NetBSD/usr.bin/mail/lex.c

1136 lines
23 KiB
C
Raw Normal View History

/* $NetBSD: lex.c,v 1.43 2013/02/20 14:38:13 christos Exp $ */
1993-03-21 12:45:37 +03:00
/*
1994-06-29 09:09:04 +04:00
* Copyright (c) 1980, 1993
* The Regents of the University of California. All rights reserved.
1993-03-21 12:45:37 +03:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1993-03-21 12:45:37 +03:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
1993-03-21 12:45:37 +03:00
#ifndef lint
#if 0
1996-12-28 10:10:57 +03:00
static char sccsid[] = "@(#)lex.c 8.2 (Berkeley) 4/20/95";
#else
__RCSID("$NetBSD: lex.c,v 1.43 2013/02/20 14:38:13 christos Exp $");
#endif
1993-03-21 12:45:37 +03:00
#endif /* not lint */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include <assert.h>
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#include <util.h>
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
1993-03-21 12:45:37 +03:00
#include "rcv.h"
1994-06-29 09:09:04 +04:00
#include "extern.h"
#ifdef USE_EDITLINE
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
#include "complete.h"
#endif
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include "format.h"
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#include "sig.h"
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#include "thread.h"
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
1993-03-21 12:45:37 +03:00
/*
* Mail -- a mail program
*
* Lexical processing of commands.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static const char *prompt = DEFAULT_PROMPT;
static int *msgvec;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
static int inithdr; /* Am printing startup headers. */
static jmp_buf jmpbuf; /* The reset jmpbuf */
static int reset_on_stop; /* To do job control longjmp. */
#ifdef DEBUG_FILE_LEAK
struct glue {
struct glue *next;
int niobs;
FILE *iobs;
};
extern struct glue __sglue;
static int open_fd_cnt;
static int open_fp_cnt;
static int
file_count(void)
{
struct glue *gp;
FILE *fp;
int n;
int cnt;
cnt = 0;
for (gp = &__sglue; gp; gp = gp->next) {
for (fp = gp->iobs, n = gp->niobs; --n >= 0; fp++)
if (fp->_flags)
cnt++;
}
return cnt;
}
static int
fds_count(void)
{
int maxfd;
int cnt;
int fd;
maxfd = fcntl(0, F_MAXFD);
if (maxfd == -1) {
warn("fcntl");
return -1;
}
cnt = 0;
for (fd = 0; fd <= maxfd; fd++) {
struct stat sb;
if (fstat(fd, &sb) != -1)
cnt++;
else if (errno != EBADF
#ifdef BROKEN_CLONE_STAT /* see PRs 37878 and 37550 */
&& errno != EOPNOTSUPP
#endif
)
warn("fstat(%d): errno=%d", fd, errno);
}
return cnt;
}
static void
file_leak_init(void)
{
open_fd_cnt = fds_count();
open_fp_cnt = file_count();
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
static void
file_leak_check(void)
{
if (open_fp_cnt != file_count() ||
open_fd_cnt != fds_count()) {
(void)printf("FILE LEAK WARNING: "
"fp-count: %d (%d) "
"fd-count: %d (%d) max-fd: %d\n",
file_count(), open_fp_cnt,
fds_count(), open_fd_cnt,
fcntl(0, F_MAXFD));
}
}
#endif /* DEBUG_FILE_LEAK */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static void
update_mailname(const char *name)
{
char tbuf[PATHSIZE];
size_t l;
/* Don't realpath(3) if it's only an update request */
if (name != NULL && realpath(name, mailname) == NULL) {
warn("Can't canonicalize `%s'", name);
return;
}
if (getfold(tbuf, sizeof(tbuf)) >= 0) {
l = strlen(tbuf);
if (l < sizeof(tbuf) - 1)
tbuf[l++] = '/';
if (strncmp(tbuf, mailname, l) == 0) {
char const *sep = "", *cp = mailname + l;
l = strlen(cp);
if (l >= sizeof(displayname)) {
cp += l;
cp -= sizeof(displayname) - 5;
sep = "...";
}
(void)snprintf(displayname, sizeof(displayname),
"+%s%s", sep, cp);
return;
}
}
l = strlen(mailname);
if (l < sizeof(displayname))
strcpy(displayname, mailname);
else {
l -= sizeof(displayname) - 4 - sizeof(displayname) / 3;
(void)snprintf(displayname, sizeof(displayname), "%.*s...%s",
(int)sizeof(displayname) / 3, mailname, mailname + l);
}
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Set the size of the message vector used to construct argument
* lists to message list functions.
*/
static void
setmsize(int sz)
{
if (msgvec != 0)
free(msgvec);
msgvec = ecalloc((size_t) (sz + 1), sizeof(*msgvec));
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
1993-03-21 12:45:37 +03:00
/*
* Set up editing on the given file name.
