NetBSD/sys/arch/prep/conf/INSTALL

#	$NetBSD: INSTALL,v 1.25 2003/10/18 08:30:14 lukem Exp $
#
#	INSTALL -- Installation kernel
#

include "arch/prep/conf/std.prep"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

makeoptions	COPTS="-Os -mmultiple"	# -Os -mmultiple to reduce size.

# Enable the hooks used for initializing the ram-disk.
options 	MEMORY_DISK_HOOKS
options 	MEMORY_DISK_IS_ROOT	# Force root on ram-disk
options 	MEMORY_DISK_ROOT_SIZE=4096	# 2 Megabytes

maxusers	8

# Platform support
options 	PLATFORM_IBM_6040		# IBM ThinkPad 820
options 	PLATFORM_IBM_6050		# IBM Personal Power Series 830
options 	PLATFORM_IBM_7248		# IBM RS/6000 7248-100/120/133
options 	PLATFORM_IBM_7043_140		# IBM RS/6000 43P 7043-140
options 	PLATFORM_MOTOROLA_ULMB60XA	# Motorola ULMB60xA (?)

options 	OPENPIC				# OpenPIC support (7043-140)

# Compatibility options
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_15	# NetBSD 1.5,
options 	COMPAT_43	# and 4.3BSD

# File systems
file-system 	FFS		# UFS
file-system	EXT2FS		# second extended file system (linux)
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system

# File system options
options 	VNODE_OP_NOINLINE	# Not inlining vnode op calls saves mem
#options 	FFS_EI		# FFS Endian Independant support
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
 				# immutable) behave as system flags.

options 	USERCONF	# userconf(4) support
options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
options 	MALLOC_NOINLINE		# Not inlining MALLOC saves memory

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	NFS_BOOT_BOOTPARAM
options 	NFS_BOOT_DHCP

#
# wscons options
#
# builtin terminal emulations
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR

# Kernel root file system and dump configuration.
config	netbsd	root on ? type ?


#
# Device configuration
#

mainbus0 at root
cpu0	at mainbus0


# Basic Bus Support

# PCI bus support
pci0	at mainbus0 bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

options 	PCI_NETBSD_CONFIGURE

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges

# ISA bus support
isa*	at pcib?			# ISA on PCI-ISA bridge

# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?

# ISA PCMCIA controllers
pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000

#options 	PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14
#options 	PCIC_ISA_ALLOC_IOBASE=0x0400
#options 	PCIC_ISA_ALLOC_IOSIZE=0x0100

# ISA Plug-and-Play bus support
isapnp0 at isa?

# on-board I/O for IBM Personal Power Series 830 IDE controller
obio0	at mainbus0


# Console Devices

# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
vga*		at pci?
wsdisplay*	at vga? console ?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0

pcppi0	at isa?				# PC prog. periph. interface
isabeep0 at pcppi?			# "keyboard" beep

mcclock0 at isa? port 0x70		# mc146818 and compatible
mkclock0 at isa? port 0x74		# mk48t18 and compatible


# Serial Devices

# ISA serial interfaces
com0	at isa? port 0x3f8 irq 4	# standard PC serial ports
com1	at isa? port 0x2f8 irq 3

# Parallel Printer Interfaces

# ISA parallel printer interfaces
lpt0	at isa? port 0x3bc irq 7	# standard PC parallel ports


# SCSI Controllers and Devices

# PCI SCSI controllers
adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
esiop*	at pci? dev ? function ?	# Symbios 53c825/875 and newer chips
iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI

# PCMCIA SCSI controllers
aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI

# SCSI bus support
scsibus* at adw?
scsibus* at ahc?
scsibus* at aic?
scsibus* at esiop?
scsibus* at iha?
scsibus* at pcscp?
scsibus* at siop?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives


# IDE and related devices

# IBM Personal Power Series 830 IDE controller
wdc0	at obio? port 0x1f0 irq 13
wdc1	at obio? port 0x170 irq 13

# ISA Plug-and-Play IDE controllers
wdc*	at isapnp?

# PCMCIA IDE controllers
wdc*	at pcmcia? function ?

# ATA (IDE) bus support
atabus* at ata?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at atabus? drive ? flags 0x0000

# ATAPI bus support
atapibus* at atapi?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives

# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
fd*	at fdc? drive ?

