NetBSD/sys/arch/amiga/conf/GENERIC

#
# GENERIC AMIGA
#
#	$Id: GENERIC,v 1.15 1994/06/05 07:43:35 chopps Exp $
#
# This configuration file contains all possible options
#

include "std.amiga"

maxusers	8
options		TIMEZONE=300, DST=1

#
# processors this kernel should support
#
options		"M68040"	# support for 040
options		FPSP		# MC68040 floating point support
options		"M68030"	# support for 030
options		"M68020"	# support for 020/851
options		FPCOPROC	# Support for MC6888[12] (Required)

options		SWAPPAGER	# Pager for processes (Required)
options		VNODEPAGER	# Pager for vnodes (Required)
options		DEVPAGER	# Pager for devices (Required)

#
# Networking options
#
options		ETHER		# XXXX!!!!
options		INET		# IP networking support (Required)
options		ISO		# ISO Networking support
options		TPIP		# ARGO TP networking support
#options	CCITT		# CCITT X.25
#options	NS		# Xerox XNS
#options	EON		# ISO CLNL over IP
#options	GATEWAY		# Packet forwarding
#options	DIRECTED_BROADCAST	# Broadcast across subnets
#options	NSIP		# XNS over IP

#
# File system related options
#
options		QUOTA		# Disk quotas for local disks
options		NFSSERVER	# Network File System server side code
options		NFSCLIENT	# Network File System client side code

#
# File systems
#
options		FFS		# Berkeley fast file system
options		MFS		# Memory based filesystem
options		PROCFS		# Process filesystem
options		KERNFS		# Kernel parameter filesystem (Recommended)
options		MSDOSFS		# MS-DOS filesystem
options		FDESC		# /dev/fd filesystem
options		LOFS		# Loopback filesystem
options		ISOFS		# ISO 9660 file system, with Rock Ridge
options		PORTAL		# Portal filesystem
options		FIFO		# FIFO operations on vnodes (Recommended)
options		ADOSFS		# AmigaDOS file system


#
# Compatability options for various existing systems
#
options		"COMPAT_09"	# compatability with older NetBSD release
options		"COMPAT_43"	# 4.3 BSD compatible system calls
options		COMPAT_SUNOS	# Support to run Sun (m68k) executables
#options	COMPAT_HPUX	# HP300 compatability
options		"TCP_COMPAT_42"	# Use 4.2 BSD style TCP
options		"COMPAT_NOMID"	# allow nonvalid machine id executables

#
# Support for System V IPC facilities.
#
options		SYSVSHM		# System V-like shared memory
options		SYSVMSG		# System V-like messages
options		SYSVSEM		# System V-like semaphores

#
# Amiga graphics options (for grfcc)
#
options		GRF_ECS		# Enhanced Chip Set
options		GRF_NTSC	# NTSC
options		GRF_PAL		# PAL
options		"GRF_A2024"	# Support for the A2024

#
# Support for various kernel options
#
options		GENERIC		# Mini-root boot support
options		LKM		# Loadable kernel modules
options		KTRACE		# Add kernel tracing system call
options		DIAGNOSTIC	# Add additional error checking code
options		"NKMEMCLUSTERS=256"	# Size of kernel malloc area
#options	PROFTIMER	# Kernel profiling support

#
# Misc. debuging options
#
options		PANICWAIT	# Require keystroke to dump/reboot
options		DEBUG		# Add debugging statements
options		DDB		# Kernel debugger
#options	SYSCALL_DEBUG	# debug all syscalls.
#options	SCSIDEBUG	# Add SCSI debugging statements
#options	KGDB		# Kernel debugger (KGDB) support
#options	PANICBUTTON	# Forced crash via keypress (???)

grfcc0		at mainbus0		# custom chips
grfrt0		at ztwobus0		# retina II
grfrh0		at zthreebus0		# retina III
grf0		at grfcc0
grf1		at grfrt0
grf2		at grfrh0
ite*		at grf?			# terminal emulators for grf's

# scsi stuff, all possible
gvpbus0		at ztwobus0
gtsc0		at gvpbus0		# GVP series II scsi
ahsc0		at mainbus0		# A3000 scsi
atzsc0		at ztwobus0
wstsc0		at ztwobus0		# Wordsync II scsi
ivsc0		at ztwobus0		# IVS scsi
mlhsc0		at ztwobus0		# Hacker scsi
otgsc0		at ztwobus0		# 12 gauge scsi
zssc0		at ztwobus0		# Zeus scsi
mgnsc0		at ztwobus0		# Magnum scsi
wesc0		at zthreebus0		# Warp Engine scsi
idesc0		at mainbus0		# A4000(A1200?) IDE

scsibus0	at gtsc0
scsibus1	at ahsc0
scsibus2	at atzsc0
scsibus2	at wstsc0
scsibus3	at ivsc0
scsibus4	at mlhsc0
scsibus5	at otgsc0
scsibus6	at zssc0
scsibus7	at mgnsc0
scsibus8	at wesc0
scsibus9	at idesc0

#
# compat.
#
sd0	at scsibus? target 0 lun 0
sd1	at scsibus? target 1 lun 0
sd2	at scsibus? target 2 lun 0
sd3	at scsibus? target 3 lun 0
sd4	at scsibus? target 4 lun 0
sd5	at scsibus? target 5 lun 0
sd6	at scsibus? target 6 lun 0
sd7	at scsibus? target ? lun 0

#
# This is nicer however many amiga setups expect sd units to refer to
# scsi target numbers.  If this is not the case, you can remove the 
# specific sdx lines above and each hard drive from low target to high
# will configure to the next available sd unit number

sd*	at scsibus? target ? lun ?	# scsi disks
st*	at scsibus? target ? lun ?	# scsi tapes
cd*	at scsibus? target ? lun ?	# scsi cd's

pseudo-device	sl			# slip
pseudo-device	view 10			# views
pseudo-device	pty 16			# pseudo terminals
pseudo-device	loop			# network loopback

config	netbsd swap on generic