* If the first character of name is %, we are considered to be
* editing the file, otherwise we are reading our mail which has
* signficance for mbox and so forth.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2005-07-19 05:38:38 +04:00
setfile(const char *name)
1993-03-21 12:45:37 +03:00
{
FILE *ibuf;
int i, fd;
1993-03-21 12:45:37 +03:00
struct stat stb;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char isedit = *name != '%' || getuserid(myname) != (int)getuid();
2005-07-19 05:38:38 +04:00
const char *who = name[1] ? name + 1 : myname;
1993-03-21 12:45:37 +03:00
static int shudclob;
char tempname[PATHSIZE];
1993-03-21 12:45:37 +03:00
if ((name = expand(name)) == NULL)
1993-03-21 12:45:37 +03:00
return -1;
if ((ibuf = Fopen(name, "re")) == NULL) {
1993-03-21 12:45:37 +03:00
if (!isedit && errno == ENOENT)
goto nomail;
warn("Can't open `%s'", name);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return -1;
1993-03-21 12:45:37 +03:00
}
if (fstat(fileno(ibuf), &stb) < 0) {
2002-03-06 00:29:30 +03:00
warn("fstat");
2005-07-20 03:07:10 +04:00
(void)Fclose(ibuf);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return -1;
1993-03-21 12:45:37 +03:00
}
switch (stb.st_mode & S_IFMT) {
case S_IFDIR:
2005-07-20 03:07:10 +04:00
(void)Fclose(ibuf);
1993-03-21 12:45:37 +03:00
errno = EISDIR;
2002-03-06 00:29:30 +03:00
warn("%s", name);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return -1;
1993-03-21 12:45:37 +03:00
case S_IFREG:
break;
default:
2005-07-20 03:07:10 +04:00
(void)Fclose(ibuf);
1993-03-21 12:45:37 +03:00
errno = EINVAL;
2002-03-06 00:29:30 +03:00
warn("%s", name);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return -1;
1993-03-21 12:45:37 +03:00
}
/*
* Looks like all will be well. We must now relinquish our
* hold on the current set of stuff. Must hold signals
* while we are reading the new file, else we will ruin
* the message[] data structure.
*/
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
sig_hold();
1993-03-21 12:45:37 +03:00
if (shudclob)
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
quit(jmpbuf);
1993-03-21 12:45:37 +03:00
/*
* Copy the messages into /tmp
* and set pointers.
*/
readonly = 0;
if ((i = open(name, O_WRONLY)) < 0)
1993-03-21 12:45:37 +03:00
readonly++;
else
2005-07-20 03:07:10 +04:00
(void)close(i);
1993-03-21 12:45:37 +03:00
if (shudclob) {
2005-07-20 03:07:10 +04:00
(void)fclose(itf);
(void)fclose(otf);
1993-03-21 12:45:37 +03:00
}
shudclob = 1;
edit = isedit;
2005-07-20 03:07:10 +04:00
(void)strcpy(prevfile, mailname);
update_mailname(name != mailname ? name : NULL);
1993-03-21 12:45:37 +03:00
mailsize = fsize(ibuf);
(void)snprintf(tempname, sizeof(tempname),
"%s/mail.RxXXXXXXXXXX", tmpdir);
if ((fd = mkstemp(tempname)) == -1 ||
(otf = fdopen(fd, "we")) == NULL)
err(EXIT_FAILURE, "Can't create tmp file `%s'", tempname);
if ((itf = fopen(tempname, "re")) == NULL)
err(EXIT_FAILURE, "Can't create tmp file `%s'", tempname);
2005-07-20 03:07:10 +04:00
(void)rm(tempname);
setptr(ibuf, (off_t)0);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
setmsize(get_abs_msgCount());
1996-12-28 10:10:57 +03:00
/*
* New mail may have arrived while we were reading
* the mail file, so reset mailsize to be where
1996-12-28 10:10:57 +03:00
* we really are in the file...
