183 lines
6.3 KiB
C
183 lines
6.3 KiB
C
|
/* $NetBSD: ncr5380reg.h,v 1.1.1.1 1995/03/26 07:12:15 leo Exp $ */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Copyright (c) 1995 Leo Weppelman.
|
||
|
|
* All rights reserved.
|
||
|
|
*
|
||
|
|
* Redistribution and use in source and binary forms, with or without
|
||
|
|
* modification, are permitted provided that the following conditions
|
||
|
|
* are met:
|
||
|
|
* 1. Redistributions of source code must retain the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer.
|
||
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
||
|
|
* notice, this list of conditions and the following disclaimer in the
|
||
|
|
* documentation and/or other materials provided with the distribution.
|
||
|
|
* 3. All advertising materials mentioning features or use of this software
|
||
|
|
* must display the following acknowledgement:
|
||
|
|
* This product includes software developed by Leo Weppelman.
|
||
|
|
* 4. The name of the author may not be used to endorse or promote products
|
||
|
|
* derived from this software without specific prior written permission
|
||
|
|
*
|
||
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef _NCR5380REG_H
|
||
|
|
#define _NCR5380REG_H
|
||
|
|
/*
|
||
|
|
* Atari TT hardware:
|
||
|
|
* SCSI interface + DMA.
|
||
|
|
* The SCSI chip is an NCR5380
|
||
|
|
*/
|
||
|
|
|
||
|
|
|
||
|
|
#define SCSI_DMA ((struct scsi_dma *)AD_SCSI_DMA)
|
||
|
|
#define SCSI_5380 ((struct scsi_5380 *)AD_NCR5380)
|
||
|
|
|
||
|
|
struct scsi_dma {
|
||
|
|
volatile u_char s_dma_ptr[8]; /* use only the odd bytes */
|
||
|
|
volatile u_char s_dma_cnt[8]; /* use only the odd bytes */
|
||
|
|
volatile u_char s_dma_res[4]; /* data residue register */
|
||
|
|
volatile u_char s_dma_gap; /* not used */
|
||
|
|
volatile u_char s_dma_ctrl; /* control register */
|
||
|
|
};
|
||
|
|
|
||
|
|
#define set_scsi_dma(addr, val) (void)( \
|
||
|
|
{ \
|
||
|
|
u_char *address = (u_char*)addr+1; \
|
||
|
|
u_long nval = (u_long)val; \
|
||
|
|
__asm("movepl %0, %1@(0)": :"d" (nval), "a" (address)); \
|
||
|
|
})
|
||
|
|
|
||
|
|
#define get_scsi_dma(addr, res) ( \
|
||
|
|
{ \
|
||
|
|
u_char *address = (u_char*)addr+1; \
|
||
|
|
u_long nval; \
|
||
|
|
__asm("movepl %1@(0), %0": "=d" (nval) : "a" (address)); \
|
||
|
|
res = (u_long)nval; \
|
||
|
|
})
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Defines for DMA control register
|
||
|
|
*/
|
||
|
|
#define SD_BUSERR 0x80 /* 1 = transfer caused bus error*/
|
||
|
|
#define SD_ZERO 0x40 /* 1 = byte counter is zero */
|
||
|
|
#define SD_ENABLE 0x02 /* 1 = Enable DMA */
|
||
|
|
#define SD_OUT 0x01 /* Direction: memory to SCSI */
|
||
|
|
#define SD_IN 0x00 /* Direction: SCSI to memory */
|
||
|
|
|
||
|
|
struct scsi_5380 {
|
||
|
|
volatile u_char scsi_5380[16]; /* use only the odd bytes */
|
||
|
|
};
|
||
|
|
|
||
|
|
#define scsi_data scsi_5380[ 1] /* Data register */
|
||
|
|
#define scsi_icom scsi_5380[ 3] /* Initiator command register */
|
||
|
|
#define scsi_mode scsi_5380[ 5] /* Mode register */
|
||
|
|
#define scsi_tcom scsi_5380[ 7] /* Target command register */
|
||
|
|
#define scsi_idstat scsi_5380[ 9] /* Bus status register */
|
||
|
|
#define scsi_dmstat scsi_5380[11] /* DMA status register */
|
||
|
|
#define scsi_trcv scsi_5380[13] /* Target receive register */
|
||
|
|
#define scsi_ircv scsi_5380[15] /* Initiator receive register */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definitions for Initiator command register.
