NetBSD/sys/ufs/lfs/lfs_syscalls.c

1224 lines
32 KiB
C
Raw Normal View History

/* $NetBSD: lfs_syscalls.c,v 1.138 2010/07/01 13:00:57 hannken Exp $ */
/*-
* Copyright (c) 1999, 2000, 2001, 2002, 2003, 2007, 2007, 2008
* The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Konrad E. Schroder <perseant@hhhh.org>.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1991, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
1998-03-01 05:20:01 +03:00
* @(#)lfs_syscalls.c 8.10 (Berkeley) 5/14/95
*/
2001-11-08 05:39:06 +03:00
#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: lfs_syscalls.c,v 1.138 2010/07/01 13:00:57 hannken Exp $");
2001-11-08 05:39:06 +03:00
#ifndef LFS
# define LFS /* for prototypes in syscallargs.h */
#endif
1998-02-19 03:54:39 +03:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/mount.h>
#include <sys/vnode.h>
#include <sys/kernel.h>
2006-05-15 01:31:52 +04:00
#include <sys/kauth.h>
#include <sys/syscallargs.h>
#include <ufs/ufs/inode.h>
#include <ufs/ufs/ufsmount.h>
#include <ufs/ufs/ufs_extern.h>
#include <ufs/lfs/lfs.h>
#include <ufs/lfs/lfs_extern.h>
1996-02-10 01:28:45 +03:00
struct buf *lfs_fakebuf(struct lfs *, struct vnode *, int, size_t, void *);
int lfs_fasthashget(dev_t, ino_t, struct vnode **);
pid_t lfs_cleaner_pid = 0;
/*
1999-06-09 08:52:11 +04:00
* sys_lfs_markv:
*
* This will mark inodes and blocks dirty, so they are written into the log.
* It will block until all the blocks have been written. The segment create
* time passed in the block_info and inode_info structures is used to decide
* if the data is valid for each block (in case some process dirtied a block
* or inode that is being cleaned between the determination that a block is
* live and the lfs_markv call).
*
* 0 on success
* -1/errno is return on error.
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#ifdef USE_64BIT_SYSCALLS
int
sys_lfs_markv(struct lwp *l, const struct sys_lfs_markv_args *uap, register_t *retval)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
{
/* {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
syscallarg(fsid_t *) fsidp;
syscallarg(struct block_info *) blkiov;
syscallarg(int) blkcnt;
} */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
BLOCK_INFO *blkiov;
int blkcnt, error;
fsid_t fsid;
struct lfs *fs;
struct mount *mntp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return (error);
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
if ((mntp = vfs_getvfs(fsidp)) == NULL)
return (ENOENT);
fs = VFSTOUFS(mntp)->um_lfs;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkcnt = SCARG(uap, blkcnt);
if ((u_int) blkcnt > LFS_MARKV_MAXBLKCNT)
return (EINVAL);
KERNEL_LOCK(1, NULL);
blkiov = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO), LFS_NB_BLKIOV);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, blkiov), blkiov,
blkcnt * sizeof(BLOCK_INFO))) != 0)
goto out;
if ((error = lfs_markv(p, &fsid, blkiov, blkcnt)) == 0)
copyout(blkiov, SCARG(uap, blkiov),
blkcnt * sizeof(BLOCK_INFO));
out:
lfs_free(fs, blkiov, LFS_NB_BLKIOV);
KERNEL_UNLOCK_ONE(NULL);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return error;
}
#else
int
sys_lfs_markv(struct lwp *l, const struct sys_lfs_markv_args *uap, register_t *retval)
{
/* {
syscallarg(fsid_t *) fsidp;
syscallarg(struct block_info *) blkiov;
syscallarg(int) blkcnt;
} */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
BLOCK_INFO *blkiov;
BLOCK_INFO_15 *blkiov15;
int i, blkcnt, error;
fsid_t fsid;
struct lfs *fs;
struct mount *mntp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return (error);
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
if ((mntp = vfs_getvfs(&fsid)) == NULL)
return (ENOENT);
fs = VFSTOUFS(mntp)->um_lfs;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkcnt = SCARG(uap, blkcnt);
if ((u_int) blkcnt > LFS_MARKV_MAXBLKCNT)
return (EINVAL);
KERNEL_LOCK(1, NULL);
blkiov = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO), LFS_NB_BLKIOV);
blkiov15 = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO_15), LFS_NB_BLKIOV);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, blkiov), blkiov15,
blkcnt * sizeof(BLOCK_INFO_15))) != 0)
goto out;
for (i = 0; i < blkcnt; i++) {
blkiov[i].bi_inode = blkiov15[i].bi_inode;
blkiov[i].bi_lbn = blkiov15[i].bi_lbn;
blkiov[i].bi_daddr = blkiov15[i].bi_daddr;
blkiov[i].bi_segcreate = blkiov15[i].bi_segcreate;
blkiov[i].bi_version = blkiov15[i].bi_version;
blkiov[i].bi_bp = blkiov15[i].bi_bp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkiov[i].bi_size = blkiov15[i].bi_size;
}
if ((error = lfs_markv(l->l_proc, &fsid, blkiov, blkcnt)) == 0) {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
for (i = 0; i < blkcnt; i++) {
blkiov15[i].bi_inode = blkiov[i].bi_inode;
blkiov15[i].bi_lbn = blkiov[i].bi_lbn;
blkiov15[i].bi_daddr = blkiov[i].bi_daddr;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkiov15[i].bi_segcreate = blkiov[i].bi_segcreate;
blkiov15[i].bi_version = blkiov[i].bi_version;
blkiov15[i].bi_bp = blkiov[i].bi_bp;
blkiov15[i].bi_size = blkiov[i].bi_size;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
}
copyout(blkiov15, SCARG(uap, blkiov),
blkcnt * sizeof(BLOCK_INFO_15));
}
out:
lfs_free(fs, blkiov, LFS_NB_BLKIOV);
lfs_free(fs, blkiov15, LFS_NB_BLKIOV);
KERNEL_UNLOCK_ONE(NULL);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return error;
}
#endif
#define LFS_MARKV_MAX_BLOCKS (LFS_MAX_BUFS)
int
lfs_markv(struct proc *p, fsid_t *fsidp, BLOCK_INFO *blkiov,
int blkcnt)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
{
BLOCK_INFO *blkp;
IFILE *ifp;
struct buf *bp;
1996-02-10 01:28:45 +03:00
struct inode *ip = NULL;
struct lfs *fs;
struct mount *mntp;
struct vnode *vp = NULL;
ino_t lastino;
daddr_t b_daddr, v_daddr;
int cnt, error;
int do_again = 0;
int numrefed = 0;
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
ino_t maxino;
size_t obsize;
/* number of blocks/inodes that we have already bwrite'ed */
int nblkwritten, ninowritten;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((mntp = vfs_getvfs(fsidp)) == NULL)
return (ENOENT);
fs = VFSTOUFS(mntp)->um_lfs;
if (fs->lfs_ronly)
return EROFS;
maxino = (fragstoblks(fs, VTOI(fs->lfs_ivnode)->i_ffs1_blocks) -
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
fs->lfs_cleansz - fs->lfs_segtabsz) * fs->lfs_ifpb;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
cnt = blkcnt;
2005-02-27 01:31:44 +03:00
if ((error = vfs_busy(mntp, NULL)) != 0)
return (error);
/*
* This seglock is just to prevent the fact that we might have to sleep
* from allowing the possibility that our blocks might become
* invalid.