*/
mailsize = ftell(ibuf);
2005-07-20 03:07:10 +04:00
(void)Fclose(ibuf);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_release();
sig_check();
1993-03-21 12:45:37 +03:00
sawcom = 0;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (!edit && get_abs_msgCount() == 0) {
1993-03-21 12:45:37 +03:00
nomail:
2005-07-20 03:07:10 +04:00
(void)fprintf(stderr, "No mail for %s\n", who);
1993-03-21 12:45:37 +03:00
return -1;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
}
1996-12-28 10:10:57 +03:00
/*
* Incorporate any new mail that has arrived since we first
* started reading mail.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
incfile(void)
1996-12-28 10:10:57 +03:00
{
2005-07-20 03:07:10 +04:00
off_t newsize;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
int omsgCount;
1996-12-28 10:10:57 +03:00
FILE *ibuf;
int rval;
1996-12-28 10:10:57 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
omsgCount = get_abs_msgCount();
ibuf = Fopen(mailname, "re");
1996-12-28 10:10:57 +03:00
if (ibuf == NULL)
return -1;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
sig_hold();
1996-12-28 10:10:57 +03:00
newsize = fsize(ibuf);
if (newsize == 0 || /* mail box is now empty??? */
newsize < mailsize) { /* mail box has shrunk??? */
rval = -1;
goto done;
}
if (newsize == mailsize) {
rval = 0; /* no new mail */
goto done;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
setptr(ibuf, mailsize); /* read in new mail */
setmsize(get_abs_msgCount()); /* get the new message count */
1996-12-28 10:10:57 +03:00
mailsize = ftell(ibuf);
rval = get_abs_msgCount() - omsgCount;
done:
2005-07-20 03:07:10 +04:00
(void)Fclose(ibuf);
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_release();
sig_check();
return rval;
1996-12-28 10:10:57 +03:00
}
/*
* Return a pointer to the comment character, respecting quoting as
* done in getrawlist(). The comment character is ignored inside
* quotes.
*/
static char *
comment_char(char *line)
{
char *p;
char quotec;
quotec = '\0';
for (p = line; *p; p++) {
if (quotec != '\0') {
if (*p == quotec)
quotec = '\0';
}
else if (*p == '"' || *p == '\'')
quotec = *p;
else if (*p == COMMENT_CHAR)
return p;
}
return NULL;
}
1993-03-21 12:45:37 +03:00
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Signal handler is hooked by setup_piping().
* Respond to a broken pipe signal --
* probably caused by quitting more.
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static jmp_buf pipestop;
/*ARGSUSED*/
2011-09-16 19:39:25 +04:00
__dead static void
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
lex_brokpipe(int signo)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
longjmp(pipestop, signo);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Check the command line for any requested piping or redirection,
* depending on the value of 'c'. If "enable-pipes" is set, search
* the command line (cp) for the first occurrence of the character 'c'
* that is not in a quote or (parenthese) group.
*/
PUBLIC char *
shellpr(char *cp)
{
int quotec;
int level;
if (cp == NULL || value(ENAME_ENABLE_PIPES) == NULL)
return NULL;
level = 0;
quotec = 0;
for (/*EMPTY*/; *cp != '\0'; cp++) {
if (quotec) {
if (*cp == quotec)
quotec = 0;
if (*cp == '\\' &&
(cp[1] == quotec || cp[1] == '\\'))
cp++;
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
else {
switch (*cp) {
case '|':
case '>':
if (level == 0)
return cp;
1993-03-21 12:45:37 +03:00
break;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
case '(':
level++;
1993-03-21 12:45:37 +03:00
break;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
case ')':
level--;
1993-03-21 12:45:37 +03:00
break;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
case '"':
case '\'':
quotec = *cp;
break;
default:
1993-03-21 12:45:37 +03:00
break;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
}
return NULL;
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
static int
do_paging(const char *cmd, int c_pipe)
{
char *cp, *p;
if (value(ENAME_PAGER_OFF) != NULL)
return 0;
if (c_pipe & C_PIPE_PAGER)
return 1;
if (c_pipe & C_PIPE_CRT && value(ENAME_CRT) != NULL)
return 1;
if ((cp = value(ENAME_PAGE_ALSO)) == NULL)
return 0;
if ((p = strcasestr(cp, cmd)) == NULL)
return 0;
if (p != cp && p[-1] != ',' && !is_WSP(p[-1]))
return 0;
p += strlen(cmd);
return (*p == '\0' || *p == ',' || is_WSP(*p));
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Setup any pipe or redirection that the command line indicates.
* If none, then setup the pager unless "pager-off" is defined.