|
||
|
|
*/
|
||
|
|
#define SC_A_RST 0x80 /* RW - Assert RST */
|
||
|
|
#define SC_TEST 0x40 /* W - Test mode */
|
||
|
|
#define SC_AIP 0x40 /* R - Arbitration in progress */
|
||
|
|
#define SC_LA 0x20 /* R - Lost arbitration */
|
||
|
|
#define SC_A_ACK 0x10 /* RW - Assert ACK */
|
||
|
|
#define SC_A_BSY 0x08 /* RW - Assert BSY */
|
||
|
|
#define SC_A_SEL 0x04 /* RW - Assert SEL */
|
||
|
|
#define SC_A_ATN 0x02 /* RW - Assert ATN */
|
||
|
|
#define SC_ADTB 0x01 /* RW - Assert Data To Bus */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definitions for mode register
|
||
|
|
*/
|
||
|
|
#define SC_B_DMA 0x80 /* RW - Block mode DMA (not on TT!) */
|
||
|
|
#define SC_T_MODE 0x40 /* RW - Target mode */
|
||
|
|
#define SC_E_PAR 0x20 /* RW - Enable parity check */
|
||
|
|
#define SC_E_PARI 0x10 /* RW - Enable parity interrupt */
|
||
|
|
#define SC_E_EOPI 0x08 /* RW - Enable End Of Process Interrupt */
|
||
|
|
#define SC_MON_BSY 0x04 /* RW - Monitor BSY */
|
||
|
|
#define SC_M_DMA 0x02 /* RW - Set DMA mode */
|
||
|
|
#define SC_ARBIT 0x01 /* RW - Arbitrate */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definitions for tcom register
|
||
|
|
*/
|
||
|
|
#define SC_LBS 0x80 /* RW - Last Byte Send (not on TT!) */
|
||
|
|
#define SC_A_REQ 0x08 /* RW - Assert REQ */
|
||
|
|
#define SC_A_MSG 0x04 /* RW - Assert MSG */
|
||
|
|
#define SC_A_CD 0x02 /* RW - Assert C/D */
|
||
|
|
#define SC_A_IO 0x01 /* RW - Assert I/O */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definitions for idstat register
|
||
|
|
*/
|
||
|
|
#define SC_S_RST 0x80 /* R - RST is set */
|
||
|
|
#define SC_S_BSY 0x40 /* R - BSY is set */
|
||
|
|
#define SC_S_REQ 0x20 /* R - REQ is set */
|
||
|
|
#define SC_S_MSG 0x10 /* R - MSG is set */
|
||
|
|
#define SC_S_CD 0x08 /* R - C/D is set */
|
||
|
|
#define SC_S_IO 0x04 /* R - I/O is set */
|
||
|
|
#define SC_S_SEL 0x02 /* R - SEL is set */
|
||
|
|
#define SC_S_PAR 0x01 /* R - Parity bit */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definitions for dmastat register
|
||
|
|
*/
|
||
|
|
#define SC_END_DMA 0x80 /* R - End of DMA */
|
||
|
|
#define SC_DMA_REQ 0x40 /* R - DMA request */
|
||
|
|
#define SC_PAR_ERR 0x20 /* R - Parity error */
|
||
|
|
#define SC_IRQ_SET 0x10 /* R - IRQ is active */
|
||
|
|
#define SC_PHS_MTCH 0x08 /* R - Phase Match */
|
||
|
|
#define SC_BSY_ERR 0x04 /* R - Busy error */
|
||
|
|
#define SC_ATN_STAT 0x02 /* R - State of ATN line */
|
||
|
|
#define SC_ACK_STAT 0x01 /* R - State of ACK line */
|
||
|
|
#define SC_S_SEND 0x00 /* W - Start DMA output */
|
||
|
|
|
||
|
|
#define SC_CLINT { /* Clear interrupts */ \
|
||
|
|
int i = SCSI_5380->scsi_ircv; \
|
||
|
|
}
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Definition of SCSI-bus phases. The values are determined by signals
|
||
|
|
* on the SCSI-bus. DO NOT CHANGE!
|
||
|
|
* The values must be used to index the pointers in SCSI-PARMS.
|
||
|
|
*/
|
||
|
|
#define NR_PHASE 8
|
||
|
|
#define PH_DATAOUT 0
|
||
|
|
#define PH_DATAIN 1
|
||
|
|
#define PH_CMD 2
|
||
|
|
#define PH_STATUS 3
|
||
|
|
#define PH_RES1 4
|
||
|
|
#define PH_RES2 5
|
||
|
|
#define PH_MSGOUT 6
|
||
|
|
#define PH_MSGIN 7
|
||
|
|
|
||
|
|
#define PH_OUT(phase) (!(phase & 1)) /* TRUE if output phase */
|
||
|
|
#define PH_IN(phase) (phase & 1) /* TRUE if input phase */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Id of Host-adapter
|
||
|
|
*/
|
||
|
|
#define SC_HOST_ID 0x80
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Base setting for 5380 mode register
|
||
|
|
*/
|
||
|
|
#define IMODE_BASE SC_E_PAR
|
||
|
|
|
||
|
|
#endif /* _NCR5380REG_H */
|