NetBSD/sys/dev/sbus/magma.c

1886 lines
42 KiB
C
Raw Normal View History

/* $NetBSD: magma.c,v 1.10 2001/05/02 10:32:11 scw Exp $ */
/*
* magma.c
*
* Copyright (c) 1998 Iain Hibbert
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Iain Hibbert
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#if 0
#define MAGMA_DEBUG
#endif
/*
* Driver for Magma SBus Serial/Parallel cards using the Cirrus Logic
* CD1400 & CD1190 chips
*/
#include "magma.h"
#if NMAGMA > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/device.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/malloc.h>
#include <sys/tty.h>
#include <sys/time.h>
#include <sys/kernel.h>
#include <sys/syslog.h>
#include <sys/conf.h>
#include <sys/errno.h>
#include <machine/bus.h>
#include <machine/intr.h>
1998-07-28 04:31:42 +04:00
#include <machine/autoconf.h>
#include <machine/conf.h>
1998-07-28 04:31:42 +04:00
#include <dev/sbus/sbusvar.h>
#include <dev/ic/cd1400reg.h>
#include <dev/ic/cd1190reg.h>
1998-07-28 04:31:42 +04:00
#include <dev/sbus/mbppio.h>
#include <dev/sbus/magmareg.h>
/*
* Select tty soft interrupt bit based on TTY ipl. (stole from zs.c)
*/
#if PIL_TTY == 1
# define IE_MSOFT IE_L1
#elif PIL_TTY == 4
# define IE_MSOFT IE_L4
#elif PIL_TTY == 6
# define IE_MSOFT IE_L6
#else
# error "no suitable software interrupt bit"
#endif
/* supported cards
*
* The table below lists the cards that this driver is likely to
* be able to support.
*
* Cards with parallel ports: except for the LC2+1Sp, they all use
* the CD1190 chip which I know nothing about. I've tried to leave
* hooks for it so it shouldn't be too hard to add support later.
* (I think somebody is working on this separately)
*
* Thanks to Bruce at Magma for telling me the hardware offsets.
*/
static struct magma_board_info supported_cards[] = {
{
"MAGMA,4_Sp", "Magma 4 Sp", 4, 0,
1, 0xa000, 0xc000, 0xe000, { 0x8000, 0, 0, 0 },
0, { 0, 0 }
},
{
"MAGMA,8_Sp", "Magma 8 Sp", 8, 0,
2, 0xa000, 0xc000, 0xe000, { 0x4000, 0x6000, 0, 0 },
0, { 0, 0 }
},
{
"MAGMA,_8HS_Sp", "Magma Fast 8 Sp", 8, 0,
2, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0, 0 },
0, { 0, 0 }
},
{
"MAGMA,_8SP_422", "Magma 8 Sp - 422", 8, 0,
2, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0, 0 },
0, { 0, 0 }
},
{
"MAGMA,12_Sp", "Magma 12 Sp", 12, 0,
3, 0xa000, 0xc000, 0xe000, { 0x2000, 0x4000, 0x6000, 0 },
0, { 0, 0 }
},
{
"MAGMA,16_Sp", "Magma 16 Sp", 16, 0,
4, 0xd000, 0xe000, 0xf000, { 0x8000, 0x9000, 0xa000, 0xb000 },
0, { 0, 0 }
},
{
"MAGMA,16_Sp_2", "Magma 16 Sp", 16, 0,
4, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0xc000, 0xe000 },
0, { 0, 0 }
},
{
"MAGMA,16HS_Sp", "Magma Fast 16 Sp", 16, 0,
4, 0x2000, 0x4000, 0x6000, { 0x8000, 0xa000, 0xc000, 0xe000 },
0, { 0, 0 }
},
{
"MAGMA,21_Sp", "Magma LC 2+1 Sp", 2, 1,
1, 0xa000, 0xc000, 0xe000, { 0x8000, 0, 0, 0 },
0, { 0, 0 }
},
{
"MAGMA,21HS_Sp", "Magma 2+1 Sp", 2, 1,
1, 0xa000, 0xc000, 0xe000, { 0x4000, 0, 0, 0 },
1, { 0x6000, 0 }
},
{
"MAGMA,41_Sp", "Magma 4+1 Sp", 4, 1,
1, 0xa000, 0xc000, 0xe000, { 0x4000, 0, 0, 0 },
1, { 0x6000, 0 }
},
{
"MAGMA,82_Sp", "Magma 8+2 Sp", 8, 2,
2, 0xd000, 0xe000, 0xf000, { 0x8000, 0x9000, 0, 0 },
2, { 0xa000, 0xb000 }
},
{
"MAGMA,P1_Sp", "Magma P1 Sp", 0, 1,
0, 0, 0, 0, { 0, 0, 0, 0 },
1, { 0x8000, 0 }
},
{
"MAGMA,P2_Sp", "Magma P2 Sp", 0, 2,
0, 0, 0, 0, { 0, 0, 0, 0 },
2, { 0x4000, 0x8000 }
},
{
NULL, NULL, 0, 0,
0, 0, 0, 0, { 0, 0, 0, 0 },
0, { 0, 0 }
}
};
/************************************************************************
*
* Autoconfig Stuff
*/
struct cfattach magma_ca = {
sizeof(struct magma_softc), magma_match, magma_attach
};
struct cfattach mtty_ca = {
sizeof(struct mtty_softc), mtty_match, mtty_attach
};
struct cfattach mbpp_ca = {
sizeof(struct mbpp_softc), mbpp_match, mbpp_attach
};
extern struct cfdriver mtty_cd;
extern struct cfdriver mbpp_cd;
/************************************************************************
*
* CD1400 Routines
*
* cd1400_compute_baud calculate COR/BPR register values
* cd1400_write_ccr write a value to CD1400 ccr
* cd1400_read_reg read from a CD1400 register
* cd1400_write_reg write to a CD1400 register
* cd1400_enable_transmitter enable transmitting on CD1400 channel
*/
/*
* compute the bpr/cor pair for any baud rate
* returns 0 for success, 1 for failure
*/
int
cd1400_compute_baud(speed, clock, cor, bpr)
speed_t speed;
int clock;
int *cor, *bpr;
{
int c, co, br;
if( speed < 50 || speed > 150000 )
return(1);
for( c = 0, co = 8 ; co <= 2048 ; co <<= 2, c++ ) {
br = ((clock * 1000000) + (co * speed) / 2) / (co * speed);
if( br < 0x100 ) {
*bpr = br;
*cor = c;
return(0);
}
}
return(1);
}
/*
* Write a CD1400 channel command, should have a timeout?