*/
static FILE *fp_stop = NULL;
static int oldfd1 = -1;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
static sig_t old_sigpipe;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
static int
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
setup_piping(const char *cmd, char *cmdline, int c_pipe)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
{
FILE *fout;
FILE *last_file;
char *cp;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
last_file = last_registered_file(0);
fout = NULL;
if ((cp = shellpr(cmdline)) != NULL) {
char c;
c = *cp;
*cp = '\0';
cp++;
if (c == '|') {
if ((fout = Popen(cp, "we")) == NULL) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
warn("Popen: %s", cp);
return -1;
Jumbo mail patch from our anonymous user: 1) Use editline [optional]: Most of this code was borrowed from src/usr.bin/ftp. It does the appropriate editing, history, and completion for all mail commands (from cmdtab[]) and also does editing on header strings ('~h' inside the mail editor). 2) '-B' flag: This will suppress the "To:" line passed to sendmail. In most configurations it will lead to sendmail adding "To: undisclosed recipients;". Currently, AFAIK mail requires at least one exposed recipient address. 3) Comments in rcfile: Currently, comments in .mailrc are only supported if the first (non-white) character on a line is '#' followed by white space, i.e., '#' is a 'nop' command. This (trivial) patch allows the more normal/expected use of '#' as a comment character. It does not respect quoting, so that might be an objection which I should fix. 4) Sendmail option editing: This adds the sendmail option string to the strings editable by the '~h' command within the mail editor. Currently, you can only set this string from the command-line, which is particularly annoying when replying to mail. 5) Reply from: When replying to a message, grab the "To:" address from the message and, if there is only one such address and it does not match a list of allowed addresses (set in the "ReplyFrom" variable), pass it to sendmail as the "From:" address for the reply (with the '-f' option). I often make aliases for myself so that my primary address is not given out; if the alias gets out, I know who to blame. Unfortunately, a reply to such a message would normally use the primary address without this patch. A warning is displayed when this is going to happen so that it can be modified with '~h'. 6) CC and BCC lists: Allow '-c' and '-b' to accept white-space or ',' delimited lists. Currently, a white-space delimited list of addresses work, but a list of aliases will not get expanded. For example, currently: mail -c "foo bar" christos will fail to send mail to 'foo' and 'bar' if these are mail aliases (in ~/.mailrc); sendmail aliases (in /etc/aliases) do work. 7) pipe command: This pipes the current message into a shell command. I use this for quick decoding of uuencoded mail, but I can imagine it might be useful for decrypting encrypted mail, too. 8) show command: This command takes a list of variables and shows their values. It is probably stupid as the 'set' command without any argument displays all variable values. Of course, if there are a lot of variables you have to sift through the list for the one(s) you want.
2006-09-18 23:46:21 +04:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
else {
const char *mode;
assert(c == '>');
mode = *cp == '>' ? "ae" : "we";
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (*cp == '>')
cp++;
cp = skip_WSP(cp);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if ((fout = Fopen(cp, mode)) == NULL) {
warn("Fopen: %s", cp);
return -1;
1993-03-21 12:45:37 +03:00
}
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
else if (do_paging(cmd, c_pipe)) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
const char *pager;
pager = value(ENAME_PAGER);
if (pager == NULL || *pager == '\0')
pager = _PATH_MORE;
if ((fout = Popen(pager, "we")) == NULL) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
warn("Popen: %s", pager);
return -1;
}
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (fout) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
old_sigpipe = sig_signal(SIGPIPE, lex_brokpipe);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fflush(stdout);
if ((oldfd1 = dup(STDOUT_FILENO)) == -1)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
err(EXIT_FAILURE, "dup failed");
if (dup2(fileno(fout), STDOUT_FILENO) == -1)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
err(EXIT_FAILURE, "dup2 failed");
fp_stop = last_file;
}
return 0;
}
/*
* This will close any piping started by setup_piping().
*/
static void
close_piping(void)
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sigset_t oset;
struct sigaction osa;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (oldfd1 != -1) {
(void)fflush(stdout);
if (fileno(stdout) != oldfd1 &&
dup2(oldfd1, STDOUT_FILENO) == -1)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
err(EXIT_FAILURE, "dup2 failed");
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
(void)sig_ignore(SIGPIPE, &osa, &oset);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
close_top_files(fp_stop);
fp_stop = NULL;
(void)close(oldfd1);
oldfd1 = -1;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
(void)sig_signal(SIGPIPE, old_sigpipe);
(void)sig_restore(SIGPIPE, &osa, &oset);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
/*
* Determine if as1 is a valid prefix of as2.
* Return true if yep.
*/
static int
isprefix(char *as1, const char *as2)
{
char *s1;
const char *s2;
s1 = as1;
s2 = as2;
while (*s1++ == *s2)
if (*s2++ == '\0')
return 1;
return *--s1 == '\0';
}
/*
* Find the correct command in the command table corresponding
* to the passed command "word"
*/
PUBLIC const struct cmd *
lex(char word[])
{
const struct cmd *cp;
for (cp = &cmdtab[0]; cp->c_name != NULL; cp++)
if (isprefix(word, cp->c_name))
return cp;
return NULL;
}
PUBLIC char *
get_cmdname(char *buf)
{
char *cp;
char *cmd;
size_t len;
for (cp = buf; *cp; cp++)
if (strchr(" \t0123456789$^.:/-+*'\">|", *cp) != NULL)
break;
/* XXX - Don't miss the pipe command! */
if (cp == buf && *cp == '|')
cp++;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
len = cp - buf + 1;
cmd = salloc(len);
(void)strlcpy(cmd, buf, len);
return cmd;
1993-03-21 12:45:37 +03:00
}
/*
* Execute a single command.