# Network Interfaces

# PCI network interfaces
ep*	at pci? dev ? function ?	# 3Com 3c59x
ex*	at pci? dev ? function ?	# 3Com 3c90x[BC]
fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
pcn*	at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
rtk*	at pci? dev ? function ?	# Realtek 8129/8139
sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
tlp*	at pci? dev ? function ?	# DECchip 21x4x and clones
vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet

# ISA network interfaces
ep*	at isa? port ? irq ?		# 3Com 3c509 Ethernet

# ISA Plug-and-Play network intefaces
ep*	at isapnp?			# 3Com 3c509 Ethernet
ne*	at isapnp?			# NE2000-compatible Ethernet

# PCMCIA network interfaces
ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet

# MII/PHY support
exphy*	at mii? phy ?			# 3Com internal PHYs
inphy*	at mii? phy ?			# Intel 82555 PHYs
nsphy*	at mii? phy ?			# NS83840 PHYs
qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs


# Pseudo-Devices

# disk/mass storage pseudo-devices
pseudo-device	md		1	# memory disk device (ramdisk)

# network pseudo-devices
pseudo-device	loop			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?' Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?' 2003-10-18 12:30:12 +04:00			`# $NetBSD: INSTALL,v 1.25 2003/10/18 08:30:14 lukem Exp $`
Add prep installer 2001-01-16 19:53:57 +03:00			`#`
			`# INSTALL -- Installation kernel`
			`#`

			`include "arch/prep/conf/std.prep"`

Add the INCLUDE_CONFIG_FILE option to all config files. In config files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or ALPHA), it is uncommented. 2002-04-25 19:06:20 +04:00			`#options INCLUDE_CONFIG_FILE # embed config file in kernel binary`

Add prep installer 2001-01-16 19:53:57 +03:00			`makeoptions COPTS="-Os -mmultiple" # -Os -mmultiple to reduce size.`

			`# Enable the hooks used for initializing the ram-disk.`
			`options MEMORY_DISK_HOOKS`
			`options MEMORY_DISK_IS_ROOT # Force root on ram-disk`
Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE, which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as being more consistent with what it's controlling... 2002-04-02 09:30:34 +04:00			`options MEMORY_DISK_ROOT_SIZE=4096 # 2 Megabytes`
Add prep installer 2001-01-16 19:53:57 +03:00
			`maxusers 8`

Use PLATFORM_* 2002-05-02 18:58:36 +04:00			`# Platform support`
Add PLATFORM_IBM_6040 2003-01-16 09:59:19 +03:00			`options PLATFORM_IBM_6040 # IBM ThinkPad 820`
Use PLATFORM_* 2002-05-02 18:58:36 +04:00			`options PLATFORM_IBM_6050 # IBM Personal Power Series 830`
			`options PLATFORM_IBM_7248 # IBM RS/6000 7248-100/120/133`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`options PLATFORM_IBM_7043_140 # IBM RS/6000 43P 7043-140`
Use PLATFORM_* 2002-05-02 18:58:36 +04:00			`options PLATFORM_MOTOROLA_ULMB60XA # Motorola ULMB60xA (?)`

Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`options OPENPIC # OpenPIC support (7043-140)`

Add prep installer 2001-01-16 19:53:57 +03:00			`# Compatibility options`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`options COMPAT_13 # NetBSD 1.3,`
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`options COMPAT_14 # NetBSD 1.4,`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`options COMPAT_15 # NetBSD 1.5,`
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`options COMPAT_43 # and 4.3BSD`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# File systems`
			`file-system FFS # UFS`
			`file-system EXT2FS # second extended file system (linux)`
			`file-system MFS # memory file system`
			`file-system NFS # Network File System client`
			`file-system CD9660 # ISO 9660 + Rock Ridge file system`
			`file-system MSDOSFS # MS-DOS file system`

