NetBSD/usr.bin/mail/dotlock.c

190 lines
4.7 KiB
C
Raw Normal View History

2015-07-05 01:45:08 +03:00
/* $NetBSD: dotlock.c,v 1.13 2015/07/04 22:45:08 christos Exp $ */
/*
* Copyright (c) 1996 Christos Zoulas. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
#ifndef lint
2015-07-05 01:45:08 +03:00
__RCSID("$NetBSD: dotlock.c,v 1.13 2015/07/04 22:45:08 christos Exp $");
#endif
#include "rcv.h"
#include "extern.h"
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#include "sig.h"
#ifndef O_SYNC
#define O_SYNC 0
#endif
2002-03-02 17:59:35 +03:00
static int create_exclusive(const char *);
/*
* Create a unique file. O_EXCL does not really work over NFS so we follow
* the following trick: [Inspired by S.R. van den Berg]
*
* - make a mostly unique filename and try to create it.
* - link the unique filename to our target
* - get the link count of the target
* - unlink the mostly unique filename
* - if the link count was 2, then we are ok; else we've failed.
*/
static int
2002-03-02 17:59:35 +03:00
create_exclusive(const char *fname)
{
char path[MAXPATHLEN], hostname[MAXHOSTNAMELEN + 1];
const char *ptr;
struct timeval tv;
pid_t pid;
size_t ntries, cookie;
int fd, serrno;
struct stat st;
(void)gettimeofday(&tv, NULL);
(void)gethostname(hostname, sizeof(hostname));
hostname[sizeof(hostname) - 1] = '\0';
pid = getpid();
cookie = pid ^ tv.tv_usec;
/*
* We generate a semi-unique filename, from hostname.(pid ^ usec)
*/
if ((ptr = strrchr(fname, '/')) == NULL)
ptr = fname;
else
ptr++;
(void)snprintf(path, sizeof(path), "%.*s.%s.%lx",
1997-10-19 18:12:22 +04:00
(int)(ptr - fname), fname, hostname, (u_long)cookie);
/*
* We try to create the unique filename.
*/
for (ntries = 0; ; ntries++) {
fd = open(path, O_WRONLY|O_CREAT|O_TRUNC|O_EXCL|O_SYNC, 0);
if (fd != -1) {
2002-03-06 00:18:14 +03:00
(void)close(fd);
break;
}
2015-07-05 01:45:08 +03:00
else if (errno == EEXIST && ntries < 5)
continue;
else
return -1;
}
/*
* We link the path to the name
*/
if (link(path, fname) == -1)
goto bad;
/*
* Note that we stat our own exclusively created name, not the
* destination, since the destination can be affected by others.
*/
if (stat(path, &st) == -1)
goto bad;
2002-03-06 00:18:14 +03:00
(void)unlink(path);
/*
* If the number of links was two (one for the unique file and one
* for the lock), we've won the race
*/
if (st.st_nlink != 2) {
errno = EEXIST;
return -1;
}
return 0;
bad:
serrno = errno;
2002-03-06 00:18:14 +03:00
(void)unlink(path);
errno = serrno;
return -1;
}
2002-03-02 17:59:35 +03:00
/*
* fname -- Pathname to lock
* pollinterval -- Interval to check for lock, -1 return
* fp -- File to print message
* msg -- Message to print
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
dot_lock(const char *fname, int pollinterval, FILE *fp, const char *msg)
{
char path[MAXPATHLEN];
sigset_t nset, oset;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
int retval;
2005-07-20 03:07:10 +04:00
(void)sigemptyset(&nset);
(void)sigaddset(&nset, SIGHUP);
(void)sigaddset(&nset, SIGINT);
(void)sigaddset(&nset, SIGQUIT);
(void)sigaddset(&nset, SIGTERM);
(void)sigaddset(&nset, SIGTTIN);
(void)sigaddset(&nset, SIGTTOU);
(void)sigaddset(&nset, SIGTSTP);
(void)sigaddset(&nset, SIGCHLD);
2002-03-06 00:18:14 +03:00
(void)snprintf(path, sizeof(path), "%s.lock", fname);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
retval = -1;
for (;;) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
2002-03-06 00:18:14 +03:00
(void)sigprocmask(SIG_BLOCK, &nset, &oset);
if (create_exclusive(path) != -1) {
2002-03-06 00:18:14 +03:00
(void)sigprocmask(SIG_SETMASK, &oset, NULL);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
retval = 0;
break;
}
else
2002-03-06 00:18:14 +03:00
(void)sigprocmask(SIG_SETMASK, &oset, NULL);
if (errno != EEXIST)
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
break;
if (fp && msg)
2002-03-06 00:18:14 +03:00
(void)fputs(msg, fp);
if (pollinterval) {
if (pollinterval == -1) {
errno = EEXIST;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
break;
}
2005-07-20 03:07:10 +04:00
(void)sleep((unsigned int)pollinterval);
}
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
return retval;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
2002-03-02 17:59:35 +03:00
dot_unlock(const char *fname)
{
char path[MAXPATHLEN];
2002-03-06 00:18:14 +03:00
(void)snprintf(path, sizeof(path), "%s.lock", fname);
(void)unlink(path);
}