* Command functions return 0 for success, 1 for error, and -1
* for abort. A 1 or -1 aborts a load or source. A -1 aborts
* the interactive command loop.
* execute_contxt_e is in extern.h.
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
execute(char linebuf[], enum execute_contxt_e contxt)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *word;
1993-03-21 12:45:37 +03:00
char *arglist[MAXARGC];
const struct cmd * volatile com = NULL;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
char *volatile cp;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
int retval;
int c;
1993-03-21 12:45:37 +03:00
int e = 1;
/*
* Strip the white space away from the beginning
* of the command, then scan out a word, which
* consists of anything except digits and white space.
*
* Handle ! escapes differently to get the correct
* lexical conventions.
*/
cp = skip_space(linebuf);
1993-03-21 12:45:37 +03:00
if (*cp == '!') {
if (sourcing) {
2005-07-20 03:07:10 +04:00
(void)printf("Can't \"!\" while sourcing\n");
1993-03-21 12:45:37 +03:00
goto out;
}
(void)shell(cp + 1);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
word = get_cmdname(cp);
cp += strlen(word);
1993-03-21 12:45:37 +03:00
/*
* Look up the command; if not found, bitch.
* Normally, a blank command would map to the
* first command in the table; while sourcing,
* however, we ignore blank lines to eliminate
* confusion.
*/
if (sourcing && *word == '\0')
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
com = lex(word);
if (com == NULL) {
2005-07-20 03:07:10 +04:00
(void)printf("Unknown command: \"%s\"\n", word);
1993-03-21 12:45:37 +03:00
goto out;
}
/*
* See if we should execute the command -- if a conditional
* we always execute it, otherwise, check the state of cond.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if ((com->c_argtype & F) == 0 && (cond & CSKIP))
return 0;
1993-03-21 12:45:37 +03:00
/*
* Process the arguments to the command, depending
* on the type he expects. Default to an error.
* If we are sourcing an interactive command, it's
* an error.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mailmode == mm_sending && (com->c_argtype & M) == 0) {
2005-07-20 03:07:10 +04:00
(void)printf("May not execute \"%s\" while sending\n",
1993-03-21 12:45:37 +03:00
com->c_name);
goto out;
}
if (sourcing && com->c_argtype & I) {
2005-07-20 03:07:10 +04:00
(void)printf("May not execute \"%s\" while sourcing\n",
1993-03-21 12:45:37 +03:00
com->c_name);
goto out;
}
if (readonly && com->c_argtype & W) {
2005-07-20 03:07:10 +04:00
(void)printf("May not execute \"%s\" -- message file is read only\n",
1993-03-21 12:45:37 +03:00
com->c_name);
goto out;
}
if (contxt == ec_composing && com->c_argtype & R) {
2005-07-20 03:07:10 +04:00
(void)printf("Cannot recursively invoke \"%s\"\n", com->c_name);
1993-03-21 12:45:37 +03:00
goto out;
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (!sourcing && com->c_pipe && value(ENAME_INTERACTIVE) != NULL) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (setjmp(pipestop))
goto out;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (setup_piping(com->c_name, cp, com->c_pipe) == -1)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
goto out;
}
switch (com->c_argtype & ARGTYPE_MASK) {
1993-03-21 12:45:37 +03:00
case MSGLIST:
/*
* A message list defaulting to nearest forward
* legal message.
*/
if (msgvec == 0) {
2005-07-20 03:07:10 +04:00
(void)printf("Illegal use of \"message list\"\n");
1993-03-21 12:45:37 +03:00
break;
}
if ((c = getmsglist(cp, msgvec, com->c_msgflag)) < 0)
break;
if (c == 0) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
*msgvec = first(com->c_msgflag, com->c_msgmask);
1997-05-17 23:47:50 +04:00
msgvec[1] = 0;
1993-03-21 12:45:37 +03:00
}
1997-05-17 23:47:50 +04:00
if (*msgvec == 0) {
2005-07-20 03:07:10 +04:00
(void)printf("No applicable messages\n");
1993-03-21 12:45:37 +03:00
break;
}
e = (*com->c_func)(msgvec);
break;
case NDMLIST:
/*
* A message list with no defaults, but no error
* if none exist.
*/
if (msgvec == 0) {
2005-07-20 03:07:10 +04:00
(void)printf("Illegal use of \"message list\"\n");
1993-03-21 12:45:37 +03:00
break;
}
if (getmsglist(cp, msgvec, com->c_msgflag) < 0)
break;
e = (*com->c_func)(msgvec);
break;
case STRLIST:
/*
* Just the straight string, with
* leading blanks removed.
*/
cp = skip_space(cp);
1993-03-21 12:45:37 +03:00
e = (*com->c_func)(cp);
break;
case RAWLIST:
/*
* A vector of strings, in shell style.
