NetBSD/sys/arch/sun2/dev/if_ecreg.h

116 lines
4.7 KiB
C
Raw Normal View History

/* $NetBSD: if_ecreg.h,v 1.3 2001/08/17 20:27:12 fredette Exp $ */
/*
* Copyright (c) 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Matthew Fredette.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* 3Com Ethernet controller registers.
*/
#define EC_BUF_SZ 2048
#if __for_reference_only__
struct ec_regs {
u_int16_t ec_csr; /* control/status register */
u_int16_t ec_backoff; /* backoff seed */
u_int8_t ec_pad1[0x400 - (2 * sizeof(u_int16_t))];
struct ether_addr ec_arom; /* address ROM */
u_int8_t ec_pad2[0x200 - sizeof(struct ether_addr)];
struct ether_addr ec_aram; /* address RAM */
u_int8_t ec_pad3[0x200 - sizeof(struct ether_addr)];
u_int8_t ec_tbuf[EC_BUF_SZ]; /* transmit buffer */
u_int8_t ec_abuf[EC_BUF_SZ]; /* receive buffer A */
u_int8_t ec_bbuf[EC_BUF_SZ]; /* receive buffer B */
};
#endif
/* Register offsets. */
#define ECREG_CSR (0)
#define ECREG_BACKOFF (2)
#define ECREG_AROM (1024)
#define ECREG_ARAM (1536)
#define ECREG_TBUF (2048)
#define ECREG_ABUF (ECREG_TBUF + EC_BUF_SZ)
#define ECREG_BBUF (ECREG_ABUF + EC_BUF_SZ)
#define ECREG_BANK_SZ (ECREG_BBUF + EC_BUF_SZ)
/*
* Control/status register bits
*/
#define EC_CSR_BBSW 0x8000 /* B buffer empty (belongs to card) */
#define EC_CSR_ABSW 0x4000 /* A buffer empty (belongs to card) */
#define EC_CSR_TBSW 0x2000 /* T buffer full (belongs to card) */
#define EC_CSR_JAM 0x1000 /* Ethernet jammed (collision) */
#define EC_CSR_AMSW 0x0800 /* address RAM belongs to ether */
#define EC_CSR_RBBA 0x0400 /* B buffer received before A */
#define EC_CSR_RESET 0x0100 /* reset the card */
#define EC_CSR_BINT 0x0080 /* B buffer interrupt enable */
#define EC_CSR_AINT 0x0040 /* A buffer interrupt enable */
#define EC_CSR_TINT 0x0020 /* T buffer interrupt enable */
#define EC_CSR_JINT 0x0010 /* jam interrupt enable */
#define EC_CSR_INTPA 0x00ff /* mask for interrupt and PA fields */
#define EC_CSR_PAMASK 0x000f /* PA field */
#define EC_CSR_PA 0x0007 /* receive mine+broadcast-errors */
#define EC_CSR_PROMISC 0x0001 /* receive all-errors */
/*
* Turns an EC_CSR_xINT value into an ECREG_xBUF value.
* NB: does not work with EC_CSR_TINT.
*/
#define EC_CSR_INT_BUF(x) (((x) << 5) + 2048)
/*
* Turns an EC_CSR_xINT value into an ECREG_xBSW value.
*/
#define EC_CSR_INT_BSW(x) ((x) << 8)
/*
* Receive status bits. The first 16 bits of a receive
* buffer are a status word.
*/
#define EC_PKT_FCSERR 0x8000 /* FCS error */
#define EC_PKT_BROADCAST 0x4000 /* packet was broadcast */
#define EC_PKT_RGERR 0x2000 /* range error */
#define EC_PKT_ADDRMATCH 0x1000 /* address match */
#define EC_PKT_FRERR 0x0800 /* framing error */
#define EC_PKT_DOFF 0x07ff /* first free byte */
#define EC_PKT_MAXTDOFF (EC_BUF_SZ - (ETHER_MIN_LEN - ETHER_CRC_LEN)) /* max xmit doff (min size) */
#define EC_PKT_RDOFF 2 /* packet offset in buffer */
#define EC_PKT_MINRDOFF (EC_PKT_RDOFF + (ETHER_MIN_LEN - ETHER_CRC_LEN)) /* min packet doff (min size) */
#define EC_PKT_MAXRDOFF (EC_BUF_SZ - EC_PKT_RDOFF) /* max packet doff (max size) */