Aren
/
NetBSD
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
NetBSD/gnu/usr.sbin/dbsym/Makefile

41 lines
957 B
Makefile
Raw Normal View History

If ${MKPIC} is not "no", then depend on the _pic versions of libbfd and libopcodes. Otherwise, depend on the regular library.
2003-04-10 02:38:24 +04:00
# $NetBSD: Makefile,v 1.8 2003/04/09 22:38:24 thorpej Exp $
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
.include <bsd.own.mk>
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
* Eliminate the USE_NEW_TOOLCHAIN variable. Instead, split it into two variables: TOOLCHAIN_MISSING -- set to "yes" on platforms for which there is no working in-tree toolchain (hppa, ns32k, sh5, x86_64). EXTERNAL_TOOLCHAIN -- if defined by the user, points to the root of an external toolchain (e.g. /usr/local/gnu). This enables the cross-build framework even for TOOLCHAIN_MISSING platforms. If TOOLCHAIN_MISSING is set to "yes", MKGDB, MKBFD, and MKGCC are all unconditionally set to "no", since the bits are not there to build. If EXTERNAL_TOOLCHAIN is set, MKGCC is unconditionally set to "no", since the external toolchain's compiler is not in-sync with the in-tree compiler support components (e.g. libgcc). * Set MACHINE_CPU much earlier in bsd.own.mk, so that more tests in that file can use it.
2002-09-18 03:18:25 +04:00
.if (defined(HOSTPROG) && \
(${TOOLCHAIN_MISSING} != "yes" || defined(EXTERNAL_TOOLCHAIN))) || \
${MKBFD} != "no"
- use NETBSDSRCDIR as appropriate - makefile lint (moving NOxx to top of file, include <bsd.own.mk> as necessary, ...)
2002-09-19 07:09:31 +04:00
TOP= ${NETBSDSRCDIR}/gnu
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
DIST= ${TOP}/dist/toolchain
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
PROG= dbsym
MAN= dbsym.8
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Make almost all tools compile and run properly on non-NetBSD hosts. (In particular, most tools now run correctly on Solaris 7.)
2002-01-29 13:20:28 +03:00
CPPFLAGS+= -I${BFDDIR} -I${DIST}/bfd -I${DIST}/binutils -I${DIST}/include
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
If ${MKPIC} is not "no", then depend on the _pic versions of libbfd and libopcodes. Otherwise, depend on the regular library.
2003-04-10 02:38:24 +04:00
.if !defined(HOSTPROG) && ${MKPIC} != "no"
DPADD+= ${BFDDIR}/libbfd_pic.a
.else
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
DPADD+= ${BFDDIR}/libbfd.a
If ${MKPIC} is not "no", then depend on the _pic versions of libbfd and libopcodes. Otherwise, depend on the regular library.
2003-04-10 02:38:24 +04:00
.endif
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
LDADD+= -L${BFDDIR} -lbfd
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
DPADD+= ${IBERTYDIR}/libiberty.a
LDADD+= -L${IBERTYDIR} -liberty
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
.ifndef HOSTPROG
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
.include "${TOP}/lib/libbfd/arch/${MACHINE_ARCH}/defs.mk"
- use NETBSDSRCDIR as appropriate - makefile lint (moving NOxx to top of file, include <bsd.own.mk> as necessary, ...)
2002-09-19 07:09:31 +04:00
BFDDIR!= cd ${TOP}/lib/libbfd && ${PRINTOBJDIR}
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
IBERTYDIR!= cd ${TOP}/lib/libiberty && ${PRINTOBJDIR}
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
CPPFLAGS+= -I${TOP}/lib/libbfd/arch/${MACHINE_ARCH} ${G_INCLUDES}
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
LDADD+= -lintl
DPADD+= ${LIBINTL}
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
.endif # HOSTPROG
* Eliminate the USE_NEW_TOOLCHAIN variable. Instead, split it into two variables: TOOLCHAIN_MISSING -- set to "yes" on platforms for which there is no working in-tree toolchain (hppa, ns32k, sh5, x86_64). EXTERNAL_TOOLCHAIN -- if defined by the user, points to the root of an external toolchain (e.g. /usr/local/gnu). This enables the cross-build framework even for TOOLCHAIN_MISSING platforms. If TOOLCHAIN_MISSING is set to "yes", MKGDB, MKBFD, and MKGCC are all unconditionally set to "no", since the bits are not there to build. If EXTERNAL_TOOLCHAIN is set, MKGCC is unconditionally set to "no", since the external toolchain's compiler is not in-sync with the in-tree compiler support components (e.g. libgcc). * Set MACHINE_CPU much earlier in bsd.own.mk, so that more tests in that file can use it.
2002-09-18 03:18:25 +04:00
.endif # MKBFD != no
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
Major overhaul of src/tools and host toolchain. Summary of changes: * Rewrite src/tools Make logic to work like the rest of the tree wrt "dependall" and "install". The old "make build" hack is gone. * Remove the MKTOOLS logic. This was linked to the "make build" hack, and was only needed because TOOLDIR originally had no writable default. * Redo the GNU configure/make logic to make it fit reasonably in a BSD make wrapper. Use new ${.ALLTARGETS} variable to scan for targets in $(srcdir), and mark them with .MADE: to prevent rebuilding. * Only build cross tools in src/tools; remove some messy logic in src/usr.* and src/gnu/usr.* that would do target filename rewriting (improves consistency and readability). * Add the ability to build cross gdb at tool build time by setting MKCROSSGDB (default no) to "yes" in mk.conf. * Add src/tools/groff and set up paths to work with this cross groff.
2001-11-13 02:16:17 +03:00
.ifndef HOSTPROG
New BFD-using dbsym(8) written by Simon Burge, with some code derived from the BFD-using mdsetimage(8). TODO: * Use loadfile(), rather than home-grown ELF parsing code (requires some changes to loadfile()). * Support a.out like the gwr's dbsym(8) (this comes for free when we switch to loadfile()).
2001-11-09 08:52:20 +03:00
.include <bsd.prog.mk>
.endif # HOSTPROG