*
* It is also important to note here that unless we specify SEGM_CKP,
* any Ifile blocks that we might be asked to clean will never get
* to the disk.
*/
lfs_seglock(fs, SEGM_CLEAN | SEGM_CKP | SEGM_SYNC);
2005-02-27 01:31:44 +03:00
/* Mark blocks/inodes dirty. */
error = 0;
/* these were inside the initialization for the for loop */
v_daddr = LFS_UNUSED_DADDR;
lastino = LFS_UNUSED_INUM;
nblkwritten = ninowritten = 0;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
for (blkp = blkiov; cnt--; ++blkp)
{
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
/* Bounds-check incoming data, avoid panic for failed VGET */
if (blkp->bi_inode <= 0 || blkp->bi_inode >= maxino) {
error = EINVAL;
goto err3;
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
}
/*
* Get the IFILE entry (only once) and see if the file still
* exists.
*/
if (lastino != blkp->bi_inode) {
/*
* Finish the old file, if there was one. The presence
* of a usable vnode in vp is signaled by a valid v_daddr.
*/
if (v_daddr != LFS_UNUSED_DADDR) {
lfs_vunref(vp);
numrefed--;
}
/*
* Start a new file
*/
lastino = blkp->bi_inode;
if (blkp->bi_inode == LFS_IFILE_INUM)
v_daddr = fs->lfs_idaddr;
else {
LFS_IENTRY(ifp, fs, blkp->bi_inode, bp);
/* XXX fix for force write */
v_daddr = ifp->if_daddr;
brelse(bp, 0);
}
if (v_daddr == LFS_UNUSED_DADDR)
continue;
/* Get the vnode/inode. */
2005-02-27 01:31:44 +03:00
error = lfs_fastvget(mntp, blkp->bi_inode, v_daddr,
&vp,
(blkp->bi_lbn == LFS_UNUSED_LBN
? blkp->bi_bp
: NULL));
if (!error) {
numrefed++;
}
if (error) {
DLOG((DLOG_CLEAN, "lfs_markv: lfs_fastvget"
" failed with %d (ino %d, segment %d)\n",
error, blkp->bi_inode,
dtosn(fs, blkp->bi_daddr)));
/*
* If we got EAGAIN, that means that the
* Inode was locked. This is
* recoverable: just clean the rest of
* this segment, and let the cleaner try
* again with another. (When the
* cleaner runs again, this segment will
* sort high on the list, since it is
* now almost entirely empty.) But, we
* still set v_daddr = LFS_UNUSED_ADDR
* so as not to test this over and over
* again.
*/
if (error == EAGAIN) {
error = 0;
do_again++;
}
#ifdef DIAGNOSTIC
else if (error != ENOENT)
panic("lfs_markv VFS_VGET FAILED");
#endif
/* lastino = LFS_UNUSED_INUM; */
v_daddr = LFS_UNUSED_DADDR;
vp = NULL;
ip = NULL;
continue;
}
ip = VTOI(vp);
ninowritten++;
} else if (v_daddr == LFS_UNUSED_DADDR) {
/*
* This can only happen if the vnode is dead (or
* in any case we can't get it...e.g., it is
* inlocked). Keep going.
*/
continue;
}
/* Past this point we are guaranteed that vp, ip are valid. */
/* Can't clean VU_DIROP directories in case of truncation */
/* XXX - maybe we should mark removed dirs specially? */
if (vp->v_type == VDIR && (vp->v_uflag & VU_DIROP)) {
do_again++;
continue;
}
/* If this BLOCK_INFO didn't contain a block, keep going. */
if (blkp->bi_lbn == LFS_UNUSED_LBN) {
/* XXX need to make sure that the inode gets written in this case */
/* XXX but only write the inode if it's the right one */
if (blkp->bi_inode != LFS_IFILE_INUM) {
LFS_IENTRY(ifp, fs, blkp->bi_inode, bp);
2008-01-02 14:48:20 +03:00
if (ifp->if_daddr == blkp->bi_daddr) {
mutex_enter(&lfs_lock);
LFS_SET_UINO(ip, IN_CLEANING);
2008-01-02 14:48:20 +03:00
mutex_exit(&lfs_lock);
}
brelse(bp, 0);
}
continue;
}
b_daddr = 0;
if (VOP_BMAP(vp, blkp->bi_lbn, NULL, &b_daddr, NULL) ||
dbtofsb(fs, b_daddr) != blkp->bi_daddr)
{
if (dtosn(fs, dbtofsb(fs, b_daddr)) ==
dtosn(fs, blkp->bi_daddr))
{
DLOG((DLOG_CLEAN, "lfs_markv: wrong da same seg: %llx vs %llx\n",
(long long)blkp->bi_daddr, (long long)dbtofsb(fs, b_daddr)));
}
do_again++;
continue;
}
/*
* Check block sizes. The blocks being cleaned come from
* disk, so they should have the same size as their on-disk
* counterparts.
*/
if (blkp->bi_lbn >= 0)
obsize = blksize(fs, ip, blkp->bi_lbn);
else
obsize = fs->lfs_bsize;
/* Check for fragment size change */
if (blkp->bi_lbn >= 0 && blkp->bi_lbn < NDADDR) {
obsize = ip->i_lfs_fragsize[blkp->bi_lbn];
}
if (obsize != blkp->bi_size) {
DLOG((DLOG_CLEAN, "lfs_markv: ino %d lbn %lld wrong"
" size (%ld != %d), try again\n",
blkp->bi_inode, (long long)blkp->bi_lbn,
(long) obsize, blkp->bi_size));
do_again++;
continue;
}
/*
* If we get to here, then we are keeping the block. If
* it is an indirect block, we want to actually put it
* in the buffer cache so that it can be updated in the
* finish_meta section. If it's not, we need to
* allocate a fake buffer so that writeseg can perform
* the copyin and write the buffer.