*/
__inline void
cd1400_write_ccr(cd, cmd)
struct cd1400 *cd;
u_char cmd;
{
while( cd1400_read_reg(cd, CD1400_CCR) )
;
cd1400_write_reg(cd, CD1400_CCR, cmd);
}
/*
* read a value from a cd1400 register
*/
__inline u_char
cd1400_read_reg(cd, reg)
struct cd1400 *cd;
int reg;
{
return(cd->cd_reg[reg]);
}
/*
* write a value to a cd1400 register
*/
__inline void
cd1400_write_reg(cd, reg, value)
struct cd1400 *cd;
int reg;
u_char value;
{
cd->cd_reg[reg] = value;
}
/*
* enable transmit service requests for cd1400 channel
*/
void
cd1400_enable_transmitter(cd, channel)
struct cd1400 *cd;
int channel;
{
int s, srer;
s = spltty();
cd1400_write_reg(cd, CD1400_CAR, channel);
srer = cd1400_read_reg(cd, CD1400_SRER);
SET(srer, CD1400_SRER_TXRDY);
cd1400_write_reg(cd, CD1400_SRER, srer);
splx(s);
}
/************************************************************************
*
* CD1190 Routines
*/
/* well, there are none yet */
/************************************************************************
*
* Magma Routines
*
* magma_match reports if we have a magma board available
* magma_attach attaches magma boards to the sbus
* magma_hard hardware level interrupt routine
* magma_soft software level interrupt routine
*/
int
magma_match(parent, cf, aux)
struct device *parent;
struct cfdata *cf;
void *aux;
{
struct sbus_attach_args *sa = aux;
/* is it a magma Sp card? */
if( strcmp(sa->sa_name, "MAGMA_Sp") != 0 )
return(0);
dprintf(("magma: matched `%s'\n", sa->sa_name));
dprintf(("magma: magma_prom `%s'\n",
getpropstring(sa->sa_node, "magma_prom")));
dprintf(("magma: intlevels `%s'\n",
getpropstring(sa->sa_node, "intlevels")));
dprintf(("magma: chiprev `%s'\n",
getpropstring(sa->sa_node, "chiprev")));
dprintf(("magma: clock `%s'\n",
getpropstring(sa->sa_node, "clock")));
return (1);
}
void
magma_attach(parent, self, aux)
struct device *parent;
struct device *self;
void *aux;
{
struct sbus_attach_args *sa = aux;
struct magma_softc *sc = (struct magma_softc *)self;
struct magma_board_info *card = supported_cards;
bus_space_handle_t bh;
char *magma_prom;
int node, chip;
node = sa->sa_node;
magma_prom = getpropstring(node, "magma_prom");
/* find the card type */
while (card->mb_name && strcmp(magma_prom, card->mb_name) != 0)
card++;
dprintf((" addr %p", sc));
printf(" softpri %d:", PIL_TTY);
if( card->mb_name == NULL ) {
printf(" %s (unsupported)\n", magma_prom);
return;
}
printf(" %s\n", card->mb_realname);
sc->ms_board = card;
sc->ms_ncd1400 = card->mb_ncd1400;
sc->ms_ncd1190 = card->mb_ncd1190;
if (sbus_bus_map(sa->sa_bustag,
sa->sa_slot,
sa->sa_offset,
sa->sa_size,
BUS_SPACE_MAP_LINEAR,
0, &bh) != 0) {
printf("%s @ sbus: cannot map registers\n", self->dv_xname);
return;
}
/* the SVCACK* lines are daisychained */
sc->ms_svcackr = (caddr_t)bh + card->mb_svcackr;
sc->ms_svcackt = (caddr_t)bh + card->mb_svcackt;
sc->ms_svcackm = (caddr_t)bh + card->mb_svcackm;
/* init the cd1400 chips */
for( chip = 0 ; chip < card->mb_ncd1400 ; chip++ ) {
struct cd1400 *cd = &sc->ms_cd1400[chip];
cd->cd_reg = (caddr_t)bh + card->mb_cd1400[chip];
/* XXX getpropstring(node, "clock") */
cd->cd_clock = 25;
/* getpropstring(node, "chiprev"); */
/* seemingly the Magma drivers just ignore the propstring */
cd->cd_chiprev = cd1400_read_reg(cd, CD1400_GFRCR);
dprintf(("%s attach CD1400 %d addr %p rev %x clock %dMhz\n",
sc->ms_dev.dv_xname, chip,
cd->cd_reg, cd->cd_chiprev, cd->cd_clock));
/* clear GFRCR */
cd1400_write_reg(cd, CD1400_GFRCR, 0x00);
/* reset whole chip */
cd1400_write_ccr(cd, CD1400_CCR_CMDRESET | CD1400_CCR_FULLRESET);
/* wait for revision code to be restored */
while( cd1400_read_reg(cd, CD1400_GFRCR) != cd->cd_chiprev )
;
/* set the Prescaler Period Register to tick at 1ms */
cd1400_write_reg(cd, CD1400_PPR,
((cd->cd_clock * 1000000 / CD1400_PPR_PRESCALER + 500) / 1000));
/* The LC2+1Sp card is the only card that doesn't have
* a CD1190 for the parallel port, but uses channel 0 of
* the CD1400, so we make a note of it for later and set up
* the CD1400 for parallel mode operation.
*/
if( card->mb_npar && card->mb_ncd1190 == 0 ) {
cd1400_write_reg(cd, CD1400_GCR, CD1400_GCR_PARALLEL);
cd->cd_parmode = 1;
}
}
/* init the cd1190 chips */
for( chip = 0 ; chip < card->mb_ncd1190 ; chip++ ) {
struct cd1190 *cd = &sc->ms_cd1190[chip];
cd->cd_reg = (caddr_t)bh + card->mb_cd1190[chip];
dprintf(("%s attach CD1190 %d addr %p (failed)\n",
self->dv_xname, chip, cd->cd_reg));
/* XXX don't know anything about these chips yet */
}
sbus_establish(&sc->ms_sd, &sc->ms_dev);
/* configure the children */
(void)config_found(self, mtty_match, NULL);
(void)config_found(self, mbpp_match, NULL);
/*
* Establish the interrupt handlers.