			`# File system options`
Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR, MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they include another config files that already defines the options, or if they are for an embedded board, just define a few extra options, and do not already define PIPE_SOCKETPAIR. 2002-07-05 17:40:10 +04:00			`options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem`
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`#options FFS_EI # FFS Endian Independant support`
Add prep installer 2001-01-16 19:53:57 +03:00			`#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and`
			`# immutable) behave as system flags.`

enable USERCONF by default; it's small and extremely useful to have available. 2002-09-18 06:43:53 +04:00			`options USERCONF # userconf(4) support`
Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR, MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they include another config files that already defines the options, or if they are for an embedded board, just define a few extra options, and do not already define PIPE_SOCKETPAIR. 2002-07-05 17:40:10 +04:00			`options PIPE_SOCKETPAIR # smaller, but slower pipe(2)`
			`options MALLOC_NOINLINE # Not inlining MALLOC saves memory`
add options PIPE_SOCKETPAIR to individual kernel configs the option is commented out on everything but kernels I was able to recognize as INSTALL-like or ones for small memory machines 2002-01-27 16:23:08 +03:00
Add prep installer 2001-01-16 19:53:57 +03:00			`# Networking options`
			`options INET # IP + ICMP + TCP + UDP`
			`options NFS_BOOT_BOOTPARAM`
			`options NFS_BOOT_DHCP`

prep has no special dependencies on pccons; remove. 2001-11-22 01:40:45 +03:00			`#`
			`# wscons options`
			`#`
			`# builtin terminal emulations`
			`options WSEMUL_VT100 # VT100 / VT220 emulation`
			`# different kernel output - see dev/wscons/wsdisplayvar.h`
			`options WS_KERNEL_FG=WSCOL_GREEN`
			`#options WS_KERNEL_BG=WSCOL_BLACK`
			`# see dev/pckbc/wskbdmap_mfii.c for implemented layouts`
			`#options PCKBD_LAYOUT="(KB_DE \| KB_NODEAD)"`
			`# allocate a number of virtual screens at autoconfiguration time`
			`#options WSDISPLAY_DEFAULTSCREENS=4`
			`# use a large software cursor that doesn't blink`
			`options PCDISPLAY_SOFTCURSOR`

Add prep installer 2001-01-16 19:53:57 +03:00			`# Kernel root file system and dump configuration.`
			`config netbsd root on ? type ?`


			`#`
			`# Device configuration`
			`#`

			`mainbus0 at root`
			`cpu0 at mainbus0`


			`# Basic Bus Support`

			`# PCI bus support`
			`pci0 at mainbus0 bus ?`
			`pci* at pchb? bus ?`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`pci* at ppb? bus ?`
Add prep installer 2001-01-16 19:53:57 +03:00
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`options PCI_NETBSD_CONFIGURE`

Add prep installer 2001-01-16 19:53:57 +03:00			`# PCI bridges`
			`pchb* at pci? dev ? function ? # PCI-Host bridges`
			`pcib* at pci? dev ? function ? # PCI-ISA bridges`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`ppb* at pci? dev ? function ? # PCI-PCI bridges`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# ISA bus support`
			`isa* at pcib? # ISA on PCI-ISA bridge`

			`# PCMCIA bus support`
			`pcmcia* at pcic? controller ? socket ?`

			`# ISA PCMCIA controllers`
			`pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000`

			`#options PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14`
			`#options PCIC_ISA_ALLOC_IOBASE=0x0400`
			`#options PCIC_ISA_ALLOC_IOSIZE=0x0100`

			`# ISA Plug-and-Play bus support`
			`isapnp0 at isa?`

Added IBM Personal Power Series 830 IDE controller support. 2002-05-02 19:17:56 +04:00			`# on-board I/O for IBM Personal Power Series 830 IDE controller`
			`obio0 at mainbus0`