*/
if (ip->i_number != LFS_IFILE_INUM && blkp->bi_lbn >= 0) {
/* Data Block */
bp = lfs_fakebuf(fs, vp, blkp->bi_lbn,
1999-03-26 00:39:18 +03:00
blkp->bi_size, blkp->bi_bp);
/* Pretend we used bread() to get it */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
bp->b_blkno = fsbtodb(fs, blkp->bi_daddr);
} else {
2002-12-18 17:05:50 +03:00
/* Indirect block or ifile */
if (blkp->bi_size != fs->lfs_bsize &&
ip->i_number != LFS_IFILE_INUM)
panic("lfs_markv: partial indirect block?"
" size=%d\n", blkp->bi_size);
bp = getblk(vp, blkp->bi_lbn, blkp->bi_size, 0, 0);
2008-01-02 14:48:20 +03:00
if (!(bp->b_oflags & (BO_DONE|BO_DELWRI))) {
/*
* The block in question was not found
* in the cache; i.e., the block that
* getblk() returned is empty. So, we
* can (and should) copy in the
* contents, because we've already
* determined that this was the right
* version of this block on disk.
*
* And, it can't have changed underneath
* us, because we have the segment lock.
*/
error = copyin(blkp->bi_bp, bp->b_data, blkp->bi_size);
if (error)
goto err2;
}
}
if ((error = lfs_bwrite_ext(bp, BW_CLEAN)) != 0)
goto err2;
nblkwritten++;
/*
* XXX should account indirect blocks and ifile pages as well
*/
if (nblkwritten + lblkno(fs, ninowritten * sizeof (struct ufs1_dinode))
> LFS_MARKV_MAX_BLOCKS) {
DLOG((DLOG_CLEAN, "lfs_markv: writing %d blks %d inos\n",
nblkwritten, ninowritten));
lfs_segwrite(mntp, SEGM_CLEAN);
nblkwritten = ninowritten = 0;
}
}
2005-02-27 01:31:44 +03:00
/*
* Finish the old file, if there was one
*/
if (v_daddr != LFS_UNUSED_DADDR) {
lfs_vunref(vp);
numrefed--;
}
2005-02-27 01:31:44 +03:00
#ifdef DIAGNOSTIC
if (numrefed != 0)
panic("lfs_markv: numrefed=%d", numrefed);
#endif
DLOG((DLOG_CLEAN, "lfs_markv: writing %d blks %d inos (check point)\n",
nblkwritten, ninowritten));
2005-02-27 01:31:44 +03:00
/*
* The last write has to be SEGM_SYNC, because of calling semantics.
* It also has to be SEGM_CKP, because otherwise we could write
* over the newly cleaned data contained in a checkpoint, and then
* we'd be unhappy at recovery time.
*/
lfs_segwrite(mntp, SEGM_CLEAN | SEGM_CKP | SEGM_SYNC);
2005-02-27 01:31:44 +03:00
lfs_segunlock(fs);
vfs_unbusy(mntp, false, NULL);
if (error)
return (error);
else if (do_again)
return EAGAIN;
return 0;
2005-02-27 01:31:44 +03:00
err2:
DLOG((DLOG_CLEAN, "lfs_markv err2\n"));
/*
* XXX we're here because copyin() failed.
* XXX it means that we can't trust the cleanerd. too bad.
* XXX how can we recover from this?
*/
err3:
KERNEL_UNLOCK_ONE(NULL);
/*
* XXX should do segwrite here anyway?
*/
if (v_daddr != LFS_UNUSED_DADDR) {
lfs_vunref(vp);
--numrefed;
}
lfs_segunlock(fs);
vfs_unbusy(mntp, false, NULL);
#ifdef DIAGNOSTIC
if (numrefed != 0)
panic("lfs_markv: numrefed=%d", numrefed);
#endif
return (error);
}
/*
1999-06-09 08:52:11 +04:00
* sys_lfs_bmapv:
*
* This will fill in the current disk address for arrays of blocks.
*
* 0 on success
* -1/errno is return on error.
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
#ifdef USE_64BIT_SYSCALLS
int
sys_lfs_bmapv(struct lwp *l, const struct sys_lfs_bmapv_args *uap, register_t *retval)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
{
/* {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
syscallarg(fsid_t *) fsidp;
syscallarg(struct block_info *) blkiov;
syscallarg(int) blkcnt;
} */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
BLOCK_INFO *blkiov;
int blkcnt, error;
fsid_t fsid;
struct lfs *fs;
struct mount *mntp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return (error);
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
if ((mntp = vfs_getvfs(&fsid)) == NULL)
return (ENOENT);
fs = VFSTOUFS(mntp)->um_lfs;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkcnt = SCARG(uap, blkcnt);
if ((u_int) blkcnt > SIZE_T_MAX / sizeof(BLOCK_INFO))
return (EINVAL);
KERNEL_LOCK(1, NULL);
blkiov = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO), LFS_NB_BLKIOV);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, blkiov), blkiov,
blkcnt * sizeof(BLOCK_INFO))) != 0)
goto out;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = lfs_bmapv(p, &fsid, blkiov, blkcnt)) == 0)
copyout(blkiov, SCARG(uap, blkiov),
blkcnt * sizeof(BLOCK_INFO));
out:
lfs_free(fs, blkiov, LFS_NB_BLKIOV);
KERNEL_UNLOCK_ONE(NULL);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return error;
}
#else
int
sys_lfs_bmapv(struct lwp *l, const struct sys_lfs_bmapv_args *uap, register_t *retval)
{
/* {
syscallarg(fsid_t *) fsidp;
syscallarg(struct block_info *) blkiov;
syscallarg(int) blkcnt;
} */
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
BLOCK_INFO *blkiov;
BLOCK_INFO_15 *blkiov15;
int i, blkcnt, error;
fsid_t fsid;
struct lfs *fs;
struct mount *mntp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return (error);
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
if ((mntp = vfs_getvfs(&fsid)) == NULL)
return (ENOENT);
fs = VFSTOUFS(mntp)->um_lfs;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkcnt = SCARG(uap, blkcnt);
if ((size_t) blkcnt > SIZE_T_MAX / sizeof(BLOCK_INFO))
return (EINVAL);
KERNEL_LOCK(1, NULL);
blkiov = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO), LFS_NB_BLKIOV);
blkiov15 = lfs_malloc(fs, blkcnt * sizeof(BLOCK_INFO_15), LFS_NB_BLKIOV);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((error = copyin(SCARG(uap, blkiov), blkiov15,
blkcnt * sizeof(BLOCK_INFO_15))) != 0)
goto out;
for (i = 0; i < blkcnt; i++) {
