carrier integrity monitor status */
|
||
|
|
#define PCSR_CODE_ERR 0x0008 /* code errors */
|
||
|
|
#define PCSR_PME_ERR 0x0004 /* premature end errors */
|
||
|
|
#define PCSR_LINK_ERR 0x0002 /* link errors */
|
||
|
|
#define PCSR_PKT_ERR 0x0001 /* packet errors */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_LBR 0x17 /* loopback and bypass */
|
||
|
|
#define LBR_BP_STRETCH 0x4000 /* bypass LED stretching */
|
||
|
|
#define LBR_BP_4B5B 0x2000 /* bypass encoding/decoding */
|
||
|
|
#define LBR_BP_SCR 0x1000 /* bypass scrambler/descrambler */
|
||
|
|
#define LBR_BP_RX 0x0800 /* bypass receive function */
|
||
|
|
#define LBR_BP_TX 0x0400 /* bypass transmit function */
|
||
|
|
#define LBR_100_DP_CTL 0x0380 /* 100Mb/s data patch control */
|
||
|
|
#define LBR_TW_LBEN 0x0020 /* TWISTER loopback enable */
|
||
|
|
#define LBR_10_ENDEC_LB 0x0010 /* 10Mb/s ENDEC loopback */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_10BTSCR 0x18 /* 10baseT status and control */
|
||
|
|
#define BTSCR_AUI_TPI 0x2000 /* TREX operating mode */
|
||
|
|
#define BTSCR_RX_SERIAL 0x1000 /* 10baseT RX serial mode */
|
||
|
|
#define BTSCR_TX_SERIAL 0x0800 /* 10baseT TX serial mode */
|
||
|
|
#define BTSCR_POL_DS 0x0400 /* polarity detection and correction
|
||
|
|
disable */
|
||
|
|
#define BTSCR_AUTOSW_EN 0x0200 /* AUI/TPI autoswitch */
|
||
|
|
#define BTSCR_LP_DS 0x0100 /* link pulse disable */
|
||
|
|
#define BTSCR_HB_DS 0x0080 /* heartbeat disabled */
|
||
|
|
#define BTSCR_LS_SEL 0x0040 /* low squelch select */
|
||
|
|
#define BTSCR_AUI_SEL 0x0020 /* AUI select */
|
||
|
|
#define BTSCR_JAB_DS 0x0010 /* jabber disable */
|
||
|
|
#define BTSCR_THIN_SEL 0x0008 /* thin ethernet select */
|
||
|
|
#define BTSCR_TX_FILT_DS 0x0004 /* TPI receive filter disable */
|
||
|
|
|
||
|
|
|
||
|
|
#define MII_NSPHYTER_PHYCTRL 0x19 /* PHY control */
|
||
|
|
#define PHYCTRL_TW_EQSEL 0x3000 /* TWISTER e.q. select */
|
||
|
|
#define PHYCTRL_BLW_DS 0x0800 /* TWISTER base line wander disable */
|
||
|
|
#define PHYCTRL_REPEATER 0x0200 /* repeater mode */
|
||
|
|
#define PHYCTRL_LED_TXRX_MODE 0x0180 /* LED TX/RX mode */
|
||
|
|
#define PHYCTRL_LED_DUP_MODE 0x0040 /* LED DUP mode */
|
||
|
|
#define PHYCTRL_FX_EN 0x0020 /* Fiber mode enable */
|
||
|
|
#define PHYCTRL_PHYADDR 0x001f /* PHY address */
|
||
|
|
|
||
|
|
#endif /* _DEV_MII_NSPHYTERREG_H_ */
|