2011-02-20 10:48:33 +03:00
|
|
|
/* $NetBSD: adm5120_mainbusvar.h,v 1.2 2011/02/20 07:48:35 matt Exp $ */
|
Add a port to the Infineon ADM5120.
Basics: the ADM5120 is a 175 MHz MIPS32 4Kc processor featuring a
6-port ethernet 10/100 switch with Auto MDI/X, a PCI controller,
USB 1.1 controller, UART, watchdog timer, eight GPIO pins, and a
multiport memory controller with both NOR and NAND flash support.
This code supports most of the devices on the ADM5120, including
the 6-port switch (each port attaches as an ethernet, admsw0 through
admsw5), the PCI controller, USB controller, GPIO, watchdog, and
UART.
Remaining work: the port includes no NOR/NAND flash drivers. No
bootloader is included. I have only tested the PCI bus driver with
the use of one PCI slot on the RouterBOARD 153. It is not possible
to exploit the capabilities of the ethernet switch using bridge(4).
I have only netbooted the ADM5120 on the RB153. Booting other
boards, and booting from flash memory, remains to be done.
Hardware availability: many low-cost routers, including the
RouterBOARD 100 series at RouterBOARD.com, use the Infineon ADM5120
processor.
Credits: Ruslan Ermilov and Vsevolod Lobko ported to the ADM5120,
and they wrote device drivers for the UART, USB controller, and
10/100 switch. Matt Isaacs brought the port up-to-date with
NetBSD-current, made it compile, and ran it first on the RB153.
I added drivers for the PCI controller, GPIO, and watchdog timer.
I produced the bus attachment for the CompactFlash slot with advice
from Mikrotik technical support and from Matt Thomas.
2007-03-20 11:52:00 +03:00
|
|
|
|
|
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko.
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or
|
|
|
|
|
* without modification, are permitted provided that the following
|
|
|
|
|
* conditions are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above
|
|
|
|
|
* copyright notice, this list of conditions and the following
|
|
|
|
|
* disclaimer in the documentation and/or other materials provided
|
|
|
|
|
* with the distribution.
|
|
|
|
|
* 3. The names of the authors may not be used to endorse or promote
|
|
|
|
|
* products derived from this software without specific prior
|
|
|
|
|
* written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY
|
|
|
|
|
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
|
|
|
|
|
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
|
|
|
|
|
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS
|
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
|
|
|
|
|
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
|
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
|
|
|
|
|
* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
|
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
|
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
|
|
|
* OF SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#ifndef _ADM5120_MAINBUSVAR_H_
|
|
|
|
|
#define _ADM5120_MAINBUSVAR_H_
|
|
|
|
|
|
|
|
|
|
#include <sys/types.h>
|
|
|
|
|
#include <sys/gpio.h>
|
|
|
|
|
#include <sys/ioctl.h>
|
|
|
|
|
#include <dev/gpio/gpiovar.h>
|
|
|
|
|
|
|
|
|
|
struct mainbus_attach_args {
|
|
|
|
|
const char *ma_name; /* name of device */
|
|
|
|
|
bus_dma_tag_t ma_dmat;
|
|
|
|
|
bus_space_tag_t ma_obiot;
|
|
|
|
|
bus_space_handle_t ma_gpioh;
|
|
|
|
|
void *ma_gpio;
|
|
|
|
|
int ma_gpio_offset;
|
|
|
|
|
uint32_t ma_gpio_mask;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct mainbus_softc {
|
2011-02-20 10:48:33 +03:00
|
|
|
device_t sc_dev;
|
Add a port to the Infineon ADM5120.
Basics: the ADM5120 is a 175 MHz MIPS32 4Kc processor featuring a
6-port ethernet 10/100 switch with Auto MDI/X, a PCI controller,
USB 1.1 controller, UART, watchdog timer, eight GPIO pins, and a
multiport memory controller with both NOR and NAND flash support.
This code supports most of the devices on the ADM5120, including
the 6-port switch (each port attaches as an ethernet, admsw0 through
admsw5), the PCI controller, USB controller, GPIO, watchdog, and
UART.
Remaining work: the port includes no NOR/NAND flash drivers. No
bootloader is included. I have only tested the PCI bus driver with
the use of one PCI slot on the RouterBOARD 153. It is not possible
to exploit the capabilities of the ethernet switch using bridge(4).
I have only netbooted the ADM5120 on the RB153. Booting other
boards, and booting from flash memory, remains to be done.
Hardware availability: many low-cost routers, including the
RouterBOARD 100 series at RouterBOARD.com, use the Infineon ADM5120
processor.
Credits: Ruslan Ermilov and Vsevolod Lobko ported to the ADM5120,
and they wrote device drivers for the UART, USB controller, and
10/100 switch. Matt Isaacs brought the port up-to-date with
NetBSD-current, made it compile, and ran it first on the RB153.
I added drivers for the PCI controller, GPIO, and watchdog timer.
I produced the bus attachment for the CompactFlash slot with advice
from Mikrotik technical support and from Matt Thomas.
2007-03-20 11:52:00 +03:00
|
|
|
bus_space_tag_t sc_obiot;
|
|
|
|
|
bus_space_handle_t sc_gpioh;
|
|
|
|
|
struct gpio_chipset_tag sc_gp;
|
|
|
|
|
gpio_pin_t sc_pins[8];
|
|
|
|
|
device_t sc_gpio;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
device_t admgpio_attach(struct mainbus_softc *);
|
|
|
|
|
|
|
|
|
|
#endif /* _ADM5120_MAINBUSVAR_H_ */
|