NetBSD/sys/dev/ic/ncr53c9xvar.h

400 lines
14 KiB
C
Raw Normal View History

/* $NetBSD: ncr53c9xvar.h,v 1.13 1998/05/26 23:17:34 thorpej Exp $ */
/*-
* Copyright (c) 1997 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1994 Peter Galbavy. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Peter Galbavy.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Set this to 1 for normal debug, or 2 for per-target tracing. */
#define NCR53C9X_DEBUG 1
#define NCR_ABORT_TIMEOUT 2000 /* time to wait for abort */
#define NCR_SENSE_TIMEOUT 1000 /* time to wait for sense */
#define FREQTOCCF(freq) (((freq + 4) / 5))
/*
* NCR 53c9x variants. Note, these values are used as indexes into
* a table; don't modify them unless you know what you're doing.
*/
#define NCR_VARIANT_ESP100 0
#define NCR_VARIANT_ESP100A 1
#define NCR_VARIANT_ESP200 2
#define NCR_VARIANT_NCR53C94 3
1997-02-27 16:59:32 +03:00
#define NCR_VARIANT_NCR53C96 4
#define NCR_VARIANT_ESP406 5
#define NCR_VARIANT_FAS408 6
#define NCR_VARIANT_FAS216 7
#define NCR_VARIANT_MAX 8
/*
* ECB. Holds additional information for each SCSI command Comments: We
* need a separate scsi command block because we may need to overwrite it
* with a request sense command. Basicly, we refrain from fiddling with
* the scsipi_xfer struct (except do the expected updating of return values).
* We'll generally update: xs->{flags,resid,error,sense,status} and
* occasionally xs->retries.
*/
struct ncr53c9x_ecb {
TAILQ_ENTRY(ncr53c9x_ecb) chain;
struct scsipi_xfer *xs; /* SCSI xfer ctrl block from above */
int flags;
1997-07-20 20:24:00 +04:00
#define ECB_ALLOC 0x01
#define ECB_NEXUS 0x02
#define ECB_SENSE 0x04
#define ECB_ABORT 0x40
#define ECB_RESET 0x80
#define ECB_TENTATIVE_DONE 0x100
int timeout;
struct {
u_char id; /* Selection Id msg */
struct scsi_generic cmd; /* SCSI command block */
} cmd;
int clen; /* Size of command in cmd.cmd */
char *daddr; /* Saved data pointer */
int dleft; /* Residue */
u_char stat; /* SCSI status byte */
u_char pad[3];
#if NCR53C9X_DEBUG > 1
char trace[1000];
#endif
};
#if NCR53C9X_DEBUG > 1
#define ECB_TRACE(ecb, msg, a, b) do { \
const char *f = "[" msg "]"; \
int n = strlen((ecb)->trace); \
if (n < (sizeof((ecb)->trace)-100)) \
sprintf((ecb)->trace + n, f, a, b); \
} while(0)
#else
#define ECB_TRACE(ecb, msg, a, b)
#endif
/*
* Some info about each (possible) target on the SCSI bus. This should
* probably have been a "per target+lunit" structure, but we'll leave it at
* this for now. Is there a way to reliably hook it up to sc->fordriver??
*/
struct ncr53c9x_tinfo {
int cmds; /* #commands processed */
int dconns; /* #disconnects */
int touts; /* #timeouts */
int perrs; /* #parity errors */
int senses; /* #request sense commands sent */
ushort lubusy; /* What local units/subr. are busy? */
u_char flags;
#define T_NEED_TO_RESET 0x01 /* Should send a BUS_DEV_RESET */
#define T_NEGOTIATE 0x02 /* (Re)Negotiate synchronous options */
#define T_BUSY 0x04 /* Target is busy, i.e. cmd in progress */
#define T_SYNCMODE 0x08 /* sync mode has been negotiated */
#define T_SYNCHOFF 0x10 /* .. */
#define T_RSELECTOFF 0x20 /* .. */
u_char period; /* Period suggestion */
u_char offset; /* Offset suggestion */
u_char pad[3];
} tinfo_t;
/* Register a linenumber (for debugging) */
#define LOGLINE(p)
#define NCR_SHOWECBS 0x01
#define NCR_SHOWINTS 0x02
#define NCR_SHOWCMDS 0x04
#define NCR_SHOWMISC 0x08
#define NCR_SHOWTRAC 0x10
#define NCR_SHOWSTART 0x20
#define NCR_SHOWPHASE 0x40
#define NCR_SHOWDMA 0x80
#define NCR_SHOWCCMDS 0x100
#define NCR_SHOWMSGS 0x200
#ifdef NCR53C9X_DEBUG
extern int ncr53c9x_debug;
#define NCR_ECBS(str) \
do {if (ncr53c9x_debug & NCR_SHOWECBS) printf str;} while (0)
#define NCR_MISC(str) \
do {if (ncr53c9x_debug & NCR_SHOWMISC) printf str;} while (0)
#define NCR_INTS(str) \
do {if (ncr53c9x_debug & NCR_SHOWINTS) printf str;} while (0)
#define NCR_TRACE(str) \
do {if (ncr53c9x_debug & NCR_SHOWTRAC) printf str;} while (0)
#define NCR_CMDS(str) \
do {if (ncr53c9x_debug & NCR_SHOWCMDS) printf str;} while (0)
#define NCR_START(str) \
do {if (ncr53c9x_debug & NCR_SHOWSTART) printf str;}while (0)
#define NCR_PHASE(str) \
do {if (ncr53c9x_debug & NCR_SHOWPHASE) printf str;}while (0)
#define NCR_DMA(str) \
do {if (ncr53c9x_debug & NCR_SHOWDMA) printf str;}while (0)
#define NCR_MSGS(str) \
do {if (ncr53c9x_debug & NCR_SHOWMSGS) printf str;}while (0)
#else
#define NCR_ECBS(str)
#define NCR_MISC(str)
#define NCR_INTS(str)
#define NCR_TRACE(str)
#define NCR_CMDS(str)
#define NCR_START(str)
#define NCR_PHASE(str)
#define NCR_DMA(str)
#define NCR_MSGS(str)
#endif
#define NCR_MAX_MSG_LEN 8
struct ncr53c9x_softc;
/*
* Function switch used as glue to MD code.
