Aren/NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b23af931be
NetBSD/sys/dev/scsipi/scsipi_disk.h

117 lines
3.5 KiB
C
Raw Normal View History

If READ CAPACITY fails, try a READ FORMAT CAPACITIES. Separate this into another function, always doing a page 0 MODE SENSE to get the block descriptor if we use READ CAPACITY, and use SMS_DBD on the page 4/5 MODE SENSE. This does one extra command in some cases, but it separates and simplifies the code a little. Why do we prefer READ CAPACITY over READ FORMAT CAPACITIES? Two reasons: 1) It's much older and is much less likely to have had its command code abused, and is thus "safer" to try first. 2) ALL of my USB flash readers and pen drives screw up their capacity descriptors -- mostly off-by-one errors in the size (they return the maximum LBA number instead, a la READ CAPACITY, which has *never* been how READ FORMAT CAPACITIES was documented in the MMC spec), and one returns the "no media" code on slots that have media inserted (despite returning almost-correct data otherwise)! F*** me with a chainsaw.
2003-09-18 03:33:43 +04:00
/* $NetBSD: scsipi_disk.h,v 1.9 2003/09/17 23:33:43 mycroft Exp $ */
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
/*
* SCSI and SCSI-like interfaces description
*/
/*
* Some lines of this file come from a file of the name "scsi.h"
* distributed by OSF as part of mach2.5,
* so the following disclaimer has been kept.
*
* Copyright 1990 by Open Software Foundation,
* Grenoble, FRANCE
*
* All Rights Reserved
Cosmetic changes to keep coding style consistency in this directory; - Indent with tab of width 8. - Use four column to indent continuation line. - Fold long line if possible. - Use return (xx) instead of return xx. - Compare pointer against NULL instead of testing like boolean. - Delete whitespace at the end of line. - Delete whitespace in front of function call operator. - Delete whitespace after cast. - Dereference a pointer to function explicitly. - Add an empty line after local variable declaration. - Use NULL instead of (char *)0. - Dont use block for single statement.
1997-10-01 05:18:38 +04:00
*
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
* Permission to use, copy, modify, and distribute this software and
* its documentation for any purpose and without fee is hereby granted,
* provided that the above copyright notice appears in all copies and
* that both the copyright notice and this permission notice appear in
* supporting documentation, and that the name of OSF or Open Software
* Foundation not be used in advertising or publicity pertaining to
* distribution of the software without specific, written prior
* permission.
Cosmetic changes to keep coding style consistency in this directory; - Indent with tab of width 8. - Use four column to indent continuation line. - Fold long line if possible. - Use return (xx) instead of return xx. - Compare pointer against NULL instead of testing like boolean. - Delete whitespace at the end of line. - Delete whitespace in front of function call operator. - Delete whitespace after cast. - Dereference a pointer to function explicitly. - Add an empty line after local variable declaration. - Use NULL instead of (char *)0. - Dont use block for single statement.
1997-10-01 05:18:38 +04:00
*
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
* OSF DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS,
* IN NO EVENT SHALL OSF BE LIABLE FOR ANY SPECIAL, INDIRECT, OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
* LOSS OF USE, DATA OR PROFITS, WHETHER IN ACTION OF CONTRACT,
* NEGLIGENCE, OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION
* WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*
* Largely written by Julian Elischer (julian@tfs.com)
* for TRW Financial Systems.
*
* TRW Financial Systems, in accordance with their agreement with Carnegie
* Mellon University, makes this software available to CMU to distribute
Cosmetic changes to keep coding style consistency in this directory; - Indent with tab of width 8. - Use four column to indent continuation line. - Fold long line if possible. - Use return (xx) instead of return xx. - Compare pointer against NULL instead of testing like boolean. - Delete whitespace at the end of line. - Delete whitespace in front of function call operator. - Delete whitespace after cast. - Dereference a pointer to function explicitly. - Add an empty line after local variable declaration. - Use NULL instead of (char *)0. - Dont use block for single statement.
1997-10-01 05:18:38 +04:00
* or use in any manner that they see fit as long as this message is kept with
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
* the software. For this reason TFS also grants any other persons or
* organisations permission to use or modify this software.
*
* TFS supplies this software to be publicly redistributed
* on the understanding that TFS is not responsible for the correct
* functioning of this software in any circumstances.
*
* Ported to run under 386BSD by Julian Elischer (julian@tfs.com) Sept 1992
*/
Add multiple inclusion protection.
2003-01-07 00:02:18 +03:00
#ifndef _DEV_SCSIPI_SCSIPI_DISK_H_
#define _DEV_SCSIPI_SCSIPI_DISK_H_
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
/*
* SCSI command format
*/
#define READ_BIG 0x28
#define WRITE_BIG 0x2a
struct scsipi_rw_big {
u_int8_t opcode;
u_int8_t byte2;
#define SRWB_RELADDR 0x01
Add the Force Unit Access and Disable Page Out bits to the READ(10) and WRITE(10) commands.