blkiov[i].bi_inode = blkiov15[i].bi_inode;
blkiov[i].bi_lbn = blkiov15[i].bi_lbn;
blkiov[i].bi_daddr = blkiov15[i].bi_daddr;
blkiov[i].bi_segcreate = blkiov15[i].bi_segcreate;
blkiov[i].bi_version = blkiov15[i].bi_version;
blkiov[i].bi_bp = blkiov15[i].bi_bp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkiov[i].bi_size = blkiov15[i].bi_size;
}
if ((error = lfs_bmapv(l->l_proc, &fsid, blkiov, blkcnt)) == 0) {
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
for (i = 0; i < blkcnt; i++) {
blkiov15[i].bi_inode = blkiov[i].bi_inode;
blkiov15[i].bi_lbn = blkiov[i].bi_lbn;
blkiov15[i].bi_daddr = blkiov[i].bi_daddr;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
blkiov15[i].bi_segcreate = blkiov[i].bi_segcreate;
blkiov15[i].bi_version = blkiov[i].bi_version;
blkiov15[i].bi_bp = blkiov[i].bi_bp;
blkiov15[i].bi_size = blkiov[i].bi_size;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
}
copyout(blkiov15, SCARG(uap, blkiov),
blkcnt * sizeof(BLOCK_INFO_15));
}
out:
lfs_free(fs, blkiov, LFS_NB_BLKIOV);
lfs_free(fs, blkiov15, LFS_NB_BLKIOV);
KERNEL_UNLOCK_ONE(NULL);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
return error;
}
#endif
int
lfs_bmapv(struct proc *p, fsid_t *fsidp, BLOCK_INFO *blkiov, int blkcnt)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
{
BLOCK_INFO *blkp;
IFILE *ifp;
struct buf *bp;
struct inode *ip = NULL;
struct lfs *fs;
struct mount *mntp;
1998-03-01 05:20:01 +03:00
struct ufsmount *ump;
struct vnode *vp;
ino_t lastino;
daddr_t v_daddr;
int cnt, error;
int numrefed = 0;
lfs_cleaner_pid = p->p_pid;
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
if ((mntp = vfs_getvfs(fsidp)) == NULL)
return (ENOENT);
2005-02-27 01:31:44 +03:00
ump = VFSTOUFS(mntp);
if ((error = vfs_busy(mntp, NULL)) != 0)
return (error);
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
cnt = blkcnt;
2005-02-27 01:31:44 +03:00
fs = VFSTOUFS(mntp)->um_lfs;
2005-02-27 01:31:44 +03:00
error = 0;
2005-02-27 01:31:44 +03:00
/* these were inside the initialization for the for loop */
v_daddr = LFS_UNUSED_DADDR;
lastino = LFS_UNUSED_INUM;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
for (blkp = blkiov; cnt--; ++blkp)
{
1998-03-01 05:20:01 +03:00
/*
* Get the IFILE entry (only once) and see if the file still
* exists.
1998-03-01 05:20:01 +03:00
*/
if (lastino != blkp->bi_inode) {
/*
* Finish the old file, if there was one. The presence
* of a usable vnode in vp is signaled by a valid
* v_daddr.
*/
if (v_daddr != LFS_UNUSED_DADDR) {
lfs_vunref(vp);
numrefed--;
}
/*
* Start a new file
*/
lastino = blkp->bi_inode;
if (blkp->bi_inode == LFS_IFILE_INUM)
v_daddr = fs->lfs_idaddr;
else {
LFS_IENTRY(ifp, fs, blkp->bi_inode, bp);
v_daddr = ifp->if_daddr;
brelse(bp, 0);
}
if (v_daddr == LFS_UNUSED_DADDR) {
blkp->bi_daddr = LFS_UNUSED_DADDR;
continue;
}
/*
* A regular call to VFS_VGET could deadlock
* here. Instead, we try an unlocked access.
*/
2008-01-02 14:48:20 +03:00
mutex_enter(&ufs_ihash_lock);
vp = ufs_ihashlookup(ump->um_dev, blkp->bi_inode);
if (vp != NULL && !(vp->v_iflag & VI_XLOCK)) {
ip = VTOI(vp);
2008-01-02 14:48:20 +03:00
mutex_enter(&vp->v_interlock);
mutex_exit(&ufs_ihash_lock);
if (lfs_vref(vp)) {
v_daddr = LFS_UNUSED_DADDR;
continue;
}
numrefed++;
} else {
2008-01-02 14:48:20 +03:00
mutex_exit(&ufs_ihash_lock);
Various minor LFS improvements: * Note when lfs_putpages(9) thinks it is not going to be writing any pages before calling genfs_putpages(9). This prevents a situation in which blocks can be queued for writing without a segment header. * Correct computation of NRESERVE(), though it is still a gross overestimate in most cases. Note that if NRESERVE() is too high, it may be impossible to create files on the filesystem. We catch this case on filesystem mount and refuse to mount r/w. * Allow filesystems to be mounted whose block size is == MAXBSIZE. * Somewhere along the line, ufs_bmaparray(9) started mangling UNWRITTEN entries in indirect blocks again, triggering a failed assertion "daddr <= LFS_MAX_DADDR". Explicitly convert to and from int32_t to correct this. * Add a high-water mark for the number of dirty pages any given LFS can hold before triggering a flush. This is settable by sysctl, but off (zero) by default. * Be more careful about the MAX_BYTES and MAX_BUFS computations so we shouldn't see "please increase to at least zero" messages. * Note that VBLK and VCHR vnodes can have nonzero values in di_db[0] even though their v_size == 0. Don't panic when we see this. * Change lfs_bfree to a signed quantity. The manner in which it is processed before being passed to the cleaner means that sometimes it may drop below zero, and the cleaner must be aware of this. * Never report bfree < 0 (or higher than lfs_dsize) through lfs_statvfs(9). This prevents df(1) from ever telling us that our full filesystems have 16TB free. * Account space allocated through lfs_balloc(9) that does not have associated buffer headers, so that the pagedaemon doesn't run us out of segments. * Return ENOSPC from lfs_balloc(9) when bfree drops to zero. * Address a deadlock in lfs_bmapv/lfs_markv when the filesystem is being unmounted. Because vfs_busy() is a shared lock, and lfs_bmapv/lfs_markv mark the filesystem vfs_busy(), the cleaner can be holding the lock that umount() is blocking on, then try to vfs_busy() again in getnewvnode().
2005-02-26 08:40:42 +03:00
/*
* Don't VFS_VGET if we're being unmounted,
* since we hold vfs_busy().