*/
if (sa->sa_nintr == 0)
return; /* No interrupts to service!? */
(void)bus_intr_establish(sa->sa_bustag, sa->sa_pri, IPL_TTY,
0, magma_hard, sc);
(void)bus_intr_establish(sa->sa_bustag, PIL_TTY, IPL_SOFTSERIAL,
BUS_INTR_ESTABLISH_SOFTINTR,
magma_soft, sc);
evcnt_attach_dynamic(&sc->ms_intrcnt, EVCNT_TYPE_INTR, NULL,
sc->ms_dev.dv_xname, "intr");
}
/*
* hard interrupt routine
*
* returns 1 if it handled it, otherwise 0
*
* runs at interrupt priority
*/
int
magma_hard(arg)
void *arg;
{
struct magma_softc *sc = arg;
struct cd1400 *cd;
int chip, status = 0;
int serviced = 0;
int needsoftint = 0;
/*
* check status of all the CD1400 chips
*/
for( chip = 0 ; chip < sc->ms_ncd1400 ; chip++ )
status |= cd1400_read_reg(&sc->ms_cd1400[chip], CD1400_SVRR);
if( ISSET(status, CD1400_SVRR_RXRDY) ) {
u_char rivr = *sc->ms_svcackr; /* enter rx service context */
int port = rivr >> 4;
if( rivr & (1<<3) ) { /* parallel port */
struct mbpp_port *mbpp;
int n_chars;
mbpp = &sc->ms_mbpp->ms_port[port];
cd = mbpp->mp_cd1400;
/* don't think we have to handle exceptions */
n_chars = cd1400_read_reg(cd, CD1400_RDCR);
while (n_chars--) {
if( mbpp->mp_cnt == 0 ) {
SET(mbpp->mp_flags, MBPPF_WAKEUP);
needsoftint = 1;
break;
}
*mbpp->mp_ptr = cd1400_read_reg(cd,CD1400_RDSR);
mbpp->mp_ptr++;
mbpp->mp_cnt--;
}
} else { /* serial port */
struct mtty_port *mtty;
u_char *ptr, n_chars, line_stat;
mtty = &sc->ms_mtty->ms_port[port];
cd = mtty->mp_cd1400;
if( ISSET(rivr, CD1400_RIVR_EXCEPTION) ) {
line_stat = cd1400_read_reg(cd, CD1400_RDSR);
n_chars = 1;
} else { /* no exception, received data OK */
line_stat = 0;
n_chars = cd1400_read_reg(cd, CD1400_RDCR);
}
ptr = mtty->mp_rput;
while( n_chars-- ) {
*ptr++ = line_stat;
*ptr++ = cd1400_read_reg(cd, CD1400_RDSR);
if( ptr == mtty->mp_rend ) ptr = mtty->mp_rbuf;
if( ptr == mtty->mp_rget ) {
if( ptr == mtty->mp_rbuf )
ptr = mtty->mp_rend;
ptr -= 2;
SET(mtty->mp_flags, MTTYF_RING_OVERFLOW);
break;
}
}
mtty->mp_rput = ptr;
needsoftint = 1;
}
cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */
serviced = 1;
} /* if(rx_service...) */
if( ISSET(status, CD1400_SVRR_MDMCH) ) {
u_char mivr = *sc->ms_svcackm; /* enter mdm service context */
int port = mivr >> 4;
struct mtty_port *mtty;
int carrier;
u_char msvr;
/*
* Handle CD (LC2+1Sp = DSR) changes.
*/
mtty = &sc->ms_mtty->ms_port[port];
cd = mtty->mp_cd1400;
msvr = cd1400_read_reg(cd, CD1400_MSVR2);
carrier = ISSET(msvr, cd->cd_parmode ? CD1400_MSVR2_DSR : CD1400_MSVR2_CD);
if( mtty->mp_carrier != carrier ) {
SET(mtty->mp_flags, MTTYF_CARRIER_CHANGED);
mtty->mp_carrier = carrier;
needsoftint = 1;
}
cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */
serviced = 1;
} /* if(mdm_service...) */
if( ISSET(status, CD1400_SVRR_TXRDY) ) {
u_char tivr = *sc->ms_svcackt; /* enter tx service context */
int port = tivr >> 4;
if( tivr & (1<<3) ) { /* parallel port */
struct mbpp_port *mbpp;
mbpp = &sc->ms_mbpp->ms_port[port];
cd = mbpp->mp_cd1400;
if( mbpp->mp_cnt ) {
int count = 0;
/* fill the fifo */
while (mbpp->mp_cnt &&
count++ < CD1400_PAR_FIFO_SIZE) {
cd1400_write_reg(cd, CD1400_TDR,
*mbpp->mp_ptr);
mbpp->mp_ptr++;
mbpp->mp_cnt--;
}
} else {
/*
* fifo is empty and we got no more data
* to send, so shut off interrupts and
* signal for a wakeup, which can't be
* done here in case we beat mbpp_send to
* the tsleep call (we are running at >spltty)
*/
cd1400_write_reg(cd, CD1400_SRER, 0);
SET(mbpp->mp_flags, MBPPF_WAKEUP);
needsoftint = 1;
}
} else { /* serial port */
struct mtty_port *mtty;
struct tty *tp;
mtty = &sc->ms_mtty->ms_port[port];
cd = mtty->mp_cd1400;
tp = mtty->mp_tty;
if( !ISSET(mtty->mp_flags, MTTYF_STOP) ) {
int count = 0;
/* check if we should start/stop a break */
if( ISSET(mtty->mp_flags, MTTYF_SET_BREAK) ) {
cd1400_write_reg(cd, CD1400_TDR, 0);
cd1400_write_reg(cd, CD1400_TDR, 0x81);
/* should we delay too? */
CLR(mtty->mp_flags, MTTYF_SET_BREAK);
count += 2;
}
if( ISSET(mtty->mp_flags, MTTYF_CLR_BREAK) ) {
cd1400_write_reg(cd, CD1400_TDR, 0);
cd1400_write_reg(cd, CD1400_TDR, 0x83);
CLR(mtty->mp_flags, MTTYF_CLR_BREAK);
count += 2;
}
/* I don't quite fill the fifo in case the last one is a
* NULL which I have to double up because its the escape
* code for embedded transmit characters.
*/
while( mtty->mp_txc > 0 && count < CD1400_TX_FIFO_SIZE - 1 ) {
u_char ch;
ch = *mtty->mp_txp;
mtty->mp_txc--;
mtty->mp_txp++;
if( ch == 0 ) {
cd1400_write_reg(cd, CD1400_TDR, ch);
count++;
}
cd1400_write_reg(cd, CD1400_TDR, ch);
count++;
}
}
/* if we ran out of work or are requested to STOP then
* shut off the txrdy interrupts and signal DONE to flush
* out the chars we have sent.
