NetBSD/sys/arch/pc532/dev/dpreg.h

112 lines
3.8 KiB
C
Raw Normal View History

1993-09-10 03:53:45 +04:00
/*
* Copyright (c) 1993 Philip A. Nelson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Philip A. Nelson.
* 4. The name of Philip A. Nelson may not be used to endorse or promote
* products derived from this software without specific prior written
* permission.
*
* THIS SOFTWARE IS PROVIDED BY PHILIP NELSON ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL PHILIP NELSON BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* dp.h: defines for the dp driver.
*
* $Id: dpreg.h,v 1.1.1.1 1993/09/09 23:53:53 phil Exp $
*/
/* Most of this comes from the Minix dp driver by Bruce Culbertson. */
/* NCR 8490 SCSI controller registers
*/
#define DP_CTL 0xffd00000 /* base for control registers */
#define DP_DMA 0xffe00000 /* base for data registers */
#define DP_DMA_EOP (DP_DMA | A22) /* SCSI DMA with EOP asserted */
#define A22 (1 << 22)
#define DP_CURDATA (DP_CTL+0)
#define DP_OUTDATA (DP_CTL+0)
#define DP_ICMD (DP_CTL+1)
#define DP_MODE (DP_CTL+2)
#define DP_TCMD (DP_CTL+3)
#define DP_STAT1 (DP_CTL+4)
#define DP_STAT2 (DP_CTL+5)
#define DP_START_SEND (DP_CTL+5)
#define DP_INDATA (DP_CTL+6)
#define DP_EMR_ISR (DP_CTL+7)
/* Bits in NCR 8490 registers
*/
#define DP_A_RST 0x80
#define DP_A_SEL 0x04
#define DP_S_SEL 0x02
#define DP_S_REQ 0x20
#define DP_S_BSY 0x40
#define DP_S_BSYERR 0x04
#define DP_S_PHASE 0x08
#define DP_S_IRQ 0x10
#define DP_S_DRQ 0x40
#define DP_M_DMA 0x02
#define DP_M_BSY 0x04
#define DP_ENABLE_DB 0x01
#define DP_EMODE 0x40 /* enhanced mode */
#define DP_EF_NOP 0x00 /* enhanced functions */
#define DP_EF_RESETIP 0x02
#define DP_EF_START_RCV 0x04
#define DP_EF_ISR_NEXT 0x06
#define DP_EMR_APHS 0x80
#define DP_ISR_BSYERR 0x04
#define DP_ISR_APHS 0x08
#define DP_ISR_DPHS 0x10
#define DP_INT_MASK (~(DP_ISR_APHS | DP_ISR_BSYERR))
#define dp_clear_isr() /* clear 8490 interrupts */ \
RD_ADR (u_char, DP_EMR_ISR); \
WR_ADR (u_char, DP_EMR_ISR, DP_EF_RESETIP); \
WR_ADR (u_char, DP_EMR_ISR, DP_EF_NOP | DP_EMR_APHS);
/* Status of interrupt routine.
*/
#define ISR_NOTDONE 0
#define ISR_OK 1
#define ISR_BSYERR 2
#define ISR_RSTERR 3
#define ISR_BADPHASE 4
#define ISR_TIMEOUT 5
#define ISR_DMACNTERR 6
#define ICU_ADR 0xfffffe00
#define ICU_IO (ICU_ADR+20)
#define ICU_DIR (ICU_ADR+21)
#define ICU_DATA (ICU_ADR+19)
#define ICU_SCSI_BIT 0x80
/* This tells when to poll and when to sleep while waiting for next
* SCSI phase. Sleep after command phase and out data phase.
*/
#define SCSI_SLEEP ((1<<PH_CMD) | (1<<PH_ODATA))
/* Miscellaneous
*/
#define MAX_WAIT 2000000
#define OK 1
#define NOT_OK 0