*/
if (mntp->mnt_iflag & IMNT_UNMOUNT) {
v_daddr = LFS_UNUSED_DADDR;
continue;
}
error = VFS_VGET(mntp, blkp->bi_inode, &vp);
if (error) {
DLOG((DLOG_CLEAN, "lfs_bmapv: vget ino"
"%d failed with %d",
blkp->bi_inode,error));
v_daddr = LFS_UNUSED_DADDR;
continue;
} else {
KASSERT(VOP_ISLOCKED(vp));
VOP_UNLOCK(vp);
numrefed++;
}
}
ip = VTOI(vp);
} else if (v_daddr == LFS_UNUSED_DADDR) {
/*
* This can only happen if the vnode is dead.
* Keep going. Note that we DO NOT set the
* bi_addr to anything -- if we failed to get
* the vnode, for example, we want to assume
* conservatively that all of its blocks *are*
* located in the segment in question.
* lfs_markv will throw them out if we are
* wrong.
*/
/* blkp->bi_daddr = LFS_UNUSED_DADDR; */
continue;
}
/* Past this point we are guaranteed that vp, ip are valid. */
if (blkp->bi_lbn == LFS_UNUSED_LBN) {
/*
* We just want the inode address, which is
* conveniently in v_daddr.
*/
blkp->bi_daddr = v_daddr;
} else {
daddr_t bi_daddr;
/* XXX ondisk32 */
error = VOP_BMAP(vp, blkp->bi_lbn, NULL,
&bi_daddr, NULL);
if (error)
{
blkp->bi_daddr = LFS_UNUSED_DADDR;
continue;
}
blkp->bi_daddr = dbtofsb(fs, bi_daddr);
/* Fill in the block size, too */
if (blkp->bi_lbn >= 0)
blkp->bi_size = blksize(fs, ip, blkp->bi_lbn);
else
blkp->bi_size = fs->lfs_bsize;
}
}
2005-02-27 01:31:44 +03:00
/*
* Finish the old file, if there was one. The presence
* of a usable vnode in vp is signaled by a valid v_daddr.
*/
if (v_daddr != LFS_UNUSED_DADDR) {
lfs_vunref(vp);
numrefed--;
}
2005-02-27 01:31:44 +03:00
#ifdef DIAGNOSTIC
if (numrefed != 0)
panic("lfs_bmapv: numrefed=%d", numrefed);
#endif
2005-02-27 01:31:44 +03:00
vfs_unbusy(mntp, false, NULL);
2005-02-27 01:31:44 +03:00
return 0;
}
/*
1999-06-09 08:52:11 +04:00
* sys_lfs_segclean:
*
* Mark the segment clean.
*
* 0 on success
* -1/errno is return on error.
*/
int
sys_lfs_segclean(struct lwp *l, const struct sys_lfs_segclean_args *uap, register_t *retval)
{
/* {
syscallarg(fsid_t *) fsidp;
syscallarg(u_long) segment;
} */
struct lfs *fs;
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
struct mount *mntp;
fsid_t fsid;
int error;
unsigned long segnum;
2005-02-27 01:31:44 +03:00
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
return (error);
2005-02-27 01:31:44 +03:00
1996-02-10 01:28:45 +03:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
1998-03-01 05:20:01 +03:00
if ((mntp = vfs_getvfs(&fsid)) == NULL)
return (ENOENT);
2005-02-27 01:31:44 +03:00
fs = VFSTOUFS(mntp)->um_lfs;
segnum = SCARG(uap, segment);
2005-02-27 01:31:44 +03:00
if ((error = vfs_busy(mntp, NULL)) != 0)
return (error);
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
KERNEL_LOCK(1, NULL);
lfs_seglock(fs, SEGM_PROT);
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
error = lfs_do_segclean(fs, segnum);
lfs_segunlock(fs);
KERNEL_UNLOCK_ONE(NULL);
vfs_unbusy(mntp, false, NULL);
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
return error;
}
/*
* Actually mark the segment clean.
* Must be called with the segment lock held.
*/
int
lfs_do_segclean(struct lfs *fs, unsigned long segnum)
{
extern int lfs_dostats;
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
struct buf *bp;
CLEANERINFO *cip;
SEGUSE *sup;
2005-02-27 01:31:44 +03:00
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
if (dtosn(fs, fs->lfs_curseg) == segnum) {
return (EBUSY);
}
2005-02-27 01:31:44 +03:00
LFS_SEGENTRY(sup, fs, segnum, bp);
if (sup->su_nbytes) {
DLOG((DLOG_CLEAN, "lfs_segclean: not cleaning segment %lu:"
" %d live bytes\n", segnum, sup->su_nbytes));
brelse(bp, 0);
return (EBUSY);
}
if (sup->su_flags & SEGUSE_ACTIVE) {
DLOG((DLOG_CLEAN, "lfs_segclean: not cleaning segment %lu:"
" segment is active\n", segnum));
brelse(bp, 0);
return (EBUSY);
}
if (!(sup->su_flags & SEGUSE_DIRTY)) {
DLOG((DLOG_CLEAN, "lfs_segclean: not cleaning segment %lu:"
" segment is already clean\n", segnum));
brelse(bp, 0);
return (EALREADY);
}
2005-02-27 01:31:44 +03:00
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_avail += segtod(fs, 1);
if (sup->su_flags & SEGUSE_SUPERBLOCK)
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_avail -= btofsb(fs, LFS_SBPAD);
if (fs->lfs_version > 1 && segnum == 0 &&
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_start < btofsb(fs, LFS_LABELPAD))
fs->lfs_avail -= btofsb(fs, LFS_LABELPAD) - fs->lfs_start;
2008-01-02 14:48:20 +03:00
mutex_enter(&lfs_lock);
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs->lfs_bfree += sup->su_nsums * btofsb(fs, fs->lfs_sumsize) +
btofsb(fs, sup->su_ninos * fs->lfs_ibsize);
fs->lfs_dmeta -= sup->su_nsums * btofsb(fs, fs->lfs_sumsize) +
btofsb(fs, sup->su_ninos * fs->lfs_ibsize);
if (fs->lfs_dmeta < 0)
fs->lfs_dmeta = 0;
2008-01-02 14:48:20 +03:00
mutex_exit(&lfs_lock);
sup->su_flags &= ~SEGUSE_DIRTY;
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
LFS_WRITESEGENTRY(sup, fs, segnum, bp);
2005-02-27 01:31:44 +03:00
LFS_CLEANERINFO(cip, fs, bp);
++cip->clean;
--cip->dirty;
fs->lfs_nclean = cip->clean;
Various bug-fixes to LFS, to wit: Kernel: * Add runtime quantity lfs_ravail, the number of disk-blocks reserved for writing. Writes to the filesystem first reserve a maximum amount of blocks before their write is allowed to proceed; after the blocks are allocated the reserved total is reduced by a corresponding amount. If the lfs_reserve function cannot immediately reserve the requested number of blocks, the inode is unlocked, and the thread sleeps until the cleaner has made enough space available for the blocks to be reserved. In this way large files can be written to the filesystem (or, smaller files can be written to a nearly-full but thoroughly clean filesystem) and the cleaner can still function properly. * Remove explicit switching on dlfs_minfreeseg from the kernel code; it is now merely a fs-creation parameter used to compute dlfs_avail and dlfs_bfree (and used by fsck_lfs(8) to check their accuracy). Its former role is better assumed by a properly computed dlfs_avail. * Bounds-check inode numbers