*/
if( mtty->mp_txc == 0 || ISSET(mtty->mp_flags, MTTYF_STOP) ) {
register int srer;
srer = cd1400_read_reg(cd, CD1400_SRER);
CLR(srer, CD1400_SRER_TXRDY);
cd1400_write_reg(cd, CD1400_SRER, srer);
CLR(mtty->mp_flags, MTTYF_STOP);
SET(mtty->mp_flags, MTTYF_DONE);
needsoftint = 1;
}
}
cd1400_write_reg(cd, CD1400_EOSRR, 0); /* end service context */
serviced = 1;
} /* if(tx_service...) */
/* XXX service CD1190 interrupts too
for( chip = 0 ; chip < sc->ms_ncd1190 ; chip++ ) {
}
*/
if( needsoftint ) { /* trigger the soft interrupt */
#if defined(SUN4M)
if( CPU_ISSUN4M )
raise(0, PIL_TTY);
else
#endif
ienab_bis(IE_MSOFT);
}
return(serviced);
}
/*
* magma soft interrupt handler
*
* returns 1 if it handled it, 0 otherwise
*
* runs at spltty()
*/
int
magma_soft(arg)
void *arg;
{
struct magma_softc *sc = arg;
struct mtty_softc *mtty = sc->ms_mtty;
struct mbpp_softc *mbpp = sc->ms_mbpp;
int port;
int serviced = 0;
int s, flags;
if (mtty == NULL)
goto chkbpp;
/*
* check the tty ports to see what needs doing
*/
for( port = 0 ; port < mtty->ms_nports ; port++ ) {
struct mtty_port *mp = &mtty->ms_port[port];
struct tty *tp = mp->mp_tty;
if( !ISSET(tp->t_state, TS_ISOPEN) )
continue;
/*
* handle any received data
*/
while( mp->mp_rget != mp->mp_rput ) {
u_char stat;
int data;
stat = mp->mp_rget[0];
data = mp->mp_rget[1];
mp->mp_rget = ((mp->mp_rget + 2) == mp->mp_rend)
? mp->mp_rbuf : (mp->mp_rget + 2);
if( stat & (CD1400_RDSR_BREAK | CD1400_RDSR_FE) )
data |= TTY_FE;
if( stat & CD1400_RDSR_PE )
data |= TTY_PE;
if( stat & CD1400_RDSR_OE )
log(LOG_WARNING, "%s%x: fifo overflow\n",
mtty->ms_dev.dv_xname, port);
(*tp->t_linesw->l_rint)(data, tp);
serviced = 1;
}
s = splhigh(); /* block out hard interrupt routine */
flags = mp->mp_flags;
CLR(mp->mp_flags, MTTYF_DONE | MTTYF_CARRIER_CHANGED | MTTYF_RING_OVERFLOW);
splx(s); /* ok */
if( ISSET(flags, MTTYF_CARRIER_CHANGED) ) {
dprintf(("%s%x: cd %s\n", mtty->ms_dev.dv_xname,
port, mp->mp_carrier ? "on" : "off"));
(*tp->t_linesw->l_modem)(tp, mp->mp_carrier);
serviced = 1;
}
if( ISSET(flags, MTTYF_RING_OVERFLOW) ) {
log(LOG_WARNING, "%s%x: ring buffer overflow\n",
mtty->ms_dev.dv_xname, port);
serviced = 1;
}
if( ISSET(flags, MTTYF_DONE) ) {
ndflush(&tp->t_outq, mp->mp_txp - tp->t_outq.c_cf);
CLR(tp->t_state, TS_BUSY);
(*tp->t_linesw->l_start)(tp); /* might be some more */
serviced = 1;
}
} /* for(each mtty...) */
chkbpp:
/*
* Check the bpp ports (if any) to see what needs doing
*/
if (mbpp == NULL)
return (serviced);
for( port = 0 ; port < mbpp->ms_nports ; port++ ) {
struct mbpp_port *mp = &mbpp->ms_port[port];
if( !ISSET(mp->mp_flags, MBPPF_OPEN) )
continue;
s = splhigh();
flags = mp->mp_flags;
CLR(mp->mp_flags, MBPPF_WAKEUP);
splx(s);
if( ISSET(flags, MBPPF_WAKEUP) ) {
wakeup(mp);
serviced = 1;
}
} /* for(each mbpp...) */
return(serviced);
}
/************************************************************************
*
* MTTY Routines
*
* mtty_match match one mtty device
* mtty_attach attach mtty devices
* mttyopen open mtty device
* mttyclose close mtty device
* mttyread read from mtty
* mttywrite write to mtty
* mttyioctl do ioctl on mtty
* mttytty return tty pointer for mtty
* mttystop stop mtty device
* mtty_start start mtty device
* mtty_param set mtty parameters
* mtty_modem_control set modem control lines
*/
int
mtty_match(parent, cf, args)
struct device *parent;
struct cfdata *cf;
void *args;
{
struct magma_softc *sc = (struct magma_softc *)parent;
return( args == mtty_match && sc->ms_board->mb_nser && sc->ms_mtty == NULL );
}
void
mtty_attach(parent, dev, args)
struct device *parent;
struct device *dev;
void *args;
{
struct magma_softc *sc = (struct magma_softc *)parent;
struct mtty_softc *ms = (struct mtty_softc *)dev;
int port, chip, chan;
sc->ms_mtty = ms;
dprintf((" addr %p", ms));
for( port = 0, chip = 0, chan = 0 ; port < sc->ms_board->mb_nser ; port++ ) {
struct mtty_port *mp = &ms->ms_port[port];
struct tty *tp;
mp->mp_cd1400 = &sc->ms_cd1400[chip];
if( mp->mp_cd1400->cd_parmode && chan == 0 )
chan = 1; /* skip channel 0 if parmode */
mp->mp_channel = chan;
tp = ttymalloc();
if( tp == NULL ) break;
tty_attach(tp);
tp->t_oproc = mtty_start;
tp->t_param = mtty_param;
mp->mp_tty = tp;
mp->mp_rbuf = malloc(MTTY_RBUF_SIZE, M_DEVBUF, M_NOWAIT);
if( mp->mp_rbuf == NULL ) break;
mp->mp_rend = mp->mp_rbuf + MTTY_RBUF_SIZE;
chan = (chan + 1) % CD1400_NO_OF_CHANNELS;
if( chan == 0 ) chip++;
}
ms->ms_nports = port;
printf(": %d tty%s\n", port, port == 1 ? "" : "s");
}
/*
* open routine. returns zero if successful, else error code
*/
int
mttyopen(dev, flags, mode, p)
dev_t dev;
int flags;
int mode;
struct proc *p;
{
int card = MAGMA_CARD(dev);
int port = MAGMA_PORT(dev);
struct mtty_softc *ms;
struct mtty_port *mp;
struct tty *tp;
struct cd1400 *cd;
int error, s;
if( card >= mtty_cd.cd_ndevs ||
(ms = mtty_cd.cd_devs[card]) == NULL || port >= ms->ms_nports )
return(ENXIO); /* device not configured */
mp = &ms->ms_port[port];
tp = mp->mp_tty;
tp->t_dev = dev;
if (ISSET(tp->t_state, TS_ISOPEN) &&