Add prep installer 2001-01-16 19:53:57 +03:00			`# Console Devices`

prep has no special dependencies on pccons; remove. 2001-11-22 01:40:45 +03:00			`# wscons`
			`pckbc0 at isa? # pc keyboard controller`
			`pckbd* at pckbc? # PC keyboard`
			`pms* at pckbc? # PS/2 mouse for wsmouse`
			`vga* at pci?`
			`wsdisplay* at vga? console ?`
			`wskbd* at pckbd? console ?`
			`wsmouse* at pms? mux 0`

			`pcppi0 at isa? # PC prog. periph. interface`
			`isabeep0 at pcppi? # "keyboard" beep`
Add prep installer 2001-01-16 19:53:57 +03:00
			`mcclock0 at isa? port 0x70 # mc146818 and compatible`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`mkclock0 at isa? port 0x74 # mk48t18 and compatible`
Add prep installer 2001-01-16 19:53:57 +03:00

			`# Serial Devices`

			`# ISA serial interfaces`
			`com0 at isa? port 0x3f8 irq 4 # standard PC serial ports`
			`com1 at isa? port 0x2f8 irq 3`

			`# Parallel Printer Interfaces`

			`# ISA parallel printer interfaces`
			`lpt0 at isa? port 0x3bc irq 7 # standard PC parallel ports`


			`# SCSI Controllers and Devices`

			`# PCI SCSI controllers`
Add adw 2001-08-29 21:37:47 +04:00			`adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`esiop* at pci? dev ? function ? # Symbios 53c825/875 and newer chips`
Add iha(4), which works as well on my 7248. 2001-06-23 07:09:20 +04:00			`iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI`
Add prep installer 2001-01-16 19:53:57 +03:00			`pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI`
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`siop* at pci? dev ? function ? # Symbios 53c8xx SCSI`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# PCMCIA SCSI controllers`
			`aic* at pcmcia? function ? # Adaptec APA-1460 SCSI`

			`# SCSI bus support`
Add adw 2001-08-29 21:37:47 +04:00			`scsibus* at adw?`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`scsibus* at ahc?`
Add prep installer 2001-01-16 19:53:57 +03:00			`scsibus* at aic?`
Support IBM RS/6000 43P 7043-140. 2002-05-30 20:10:03 +04:00			`scsibus* at esiop?`
Add iha(4), which works as well on my 7248. 2001-06-23 07:09:20 +04:00			`scsibus* at iha?`
Add prep installer 2001-01-16 19:53:57 +03:00			`scsibus* at pcscp?`
- Add "siop at pci" and related line. - Add "options PCI_NETBSD_CONFIGURE". 2001-06-20 18:37:46 +04:00			`scsibus* at siop?`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# SCSI devices`
			`sd* at scsibus? target ? lun ? # SCSI disk drives`
			`st* at scsibus? target ? lun ? # SCSI tape drives`
			`cd* at scsibus? target ? lun ? # SCSI CD-ROM drives`


			`# IDE and related devices`

Added IBM Personal Power Series 830 IDE controller support. 2002-05-02 19:17:56 +04:00			`# IBM Personal Power Series 830 IDE controller`
			`wdc0 at obio? port 0x1f0 irq 13`
			`wdc1 at obio? port 0x170 irq 13`

			`# ISA Plug-and-Play IDE controllers`
			`wdc* at isapnp?`

Add prep installer 2001-01-16 19:53:57 +03:00			`# PCMCIA IDE controllers`
			`wdc* at pcmcia? function ?`