submitted through lfs_bmapv and lfs_markv. This prevents a panic, but, if the cleaner is feeding the filesystem the wrong data, you are still in a world of hurt. * Cleanup: remove explicit references of DEV_BSIZE in favor of btodb()/dbtob(). lfs_cleanerd: * Make -n mean "send N segments' blocks through a single call to lfs_markv". Previously it had meant "clean N segments though N calls to lfs_markv, before looking again to see if more need to be cleaned". The new behavior gives better packing of direct data on disk with as little metadata as possible, largely alleviating the problem that the cleaner can consume more disk through inefficient use of metadata than it frees by moving dirty data away from clean "holes" to produce entirely clean segments. * Make -b mean "read as many segments as necessary to write N segments of dirty data back to disk", rather than its former meaning of "read as many segments as necessary to free N segments worth of space". The new meaning, combined with the new -n behavior described above, further aids in cleaning storage efficiency as entire segments can be written at once, using as few blocks as possible for segment summaries and inode blocks. * Make the cleaner take note of segments which could not be cleaned due to error, and not attempt to clean them until they are entirely free of dirty blocks. This prevents the case in which a cleanerd running with -n 1 and without -b (formerly the default) would spin trying repeatedly to clean a corrupt segment, while the remaining space filled and deadlocked the filesystem. * Update the lfs_cleanerd manual page to describe all the options, including the changes mentioned here (in particular, the -b and -n flags were previously undocumented). fsck_lfs: * Check, and optionally fix, lfs_avail (to an exact figure) and lfs_bfree (within a margin of error) in pass 5. newfs_lfs: * Reduce the default dlfs_minfreeseg to 1/20 of the total segments. * Add a warning if the sgs disklabel field is 16 (the default for FFS' cpg, but not usually desirable for LFS' sgs: 5--8 is a better range). * Change the calculation of lfs_avail and lfs_bfree, corresponding to the kernel changes mentioned above. mount_lfs: * Add -N and -b options to pass corresponding -n and -b options to lfs_cleanerd. * Default to calling lfs_cleanerd with "-b -n 4". [All of these changes were largely tested in the 1.5 branch, with the idea that they (along with previous un-pulled-up work) could be applied to the branch while it was still in ALPHA2; however my test system has experienced corruption on another filesystem (/dev/console has gone missing :^), and, while I believe this unrelated to the LFS changes, I cannot with good conscience request that the changes be pulled up.]
2000-09-09 08:49:54 +04:00
cip->bfree = fs->lfs_bfree;
2008-01-02 14:48:20 +03:00
mutex_enter(&lfs_lock);
Various minor LFS improvements: * Note when lfs_putpages(9) thinks it is not going to be writing any pages before calling genfs_putpages(9). This prevents a situation in which blocks can be queued for writing without a segment header. * Correct computation of NRESERVE(), though it is still a gross overestimate in most cases. Note that if NRESERVE() is too high, it may be impossible to create files on the filesystem. We catch this case on filesystem mount and refuse to mount r/w. * Allow filesystems to be mounted whose block size is == MAXBSIZE. * Somewhere along the line, ufs_bmaparray(9) started mangling UNWRITTEN entries in indirect blocks again, triggering a failed assertion "daddr <= LFS_MAX_DADDR". Explicitly convert to and from int32_t to correct this. * Add a high-water mark for the number of dirty pages any given LFS can hold before triggering a flush. This is settable by sysctl, but off (zero) by default. * Be more careful about the MAX_BYTES and MAX_BUFS computations so we shouldn't see "please increase to at least zero" messages. * Note that VBLK and VCHR vnodes can have nonzero values in di_db[0] even though their v_size == 0. Don't panic when we see this. * Change lfs_bfree to a signed quantity. The manner in which it is processed before being passed to the cleaner means that sometimes it may drop below zero, and the cleaner must be aware of this. * Never report bfree < 0 (or higher than lfs_dsize) through lfs_statvfs(9). This prevents df(1) from ever telling us that our full filesystems have 16TB free. * Account space allocated through lfs_balloc(9) that does not have associated buffer headers, so that the pagedaemon doesn't run us out of segments. * Return ENOSPC from lfs_balloc(9) when bfree drops to zero. * Address a deadlock in lfs_bmapv/lfs_markv when the filesystem is being unmounted. Because vfs_busy() is a shared lock, and lfs_bmapv/lfs_markv mark the filesystem vfs_busy(), the cleaner can be holding the lock that umount() is blocking on, then try to vfs_busy() again in getnewvnode().
2005-02-26 08:40:42 +03:00
cip->avail = fs->lfs_avail - fs->lfs_ravail - fs->lfs_favail;
wakeup(&fs->lfs_avail);
2008-01-02 14:48:20 +03:00
mutex_exit(&lfs_lock);
(void) LFS_BWRITE_LOG(bp);
if (lfs_dostats)
++lfs_stats.segs_reclaimed;
return (0);
}
/*
* This will block until a segment in file system fsid is written. A timeout
* in milliseconds may be specified which will awake the cleaner automatically.
* An fsid of -1 means any file system, and a timeout of 0 means forever.
*/
int
lfs_segwait(fsid_t *fsidp, struct timeval *tv)
{
struct mount *mntp;
void *addr;
u_long timeout;
int error;
KERNEL_LOCK(1, NULL);
if (fsidp == NULL || (mntp = vfs_getvfs(fsidp)) == NULL)
addr = &lfs_allclean_wakeup;
else
addr = &VFSTOUFS(mntp)->um_lfs->lfs_nextseg;
/*
* XXX THIS COULD SLEEP FOREVER IF TIMEOUT IS {0,0}!
* XXX IS THAT WHAT IS INTENDED?
*/
timeout = tvtohz(tv);
error = tsleep(addr, PCATCH | PVFS, "segment", timeout);
KERNEL_UNLOCK_ONE(NULL);
return (error == ERESTART ? EINTR : 0);
}
/*
* sys_lfs_segwait:
*
* System call wrapper around lfs_segwait().
*
* 0 on success
* 1 on timeout
* -1/errno is return on error.