ISSET(tp->t_state, TS_XCLUDE) &&
p->p_ucred->cr_uid != 0)
return (EBUSY);
s = spltty();
if( !ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/* set defaults */
ttychars(tp);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_cflag = TTYDEF_CFLAG;
if( ISSET(mp->mp_openflags, TIOCFLAG_CLOCAL) )
SET(tp->t_cflag, CLOCAL);
if( ISSET(mp->mp_openflags, TIOCFLAG_CRTSCTS) )
SET(tp->t_cflag, CRTSCTS);
if( ISSET(mp->mp_openflags, TIOCFLAG_MDMBUF) )
SET(tp->t_cflag, MDMBUF);
tp->t_lflag = TTYDEF_LFLAG;
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
/* init ring buffer */
mp->mp_rput = mp->mp_rget = mp->mp_rbuf;
/* reset CD1400 channel */
cd = mp->mp_cd1400;
cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel);
cd1400_write_ccr(cd, CD1400_CCR_CMDRESET);
/* encode the port number in top half of LIVR */
cd1400_write_reg(cd, CD1400_LIVR, port << 4 );
/* sets parameters and raises DTR */
(void)mtty_param(tp, &tp->t_termios);
/* set tty watermarks */
ttsetwater(tp);
/* enable service requests */
cd1400_write_reg(cd, CD1400_SRER,
CD1400_SRER_RXDATA | CD1400_SRER_MDMCH);
/* tell the tty about the carrier status */
if( ISSET(mp->mp_openflags, TIOCFLAG_SOFTCAR) ||
mp->mp_carrier )
SET(tp->t_state, TS_CARR_ON);
else
CLR(tp->t_state, TS_CARR_ON);
}
splx(s);
error = ttyopen(tp, MTTY_DIALOUT(dev), ISSET(flags, O_NONBLOCK));
if (error != 0)
goto bad;
error = (*tp->t_linesw->l_open)(dev, tp);
if (error != 0)
goto bad;
bad:
if (!ISSET(tp->t_state, TS_ISOPEN) && tp->t_wopen == 0) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
/* XXX - do that here */
}
return (error);
}
/*
* close routine. returns zero if successful, else error code
*/
int
mttyclose(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct tty *tp = mp->mp_tty;
int s;
(*tp->t_linesw->l_close)(tp, flag);
ttyclose(tp);
s = spltty();
/* if HUPCL is set, and the tty is no longer open
* shut down the port
*/
if( ISSET(tp->t_cflag, HUPCL) || !ISSET(tp->t_state, TS_ISOPEN) ) {
/* XXX wait until FIFO is empty before turning off the channel
struct cd1400 *cd = mp->mp_cd1400;
*/
/* drop DTR and RTS */
(void)mtty_modem_control(mp, 0, DMSET);
/* turn off the channel
cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel);
cd1400_write_ccr(cd, CD1400_CCR_CMDRESET);
*/
}
splx(s);
return(0);
}
/*
* Read routine
*/
int
mttyread(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct tty *tp = mp->mp_tty;
return( (*tp->t_linesw->l_read)(tp, uio, flags) );
}
/*
* Write routine
*/
int
mttywrite(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct tty *tp = mp->mp_tty;
return( (*tp->t_linesw->l_write)(tp, uio, flags) );
}
/*
* Poll routine
*/
int
mttypoll(dev, events, p)
dev_t dev;
int events;
struct proc *p;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct tty *tp = mp->mp_tty;
return ((*tp->t_linesw->l_poll)(tp, events, p));
}
/*
* return tty pointer
*/
struct tty *
mttytty(dev)
dev_t dev;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
return(mp->mp_tty);
}
/*
* ioctl routine
*/
int
mttyioctl(dev, cmd, data, flags, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flags;
struct proc *p;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct tty *tp = mp->mp_tty;
int error;
error = (*tp->t_linesw->l_ioctl)(tp, cmd, data, flags, p);
if( error >= 0 ) return(error);
error = ttioctl(tp, cmd, data, flags, p);
if( error >= 0 ) return(error);
error = 0;
switch(cmd) {
case TIOCSBRK: /* set break */
SET(mp->mp_flags, MTTYF_SET_BREAK);
cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel);
break;
case TIOCCBRK: /* clear break */
SET(mp->mp_flags, MTTYF_CLR_BREAK);
cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel);
break;
case TIOCSDTR: /* set DTR */
mtty_modem_control(mp, TIOCM_DTR, DMBIS);
break;
case TIOCCDTR: /* clear DTR */
mtty_modem_control(mp, TIOCM_DTR, DMBIC);
break;
case TIOCMSET: /* set modem lines */
mtty_modem_control(mp, *((int *)data), DMSET);
break;
case TIOCMBIS: /* bit set modem lines */
mtty_modem_control(mp, *((int *)data), DMBIS);
break;
case TIOCMBIC: /* bit clear modem lines */
mtty_modem_control(mp, *((int *)data), DMBIC);
break;
case TIOCMGET: /* get modem lines */
*((int *)data) = mtty_modem_control(mp, 0, DMGET);
break;
case TIOCGFLAGS:
*((int *)data) = mp->mp_openflags;
break;
case TIOCSFLAGS:
if( suser(p->p_ucred, &p->p_acflag) )
error = EPERM;
else
mp->mp_openflags = *((int *)data) &
(TIOCFLAG_SOFTCAR | TIOCFLAG_CLOCAL |
TIOCFLAG_CRTSCTS | TIOCFLAG_MDMBUF);
break;
default:
error = ENOTTY;
}
return(error);
}
/*
* Stop output, e.g., for ^S or output flush.
*/
void
mttystop(tp, flags)
struct tty *tp;
int flags;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(tp->t_dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)];
int s;
s = spltty();
if( ISSET(tp->t_state, TS_BUSY) ) {
if( !ISSET(tp->t_state, TS_TTSTOP) )
SET(tp->t_state, TS_FLUSH);
/*
* the transmit interrupt routine will disable transmit when it
* notices that MTTYF_STOP has been set.
*/
SET(mp->mp_flags, MTTYF_STOP);
}
splx(s);
}
/*
* Start output, after a stop.