2001-09-03 00:17:04 +04:00
#define SRWB_FUA 0x08 /* force unit access */
#define SRWB_DPO 0x10 /* disable page out */
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
u_int8_t addr[4];
u_int8_t reserved;
u_int8_t length[2];
u_int8_t control;
If READ CAPACITY fails, try a READ FORMAT CAPACITIES. Separate this into another function, always doing a page 0 MODE SENSE to get the block descriptor if we use READ CAPACITY, and use SMS_DBD on the page 4/5 MODE SENSE. This does one extra command in some cases, but it separates and simplifies the code a little. Why do we prefer READ CAPACITY over READ FORMAT CAPACITIES? Two reasons: 1) It's much older and is much less likely to have had its command code abused, and is thus "safer" to try first. 2) ALL of my USB flash readers and pen drives screw up their capacity descriptors -- mostly off-by-one errors in the size (they return the maximum LBA number instead, a la READ CAPACITY, which has *never* been how READ FORMAT CAPACITIES was documented in the MMC spec), and one returns the "no media" code on slots that have media inserted (despite returning almost-correct data otherwise)! F*** me with a chainsaw.
2003-09-18 03:33:43 +04:00
} __attribute__((packed));
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
#define READ_CAPACITY 0x25
struct scsipi_read_capacity {
u_int8_t opcode;
u_int8_t byte2;
u_int8_t addr[4];
u_int8_t unused[3];
u_int8_t control;
If READ CAPACITY fails, try a READ FORMAT CAPACITIES. Separate this into another function, always doing a page 0 MODE SENSE to get the block descriptor if we use READ CAPACITY, and use SMS_DBD on the page 4/5 MODE SENSE. This does one extra command in some cases, but it separates and simplifies the code a little. Why do we prefer READ CAPACITY over READ FORMAT CAPACITIES? Two reasons: 1) It's much older and is much less likely to have had its command code abused, and is thus "safer" to try first. 2) ALL of my USB flash readers and pen drives screw up their capacity descriptors -- mostly off-by-one errors in the size (they return the maximum LBA number instead, a la READ CAPACITY, which has *never* been how READ FORMAT CAPACITIES was documented in the MMC spec), and one returns the "no media" code on slots that have media inserted (despite returning almost-correct data otherwise)! F*** me with a chainsaw.
2003-09-18 03:33:43 +04:00
} __attribute__((packed));
Merge scsipi branch in the mainline. This add support for ATAPI devices (currently only CD-ROM drives on i386). The sys/dev/scsipi system provides 2 busses to which devices can attach (scsibus and atapibus). This needed to change some include files and structure names in the low level scsi drivers.
1997-08-27 15:22:52 +04:00
/* DATAs definitions for the above commands */
struct scsipi_read_cap_data {
u_int8_t addr[4];
u_int8_t length[4];
If READ CAPACITY fails, try a READ FORMAT CAPACITIES. Separate this into another function, always doing a page 0 MODE SENSE to get the block descriptor if we use READ CAPACITY, and use SMS_DBD on the page 4/5 MODE SENSE. This does one extra command in some cases, but it separates and simplifies the code a little. Why do we prefer READ CAPACITY over READ FORMAT CAPACITIES? Two reasons: 1) It's much older and is much less likely to have had its command code abused, and is thus "safer" to try first. 2) ALL of my USB flash readers and pen drives screw up their capacity descriptors -- mostly off-by-one errors in the size (they return the maximum LBA number instead, a la READ CAPACITY, which has *never* been how READ FORMAT CAPACITIES was documented in the MMC spec), and one returns the "no media" code on slots that have media inserted (despite returning almost-correct data otherwise)! F*** me with a chainsaw.
2003-09-18 03:33:43 +04:00
} __attribute__((packed));
#define READ_FORMAT_CAPACITIES 0x23
struct scsipi_read_format_capacities {
u_int8_t opcode;
u_int8_t byte2;
u_int8_t reserved1[5];
u_int8_t length[2];
u_int8_t reserved2[3];
} __attribute__((packed));
struct scsipi_capacity_list_header {
u_int8_t reserved[3];
u_int8_t length;
} __attribute__((packed));
struct scsipi_capacity_descriptor {
u_int8_t nblks[4];
u_int8_t byte5;
u_int8_t blklen[3];
} __attribute__((packed));
/* codes only valid in the current/maximum capacity descriptor */
#define SCSIPI_CAP_DESC_CODE_MASK 0x3
#define SCSIPI_CAP_DESC_CODE_RESERVED 0x0
#define SCSIPI_CAP_DESC_CODE_UNFORMATTED 0x1
#define SCSIPI_CAP_DESC_CODE_FORMATTED 0x2
#define SCSIPI_CAP_DESC_CODE_NONE 0x3
Add multiple inclusion protection.
2003-01-07 00:02:18 +03:00
#endif /* _DEV_SCSIPI_SCSIPI_DISK_H_ */
Reference in New Issue Copy Permalink