NetBSD/sys/arch/arc/TODO

198 lines
5.7 KiB
Plaintext
Raw Normal View History

2000-06-17 13:18:39 +04:00
$NetBSD: TODO,v 1.13 2000/06/17 09:18:39 soda Exp $
To do list (not in any particular order).
o XXX at least 2000/06/07 version is already quite unstable
on PICA and NEC Image RISCstation. (but almost OK on Magnum)
Userland commands dumps core randomly.
This version is before _MIPS_PADDR_T_64BIT changes
and MIPS3_TLB_WIRED_UPAGES changes.
o XXX sudden hang up in a few minutes or dozens of minutes.
2000 Mar 17 -current is OK. Mar 29 is NG.
o Move the RO and WIRED attribute from the pte to the pv table.
This saves four instructions in the tlb miss handler.
2000-06-09 09:06:25 +04:00
o Boot. Standalone boot program instead of booting the kernel directly.
o Find out why bitmap load to S3-928 flashes screen. (X server)
Know why (enable linear mode). Need S3 info.
o Can we have 32 double registers?
o 64bit kernel/userland
2000-06-09 09:06:25 +04:00
o NEC RISCstation 2200 support
2000-06-09 09:06:25 +04:00
- framebuffer?
2000-06-09 09:06:25 +04:00
- interrupt handling?
o repair DeskStation support
- requires bounce buffer bus_dma for Tyne
- set up rPC44 wired TLB entries explicitly
o repair Algor support
- pci/pbcpcibus.c:vtophysaddr(): pbc_version < V96X_VREV_C0 case
o sysinst
o install notes
o www: diskless HOW-TO port-arc specific part.
o Xserver
- VXL magnum, some RISCserver 2200
- vga/S3 pica, Image RISCstation - OpenBSD's?
- vga/cirrus some RISCserver 2200
- vga/??? DESKstation Tyne, rPC44
- TGA RISCserver 2250
o X clients
probably pmax binary is good enough.
o source code structure is quite obsolete,
general clean up is needed as nisimura-san suggested.
especially:
- introduce struct platform and remove ugly ``switch (cputype)''
in many places.
- redesign interrupt handler framework to be flexible for
possible variations; must be sane and useful for R4030/R4230
'local' devices and any combinations with ISA/EISA/PCI
2000-06-09 09:06:25 +04:00
- remove inb/outb
- try to interporate HZ; may be possible for R4030/R4230 system
or 'hardclock() by R4000' system. Clock resolution of 100Hz
without any interporation is substandard
2000-06-17 13:18:39 +04:00
- remove UADDR
o overblocking on interrupt handler, and related problems
- SR_INT_IE should be enabled before calling hardclock().
Since this is not done currently, spllowersoftclock()
on hardclock() doesn't have effect, and softclock() is
handled with all interrupt disabled in this case.
-> overblocking, possibly causes missing hardclock()
- MIPS3_CLKF_BASEPRI() doesn't work correctly,
when MIPS_INT_MASK_5 (== MIPS_INT_MASK_CLOCK) is disabled.
-> micro optimization on hardclock() doesn't work.
but currently this may make hardclock() latency better
due to above SR_INT_IE problem.
s/MIPS_INT_MASK/MIPS3_INT_MASK/ makes this work, although tricky.
- if (ipending & INT_MASK_REAL_DEV) == 0,
softnet() and softclock() are handled with all interrupt disabled.
-> overblocking, possibly causes missing hardclock()
- softclock() is handled with softnet() disabled.
-> slightly overblocking
- `netisr' handling in netintr() implies potential race condition.
`netisr' access should be protected by splnet().
currently this is not real problem due to above overblocking.
`ssir' handling on many mips ports has same problem.
It should be protected by splnet() or splserial() or splhigh()
(depends on the highest interrupt level which sets `ssir').
Since `ssir' is accessed not only by setsoftnet() but also
by setsoft(), setsoftnet() should protect `ssir' by splserial()
or something. (i.e. priority level which setsoft() will be called)
Probably, it is better to split `ssir' variable for each
priority level.
also, _clearsoftintr() should be called before `ssir' access.
currently this is not real problem due to above overblocking.
- INT_MASK_REAL_DEV should be removed
2000-06-09 09:06:25 +04:00
- make CLKF_INTR() work.
- major rework, possibly by software emulated spl.
splserial()/splsoftserial()
o it is better to always disable MIPS_INT_MASK_CLOCK.
those are the points which should be fixed:
mips_idle: li t0, (MIPS_INT_MASK | MIPS_SR_INT_IE)
machdep.c: curpcb->pcb_context[11] = MIPS_INT_MASK | MIPS_SR_INT_IE;
spl0()
splnone()
- MIPS_INT_MASK_CLOCK should be removed in someway
o fix kernel start address
2000-06-09 09:06:25 +04:00
o allocate PICA_TL_BASE and SONICBUF dynamically
o merge new wscons
2000-06-09 09:06:25 +04:00
o fix mem_clusters[] usage.
o test and merge soren's clean up about proc0.p_addr.
o parse ARC BIOS configuration information and use it
o omit __BROKEN_CONFIG_UNIT_USAGE
o omit __SWAP_BROKEN in <mips/types.h>
o fix implementation of DELAY(), clean up clock implementation
2000-06-09 09:06:25 +04:00
o increase MAXPHYS to 64KB
o asc.c scsi clock/NCR53CF94 handling clean up
2000-06-09 09:06:25 +04:00
o if_sn.c
- ether address handling clean up
- bus_dma'fy
- bus_space'fy
- split frontend and backend
- make this MI, and share with mac68k, newsmips/apbus
o com_lbus.c clock handling clean up
2000-06-09 09:06:25 +04:00
o intrcnt[] name cleanup
2000-06-17 13:18:39 +04:00
o implement NCR 53c700(?) driver for NEC RISCserver 2200,
RISCstation 2200 and RISCstation 2250.
based on MI siop driver?
2000-03-03 15:32:15 +03:00
o audio driver
o use MI driver
- use MI ncr53c9x driver instead of home grown asc
- use MI bha driver instead of home grown btl
- make fd driver MI, and share it with i386
(contact christos about MI fd driver)
- make pccons MI, and share it with i386,
or simply eliminate pccons
2000-03-03 15:32:15 +03:00
- LKM
2000-03-03 15:32:15 +03:00
o ARC boot device name -> NetBSD root device conversion
2000-03-03 15:32:15 +03:00
o and missing MI devices
ses?, lkm, vcoda, ...
2000-06-09 09:06:25 +04:00
o bus_dmamap_sync: Hit_Invalidate and Hit_Write_Back cache operation
o clean up ALEAF/NLEAF/NON_LEAF/NNON_LEAF in userland.
o resolve "XXX"
Lots of other things.....