*/
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if ((c = getrawlist(cp, arglist, (int)__arraycount(arglist))) < 0)
1993-03-21 12:45:37 +03:00
break;
if (c < com->c_minargs) {
2005-07-20 03:07:10 +04:00
(void)printf("%s requires at least %d arg(s)\n",
1993-03-21 12:45:37 +03:00
com->c_name, com->c_minargs);
break;
}
if (c > com->c_maxargs) {
2005-07-20 03:07:10 +04:00
(void)printf("%s takes no more than %d arg(s)\n",
1993-03-21 12:45:37 +03:00
com->c_name, com->c_maxargs);
break;
}
e = (*com->c_func)(arglist);
break;
case NOLIST:
/*
* Just the constant zero, for exiting,
* eg.
*/
e = (*com->c_func)(0);
break;
default:
errx(EXIT_FAILURE, "Unknown argtype");
1993-03-21 12:45:37 +03:00
}
out:
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
close_piping();
1993-03-21 12:45:37 +03:00
/*
* Exit the current source file on
* error.
*/
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
retval = 0;
1993-03-21 12:45:37 +03:00
if (e) {
if (e < 0)
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
retval = 1;
else if (loading)
retval = 1;
else if (sourcing)
2005-07-20 03:07:10 +04:00
(void)unstack();
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
else if (com != NULL) {
if (contxt != ec_autoprint && com->c_argtype & P &&
value(ENAME_AUTOPRINT) != NULL &&
(dot->m_flag & MDELETED) == 0)
(void)execute(__UNCONST("print ."), ec_autoprint);
if (!sourcing && (com->c_argtype & T) == 0)
sawcom = 1;
}
sig_check();
return retval;
1993-03-21 12:45:37 +03:00
}
/*
* The following gets called on receipt of an interrupt. This is
* to abort printout of a command, mainly.
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
* Dispatching here when commands() is inactive crashes rcv.
1993-03-21 12:45:37 +03:00
* Close all open files except 0, 1, 2, and the temporary.
* Also, unstack all source files.
*/
2011-09-16 19:39:25 +04:00
__dead static void
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
lex_intr(int signo)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
1993-03-21 12:45:37 +03:00
noreset = 0;
if (!inithdr)
sawcom++;
inithdr = 0;
while (sourcing)
2005-07-20 03:07:10 +04:00
(void)unstack();
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
close_piping();
1993-03-21 12:45:37 +03:00
close_all_files();
if (image >= 0) {
2005-07-20 03:07:10 +04:00
(void)close(image);
1993-03-21 12:45:37 +03:00
image = -1;
}
2005-07-20 03:07:10 +04:00
(void)fprintf(stderr, "Interrupt\n");
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
longjmp(jmpbuf, signo);
1993-03-21 12:45:37 +03:00
}
/*
* Branch here on hangup signal and simulate "exit".
*/
/*ARGSUSED*/
2011-09-16 19:39:25 +04:00
__dead static void
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
lex_hangup(int s __unused)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
1993-03-21 12:45:37 +03:00
/* nothing to do? */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
exit(EXIT_FAILURE);
}
/*
* When we wake up after ^Z, reprint the prompt.
*
* NOTE: EditLine deals with the prompt and job control, so with it
* this does nothing, i.e., reset_on_stop == 0.
*/
static void
lex_stop(int signo)
{
if (reset_on_stop) {
reset_on_stop = 0;
longjmp(jmpbuf, signo);
}
1993-03-21 12:45:37 +03:00
}
/*
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
* Interpret user commands one by one. If standard input is not a tty,
* print no prompt.
1993-03-21 12:45:37 +03:00
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
commands(void)
1993-03-21 12:45:37 +03:00
{
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
int n;
char linebuf[LINESIZE];
int eofloop;
1993-03-21 12:45:37 +03:00
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#ifdef DEBUG_FILE_LEAK
file_leak_init();
#endif
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (!sourcing) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
sig_hold();
(void)sig_signal(SIGINT, lex_intr);
(void)sig_signal(SIGHUP, lex_hangup);
(void)sig_signal(SIGTSTP, lex_stop);
(void)sig_signal(SIGTTOU, lex_stop);
(void)sig_signal(SIGTTIN, lex_stop);
sig_release();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
(void)setjmp(jmpbuf); /* "reset" location if we got an interrupt */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
eofloop = 0; /* initialize this after a possible longjmp */
for (;;) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)fflush(stdout);
sreset();
/*
* Print the prompt, if needed. Clear out
* string space, and flush the output.