*/
void
mtty_start(tp)
struct tty *tp;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(tp->t_dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)];
int s;
s = spltty();
/* we only need to do something if we are not already busy
* or delaying or stopped
*/
if( !ISSET(tp->t_state, TS_TTSTOP | TS_TIMEOUT | TS_BUSY) ) {
/* if we are sleeping and output has drained below
* low water mark, awaken
*/
if( tp->t_outq.c_cc <= tp->t_lowat ) {
if( ISSET(tp->t_state, TS_ASLEEP) ) {
CLR(tp->t_state, TS_ASLEEP);
wakeup(&tp->t_outq);
}
selwakeup(&tp->t_wsel);
}
/* if something to send, start transmitting
*/
if( tp->t_outq.c_cc ) {
mp->mp_txc = ndqb(&tp->t_outq, 0);
mp->mp_txp = tp->t_outq.c_cf;
SET(tp->t_state, TS_BUSY);
cd1400_enable_transmitter(mp->mp_cd1400, mp->mp_channel);
}
}
splx(s);
}
/*
* set/get modem line status
*
* bits can be: TIOCM_DTR, TIOCM_RTS, TIOCM_CTS, TIOCM_CD, TIOCM_RI, TIOCM_DSR
*
* note that DTR and RTS lines are exchanged, and that DSR is
* not available on the LC2+1Sp card (used as CD)
*
* only let them fiddle with RTS if CRTSCTS is not enabled
*/
int
mtty_modem_control(mp, bits, howto)
struct mtty_port *mp;
int bits;
int howto;
{
struct cd1400 *cd = mp->mp_cd1400;
struct tty *tp = mp->mp_tty;
int s, msvr;
s = spltty();
cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel);
switch(howto) {
case DMGET: /* get bits */
bits = 0;
bits |= TIOCM_LE;
msvr = cd1400_read_reg(cd, CD1400_MSVR1);
if( msvr & CD1400_MSVR1_RTS ) bits |= TIOCM_DTR;
msvr = cd1400_read_reg(cd, CD1400_MSVR2);
if( msvr & CD1400_MSVR2_DTR ) bits |= TIOCM_RTS;
if( msvr & CD1400_MSVR2_CTS ) bits |= TIOCM_CTS;
if( msvr & CD1400_MSVR2_RI ) bits |= TIOCM_RI;
if( msvr & CD1400_MSVR2_DSR ) bits |= (cd->cd_parmode ? TIOCM_CD : TIOCM_DSR);
if( msvr & CD1400_MSVR2_CD ) bits |= (cd->cd_parmode ? 0 : TIOCM_CD);
break;
case DMSET: /* reset bits */
if( !ISSET(tp->t_cflag, CRTSCTS) )
cd1400_write_reg(cd, CD1400_MSVR2, ((bits & TIOCM_RTS) ? CD1400_MSVR2_DTR : 0));
cd1400_write_reg(cd, CD1400_MSVR1, ((bits & TIOCM_DTR) ? CD1400_MSVR1_RTS : 0));
break;
case DMBIS: /* set bits */
if( (bits & TIOCM_RTS) && !ISSET(tp->t_cflag, CRTSCTS) )
cd1400_write_reg(cd, CD1400_MSVR2, CD1400_MSVR2_DTR);
if( bits & TIOCM_DTR )
cd1400_write_reg(cd, CD1400_MSVR1, CD1400_MSVR1_RTS);
break;
case DMBIC: /* clear bits */
if( (bits & TIOCM_RTS) && !ISSET(tp->t_cflag, CRTSCTS) )
cd1400_write_reg(cd, CD1400_MSVR2, 0);
if( bits & TIOCM_DTR )
cd1400_write_reg(cd, CD1400_MSVR1, 0);
break;
}
splx(s);
return(bits);
}
/*
* Set tty parameters, returns error or 0 on success
*/
int
mtty_param(tp, t)
struct tty *tp;
struct termios *t;
{
struct mtty_softc *ms = mtty_cd.cd_devs[MAGMA_CARD(tp->t_dev)];
struct mtty_port *mp = &ms->ms_port[MAGMA_PORT(tp->t_dev)];
struct cd1400 *cd = mp->mp_cd1400;
int rbpr, tbpr, rcor, tcor;
u_char mcor1 = 0, mcor2 = 0;
int s, opt;
if( t->c_ospeed && cd1400_compute_baud(t->c_ospeed, cd->cd_clock, &tcor, &tbpr) )
return(EINVAL);
if( t->c_ispeed && cd1400_compute_baud(t->c_ispeed, cd->cd_clock, &rcor, &rbpr) )
return(EINVAL);
s = spltty();
/* hang up the line if ospeed is zero, else raise DTR */
(void)mtty_modem_control(mp, TIOCM_DTR, (t->c_ospeed == 0 ? DMBIC : DMBIS));
/* select channel, done in mtty_modem_control() */
/* cd1400_write_reg(cd, CD1400_CAR, mp->mp_channel); */
/* set transmit speed */
if( t->c_ospeed ) {
cd1400_write_reg(cd, CD1400_TCOR, tcor);
cd1400_write_reg(cd, CD1400_TBPR, tbpr);
}
/* set receive speed */
if( t->c_ispeed ) {
cd1400_write_reg(cd, CD1400_RCOR, rcor);
cd1400_write_reg(cd, CD1400_RBPR, rbpr);
}
/* enable transmitting and receiving on this channel */
opt = CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTEN | CD1400_CCR_RCVEN;
cd1400_write_ccr(cd, opt);
/* set parity, data and stop bits */
opt = 0;
if( ISSET(t->c_cflag, PARENB) )
opt |= (ISSET(t->c_cflag, PARODD) ? CD1400_COR1_PARODD : CD1400_COR1_PARNORMAL);
if( !ISSET(t->c_iflag, INPCK) )
opt |= CD1400_COR1_NOINPCK; /* no parity checking */
if( ISSET(t->c_cflag, CSTOPB) )
opt |= CD1400_COR1_STOP2;
switch( t->c_cflag & CSIZE ) {
case CS5:
opt |= CD1400_COR1_CS5;
break;
case CS6:
opt |= CD1400_COR1_CS6;
break;
case CS7:
opt |= CD1400_COR1_CS7;
break;
default:
opt |= CD1400_COR1_CS8;
break;
}
cd1400_write_reg(cd, CD1400_COR1, opt);
/*
* enable Embedded Transmit Commands (for breaks)
* use the CD1400 automatic CTS flow control if CRTSCTS is set
*/
opt = CD1400_COR2_ETC;
if( ISSET(t->c_cflag, CRTSCTS) ) opt |= CD1400_COR2_CCTS_OFLOW;
cd1400_write_reg(cd, CD1400_COR2, opt);
cd1400_write_reg(cd, CD1400_COR3, MTTY_RX_FIFO_THRESHOLD);
cd1400_write_ccr(cd, CD1400_CCR_CMDCORCHG | CD1400_CCR_COR1 | CD1400_CCR_COR2 | CD1400_CCR_COR3);
cd1400_write_reg(cd, CD1400_COR4, CD1400_COR4_PFO_EXCEPTION);
cd1400_write_reg(cd, CD1400_COR5, 0);
/*
* if automatic RTS handshaking enabled, set DTR threshold
* (RTS and DTR lines are switched, CD1400 thinks its DTR)
*/
if( ISSET(t->c_cflag, CRTSCTS) )
mcor1 = MTTY_RX_DTR_THRESHOLD;
/* set up `carrier detect' interrupts */
if( cd->cd_parmode ) {
SET(mcor1, CD1400_MCOR1_DSRzd);
SET(mcor2, CD1400_MCOR2_DSRod);
} else {
SET(mcor1, CD1400_MCOR1_CDzd);
SET(mcor2, CD1400_MCOR2_CDod);
}
cd1400_write_reg(cd, CD1400_MCOR1, mcor1);
cd1400_write_reg(cd, CD1400_MCOR2, mcor2);
/* receive timeout 2ms */
cd1400_write_reg(cd, CD1400_RTPR, 2);