*/
struct ncr53c9x_glue {
/* Mandatory entry points. */
u_char (*gl_read_reg) __P((struct ncr53c9x_softc *, int));
void (*gl_write_reg) __P((struct ncr53c9x_softc *, int, u_char));
int (*gl_dma_isintr) __P((struct ncr53c9x_softc *));
void (*gl_dma_reset) __P((struct ncr53c9x_softc *));
int (*gl_dma_intr) __P((struct ncr53c9x_softc *));
int (*gl_dma_setup) __P((struct ncr53c9x_softc *,
caddr_t *, size_t *, int, size_t *));
void (*gl_dma_go) __P((struct ncr53c9x_softc *));
void (*gl_dma_stop) __P((struct ncr53c9x_softc *));
int (*gl_dma_isactive) __P((struct ncr53c9x_softc *));
/* Optional entry points. */
void (*gl_clear_latched_intr) __P((struct ncr53c9x_softc *));
};
struct ncr53c9x_softc {
struct device sc_dev; /* us as a device */
struct evcnt sc_intrcnt; /* intr count */
struct scsipi_link sc_link; /* scsipi lint struct */
struct ncr53c9x_glue *sc_glue; /* glue to MD code */
int sc_cfflags; /* Copy of config flags */
/* register defaults */
u_char sc_cfg1; /* Config 1 */
u_char sc_cfg2; /* Config 2, not ESP100 */
u_char sc_cfg3; /* Config 3, only ESP200 */
u_char sc_ccf; /* Clock Conversion */
u_char sc_timeout;
/* register copies, see espreadregs() */
u_char sc_espintr;
u_char sc_espstat;
u_char sc_espstep;
u_char sc_espfflags;
/* Lists of command blocks */
TAILQ_HEAD(ecb_list, ncr53c9x_ecb) free_list,
ready_list,
nexus_list;
struct ncr53c9x_ecb *sc_nexus; /* current command */
struct ncr53c9x_ecb sc_ecb[3*8]; /* three per target */
struct ncr53c9x_tinfo sc_tinfo[8];
/* Data about the current nexus (updated for every cmd switch) */
caddr_t sc_dp; /* Current data pointer */
ssize_t sc_dleft; /* Data left to transfer */
/* Adapter state */
int sc_phase; /* Copy of what bus phase we are in */
int sc_prevphase; /* Copy of what bus phase we were in */
u_char sc_state; /* State applicable to the adapter */
u_char sc_flags;
u_char sc_selid;
u_char sc_lastcmd;
/* Message stuff */
u_char sc_msgpriq; /* One or more messages to send (encoded) */
u_char sc_msgout; /* What message is on its way out? */
u_char sc_msgoutq; /* What messages have been sent so far? */
u_char *sc_omess; /* MSGOUT buffer */
caddr_t sc_omp; /* Message pointer (for multibyte messages) */
size_t sc_omlen;
u_char *sc_imess; /* MSGIN buffer */
caddr_t sc_imp; /* Message pointer (for multibyte messages) */
size_t sc_imlen;
caddr_t sc_cmdp; /* Command pointer (for DMAed commands) */
size_t sc_cmdlen; /* Size of command in transit */
/* hardware/openprom stuff */
int sc_freq; /* Freq in HZ */
int sc_id; /* our scsi id */
int sc_rev; /* esp revision */
int sc_features; /* chip features */
int sc_minsync; /* minimum sync period / 4 */
int sc_maxxfer; /* maximum transfer size */
};
/* values for sc_state */
#define NCR_IDLE 1 /* waiting for something to do */
#define NCR_SELECTING 2 /* SCSI command is arbiting */
#define NCR_RESELECTED 3 /* Has been reselected */
#define NCR_CONNECTED 4 /* Actively using the SCSI bus */
#define NCR_DISCONNECT 5 /* MSG_DISCONNECT received */
#define NCR_CMDCOMPLETE 6 /* MSG_CMDCOMPLETE received */