*/
int
2009-01-11 05:45:45 +03:00
sys___lfs_segwait50(struct lwp *l, const struct sys___lfs_segwait50_args *uap,
register_t *retval)
{
/* {
syscallarg(fsid_t *) fsidp;
syscallarg(struct timeval *) tv;
} */
struct timeval atv;
fsid_t fsid;
int error;
2005-02-27 01:31:44 +03:00
/* XXX need we be su to segwait? */
if ((error = kauth_authorize_generic(l->l_cred, KAUTH_GENERIC_ISSUSER,
NULL)) != 0)
return (error);
1996-02-10 01:28:45 +03:00
if ((error = copyin(SCARG(uap, fsidp), &fsid, sizeof(fsid_t))) != 0)
return (error);
2005-02-27 01:31:44 +03:00
if (SCARG(uap, tv)) {
1996-02-10 01:28:45 +03:00
error = copyin(SCARG(uap, tv), &atv, sizeof(struct timeval));
if (error)
return (error);
if (itimerfix(&atv))
return (EINVAL);
} else /* NULL or invalid */
atv.tv_sec = atv.tv_usec = 0;
return lfs_segwait(&fsid, &atv);
}
/*
* VFS_VGET call specialized for the cleaner. The cleaner already knows the
* daddr from the ifile, so don't look it up again. If the cleaner is
* processing IINFO structures, it may have the ondisk inode already, so
* don't go retrieving it again.
*
* we lfs_vref, and it is the caller's responsibility to lfs_vunref
* when finished.
*/
int
lfs_fasthashget(dev_t dev, ino_t ino, struct vnode **vpp)
{
2008-01-02 14:48:20 +03:00
struct vnode *vp;
mutex_enter(&ufs_ihash_lock);
if ((vp = ufs_ihashlookup(dev, ino)) != NULL) {
mutex_enter(&vp->v_interlock);
mutex_exit(&ufs_ihash_lock);
if (vp->v_iflag & VI_XLOCK) {
DLOG((DLOG_CLEAN, "lfs_fastvget: ino %d VI_XLOCK\n",
ino));
lfs_stats.clean_vnlocked++;
2008-01-02 14:48:20 +03:00
mutex_exit(&vp->v_interlock);
return EAGAIN;
}
2008-01-02 14:48:20 +03:00
if (lfs_vref(vp)) {
DLOG((DLOG_CLEAN, "lfs_fastvget: lfs_vref failed"
" for ino %d\n", ino));
lfs_stats.clean_inlocked++;
return EAGAIN;
}
2008-01-02 14:48:20 +03:00
} else {
mutex_exit(&ufs_ihash_lock);
}
*vpp = vp;
return (0);
}
int
lfs_fastvget(struct mount *mp, ino_t ino, daddr_t daddr, struct vnode **vpp,
struct ufs1_dinode *dinp)
{
2000-03-30 16:41:09 +04:00
struct inode *ip;
struct ufs1_dinode *dip;
struct vnode *vp;
struct ufsmount *ump;
dev_t dev;
int error, retries;
struct buf *bp;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
struct lfs *fs;
2005-02-27 01:31:44 +03:00
ump = VFSTOUFS(mp);
dev = ump->um_dev;
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
fs = ump->um_lfs;
/*
* Wait until the filesystem is fully mounted before allowing vget
* to complete. This prevents possible problems with roll-forward.
*/
2008-01-02 14:48:20 +03:00
mutex_enter(&lfs_lock);
while (fs->lfs_flags & LFS_NOTYET) {
2008-01-02 14:48:20 +03:00
mtsleep(&fs->lfs_flags, PRIBIO+1, "lfs_fnotyet", 0,
&lfs_lock);
}
2008-01-02 14:48:20 +03:00
mutex_exit(&lfs_lock);
/*
* This is playing fast and loose. Someone may have the inode
* locked, in which case they are going to be distinctly unhappy
* if we trash something.
*/
error = lfs_fasthashget(dev, ino, vpp);
if (error != 0 || *vpp != NULL)
return (error);
2005-02-27 01:31:44 +03:00
/*
Various minor LFS improvements: * Note when lfs_putpages(9) thinks it is not going to be writing any pages before calling genfs_putpages(9). This prevents a situation in which blocks can be queued for writing without a segment header. * Correct computation of NRESERVE(), though it is still a gross overestimate in most cases. Note that if NRESERVE() is too high, it may be impossible to create files on the filesystem. We catch this case on filesystem mount and refuse to mount r/w. * Allow filesystems to be mounted whose block size is == MAXBSIZE. * Somewhere along the line, ufs_bmaparray(9) started mangling UNWRITTEN entries in indirect blocks again, triggering a failed assertion "daddr <= LFS_MAX_DADDR". Explicitly convert to and from int32_t to correct this. * Add a high-water mark for the number of dirty pages any given LFS can hold before triggering a flush. This is settable by sysctl, but off (zero) by default. * Be more careful about the MAX_BYTES and MAX_BUFS computations so we shouldn't see "please increase to at least zero" messages. * Note that VBLK and VCHR vnodes can have nonzero values in di_db[0] even though their v_size == 0. Don't panic when we see this. * Change lfs_bfree to a signed quantity. The manner in which it is processed before being passed to the cleaner means that sometimes it may drop below zero, and the cleaner must be aware of this. * Never report bfree < 0 (or higher than lfs_dsize) through lfs_statvfs(9). This prevents df(1) from ever telling us that our full filesystems have 16TB free. * Account space allocated through lfs_balloc(9) that does not have associated buffer headers, so that the pagedaemon doesn't run us out of segments. * Return ENOSPC from lfs_balloc(9) when bfree drops to zero. * Address a deadlock in lfs_bmapv/lfs_markv when the filesystem is being unmounted. Because vfs_busy() is a shared lock, and lfs_bmapv/lfs_markv mark the filesystem vfs_busy(), the cleaner can be holding the lock that umount() is blocking on, then try to vfs_busy() again in getnewvnode().
2005-02-26 08:40:42 +03:00
* getnewvnode(9) will call vfs_busy, which will block if the
* filesystem is being unmounted; but umount(9) is waiting for
* us because we're already holding the fs busy.
* XXXMP
*/
if (mp->mnt_iflag & IMNT_UNMOUNT) {
*vpp = NULL;
return EDEADLK;
}
2000-07-03 22:22:10 +04:00
if ((error = getnewvnode(VT_LFS, mp, lfs_vnodeop_p, &vp)) != 0) {
*vpp = NULL;
return (error);
}
mutex_enter(&ufs_hashlock);
error = lfs_fasthashget(dev, ino, vpp);
if (error != 0 || *vpp != NULL) {
mutex_exit(&ufs_hashlock);
ungetnewvnode(vp);
return (error);
}
/* Allocate new vnode/inode. */
lfs_vcreate(mp, ino, vp);
/*
* Put it onto its hash chain and lock it so that other requests for
* this inode will block if they arrive while we are sleeping waiting
* for old data structures to be purged or for the contents of the
* disk portion of this inode to be read.