*/
if (!sourcing && value(ENAME_INTERACTIVE) != NULL) {
if ((prompt = value(ENAME_PROMPT)) == NULL)
prompt = DEFAULT_PROMPT;
prompt = smsgprintf(prompt, dot);
if ((value(ENAME_AUTOINC) != NULL) && (incfile() > 0))
(void)printf("New mail has arrived.\n");
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifndef USE_EDITLINE
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
reset_on_stop = 1; /* enable job control longjmp */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)printf("%s", prompt);
#endif
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#ifdef DEBUG_FILE_LEAK
file_leak_check();
#endif
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Read a line of commands from the current input
* and handle end of file specially.
*/
n = 0;
for (;;) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
sig_check();
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef USE_EDITLINE
if (!sourcing) {
char *line;
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
line = my_gets(&elm.command, prompt, NULL);
if (line == NULL) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (n == 0)
n = -1;
break;
}
(void)strlcpy(linebuf, line, sizeof(linebuf));
}
else {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (readline(input, &linebuf[n], LINESIZE - n, 0) < 0) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (n == 0)
n = -1;
break;
}
}
#else /* USE_EDITLINE */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (readline(input, &linebuf[n], LINESIZE - n, reset_on_stop) < 0) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (n == 0)
n = -1;
break;
}
#endif /* USE_EDITLINE */
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if (!sourcing)
setscreensize(); /* so we can resize window */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (sourcing) { /* allow comments in source files */
char *ptr;
if ((ptr = comment_char(linebuf)) != NULL)
*ptr = '\0';
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
if ((n = (int)strlen(linebuf)) == 0)
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
break;
n--;
if (linebuf[n] != '\\')
break;
linebuf[n++] = ' ';
}
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
#ifndef USE_EDITLINE
sig_check();
reset_on_stop = 0; /* disable job control longjmp */
#endif
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (n < 0) {
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
char *p;
/* eof */
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (loading)
break;
if (sourcing) {
(void)unstack();
continue;
}
if (value(ENAME_INTERACTIVE) != NULL &&
From Anon Ymous: - Remove all longjmp(3) calls from signal handlers. Instead, we post to an internal signal queue and check that periodically. All signal related code is now in sig.c, except for the SIGCHLD handler which remains in popen.c as it is intimately tied to routines there. - Handle SIGPIPE in type1() regardless of mime support, or else the handler in execute() will prevent our error code from being returned resulting in 'sawcom' not being set on the first command as it should. This only affected the initial behavior of the "next" command without mime support. - Add the 'T' flag to many commands in cmdtab.c that should not look like the first command. E.g., start mail on a mailbox with multiple messages, run "set foo", then "next", and watch the second message get displayed rather than the first as is the case without the first "set" command. - Add file descriptor and file handle leak detection. Enabled by DEBUG_FILE_LEAK. This will likely disappear in the future. - Fix a long standing (since import in 1993) longjmp() bug in edstop(): the jmpbuf was invalid when quit() is called at the end of main. - Fix a long standing bug (since import in 1993) in snarf() where it didn't strip whitespace correctly if the line consisted only of whitespace. - Lint cleanup. - New Feature: "Header" command. This allows miscellaneous header fields to be added to the header, e.g., "X-Organization:" or "Reply-To:" fields. - New Feature: "page-also" variable. This allows the specification of additional commands to page. It is more flexible than "crt". - Document the "pager-off" variable: if set, it disables paging entirely.
2009-04-10 17:08:24 +04:00
(p = value(ENAME_IGNOREEOF)) != NULL &&
++eofloop < (*p == '\0' ? 25 : atoi(p))) {
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
(void)printf("Use \"quit\" to quit.\n");
continue;
}
break;
}
eofloop = 0;
if (execute(linebuf, ec_normal))
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
break;
1993-03-21 12:45:37 +03:00
}
}
/*
* Announce information about the file we are editing.
* Return a likely place to set dot.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
2002-03-02 17:59:35 +03:00
newfileinfo(int omsgCount)
1993-03-21 12:45:37 +03:00
{
struct message *mp;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
int d, n, s, t, u, mdot;
1993-03-21 12:45:37 +03:00
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Figure out where to set the 'dot'. Use the first new or
* unread message.
*/
for (mp = get_abs_message(omsgCount + 1); mp;
mp = next_abs_message(mp))
1993-03-21 12:45:37 +03:00
if (mp->m_flag & MNEW)
break;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mp == NULL)
for (mp = get_abs_message(omsgCount + 1); mp;
mp = next_abs_message(mp))
1993-03-21 12:45:37 +03:00
if ((mp->m_flag & MREAD) == 0)
break;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mp != NULL)
mdot = get_msgnum(mp);
1993-03-21 12:45:37 +03:00
else
1996-12-28 10:10:57 +03:00
mdot = omsgCount + 1;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
#ifdef THREAD_SUPPORT
/*
* See if the message is in the current thread.