#define NCR_CLEANING 7
#define NCR_SBR 8 /* Expect a SCSI RST because we commanded it */
/* values for sc_flags */
#define NCR_DROP_MSGI 0x01 /* Discard all msgs (parity err detected) */
#define NCR_ABORTING 0x02 /* Bailing out */
#define NCR_DOINGDMA 0x04 /* The FIFO data path is active! */
#define NCR_SYNCHNEGO 0x08 /* Synch negotiation in progress. */
#define NCR_ICCS 0x10 /* Expect status phase results */
#define NCR_WAITI 0x20 /* Waiting for non-DMA data to arrive */
#define NCR_ATN 0x40 /* ATN asserted */
#define NCR_EXPECT_ILLCMD 0x80 /* Expect Illegal Command Interrupt */
/* values for sc_features */
#define NCR_F_HASCFG3 0x01 /* chip has CFG3 register */
#define NCR_F_FASTSCSI 0x02 /* chip supports Fast mode */
/* values for sc_msgout */
#define SEND_DEV_RESET 0x01
#define SEND_PARITY_ERROR 0x02
#define SEND_INIT_DET_ERR 0x04
#define SEND_REJECT 0x08
#define SEND_IDENTIFY 0x10
#define SEND_ABORT 0x20
#define SEND_SDTR 0x40
#define SEND_WDTR 0x80
/* SCSI Status codes */
#define ST_MASK 0x3e /* bit 0,6,7 is reserved */
/* phase bits */
#define IOI 0x01
#define CDI 0x02
#define MSGI 0x04
/* Information transfer phases */
#define DATA_OUT_PHASE (0)
#define DATA_IN_PHASE (IOI)
#define COMMAND_PHASE (CDI)
#define STATUS_PHASE (CDI|IOI)
#define MESSAGE_OUT_PHASE (MSGI|CDI)
#define MESSAGE_IN_PHASE (MSGI|CDI|IOI)
#define PHASE_MASK (MSGI|CDI|IOI)
/* Some pseudo phases for getphase()*/
#define BUSFREE_PHASE 0x100 /* Re/Selection no longer valid */
#define INVALID_PHASE 0x101 /* Re/Selection valid, but no REQ yet */
#define PSEUDO_PHASE 0x100 /* "pseudo" bit */
/*
* Macros to read and write the chip's registers.
*/
#define NCR_READ_REG(sc, reg) \
(*(sc)->sc_glue->gl_read_reg)((sc), (reg))
#define NCR_WRITE_REG(sc, reg, val) \
(*(sc)->sc_glue->gl_write_reg)((sc), (reg), (val))
#ifdef NCR53C9X_DEBUG
#define NCRCMD(sc, cmd) do { \
if (ncr53c9x_debug & NCR_SHOWCCMDS) \
printf("<cmd:0x%x>", (unsigned)cmd); \
sc->sc_lastcmd = cmd; \
NCR_WRITE_REG(sc, NCR_CMD, cmd); \
} while (0)
#else
#define NCRCMD(sc, cmd) NCR_WRITE_REG(sc, NCR_CMD, cmd)
#endif
/*
* DMA macros for NCR53c9x
*/
#define NCRDMA_ISINTR(sc) (*(sc)->sc_glue->gl_dma_isintr)((sc))
#define NCRDMA_RESET(sc) (*(sc)->sc_glue->gl_dma_reset)((sc))
#define NCRDMA_INTR(sc) (*(sc)->sc_glue->gl_dma_intr)((sc))
#define NCRDMA_SETUP(sc, addr, len, datain, dmasize) \
(*(sc)->sc_glue->gl_dma_setup)((sc), (addr), (len), (datain), (dmasize))
#define NCRDMA_GO(sc) (*(sc)->sc_glue->gl_dma_go)((sc))
#define NCRDMA_ISACTIVE(sc) (*(sc)->sc_glue->gl_dma_isactive)((sc))
/*
* Macro to convert the chip register Clock Per Byte value to
* Sunchronous Transfer Period.
*/
#define ncr53c9x_cpb2stp(sc, cpb) \
((250 * (cpb)) / (sc)->sc_freq)
void ncr53c9x_attach __P((struct ncr53c9x_softc *,
struct scsipi_adapter *, struct scsipi_device *));
int ncr53c9x_scsi_cmd __P((struct scsipi_xfer *));
void ncr53c9x_reset __P((struct ncr53c9x_softc *));
int ncr53c9x_intr __P((struct ncr53c9x_softc *));
1997-07-20 20:24:00 +04:00
extern int ncr53c9x_dmaselect;
extern int ncr53c9x_dmaselect;