splx(s);
return(0);
}
/************************************************************************
*
* MBPP Routines
*
* mbpp_match match one mbpp device
* mbpp_attach attach mbpp devices
* mbppopen open mbpp device
* mbppclose close mbpp device
* mbppread read from mbpp
* mbppwrite write to mbpp
* mbppioctl do ioctl on mbpp
* mbppselect do select on mbpp
* mbpp_rw general rw routine
* mbpp_timeout rw timeout
* mbpp_start rw start after delay
* mbpp_send send data
* mbpp_recv recv data
*/
int
mbpp_match(parent, cf, args)
struct device *parent;
struct cfdata *cf;
void *args;
{
struct magma_softc *sc = (struct magma_softc *)parent;
return( args == mbpp_match && sc->ms_board->mb_npar && sc->ms_mbpp == NULL );
}
void
mbpp_attach(parent, dev, args)
struct device *parent;
struct device *dev;
void *args;
{
struct magma_softc *sc = (struct magma_softc *)parent;
struct mbpp_softc *ms = (struct mbpp_softc *)dev;
struct mbpp_port *mp;
int port;
sc->ms_mbpp = ms;
dprintf((" addr %p", ms));
for( port = 0 ; port < sc->ms_board->mb_npar ; port++ ) {
mp = &ms->ms_port[port];
callout_init(&mp->mp_timeout_ch);
callout_init(&mp->mp_start_ch);
if( sc->ms_ncd1190 )
mp->mp_cd1190 = &sc->ms_cd1190[port];
else
mp->mp_cd1400 = &sc->ms_cd1400[0];
}
ms->ms_nports = port;
printf(": %d port%s\n", port, port == 1 ? "" : "s");
}
/*
* open routine. returns zero if successful, else error code
*/
int
mbppopen(dev, flags, mode, p)
dev_t dev;
int flags;
int mode;
struct proc *p;
{
int card = MAGMA_CARD(dev);
int port = MAGMA_PORT(dev);
struct mbpp_softc *ms;
struct mbpp_port *mp;
int s;
if( card >= mbpp_cd.cd_ndevs ||
(ms = mbpp_cd.cd_devs[card]) == NULL || port >= ms->ms_nports )
return(ENXIO);
mp = &ms->ms_port[port];
s = spltty();
if( ISSET(mp->mp_flags, MBPPF_OPEN) ) {
splx(s);
return(EBUSY);
}
SET(mp->mp_flags, MBPPF_OPEN);
splx(s);
/* set defaults */
mp->mp_burst = MBPP_BURST;
mp->mp_timeout = mbpp_mstohz(MBPP_TIMEOUT);
mp->mp_delay = mbpp_mstohz(MBPP_DELAY);
/* init chips */
if( mp->mp_cd1400 ) { /* CD1400 */
struct cd1400 *cd = mp->mp_cd1400;
/* set up CD1400 channel */
s = spltty();
cd1400_write_reg(cd, CD1400_CAR, 0);
cd1400_write_ccr(cd, CD1400_CCR_CMDRESET);
cd1400_write_reg(cd, CD1400_LIVR, (1<<3));
splx(s);
} else { /* CD1190 */
mp->mp_flags = 0;
return (ENXIO);
}
return (0);
}
/*
* close routine. returns zero if successful, else error code
*/
int
mbppclose(dev, flag, mode, p)
dev_t dev;
int flag;
int mode;
struct proc *p;
{
struct mbpp_softc *ms = mbpp_cd.cd_devs[MAGMA_CARD(dev)];
struct mbpp_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
mp->mp_flags = 0;
return(0);
}
/*
* Read routine
*/
int
mbppread(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
return( mbpp_rw(dev, uio) );
}
/*
* Write routine
*/
int
mbppwrite(dev, uio, flags)
dev_t dev;
struct uio *uio;
int flags;
{
return( mbpp_rw(dev, uio) );
}
/*
* ioctl routine
*/
int
mbppioctl(dev, cmd, data, flags, p)
dev_t dev;
u_long cmd;
caddr_t data;
int flags;
struct proc *p;
{
struct mbpp_softc *ms = mbpp_cd.cd_devs[MAGMA_CARD(dev)];
struct mbpp_port *mp = &ms->ms_port[MAGMA_PORT(dev)];
struct mbpp_param *bp;
int error = 0;
int s;
switch(cmd) {
case MBPPIOCSPARAM:
bp = (struct mbpp_param *)data;
if( bp->bp_burst < MBPP_BURST_MIN || bp->bp_burst > MBPP_BURST_MAX ||
bp->bp_delay < MBPP_DELAY_MIN || bp->bp_delay > MBPP_DELAY_MIN ) {
error = EINVAL;
} else {
mp->mp_burst = bp->bp_burst;
mp->mp_timeout = mbpp_mstohz(bp->bp_timeout);
mp->mp_delay = mbpp_mstohz(bp->bp_delay);
}
break;
case MBPPIOCGPARAM:
bp = (struct mbpp_param *)data;
bp->bp_burst = mp->mp_burst;
bp->bp_timeout = mbpp_hztoms(mp->mp_timeout);
bp->bp_delay = mbpp_hztoms(mp->mp_delay);
break;
case MBPPIOCGSTAT:
/* XXX make this more generic */
s = spltty();
cd1400_write_reg(mp->mp_cd1400, CD1400_CAR, 0);
*(int *)data = cd1400_read_reg(mp->mp_cd1400, CD1400_PSVR);
splx(s);
break;
default:
error = ENOTTY;
}
return(error);
}
/*
* poll routine
*/
int
mbpppoll(dev, rw, p)
dev_t dev;
int rw;
struct proc *p;
{
return(ENODEV);
}
int
mbpp_rw(dev, uio)
dev_t dev;
struct uio *uio;
{
int card = MAGMA_CARD(dev);
int port = MAGMA_PORT(dev);
struct mbpp_softc *ms = mbpp_cd.cd_devs[card];
struct mbpp_port *mp = &ms->ms_port[port];
caddr_t buffer, ptr;
int buflen, cnt, len;
int s, error = 0;
int gotdata = 0;
if( uio->uio_resid == 0 )
return(0);
buflen = min(uio->uio_resid, mp->mp_burst);
buffer = malloc(buflen, M_DEVBUF, M_WAITOK);
if( buffer == NULL )
return(ENOMEM);
SET(mp->mp_flags, MBPPF_UIO);
/*
* start timeout, if needed
*/
if( mp->mp_timeout > 0 ) {
SET(mp->mp_flags, MBPPF_TIMEOUT);
callout_reset(&mp->mp_timeout_ch, mp->mp_timeout,
mbpp_timeout, mp);
}
len = cnt = 0;
while( uio->uio_resid > 0 ) {
len = min(buflen, uio->uio_resid);
ptr = buffer;
if( uio->uio_rw == UIO_WRITE ) {
error = uiomove(ptr, len, uio);
if( error ) break;
}
again: /* goto bad */
/* timed out? */
if( !ISSET(mp->mp_flags, MBPPF_UIO) )
break;
/*
* perform the operation
*/
if( uio->uio_rw == UIO_WRITE ) {
cnt = mbpp_send(mp, ptr, len);
} else {
cnt = mbpp_recv(mp, ptr, len);
}
if( uio->uio_rw == UIO_READ ) {
if( cnt ) {
error = uiomove(ptr, cnt, uio);
if( error ) break;
gotdata++;
}
else if( gotdata ) /* consider us done */
break;
}
/* timed out? */
if( !ISSET(mp->mp_flags, MBPPF_UIO) )
break;
/*
* poll delay?