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?' Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?' 2003-10-18 12:30:12 +04:00			`# ATA (IDE) bus support`
			`atabus* at ata?`
Add atabus. 2003-10-08 15:14:36 +04:00
Add prep installer 2001-01-16 19:53:57 +03:00			`# IDE drives`
			`# Flags are used only with controllers that support DMA operations`
			`# and mode settings (e.g. some pciide controllers)`
			`# The lowest order four bits (rightmost digit) of the flags define the PIO`
			`# mode to use, the next set of four bits the DMA mode and the third set the`
			`# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode`
			`# to use, and the last bit must be 1 for this setting to be used.`
			`# For DMA and UDMA, 0xf (1111) means 'disable'.`
			`# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.`
			`# (0xc=1100, 0xa=1010, 0xf=1111)`
			`# 0x0000 means "use whatever the drive claims to support".`
Add atabus. 2003-10-08 15:14:36 +04:00			`wd* at atabus? drive ? flags 0x0000`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# ATAPI bus support`
Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?' Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?' 2003-10-18 12:30:12 +04:00			`atapibus* at atapi?`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# ATAPI devices`
			`# flags have the same meaning as for IDE drives.`
			`cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives`
			`sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives`

			`# Miscellaneous mass storage devices`

			`# ISA floppy`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers`
Add prep installer 2001-01-16 19:53:57 +03:00			`fd* at fdc? drive ?`

			`# Network Interfaces`

			`# PCI network interfaces`
			`ep* at pci? dev ? function ? # 3Com 3c59x`
Add ex(4). 2002-04-24 13:46:15 +04:00			`ex* at pci? dev ? function ? # 3Com 3c90x[BC]`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B`
Add prep installer 2001-01-16 19:53:57 +03:00			`ne* at pci? dev ? function ? # NE2000-compatible Ethernet`
Add pcn(4), sip(4) and tlp(4). XXX epic(4) seems to have problem, while it works on macppc... 2001-09-05 15:54:43 +04:00			`pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`rtk* at pci? dev ? function ? # Realtek 8129/8139`
Add pcn(4), sip(4) and tlp(4). XXX epic(4) seems to have problem, while it works on macppc... 2001-09-05 15:54:43 +04:00			`sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet`
Switch from de to tlp by default. 2002-04-17 06:22:41 +04:00			`tlp* at pci? dev ? function ? # DECchip 21x4x and clones`
Add prep installer 2001-01-16 19:53:57 +03:00			`vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet`

Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`# ISA network interfaces`
			`ep* at isa? port ? irq ? # 3Com 3c509 Ethernet`

Add prep installer 2001-01-16 19:53:57 +03:00			`# ISA Plug-and-Play network intefaces`
			`ep* at isapnp? # 3Com 3c509 Ethernet`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`ne* at isapnp? # NE2000-compatible Ethernet`
Add prep installer 2001-01-16 19:53:57 +03:00
			`# PCMCIA network interfaces`
			`ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet`
			`ne* at pcmcia? function ? # NE2000-compatible Ethernet`

			`# MII/PHY support`
Add ex(4). 2002-04-24 13:46:15 +04:00			`exphy* at mii? phy ? # 3Com internal PHYs`
Add ahc(4), fxp(4), rtk(4) 2001-06-24 21:40:07 +04:00			`inphy* at mii? phy ? # Intel 82555 PHYs`
			`nsphy* at mii? phy ? # NS83840 PHYs`
Add pcn(4), sip(4) and tlp(4). XXX epic(4) seems to have problem, while it works on macppc... 2001-09-05 15:54:43 +04:00			`qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs`
			`sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs`
Add prep installer 2001-01-16 19:53:57 +03:00			`ukphy* at mii? phy ? # generic unknown PHYs`


			`# Pseudo-Devices`

			`# disk/mass storage pseudo-devices`
			`pseudo-device md 1 # memory disk device (ramdisk)`

			`# network pseudo-devices`
			`pseudo-device loop # network loopback`

			`# miscellaneous pseudo-devices`
			`pseudo-device pty # pseudo-terminals`
			`pseudo-device rnd # /dev/random and in-kernel generator`
cleanup: options SPACE TAB makeoptions TAB psuedo-device TAB remove trailing whitespace replace multiple spaces -> tabs options "FOO" -> options FOO options "FOO=bar" -> options FOO=bar options "FOO=\"bar\"" -> options FOO="\"bar\"" 2001-11-20 15:56:17 +03:00			`#options RND_COM # use "com" randomness as well`