*/
ip = VTOI(vp);
ufs_ihashins(ip);
mutex_exit(&ufs_hashlock);
2005-02-27 01:31:44 +03:00
/*
* XXX
* This may not need to be here, logically it should go down with
* the i_devvp initialization.
* Ask Kirk.
*/
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
ip->i_lfs = fs;
/* Read in the disk contents for the inode, copy into the inode. */
1996-02-10 01:28:45 +03:00
if (dinp) {
error = copyin(dinp, ip->i_din.ffs1_din, sizeof (struct ufs1_dinode));
if (error) {
DLOG((DLOG_CLEAN, "lfs_fastvget: dinode copyin failed"
" for ino %d\n", ino));
ufs_ihashrem(ip);
/* Unlock and discard unneeded inode. */
VOP_UNLOCK(vp);
lfs_vunref(vp);
*vpp = NULL;
return (error);
}
if (ip->i_number != ino)
panic("lfs_fastvget: I was fed the wrong inode!");
} else {
retries = 0;
again:
Merge the short-lived perseant-lfsv2 branch into the trunk. Kernels and tools understand both v1 and v2 filesystems; newfs_lfs generates v2 by default. Changes for the v2 layout include: - Segments of non-PO2 size and arbitrary block offset, so these can be matched to convenient physical characteristics of the partition (e.g., stripe or track size and offset). - Address by fragment instead of by disk sector, paving the way for non-512-byte-sector devices. In theory fragments can be as large as you like, though in reality they must be smaller than MAXBSIZE in size. - Use serial number and filesystem identifier to ensure that roll-forward doesn't get old data and think it's new. Roll-forward is enabled for v2 filesystems, though not for v1 filesystems by default. - The inode free list is now a tailq, paving the way for undelete (undelete is not yet implemented, but can be without further non-backwards-compatible changes to disk structures). - Inode atime information is kept in the Ifile, instead of on the inode; that is, the inode is never written *just* because atime was changed. Because of this the inodes remain near the file data on the disk, rather than wandering all over as the disk is read repeatedly. This speeds up repeated reads by a small but noticeable amount. Other changes of note include: - The ifile written by newfs_lfs can now be of arbitrary length, it is no longer restricted to a single indirect block. - Fixed an old bug where ctime was changed every time a vnode was created. I need to look more closely to make sure that the times are only updated during write(2) and friends, not after-the-fact during a segment write, and certainly not by the cleaner.
2001-07-14 00:30:18 +04:00
error = bread(ump->um_devvp, fsbtodb(fs, daddr), fs->lfs_ibsize,
NOCRED, 0, &bp);
1996-02-10 01:28:45 +03:00
if (error) {
DLOG((DLOG_CLEAN, "lfs_fastvget: bread failed (%d)\n",
error));
/*
* The inode does not contain anything useful, so it
* would be misleading to leave it on its hash chain.
* Iput() will return it to the free list.
*/
ufs_ihashrem(ip);
2005-02-27 01:31:44 +03:00
/* Unlock and discard unneeded inode. */
VOP_UNLOCK(vp);
lfs_vunref(vp);
brelse(bp, 0);
*vpp = NULL;
return (error);
}
dip = lfs_ifind(ump->um_lfs, ino, bp);
if (dip == NULL) {
/* Assume write has not completed yet; try again */
brelse(bp, BC_INVAL);
++retries;
if (retries > LFS_IFIND_RETRIES)
panic("lfs_fastvget: dinode not found");
DLOG((DLOG_CLEAN, "lfs_fastvget: dinode not found,"
" retrying...\n"));
goto again;
}
*ip->i_din.ffs1_din = *dip;
brelse(bp, 0);
}
2003-11-07 17:52:27 +03:00
lfs_vinit(mp, &vp);
*vpp = vp;
KASSERT(VOP_ISLOCKED(vp));
VOP_UNLOCK(vp);
return (0);
}
/*
* Make up a "fake" cleaner buffer, copy the data from userland into it.
*/
struct buf *
lfs_fakebuf(struct lfs *fs, struct vnode *vp, int lbn, size_t size, void *uaddr)
{
struct buf *bp;
int error;
2002-12-18 17:05:50 +03:00
KASSERT(VTOI(vp)->i_number != LFS_IFILE_INUM);
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
bp = lfs_newbuf(VTOI(vp)->i_lfs, vp, lbn, size, LFS_NB_CLEAN);
error = copyin(uaddr, bp->b_data, size);
if (error) {
Add code to UBCify LFS. This is still behind "#ifdef LFS_UBC" for now (there are still some details to work out) but expect that to go away soon. To support these basic changes (creation of lfs_putpages, lfs_gop_write, mods to lfs_balloc) several other changes were made, to wit: * Create a writer daemon kernel thread whose purpose is to handle page writes for the pagedaemon, but which also takes over some of the functions of lfs_check(). This thread is started the first time an LFS is mounted. * Add a "flags" parameter to GOP_SIZE. Current values are GOP_SIZE_READ, meaning that the call should return the size of the in-core version of the file, and GOP_SIZE_WRITE, meaning that it should return the on-disk size. One of GOP_SIZE_READ or GOP_SIZE_WRITE must be specified. * Instead of using malloc(...M_WAITOK) for everything, reserve enough resources to get by and use malloc(...M_NOWAIT), using the reserves if necessary. Use the pool subsystem for structures small enough that this is feasible. This also obsoletes LFS_THROTTLE. And a few that are not strictly necessary: * Moves the LFS inode extensions off onto a separately allocated structure; getting closer to LFS as an LKM. "Welcome to 1.6O." * Unified GOP_ALLOC between FFS and LFS. * Update LFS copyright headers to correct values. * Actually cast to unsigned in lfs_shellsort, like the comment says. * Keep track of which segments were empty before the previous checkpoint; any segments that pass two checkpoints both dirty and empty can be summarily cleaned. Do this. Right now lfs_segclean still works, but this should be turned into an effectless compatibility syscall.
2003-02-18 02:48:08 +03:00
lfs_freebuf(fs, bp);
return NULL;
}
KDASSERT(bp->b_iodone == lfs_callback);
#if 0
2008-01-02 14:48:20 +03:00
mutex_enter(&lfs_lock);
++fs->lfs_iocount;
2008-01-02 14:48:20 +03:00
mutex_exit(&lfs_lock);
#endif
bp->b_bufsize = size;
bp->b_bcount = size;
return (bp);
}