*/
if( mp->mp_delay > 0 ) {
s = splsoftclock();
SET(mp->mp_flags, MBPPF_DELAY);
callout_reset(&mp->mp_start_ch, mp->mp_delay,
mbpp_start, mp);
error = tsleep(mp, PCATCH | PZERO, "mbppdelay", 0);
splx(s);
if( error ) break;
}
/*
* don't call uiomove again until we used all the data we grabbed
*/
if( uio->uio_rw == UIO_WRITE && cnt != len ) {
ptr += cnt;
len -= cnt;
cnt = 0;
goto again;
}
}
/*
* clear timeouts
*/
s = splsoftclock();
if( ISSET(mp->mp_flags, MBPPF_TIMEOUT) ) {
callout_stop(&mp->mp_timeout_ch);
CLR(mp->mp_flags, MBPPF_TIMEOUT);
}
if( ISSET(mp->mp_flags, MBPPF_DELAY) ) {
callout_stop(&mp->mp_start_ch);
CLR(mp->mp_flags, MBPPF_DELAY);
}
splx(s);
/*
* adjust for those chars that we uiomoved but never actually wrote
*/
if( uio->uio_rw == UIO_WRITE && cnt != len ) {
uio->uio_resid += (len - cnt);
}
free(buffer, M_DEVBUF);
return(error);
}
void
mbpp_timeout(arg)
void *arg;
{
struct mbpp_port *mp = arg;
CLR(mp->mp_flags, MBPPF_UIO | MBPPF_TIMEOUT);
wakeup(mp);
}
void
mbpp_start(arg)
void *arg;
{
struct mbpp_port *mp = arg;
CLR(mp->mp_flags, MBPPF_DELAY);
wakeup(mp);
}
int
mbpp_send(mp, ptr, len)
struct mbpp_port *mp;
caddr_t ptr;
int len;
{
int s;
struct cd1400 *cd = mp->mp_cd1400;
/* set up io information */
mp->mp_ptr = ptr;
mp->mp_cnt = len;
/* start transmitting */
s = spltty();
if( cd ) {
cd1400_write_reg(cd, CD1400_CAR, 0);
/* output strobe width ~1microsecond */
cd1400_write_reg(cd, CD1400_TBPR, 10);
/* enable channel */
cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTEN);
cd1400_write_reg(cd, CD1400_SRER, CD1400_SRER_TXRDY);
}
/* ZZzzz... */
tsleep(mp, PCATCH | PZERO, "mbpp_send", 0);
/* stop transmitting */
if( cd ) {
cd1400_write_reg(cd, CD1400_CAR, 0);
/* disable transmitter */
cd1400_write_reg(cd, CD1400_SRER, 0);
cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_XMTDIS);
/* flush fifo */
cd1400_write_ccr(cd, CD1400_CCR_CMDRESET | CD1400_CCR_FTF);
}
splx(s);
/* return number of chars sent */
return(len - mp->mp_cnt);
}
int
mbpp_recv(mp, ptr, len)
struct mbpp_port *mp;
caddr_t ptr;
int len;
{
int s;
struct cd1400 *cd = mp->mp_cd1400;
/* set up io information */
mp->mp_ptr = ptr;
mp->mp_cnt = len;
/* start receiving */
s = spltty();
if( cd ) {
int rcor, rbpr;
cd1400_write_reg(cd, CD1400_CAR, 0);
/* input strobe at 100kbaud (10microseconds) */
cd1400_compute_baud(100000, cd->cd_clock, &rcor, &rbpr);
cd1400_write_reg(cd, CD1400_RCOR, rcor);
cd1400_write_reg(cd, CD1400_RBPR, rbpr);
/* rx threshold */
cd1400_write_reg(cd, CD1400_COR3, MBPP_RX_FIFO_THRESHOLD);
cd1400_write_ccr(cd, CD1400_CCR_CMDCORCHG | CD1400_CCR_COR3);
/* enable channel */
cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_RCVEN);
cd1400_write_reg(cd, CD1400_SRER, CD1400_SRER_RXDATA);
}
/* ZZzzz... */
tsleep(mp, PCATCH | PZERO, "mbpp_recv", 0);
/* stop receiving */
if( cd ) {
cd1400_write_reg(cd, CD1400_CAR, 0);
/* disable receiving */
cd1400_write_reg(cd, CD1400_SRER, 0);
cd1400_write_ccr(cd, CD1400_CCR_CMDCHANCTL | CD1400_CCR_RCVDIS);
}
splx(s);
/* return number of chars received */
return(len - mp->mp_cnt);
}
int
mbpp_hztoms(h)
int h;
{
int m = h;
if( m > 0 )
m = m * 1000 / hz;
return(m);
}
int
mbpp_mstohz(m)
int m;
{
int h = m;
if( h > 0 ) {
h = h * hz / 1000;
if( h == 0 )
h = 1000 / hz;
}
return(h);
}
#endif /* NMAGMA */