NetBSD/usr.bin/mail/tty.c

374 lines
8.1 KiB
C
Raw Normal View History

2011-09-16 19:39:25 +04:00
/* $NetBSD: tty.c,v 1.29 2011/09/16 15:39:27 joerg Exp $ */
1993-03-21 12:45:37 +03:00
/*
1994-06-29 09:09:04 +04:00
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
1993-03-21 12:45:37 +03:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1993-03-21 12:45:37 +03:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
1993-03-21 12:45:37 +03:00
#ifndef lint
#if 0
1996-12-28 10:10:57 +03:00
static char sccsid[] = "@(#)tty.c 8.2 (Berkeley) 6/6/93";
#else
2011-09-16 19:39:25 +04:00
__RCSID("$NetBSD: tty.c,v 1.29 2011/09/16 15:39:27 joerg Exp $");
#endif
1993-03-21 12:45:37 +03:00
#endif /* not lint */
/*
* Mail -- a mail program
*
* Generally useful tty stuff.
*/
#include "rcv.h"
1994-06-29 09:09:04 +04:00
#include "extern.h"
#ifdef USE_EDITLINE
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# include "complete.h"
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
#endif
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#include "sig.h"
1993-03-21 12:45:37 +03:00
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
static jmp_buf tty_jmpbuf; /* Place to go when interrupted */
#ifndef USE_EDITLINE
1995-05-02 05:40:14 +04:00
static cc_t c_erase; /* Current erase char */
static cc_t c_kill; /* Current kill char */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# ifndef TIOCSTI
1993-03-21 12:45:37 +03:00
static int ttyset; /* We must now do erase/kill */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# endif
#endif /* USE_EDITLINE */
1993-03-21 12:45:37 +03:00
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Read up a header from standard input.
* The source string has the preliminary contents to
* be read.
*
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
* Returns: an salloc'ed copy of the line read if successful, or NULL
* if no characters were read or if an error occurred.
*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*/
#ifdef USE_EDITLINE
static char *
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
readtty(const char *pr, char *src)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
{
char *line;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
line = my_gets(&elm.string, pr, src);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
if (line == NULL)
(void)putc('\n', stdout);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return line ? savestr(line) : __UNCONST("");
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#else /* not USE_EDITLINE */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static char *
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
readtty(const char *pr, char *src)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
{
char canonb[LINESIZE];
char *cp, *cp2;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
int c;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef TIOCSTI
char ch;
#endif
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fputs(pr, stdout);
(void)fflush(stdout);
if (src != NULL && strlen(src) > sizeof(canonb) - 2) {
(void)printf("too long to edit\n");
return src;
}
#ifndef TIOCSTI
if (src != NULL)
cp = copy(src, canonb);
else
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
cp = copy(__UNCONST(""), canonb);
c = *cp;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fputs(canonb, stdout);
(void)fflush(stdout);
#else
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
cp = src == NULL ? __UNCONST("") : src;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
while ((c = *cp++) != '\0') {
if ((c_erase != _POSIX_VDISABLE && c == c_erase) ||
(c_kill != _POSIX_VDISABLE && c == c_kill)) {
ch = '\\';
(void)ioctl(0, TIOCSTI, &ch);
}
ch = c;
(void)ioctl(0, TIOCSTI, &ch);
}
cp = canonb;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
*cp = '\0';
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#endif
clearerr(stdin);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
cp2 = cp;
while (cp2 < canonb + sizeof(canonb) - 1) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
c = getc(stdin);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
if (c == EOF) {
if (feof(stdin))
(void)putc('\n', stdout);
break;
}
if (c == '\n')
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
break;
*cp2++ = c;
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
*cp2 = '\0';
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (c == EOF && ferror(stdin)) {
cp = strlen(canonb) > 0 ? canonb : NULL;
clearerr(stdin);
return readtty(pr, cp);
}
#ifndef TIOCSTI
if (cp == NULL || *cp == '\0')
return src;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (ttyset == 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return strlen(canonb) > 0 ? savestr(canonb) : NULL;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
/*
* Do erase and kill.
*/
cp2 = cp;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
while (*cp != '\0') {
c = *cp++;
if (c_erase != _POSIX_VDISABLE && c == c_erase) {
if (cp2 == canonb)
continue;
if (cp2[-1] == '\\') {
cp2[-1] = c;
continue;
}
cp2--;
continue;
}
if (c_kill != _POSIX_VDISABLE && c == c_kill) {
if (cp2 == canonb)
continue;
if (cp2[-1] == '\\') {
cp2[-1] = c;
continue;
}
cp2 = canonb;
continue;
}
*cp2++ = c;
}
*cp2 = '\0';
#endif
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (canonb[0] == '\0')
return __UNCONST("");
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return savestr(canonb);
}
#endif /* USE_EDITLINE */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#ifdef USE_EDITLINE
# define save_erase_and_kill(t) 0
#else
static int
save_erase_and_kill(struct termios *t)
{
# ifndef TIOCSTI
ttyset = 0;
#endif
if (tcgetattr(fileno(stdin), t) == -1) {
warn("tcgetattr");
return -1;
}
c_erase = t->c_cc[VERASE];
c_kill = t->c_cc[VKILL];
return 0;
}
#endif
#if defined(USE_EDITLINE) || defined(TIOCSTI)
# define disable_erase_and_kill(t)
#else
static void
disable_erase_and_kill(struct termios *t)
{
if (ttyset == 0) {
ttyset = 1;
t->c_cc[VERASE] = _POSIX_VDISABLE;
t->c_cc[VKILL] = _POSIX_VDISABLE;
(void)tcsetattr(fileno(stdin), TCSADRAIN, t);
}
}
#endif
#if defined(USE_EDITLINE) || defined(TIOCSTI)
# define restore_erase_and_kill(t)
#else
static void
restore_erase_and_kill(struct termios *t)
{
if (ttyset != 0) {
ttyset = 0;
t->c_cc[VERASE] = c_erase;
t->c_cc[VKILL] = c_kill;
(void)tcsetattr(fileno(stdin), TCSADRAIN, t);
}
}
#endif
/*
* Do a shell-like extraction of a line
* and make a list of name from it.