*/
if (mp != NULL && get_message(1) != NULL && get_message(mdot) != mp)
mdot = 0;
#endif
/*
* Scan the message array counting the new, unread, deleted,
* and saved messages.
*/
d = n = s = t = u = 0;
for (mp = get_abs_message(1); mp; mp = next_abs_message(mp)) {
1993-03-21 12:45:37 +03:00
if (mp->m_flag & MNEW)
n++;
if ((mp->m_flag & MREAD) == 0)
u++;
if (mp->m_flag & MDELETED)
d++;
if (mp->m_flag & MSAVED)
s++;
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (mp->m_flag & MTAGGED)
t++;
1993-03-21 12:45:37 +03:00
}
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
/*
* Display the statistics.
*/
update_mailname(NULL);
(void)printf("\"%s\": ", displayname);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
{
int cnt = get_abs_msgCount();
(void)printf("%d message%s", cnt, cnt == 1 ? "" : "s");
}
1993-03-21 12:45:37 +03:00
if (n > 0)
2005-07-20 03:07:10 +04:00
(void)printf(" %d new", n);
1993-03-21 12:45:37 +03:00
if (u-n > 0)
2005-07-20 03:07:10 +04:00
(void)printf(" %d unread", u);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
if (t > 0)
(void)printf(" %d tagged", t);
1993-03-21 12:45:37 +03:00
if (d > 0)
2005-07-20 03:07:10 +04:00
(void)printf(" %d deleted", d);
1993-03-21 12:45:37 +03:00
if (s > 0)
2005-07-20 03:07:10 +04:00
(void)printf(" %d saved", s);
1993-03-21 12:45:37 +03:00
if (readonly)
2005-07-20 03:07:10 +04:00
(void)printf(" [Read only]");
(void)printf("\n");
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return mdot;
}
/*
* Announce the presence of the current Mail version,
* give the message count, and print a header listing.
*/
PUBLIC void
announce(void)
{
int vec[2], mdot;
mdot = newfileinfo(0);
vec[0] = mdot;
vec[1] = 0;
if ((dot = get_message(mdot)) == NULL)
dot = get_abs_message(1); /* make sure we get something! */
if (get_abs_msgCount() > 0 && value(ENAME_NOHEADER) == NULL) {
inithdr++;
(void)headers(vec);
inithdr = 0;
}
1993-03-21 12:45:37 +03:00
}
/*
* Print the current version number.
*/
/*ARGSUSED*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC int
pversion(void *v __unused)
1993-03-21 12:45:37 +03:00
{
2005-07-20 03:07:10 +04:00
(void)printf("Version %s\n", version);
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
return 0;
1993-03-21 12:45:37 +03:00
}
/*
* Load a file of user definitions.
*/
From Anon Ymous: 1) Statification of modules. 2) Implement the 'detach' and 'Detach' commands for extracting mime parts from messages. 3) Teach mail to output "In-Reply-To" and "References" header fields when replying so others can thread us. 4) Implement threading, sorting, and tagging, supported by the following commands: 'flatten', 'reverse', 'sort', 'thread', 'unthread', 'down', 'tset', 'up', 'expose', 'hide', 'tag', 'untag', 'invtags', 'tagbelow', 'hidetags', 'showtags'. See the manpage for details (when available - soon). 5) Implement a 'deldups' command to delete duplicate messages based on their "Message-Id" field, e.g., in replies to a mailing list that are also CCed to a subscriber. (This can also be accomplished with the threading and tagging commands.) 6) Implement 'ifdef' and 'ifndef' commands, and make the conditionals nestable (i.e., implement a conditional stack). The if/else/endif commands existed before, but they were primitive and undocumented. The 'if' command currently recognizes the "receiving", "sending", and "headersonly" mode keywords. 7) Teach the message selecting routine to understand regular expressions if "regex-search" is defined. Otherwise only case insensitive substring matches are done (as in the past). 8) Teach the message selection routine to understand boolean expressions. Improved "colon-modifier" support. See the manpage for details (when available - soon). 9) Extend paging to all commands (where relevant). 10) Add shell like piping and redirection of (standard) output (if "enable-piping" is defined). Extend completion to these contexts. 11) The manpage should follow soon!!!!
2006-11-28 21:45:32 +03:00
PUBLIC void
2005-07-19 05:38:38 +04:00
load(const char *name)
1993-03-21 12:45:37 +03:00
{
FILE *in, *oldin;
1993-03-21 12:45:37 +03:00
if ((in = Fopen(name, "re")) == NULL)
1993-03-21 12:45:37 +03:00
return;
oldin = input;
input = in;
loading = 1;
sourcing = 1;
commands();
loading = 0;
sourcing = 0;
input = oldin;
2005-07-20 03:07:10 +04:00
(void)Fclose(in);
1993-03-21 12:45:37 +03:00
}