* Return the list or NULL if none found.
*/
static struct name *
shextract(char *line, int ntype)
{
struct name *begin, *np, *t;
char *argv[MAXARGC];
size_t argc, i;
begin = NULL;
if (line) {
np = NULL;
argc = getrawlist(line, argv, (int)__arraycount(argv));
for (i = 0; i < argc; i++) {
t = nalloc(argv[i], ntype);
if (begin == NULL)
begin = t;
else
np->n_flink = t;
t->n_blink = np;
np = t;
}
}
return begin;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*ARGSUSED*/
2011-09-16 19:39:25 +04:00
__dead static void
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
tty_sigint(int signo __unused)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
longjmp(tty_jmpbuf, 1);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
/*
* Read all relevant header fields.
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
* Returns 0 on success; 1 if there was an error or signal.
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*/
PUBLIC int
2002-03-02 17:59:35 +03:00
grabh(struct header *hp, int gflags)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_t volatile old_sigint;
int retval;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#ifndef USE_EDITLINE
struct termios ttybuf;
# if defined(TIOCSTI) && defined(TIOCEXT)
int extproc;
# endif
1998-12-19 19:35:10 +03:00
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (save_erase_and_kill(&ttybuf))
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return -1;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# if defined(TIOCSTI) && defined(TIOCEXT)
1996-12-28 10:10:57 +03:00
extproc = ((ttybuf.c_lflag & EXTPROC) ? 1 : 0);
if (extproc) {
int flag;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
1996-12-28 10:10:57 +03:00
flag = 0;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (ioctl(fileno(stdin), TIOCEXT, &flag) == -1)
2002-03-06 00:29:30 +03:00
warn("TIOCEXT: off");
1996-12-28 10:10:57 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# endif
#endif /* USE_EDITLINE */
sig_check();
old_sigint = sig_signal(SIGINT, tty_sigint);
/* return here if we detect a SIGINT */
if ((retval = setjmp(tty_jmpbuf)) != 0) {
(void)putc('\n', stdout);
1993-03-21 12:45:37 +03:00
goto out;
2006-09-27 03:33:23 +04:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
/*
* Do this irrespective of whether the initial string is empty.
* Otherwise, the editing is inconsistent.
*/
disable_erase_and_kill(&ttybuf);
1993-03-21 12:45:37 +03:00
if (gflags & GTO) {
hp->h_to =
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
extract(readtty("To: ", detract(hp->h_to, 0)), GTO);
1993-03-21 12:45:37 +03:00
}
if (gflags & GSUBJECT) {
hp->h_subject = readtty("Subject: ", hp->h_subject);
}
if (gflags & GCC) {
hp->h_cc =
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
extract(readtty("Cc: ", detract(hp->h_cc, 0)), GCC);
1993-03-21 12:45:37 +03:00
}
if (gflags & GBCC) {
hp->h_bcc =
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
extract(readtty("Bcc: ", detract(hp->h_bcc, 0)), GBCC);
1993-03-21 12:45:37 +03:00
}
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
if (gflags & GSMOPTS) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
hp->h_smopts =
shextract(readtty("Smopts: ", detract(hp->h_smopts, 0)),
GSMOPTS);
}
#ifdef MIME_SUPPORT
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (gflags & GSMOPTS) { /* XXX - Use a new flag for this? */
if (hp->h_attach) {
struct attachment *ap;
int i;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
i = 0;
for (ap = hp->h_attach; ap; ap = ap->a_flink)
i++;
(void)printf("Attachment%s: %d\n", i > 1 ? "s" : "", i);
}
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
}
#endif
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
out:
restore_erase_and_kill(&ttybuf);
#ifndef USE_EDITLINE
# if defined(TIOCSTI) && defined(TIOCEXT)
1996-12-28 10:10:57 +03:00
if (extproc) {
int flag;
1996-12-28 10:10:57 +03:00
flag = 1;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (ioctl(fileno(stdin), TIOCEXT, &flag) == -1)
2002-03-06 00:29:30 +03:00
warn("TIOCEXT: on");
1996-12-28 10:10:57 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
# endif
1993-03-21 12:45:37 +03:00
#endif
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
(void)sig_signal(SIGINT, old_sigint);
sig_check();
return retval;
1993-03-21 12:45:37 +03:00
}